installers/install_osm.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  19     echo -e "  OPTIONS"
  20     echo -e "     --uninstall:   uninstall OSM: remove the containers and delete NAT rules"
  21     echo -e "     --source:      install OSM from source code using the latest stable tag"
  22     echo -e "     -r <repo>:      use specified repository name for osm packages"
  23     echo -e "     -R <release>:   use specified release for osm packages"
  24     echo -e "     -u <repo base>: use specified repository url for osm packages"
  25     echo -e "     -k <repo key>:  use specified repository public key url"
  26     echo -e "     -b <refspec>:  install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  27     echo -e "                    -b master          (main dev branch)"
  28     echo -e "                    -b v2.0            (v2.0 branch)"
  29     echo -e "                    -b tags/v1.1.0     (a specific tag)"
  30     echo -e "                    ..."
  31     echo -e "     --develop:     (deprecated, use '-b master') install OSM from source code using the master branch"
  32     echo -e "     --nat:         install only NAT rules"
  33 #    echo -e "     --update:      update to the latest stable release or to the latest commit if using a specific branch"
  34     echo -e "     --showopts:    print chosen options and exit (only for debugging)"
  35     echo -e "     -y:            do not prompt for confirmation, assumes yes"
  36     echo -e "     -h / --help:   print this help"
  37 }
  38
  39 #Uninstall OSM: remove containers
  40 function uninstall(){
  41     echo -e "\nUninstalling OSM"
  42     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  43         $OSM_DEVOPS/jenkins/host/clean_container RO
  44         $OSM_DEVOPS/jenkins/host/clean_container VCA
  45         $OSM_DEVOPS/jenkins/host/clean_container SO
  46         #$OSM_DEVOPS/jenkins/host/clean_container UI
  47     else
  48         lxc stop RO && lxc delete RO
  49         lxc stop VCA && lxc delete VCA
  50         lxc stop SO-ub && lxc delete SO-ub
  51     fi
  52 }
  53
  54 #Configure NAT rules, based on the current IP addresses of containers
  55 function nat(){
  56     echo -e "\nChecking required packages: iptables-persistent"
  57     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
  58     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
  59     echo -e "\nConfiguring NAT rules"
  60     echo -e "   Required root privileges"
  61     sudo $OSM_DEVOPS/installers/nat_osm
  62 }
  63
  64 function FATAL(){
  65     echo "FATAL error: Cannot install OSM due to \"$1\""
  66     exit 1
  67 }
  68
  69 #Update RO, SO and UI:
  70 function update(){
  71     echo -e "\nUpdating components"
  72
  73     echo -e "     Updating RO"
  74     CONTAINER="RO"
  75     MDG="RO"
  76     INSTALL_FOLDER="/opt/openmano"
  77     echo -e "     Fetching the repo"
  78     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
  79     BRANCH=""
  80     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
  81     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
  82     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
  83     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
  84     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
  85     # COMMIT_ID either was  previously set with -b option, or is an empty string
  86     CHECKOUT_ID=$COMMIT_ID
  87     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
  88     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
  89     if [[ $CHECKOUT_ID == "tags/"* ]]; then
  90         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
  91     else
  92         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
  93     fi
  94     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
  95     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
  96         echo "         Nothing to be done."
  97     else
  98         echo "         Update required."
  99         lxc exec $CONTAINER -- service osm-ro stop
 100         lxc exec $CONTAINER -- git -C /opt/openmano stash
 101         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
 102         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
 103         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
 104         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
 105         lxc exec $CONTAINER -- service osm-ro start
 106     fi
 107     echo
 108
 109     echo -e "     Updating SO and UI"
 110     CONTAINER="SO-ub"
 111     MDG="SO"
 112     INSTALL_FOLDER=""   # To be filled in
 113     echo -e "     Fetching the repo"
 114     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 115     BRANCH=""
 116     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 117     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 118     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 119     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 120     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 121     # COMMIT_ID either was  previously set with -b option, or is an empty string
 122     CHECKOUT_ID=$COMMIT_ID
 123     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 124     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 125     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 126         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 127     else
 128         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 129     fi
 130     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 131     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 132         echo "         Nothing to be done."
 133     else
 134         echo "         Update required."
 135         # Instructions to be added
 136         # lxc exec SO-ub -- ...
 137     fi
 138     echo
 139 }
 140
 141 function so_is_up() {
 142     SO_IP=$1
 143     time=0
 144     step=5
 145     timelength=300
 146     while [ $time -le $timelength ]
 147     do
 148         if [[ `curl -k -X GET   https://$SO_IP:8008/api/operational/vcs/info \
 149                 -H 'accept: application/vnd.yang.data+json' \
 150                 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
 151                 -H 'cache-control: no-cache' 2> /dev/null | jq  '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
 152         then
 153             echo "RW.Restconf running....SO is up"
 154             return 0
 155         fi
 156
 157         sleep $step
 158         echo -n "."
 159         time=$((time+step))
 160     done
 161
 162     FATAL "OSM Failed to startup"
 163 }
 164
 165 #Configure VCA, SO and RO with the initial configuration:
 166 #  RO -> tenant:osm, logs to be sent to SO
 167 #  VCA -> juju-password
 168 #  SO -> route to Juju Controller, add RO account, add VCA account
 169 function configure(){
 170     #Configure components
 171     echo -e "\nConfiguring components"
 172     . $OSM_DEVOPS/installers/export_ips
 173
 174     echo -e "       Configuring RO"
 175     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
 176     lxc exec RO -- service osm-ro restart
 177
 178     time=0; step=2; timelength=20; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
 179
 180     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 181     RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
 182     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 183     lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
 184     #lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
 185
 186     echo -e "       Configuring VCA"
 187     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 188     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 189     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 190
 191     echo -e "       Configuring SO"
 192     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 193     sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
 194
 195     # make journaling persistent
 196     lxc exec SO-ub -- mkdir -p /var/log/journal
 197     lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
 198     lxc exec SO-ub -- systemctl restart systemd-journald
 199
 200     echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
 201
 202     lxc exec SO-ub -- systemctl restart launchpad
 203
 204     so_is_up $SO_CONTAINER_IP
 205
 206     #delete existing config agent (could be there on reconfigure)
 207     curl -k --request DELETE \
 208       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
 209       --header 'accept: application/vnd.yang.data+json' \
 210       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 211       --header 'cache-control: no-cache' \
 212       --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 213
 214     result=$(curl -k --request POST \
 215       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 216       --header 'accept: application/vnd.yang.data+json' \
 217       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 218       --header 'cache-control: no-cache' \
 219       --header 'content-type: application/vnd.yang.data+json' \
 220       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
 221     [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
 222
 223     #R1/R2 config line
 224     #result=$(curl -k --request PUT \
 225     #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 226     #  --header 'accept: application/vnd.yang.data+json' \
 227     #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 228     #  --header 'cache-control: no-cache' \
 229     #  --header 'content-type: application/vnd.yang.data+json' \
 230     #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
 231
 232     result=$(curl -k --request PUT \
 233       --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
 234       --header 'accept: application/vnd.yang.data+json' \
 235       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 236       --header 'cache-control: no-cache'   \
 237       --header 'content-type: application/vnd.yang.data+json' \
 238       --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
 239     [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
 240
 241     result=$(curl -k --request PATCH \
 242       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
 243       --header 'accept: application/vnd.yang.data+json' \
 244       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 245       --header 'cache-control: no-cache'   \
 246       --header 'content-type: application/vnd.yang.data+json' \
 247       --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
 248     [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
 249
 250     result=$(curl -k --request PATCH \
 251       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
 252       --header 'accept: application/vnd.yang.data+json' \
 253       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 254       --header 'cache-control: no-cache'   \
 255       --header 'content-type: application/vnd.yang.data+json' \
 256       --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
 257     [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
 258
 259     lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
 260 auto lo:1
 261 iface lo:1 inet static
 262         address  $DEFAULT_IP
 263         netmask 255.255.255.255
 264 EOF
 265     lxc exec SO-ub ifup lo:1
 266
 267 }
 268
 269 function install_lxd() {
 270     lxd init --auto
 271     lxd waitready
 272     systemctl stop lxd-bridge
 273     systemctl --system daemon-reload
 274     systemctl enable lxd-bridge
 275     systemctl start lxd-bridge
 276 }
 277
 278 function ask_user(){
 279     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 280     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 281     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 282     read -e -p "$1" USER_CONFIRMATION
 283     while true ; do
 284         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 285         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 286         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 287         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 288         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 289     done
 290 }
 291
 292 UNINSTALL=""
 293 DEVELOP=""
 294 NAT=""
 295 UPDATE=""
 296 RECONFIGURE=""
 297 TEST_INSTALLER=""
 298 LXD=""
 299 SHOWOPTS=""
 300 COMMIT_ID=""
 301 ASSUME_YES=""
 302 INSTALL_FROM_SOURCE=""
 303 RELEASE="-R ReleaseTHREE"
 304
 305 while getopts ":hy-:b:r:k:u:R:" o; do
 306     case "${o}" in
 307         h)
 308             usage && exit 0
 309             ;;
 310         b)
 311             COMMIT_ID=${OPTARG}
 312             ;;
 313         r)
 314             REPOSITORY="-r ${OPTARG}"
 315             ;;
 316         R)
 317             RELEASE="-R ${OPTARG}"
 318             ;;
 319         k)
 320             REPOSITORY_KEY="-k ${OPTARG}"
 321             ;;
 322         u)
 323             REPOSITORY_BASE="-u ${OPTARG}"
 324             ;;
 325         -)
 326             [ "${OPTARG}" == "help" ] && usage && exit 0
 327             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
 328             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 329             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 330             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 331             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 332             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 333             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 334             [ "${OPTARG}" == "lxd" ] && LXD="y" && continue
 335             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 336             echo -e "Invalid option: '--$OPTARG'\n" >&2
 337             usage && exit 1
 338             ;;
 339         \?)
 340             echo -e "Invalid option: '-$OPTARG'\n" >&2
 341             usage && exit 1
 342             ;;
 343         y)
 344             ASSUME_YES="y"
 345             ;;
 346         *)
 347             usage && exit 1
 348             ;;
 349     esac
 350 done
 351
 352 if [ -n "$SHOWOPTS" ]; then
 353     echo "DEVELOP=$DEVELOP"
 354     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 355     echo "UNINSTALL=$UNINSTALL"
 356     echo "NAT=$NAT"
 357     echo "UPDATE=$UPDATE"
 358     echo "RECONFIGURE=$RECONFIGURE"
 359     echo "TEST_INSTALLER=$TEST_INSTALLER"
 360     echo "LXD=$LXD"
 361     echo "SHOWOPTS=$SHOWOPTS"
 362     echo "Install from specific refspec (-b): $COMMIT_ID"
 363     exit 0
 364 fi
 365
 366 # if develop, we force master
 367 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 368
 369 # forcing source from master removed. Now only install from source when explicit
 370 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
 371
 372 if [ -n "$TEST_INSTALLER" ]; then
 373     echo -e "\nUsing local devops repo for OSM installation"
 374     TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 375 else
 376     echo -e "\nCreating temporary dir for OSM installation"
 377     TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 378     trap 'rm -rf "$TEMPDIR"' EXIT
 379 fi
 380
 381 need_packages="git jq"
 382 for package in $need_packages; do
 383     echo -e "Checking required packages: $package"
 384     dpkg -l $package &>/dev/null \
 385         || ! echo -e "     $package not installed.\nInstalling $package requires root privileges" \
 386         || sudo apt-get install -y $package \
 387         || FATAL "failed to install $package"
 388 done
 389
 390 if [ -z "$TEST_INSTALLER" ]; then
 391     echo -e "\nCloning devops repo temporarily"
 392     git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
 393     RC_CLONE=$?
 394 fi
 395
 396 echo -e "\nGuessing the current stable release"
 397 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
 398 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
 399 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
 400 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
 401 [ -z "$TEST_INSTALLER" ] && git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
 402
 403 OSM_DEVOPS=$TEMPDIR
 404 OSM_JENKINS="$TEMPDIR/jenkins"
 405 . $OSM_JENKINS/common/all_funcs
 406
 407 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
 408 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
 409 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
 410 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
 411
 412 #Installation starts here
 413 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
 414 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
 415     ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
 416 fi
 417
 418 echo -e "\nChecking required packages: wget, curl, tar"
 419 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt-get install -y wget curl tar
 420
 421 echo -e "Checking required packages: lxd"
 422 lxd --version &>/dev/null || FATAL "lxd not present, exiting."
 423 [ -n "$LXD" ] && echo -e "\nConfiguring lxd" && install_lxd
 424
 425 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README.txt &> /dev/null
 426
 427 # use local devops for containers
 428 export OSM_USE_LOCAL_DEVOPS=true
 429 if [ -z "$INSTALL_FROM_SOURCE" ]; then
 430     echo -e "\nCreating the containers and installing from binaries ..."
 431     $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
 432     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
 433     $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
 434     $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
 435 else #install from source
 436     echo -e "\nCreating the containers and building from source ..."
 437     $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
 438     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
 439     $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
 440     $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
 441 fi
 442
 443 #Install iptables-persistent and configure NAT rules
 444 nat
 445
 446 #Configure components
 447 configure
 448
 449 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README2.txt &> /dev/null
 450 echo -e "\nDONE"