Juju installation (release 0)

From OSM Public Wiki
Revision as of 14:52, 20 April 2016 by Lopezgracia (talk | contribs)
Jump to: navigation, search

This document intent is to provide a practical way to reproduce the environment in Telefonica lab (TEF) aim at running the demo scenario for Mobile World Congress 2016. It is not an explanation or long term recommendation for using juju.

Initially setup 2 Ubuntu 14.04 LTS VMs with 4 vcpu, 4G RAM and 40GB drive. Create user juju in sudo group (usermod -a -G sudo juju)

  1. The first is juju client VM (or juju jump server) (10.95.172.10). This VM is only required for manual execution of juju commands and charms debugging.
  2. The second is juju server VM (10.95.172.193). This VM will receive commands from Juju client VM when doing manual testing, or directly from Rift.io Launchpad VM in OSM context. Juju charms will be deployed as containers in this VM

On juju client VM:

1. Install juju:

sudo apt-get install python-software-properties
sudo add-apt-repository ppa:juju/stable
sudo apt-get update
sudo apt-get install juju-quickstart juju-core

2. Configure the connection to juju server VM in manual provider mode: ensure to have the following in your ~/.juju/environements.yaml

environments:
 mwc16manual:
   admin-secret: nfvjuju
   bootstrap-host: 10.95.172.193
   bootstrap-user: juju
   default-series: trusty
   type: manual

Where: bootstrap-host: IP address of juju server VM bootstrap-user: user in juju server VM admin-secret: password of the bootstrap user

3. Execute the following commands to connect both VMs:

juju switch mwc16manual
juju bootstrap --upload-tools

4. As a nice optional add-on deploy juju-gui to graphically monitor juju status

juju deploy juju-gui --to 0

Once done you can connect via https to the IP of the juju client VM.



More information on the bootstrap process is available here: https://jujucharms.com/docs/1.25/config-manual

On juju server VM:

  • Configure it to access the management networks of openvim and openstack
  • Change the default lxc networks, as in the lab setup the default lxc network (10.0.3.0/24):
sudo apt-get install systemd-services lxc

Edit /etc/default/lxc-net to have something like :

LXC_BRIDGE="lxcbr0" 
LXC_ADDR="10.1.3.1"
LXC_NETMASK="255.255.255.0"
LXC_NETWORK="10.1.3.0/24"
LXC_DHCP_RANGE="10.1.3.2,10.1.3.254"



More about using juju : https://github.com/juju/cheatsheet

Charms for MWC :

Get the charms (do once) Let’s create a local repo of charms for convenience: ● mkdir -p ~/mwc16charms/trusty ● cd ~/mwc16charms/trusty ● git clone git@github.com:6WIND/LinuxPE.git vpe-router ● git clone -b clearwater-aio-proxy https://github.com/Metaswitch/clearwater-juju.git ● cp -rf clearwater-juju/charms/trusty/clearwater-aio-proxy/ .

To deploy ● cd ~/mwc16charms/ ● juju deploy local:trusty/vpe-router --to lxc:0 vpe1 ● juju deploy local:trusty/vpe-router --to lxc:0 vpe2 ● juju deploy local:trusty/vpe-router --to lxc:0 vpe3 ● juju deploy local:trusty/clearwater-aio-proxy --to lxc:0 ims-a ● juju deploy local:trusty/clearwater-aio-proxy --to lxc:0 ims-b

You can then configure/run actions on them.

Using the API: ● juju api-endpoints Will give you the IP:Port to connect the juju client API code to.