Talk:LXD configuration for OSM Release TWO

Summary

This is a work-in-progress.

TODO: Why?

LXD is a pure container hypervisor that runs unmodified Linux guest operating systems with VM-style operations at incredible speed and density. This makes it particularly well-suited for developing complex systems. This can be used to install OSM without tainting your host system with its dependencies. This is called nesting, where our host container can launch containers within itself.

As illustrated below, your Host System (a laptop, a virtual machine, etc), you launch the Host Container, with nesting enabled. Inside the Host Container, we'll launch the containers for OSM: SO, RO, and VCA.

+-----------------------------------+
|                                   |
|           Host System             |
|                                   |
| +-------------------------------+ |
| |                               | |
| |        Host Container         | |
| |                               | |
| | +------+  +------+  +-------+ | |
| | |      |  |      |  |       | | |
| | |  SO  |  |  RO  |  |  VCA  | | |
| | |      |  |      |  |       | | |
| | +------+  +------+  +-------+ | |
| +-------------------------------+ |
+-----------------------------------+

Installing LXD

In order to run LXD containers, you need to install lxd and zfs (Ubuntu-only?) for lxd's storage backend.

Ubuntu

sudo apt-get update
sudo apt-get install zfs lxd
newgrp lxd                   # required to log the user in the lxd group if lxd was just installed

Configuration

LXD

sudo lxd init --auto

Advanced

If you want finer-grain control of how LXD is configured, you can omit the `--auto` flag and change the default options:

sudo lxd init
 Name of the storage backend to use (dir or zfs) [default=zfs]:
 Create a new ZFS pool (yes/no) [default=yes]?
 Name of the new ZFS pool [default=lxd]:
 Would you like to use an existing block device (yes/no) [default=no]?
 Size in GB of the new loop device (1GB minimum) [default=15]:
 Would you like LXD to be available over the network (yes/no) [default=no]?
 Do you want to configure the LXD bridge (yes/no) [default=yes]?

Network Bridge

By default, LXD creates a bridge named lxdbr0. You can modify this bridge, such as changing the MTU, and these changes will be reflected on the interfaces of the containers managed by the host container.

Although further customization is possible, default options for LXD bridge configuration will work.

Check the MTU of the LXD bridge (lxdbr0) and the MTU of the default interface. If they are different, adjust the MTU of the LXD bridge accordingly to have the same MTU:

lxc list                         # This will drive initialization of lxdbr0
ip address show ens3             # In case ens3 is the default interface
ip address show lxdbr0
sudo ifconfig lxdbr0 mtu 1446    # Use the appropriate MTU value
sudo sed -i '/ifconfig lxdbr0 mtu/d' /etc/rc.local          # To make MTU change persistent between reboots
sudo sed -i "$ i ifconfig lxdbr0 mtu 1446" /etc/rc.local    # To make MTU change persistent between reboots. Use the appropriate MTU value.

Launching your host instance

Launch a container to host the OSM installation:

lxc launch ubuntu:16.04 osmr2 -c security.privileged=true -c security.nesting=

true

lxc exec osmr2 bash