EPA and SDN assist

From OSM Public Wiki
Revision as of 10:30, 3 July 2017 by Garciadeblas (talk | contribs)
Jump to: navigation, search

Introduction

OSM can manage, via the RO, the dataplane underlay conectivity through an external SDN network controller, without the need of SDN controller plugins in the VIM. The only requirement for the VIM is that it must able to use SRIOV and/or passthrough interfaces, and expose the assigned interfaces so that the RO can use them to create the underlay connectivity.

By default, this capability is disabled when a datacenter or VIM is added to OSM, but you can instruct OSM to take control of the underlay dataplane connectivity on behalf of the VIM, with the SDN assist capability. For that purpose, OSM-RO uses a library offered by openvim for this task. The library uses Openflow pro-active rules to configure the connectity in the switch. The current library includes plugins for FloodLight, ONOS and OpenDayLight OpenVIM installation (Release TWO)#Openflow_controller.

The required external components are:

  • An external SDN controller
  • A dataplane switch with Openflow capabilities that will connect the physical interfaces of the VIM compute nodes.
  • The mapping between the switch ports (identified by name) and the compute node interfaces (identified by host-id and PCI address)
  • Some VIMs as openstack requires admin credentials in order to be able to get the physical place of the SRIOV/passthrough VM interfaces

Adding a SDN controller to OSM

This is done through the RO CLI.

Enter in the RO container (lxc exec RO bash) and type

export OPENMANO_TENANT=osm   # Indicate the RO tenant to use

In order to set the information of an existing sdn controller, use the following sintax:

root@RO:~# openmano sdn-controller-create -h
usage: openmano sdn-controller-create [-h] [--verbose] [--debug]
                                     [--description DESCRIPTION] [--ip IP]
                                     [--port PORT] [--dpid DPID]
                                     [--type TYPE] [--user USER]
                                     [--passwd PASSWORD]
                                     name

positional arguments:
 name                  name of the SDN controller

optional arguments:
 -h, --help            show this help message and exit
 --verbose, -v         increase verbosity level. Use several times
 --debug, -d           show debug information
 --description DESCRIPTION
                       description of the SDN controller
 --ip IP               IP of the SDN controller
 --port PORT           Port of the SDN controller
 --dpid DPID           DPID of the dataplane switch controlled by this SDN
                       controller
 --type TYPE           Specify the SDN controller type. Valid types are
                       'opendaylight' and 'floodlight'
 --user USER           user credentials for the SDN controller
 --passwd PASSWORD     password credentials for the SDN controller


For example:

root@RO:~# openmano sdn-controller-create mySDN --ip=192.168.15.2 --port=8080 --dpid=56:55:12:12:12:12:12:12 --user sdnuser --passwd sdnpasswd --type 
onos
98113d4a-51b7-11e7-8f07-00163e1229e4   mySDN                ACTIVE

You can list the defined SDN controllers like this:

root@RO:~# openmano sdn-controller-list
{
   "sdn_controllers": [
       {
           "status": "ACTIVE", 
           "password": "sdnpasswd", 
           "uuid": "98113d4a-51b7-11e7-8f07-00163e1229e4", 
           "last_error": null, 
           "dpid": "56:55:12:12:12:12:12:12", 
           "version": null, 
           "user": "sdnuser", 
           "ip": "192.168.15.2", 
           "nets_with_same_vlan": "false", 
           "type": "onos", 
           "port": 8080, 
           "name": "mySDN"
       }
   ]
}

You can manage SDN controllers with sdn-controller-create/list/edit/delete Note that at SDN creation connectivity and credentials are not checked,

Asociate a SDN with the VIM

If we check the information of the datacenter we can see no information about the sdn in the config section:

root@RO:~# openmano datacenter-list test -vvv
datacenter:
   config: null
   created_at: '2017-06-02T07:55:41'
   description: test
   name: test
   type: openstack
   uuid: dfcd6ca2-4768-11e7-8f07-00163e1229e4
   vim_tenants:
   -   config:
           dataplane_physical_net: physnet_sriov
           use_floating_ip: true
       passwd: '******'
       user: osm
       vim_tenant_id: null
       vim_tenant_name: osm
   vim_url: http://10.0.0.12:5000/v2.0
   vim_url_admin: null

In order to add the sdn controller to the datacenter:

root@RO:~# openmano datacenter-edit test --sdn-controller mySDN
 Edit datacenter test (y/N)? y
dfcd6ca2-4768-11e7-8f07-00163e1229e4   test                2017-06-02T07:55:41 

And now we can see this information in the datacenter:

root@RO:~# openmano datacenter-list test -vvv
datacenter:
   config:
       sdn-controller: 98113d4a-51b7-11e7-8f07-00163e1229e4
   created_at: '2017-06-02T07:55:41'
   description: test
   name: test
   type: openstack
   uuid: dfcd6ca2-4768-11e7-8f07-00163e1229e4
   vim_tenants:
   -   config:
           dataplane_physical_net: physnet_sriov
           use_floating_ip: true
       passwd: '******'
       user: osm
       vim_tenant_id: null
       vim_tenant_name: osm
   vim_url: http://10.0.0.12:5000/v2.0
   vim_url_admin: null

In order to remove the sdn controller:

root@RO:~# openmano datacenter-edit test --sdn-controller null
 Edit datacenter test (y/N)? y
dfcd6ca2-4768-11e7-8f07-00163e1229e4   test                2017-06-02T07:55:41

Adding a port mapping

A sample of sdn port mapping can be found in sdn/sdn_port_mapping.yaml

root@RO:~# tail -n 24 RO/sdn/sdn_port_mapping.yaml
---
#The mapping is composed of a list of compute nodes. Each compute nodes has two elements:
#"compute_node": name to identify the compute node within the datacenter
#"ports": list of ports mapped to a switch for that compute node.
#The information to identify the SDN controller and the dataplane switch is obtained from the datacenter information
- compute_node:    "compute node 1"
  ports:
    #Each mapped port contains the following information:
    #"pci": pci address of the port in the compute node. This is a mandatory parameter
    #"switch_mac": MAC address of the corresponding port in the dataplane switch.
    #"switch_port": Openflow name of the port in the dataplane switch.
    #"switch_mac" or "switch_port" must be specified. Both of them could be specified
    - pci:         "0000:81:00.0"
      switch_port: "port-2/1"
    - pci:         "0000:81:00.1"
      switch_mac:  "52:54:00:94:21:22"
- compute_node:    "compute node 2"
  ports:
    - pci:         "0000:81:00.0"
      switch_port: "port-2/3"
      switch_mac:  "52:54:00:94:22:21"
    - pci:         "0000:81:00.1"
      switch_port: "port-2/4"
      switch_mac:  "52:54:00:94:22:22"

In order to populate the port-mapping:

root@RO:~# openmano datacenter-sdn-port-mapping-set testRO/sdn/sdn_port_mapping.yaml
sdn_port_mapping:
- {compute_node: compute node 1, ofc_id: 963b5616-4769-11e7-8f07-00163e1229e4, pci: '0000:81:00.0',
  region: dfcd6ca2-4768-11e7-8f07-00163e1229e4, switch_dpid: '00:01:64:00:6a:e6:b3:14',
  switch_mac: null, switch_port: port-2/1, uuid: 977b50f8-51b9-11e7-8f07-00163e1229e4}
- {compute_node: compute node 1, ofc_id: 963b5616-4769-11e7-8f07-00163e1229e4, pci: '0000:81:00.1',
  region: dfcd6ca2-4768-11e7-8f07-00163e1229e4, switch_dpid: '00:01:64:00:6a:e6:b3:14',
  switch_mac: '52:54:00:94:21:22', switch_port: null, uuid: 977b50f9-51b9-11e7-8f07-00163e1229e4}
- {compute_node: compute node 2, ofc_id: 963b5616-4769-11e7-8f07-00163e1229e4, pci: '0000:81:00.0',
  region: dfcd6ca2-4768-11e7-8f07-00163e1229e4, switch_dpid: '00:01:64:00:6a:e6:b3:14',
  switch_mac: '52:54:00:94:22:21', switch_port: port-2/3, uuid: 977b50fa-51b9-11e7-8f07-00163e1229e4}
- {compute_node: compute node 2, ofc_id: 963b5616-4769-11e7-8f07-00163e1229e4, pci: '0000:81:00.1',
  region: dfcd6ca2-4768-11e7-8f07-00163e1229e4, switch_dpid: '00:01:64:00:6a:e6:b3:14',
  switch_mac: '52:54:00:94:22:22', switch_port: port-2/4, uuid: 977b50fb-51b9-11e7-8f07-00163e1229e4}

To overwrite the port mapping the same instruction can be used.

To clear the port mapping:

root@RO:~# openmano datacenter-sdn-port-mapping-clear test
Clean SDN port mapping for datacenter dfcd6ca2-4768-11e7-8f07-00163e1229e4 (y/N)? y
{result: 4 deleted from of_port_mapping}

Managing dataplane networks with external conectivity

Create a new network in the VIM and an associated network for the SND assist

root@RO:~# openmano vim-net-create --name test_net --type data --datacenter test
d30315d5-4ed7-442b-94e4-cf81d058ae00   test_net             ACTIVE              

Now you can include in the network a port (and a vlan as optional parameter) of the dataplane switch that will provide access to an external element. As an additional parameter, the mac address of the external element can also be specified in this command using --mac

root@RO:~# openmano vim-net-sdn-attach test_net Te1/1 --vlan 300 --datacenter test
Success 062a50b4-51bd-11e7-9496-00163eb5e904

Now when listing the network we can see this port belongs to vim network and if we deploy a NS using dataplane interfaces connected to this network all of them will be able to communicate with the external element/network through the attached port.

root@RO:~# openmano vim-net-list --datacenter test test_net
d30315d5-4ed7-442b-94e4-cf81d058ae00   test_net             ACTIVE               2017-06-15T11:23:08Z
sdn_attached_ports:
-   switch_port: Te1/1
    uuid: 062a50b4-51bd-11e7-9496-00163eb5e904
    vlan: 300

In order to remove a port from a network you can use the --id option to remove a specific port from the network or --all to remove all of them:

root@RO:~# openmano vim-net-sdn-detach test_net --all --datacenter test  
Confirm action' (y/N)? y
Success
root@RO:~# openmano vim-net-list --datacenter test test_net
d30315d5-4ed7-442b-94e4-cf81d058ae00   test_net             ACTIVE               2017-06-15T11:23:08Z

Additional information