Juju installation (release 0)

This document intent is to provide a practical way to reproduce the environment in Telefonica lab (TEF) aim at running the demo scenario for Mobile World Congress 2016. It is not an explanation or long term recommendation for using juju.

Initially setup 2 Ubuntu 14.04 LTS VMs with 4 vcpu, 4G RAM and 40GB drive. Create user juju in sudo group (usermod -a -G sudo juju)

1. The first is juju jump server (or juju client) VM (10.95.172.10). This VM is only required for manual execution of juju commands and charms debugging.
2. The second is juju server VM (10.95.172.193). This VM will receive commands from Juju client VM when doing manual testing, or directly from Rift.io Launchpad VM in OSM context.

On juju client VM install juju:

sudo apt-get install python-software-properties
sudo add-apt-repository ppa:juju/stable
sudo apt-get update
sudo apt-get install juju-quickstart juju-core

On juju server VM: Configure it to access the different environment/networks. In TEF we use 10.0.3.0 which is the default lxc network so need to change that first: ● sudo apt-get install systemd-services lxc Edit /etc/default/lxc-net to have something like :

	LXC_BRIDGE="lxcbr0" 

LXC_ADDR="10.1.3.1" LXC_NETMASK="255.255.255.0" LXC_NETWORK="10.1.3.0/24" LXC_DHCP_RANGE="10.1.3.2,10.1.3.254" Adapt to you need if necessary. At this stage it is recommended to reboot to see if the networks are ok and resilient. Setting up Juju On the juju client ensure to have the following in your ~/.juju/environements.yaml

environments:

 mwc16manual:
   admin-secret: nfvjuju
   bootstrap-host: 10.95.172.193
   bootstrap-user: juju
   default-series: trusty
   type: manual

Then : ● juju switch mwc16manual ● juju bootstrap --upload-tools

More information on the bootstrap process is available here: https://jujucharms.com/docs/1.25/config-manual

As a nice optional add-on : ● juju deploy juju-gui --to 0 Once done you can connect via https to the IP of the server.

More about using juju : https://github.com/juju/cheatsheet

Charms for MWC :

Get the charms (do once) Let’s create a local repo of charms for convenience: ● mkdir -p ~/mwc16charms/trusty ● cd ~/mwc16charms/trusty ● git clone git@github.com:6WIND/LinuxPE.git vpe-router ● git clone -b clearwater-aio-proxy https://github.com/Metaswitch/clearwater-juju.git ● cp -rf clearwater-juju/charms/trusty/clearwater-aio-proxy/ .

To deploy ● cd ~/mwc16charms/ ● juju deploy local:trusty/vpe-router --to lxc:0 vpe1 ● juju deploy local:trusty/vpe-router --to lxc:0 vpe2 ● juju deploy local:trusty/vpe-router --to lxc:0 vpe3 ● juju deploy local:trusty/clearwater-aio-proxy --to lxc:0 ims-a ● juju deploy local:trusty/clearwater-aio-proxy --to lxc:0 ims-b

You can then configure/run actions on them.

Using the API: ● juju api-endpoints Will give you the IP:Port to connect the juju client API code to.