installers/install_osm.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  19     echo -e "  OPTIONS"
  20     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  21     echo -e "     --source:       install OSM from source code using the latest stable tag"
  22     echo -e "     -r <repo>:      use specified repository name for osm packages"
  23     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  24     echo -e "     -u <repo base>: use specified repository url for osm packages"
  25     echo -e "     -k <repo key>:  use specified repository public key url"
  26     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  27     echo -e "                     -b master          (main dev branch)"
  28     echo -e "                     -b v2.0            (v2.0 branch)"
  29     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  30     echo -e "                     ..."
  31     echo -e "     --lxdimages:    download lxd images from OSM repository instead of creating them from scratch"
  32     echo -e "     -l <lxd_repo>:  use specified repository url for lxd images"
  33     echo -e "     --vimemu:       additionally fetch, build, and deploy the VIM emulator as a docker container"
  34     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  35 #    echo -e "     --reconfigure:  reconfigure the modules (DO NOT change NAT rules)"
  36     echo -e "     --nat:          install only NAT rules"
  37     echo -e "     --noconfigure:  DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
  38 #    echo -e "     --update:       update to the latest stable release or to the latest commit if using a specific branch"
  39     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  40     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  41     echo -e "     -h / --help:    print this help"
  42 }
  43
  44 #Uninstall OSM: remove containers
  45 function uninstall(){
  46     echo -e "\nUninstalling OSM"
  47     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  48         $OSM_DEVOPS/jenkins/host/clean_container RO
  49         $OSM_DEVOPS/jenkins/host/clean_container VCA
  50         $OSM_DEVOPS/jenkins/host/clean_container SO
  51         #$OSM_DEVOPS/jenkins/host/clean_container UI
  52     else
  53         lxc stop RO && lxc delete RO
  54         lxc stop VCA && lxc delete VCA
  55         lxc stop SO-ub && lxc delete SO-ub
  56     fi
  57     echo -e "\nDeleting imported lxd images if they exist"
  58     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
  59     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
  60     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
  61     return 0
  62 }
  63
  64 #Configure NAT rules, based on the current IP addresses of containers
  65 function nat(){
  66     echo -e "\nChecking required packages: iptables-persistent"
  67     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
  68     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
  69     echo -e "\nConfiguring NAT rules"
  70     echo -e "   Required root privileges"
  71     sudo $OSM_DEVOPS/installers/nat_osm
  72 }
  73
  74 function FATAL(){
  75     echo "FATAL error: Cannot install OSM due to \"$1\""
  76     exit 1
  77 }
  78
  79 #Update RO, SO and UI:
  80 function update(){
  81     echo -e "\nUpdating components"
  82
  83     echo -e "     Updating RO"
  84     CONTAINER="RO"
  85     MDG="RO"
  86     INSTALL_FOLDER="/opt/openmano"
  87     echo -e "     Fetching the repo"
  88     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
  89     BRANCH=""
  90     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
  91     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
  92     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
  93     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
  94     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
  95     # COMMIT_ID either was  previously set with -b option, or is an empty string
  96     CHECKOUT_ID=$COMMIT_ID
  97     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
  98     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
  99     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 100         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 101     else
 102         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 103     fi
 104     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 105     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 106         echo "         Nothing to be done."
 107     else
 108         echo "         Update required."
 109         lxc exec $CONTAINER -- service osm-ro stop
 110         lxc exec $CONTAINER -- git -C /opt/openmano stash
 111         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
 112         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
 113         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
 114         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
 115         lxc exec $CONTAINER -- service osm-ro start
 116     fi
 117     echo
 118
 119     echo -e "     Updating SO and UI"
 120     CONTAINER="SO-ub"
 121     MDG="SO"
 122     INSTALL_FOLDER=""   # To be filled in
 123     echo -e "     Fetching the repo"
 124     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 125     BRANCH=""
 126     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 127     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 128     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 129     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 130     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 131     # COMMIT_ID either was  previously set with -b option, or is an empty string
 132     CHECKOUT_ID=$COMMIT_ID
 133     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 134     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 135     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 136         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 137     else
 138         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 139     fi
 140     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 141     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 142         echo "         Nothing to be done."
 143     else
 144         echo "         Update required."
 145         # Instructions to be added
 146         # lxc exec SO-ub -- ...
 147     fi
 148     echo
 149 }
 150
 151 function so_is_up() {
 152     if [ -n "$1" ]; then
 153         SO_IP=$1
 154     else
 155         SO_IP=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
 156     fi
 157     time=0
 158     step=5
 159     timelength=300
 160     while [ $time -le $timelength ]
 161     do
 162         if [[ `curl -k -X GET   https://$SO_IP:8008/api/operational/vcs/info \
 163                 -H 'accept: application/vnd.yang.data+json' \
 164                 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
 165                 -H 'cache-control: no-cache' 2> /dev/null | jq  '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
 166         then
 167             echo "RW.Restconf running....SO is up"
 168             return 0
 169         fi
 170
 171         sleep $step
 172         echo -n "."
 173         time=$((time+step))
 174     done
 175
 176     FATAL "OSM Failed to startup. SO failed to startup"
 177 }
 178
 179 function vca_is_up() {
 180     if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
 181             echo "VCA is up and running"
 182             return 0
 183     fi
 184
 185     FATAL "OSM Failed to startup. VCA failed to startup"
 186 }
 187
 188 function ro_is_up() {
 189     if [ -n "$1" ]; then
 190         RO_IP=$1
 191     else
 192         RO_IP=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
 193     fi
 194     time=0
 195     step=2
 196     timelength=20
 197     while [ $time -le $timelength ]; do
 198         if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
 199             echo "RO is up and running"
 200             return 0
 201         fi
 202         sleep $step
 203         echo -n "."
 204         time=$((time+step))
 205     done
 206
 207     FATAL "OSM Failed to startup. RO failed to startup"
 208 }
 209
 210
 211 function configure_RO(){
 212     . $OSM_DEVOPS/installers/export_ips
 213     echo -e "       Configuring RO"
 214     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
 215     lxc exec RO -- service osm-ro restart
 216
 217     ro_is_up
 218
 219     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 220     lxc exec RO -- openmano tenant-create osm > /dev/null
 221     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 222     lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
 223     lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
 224 }
 225
 226 function configure_VCA(){
 227     echo -e "       Configuring VCA"
 228     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 229     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 230 }
 231
 232 function configure_SOUI(){
 233     . $OSM_DEVOPS/installers/export_ips
 234     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 235     RO_TENANT_ID=`lxc exec RO -- openmano tenant-list osm |awk '{print $1}'`
 236
 237     echo -e "       Configuring SO"
 238     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 239     sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
 240     # make journaling persistent
 241     lxc exec SO-ub -- mkdir -p /var/log/journal
 242     lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
 243     lxc exec SO-ub -- systemctl restart systemd-journald
 244
 245     echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
 246
 247     lxc exec SO-ub -- systemctl restart launchpad
 248
 249     so_is_up $SO_CONTAINER_IP
 250
 251     #delete existing config agent (could be there on reconfigure)
 252     curl -k --request DELETE \
 253       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
 254       --header 'accept: application/vnd.yang.data+json' \
 255       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 256       --header 'cache-control: no-cache' \
 257       --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 258
 259     result=$(curl -k --request POST \
 260       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 261       --header 'accept: application/vnd.yang.data+json' \
 262       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 263       --header 'cache-control: no-cache' \
 264       --header 'content-type: application/vnd.yang.data+json' \
 265       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
 266     [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
 267
 268     #R1/R2 config line
 269     #result=$(curl -k --request PUT \
 270     #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 271     #  --header 'accept: application/vnd.yang.data+json' \
 272     #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 273     #  --header 'cache-control: no-cache' \
 274     #  --header 'content-type: application/vnd.yang.data+json' \
 275     #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
 276
 277     result=$(curl -k --request PUT \
 278       --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
 279       --header 'accept: application/vnd.yang.data+json' \
 280       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 281       --header 'cache-control: no-cache'   \
 282       --header 'content-type: application/vnd.yang.data+json' \
 283       --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
 284     [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
 285
 286     result=$(curl -k --request PATCH \
 287       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
 288       --header 'accept: application/vnd.yang.data+json' \
 289       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 290       --header 'cache-control: no-cache'   \
 291       --header 'content-type: application/vnd.yang.data+json' \
 292       --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
 293     [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
 294
 295     result=$(curl -k --request PATCH \
 296       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
 297       --header 'accept: application/vnd.yang.data+json' \
 298       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 299       --header 'cache-control: no-cache'   \
 300       --header 'content-type: application/vnd.yang.data+json' \
 301       --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
 302     [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
 303
 304     lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
 305 auto lo:1
 306 iface lo:1 inet static
 307         address  $DEFAULT_IP
 308         netmask 255.255.255.255
 309 EOF
 310     lxc exec SO-ub ifup lo:1
 311 }
 312
 313 #Configure RO, VCA, and SO with the initial configuration:
 314 #  RO -> tenant:osm, logs to be sent to SO
 315 #  VCA -> juju-password
 316 #  SO -> route to Juju Controller, add RO account, add VCA account
 317 function configure(){
 318     #Configure components
 319     echo -e "\nConfiguring components"
 320     configure_RO
 321     configure_VCA
 322     configure_SOUI
 323 }
 324
 325 function install_lxd() {
 326     sudo apt-get update
 327     sudo apt-get install -y lxd
 328     newgrp lxd
 329     lxd init --auto
 330     lxd waitready
 331     lxc network create lxdbr0 ipv4.address=auto ipv4.nat=true ipv6.address=none ipv6.nat=false
 332     DEFAULT_INTERFACE=$(route -n | awk '$1~/^0.0.0.0/ {print $8}')
 333     DEFAULT_MTU=$( ip addr show $DEFAULT_INTERFACE | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
 334     lxc profile device set default eth0 mtu $DEFAULT_MTU
 335     #sudo systemctl stop lxd-bridge
 336     #sudo systemctl --system daemon-reload
 337     #sudo systemctl enable lxd-bridge
 338     #sudo systemctl start lxd-bridge
 339 }
 340
 341 function ask_user(){
 342     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 343     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 344     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 345     read -e -p "$1" USER_CONFIRMATION
 346     while true ; do
 347         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 348         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 349         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 350         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 351         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 352     done
 353 }
 354
 355 function launch_container_from_lxd(){
 356     export OSM_MDG=$1
 357     OSM_load_config
 358     export OSM_BASE_IMAGE=$2
 359     if ! container_exists $OSM_BUILD_CONTAINER; then
 360         CONTAINER_OPTS=""
 361         [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.privileged=true"
 362         [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.nesting=true"
 363         create_container $OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
 364         wait_container_up $OSM_BUILD_CONTAINER
 365     fi
 366 }
 367
 368 function install_osmclient(){
 369     CLIENT_RELEASE=${RELEASE#"-R "}
 370     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 371     CLIENT_REPOSITORY="stable"
 372     [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE="-u https://osm-download.etsi.org/repository/osm/debian"
 373     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 374     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 375     curl $key_location | sudo apt-key add -
 376     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
 377     sudo apt-get update
 378     sudo apt-get install -y python-osmclient
 379     export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 380     export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 381     echo -e "\nOSM client installed"
 382     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 383     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 384     echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 385 }
 386
 387 function install_from_lxdimages(){
 388     LXD_RELEASE=${RELEASE#"-R "}
 389     LXD_IMAGE_DIR="$(mktemp -d -q --tmpdir "osmimages.XXXXXX")"
 390     trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
 391     wget -O $LXD_IMAGE_DIR/osm-ro.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.tar.gz
 392     echo -e "\nDeleting previous lxd images if they exist"
 393     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
 394     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
 395     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
 396     echo -e "\nImporting osm-ro"
 397     lxc image import $LXD_IMAGE_DIR/osm-ro.tar.gz --alias osm-ro
 398     rm -f $LXD_IMAGE_DIR/osm-ro.tar.gz
 399     wget -O $LXD_IMAGE_DIR/osm-vca.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.tar.gz
 400     echo -e "\nImporting osm-vca"
 401     lxc image import $LXD_IMAGE_DIR/osm-vca.tar.gz --alias osm-vca
 402     rm -f $LXD_IMAGE_DIR/osm-vca.tar.gz
 403     echo -e "\nImporting osm-soui"
 404     wget -O $LXD_IMAGE_DIR/osm-soui.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.tar.gz
 405     lxc image import $LXD_IMAGE_DIR/osm-soui.tar.gz --alias osm-soui
 406     rm -f $LXD_IMAGE_DIR/osm-soui.tar.gz
 407     launch_container_from_lxd RO osm-ro
 408     ro_is_up && track RO
 409     launch_container_from_lxd VCA osm-vca
 410     vca_is_up && track VCA
 411     launch_container_from_lxd SO osm-soui
 412     #so_is_up && track SOUI
 413     track SOUI
 414 }
 415
 416 function install_docker_ce() {
 417     # installs and configures Docker CE
 418     echo "Installing Docker CE ..."
 419     sudo apt-get -qq update
 420     sudo apt-get install -y apt-transport-https ca-certificates software-properties-common
 421     curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
 422     sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
 423     sudo apt-get -qq update
 424     sudo apt-get install -y docker-ce
 425     echo "Adding user to group 'docker'"
 426     sudo groupadd -f docker
 427     sudo usermod -aG docker $USER
 428     echo "... Docker CE installation done"
 429     sleep 2
 430     sudo service docker restart
 431     echo "... restarted Docker service"
 432 }
 433
 434 function install_vimemu() {
 435     # install Docker
 436     install_docker_ce
 437     # clone vim-emu repository (attention: branch is currently master only)
 438     echo "Cloning vim-emu repository ..."
 439     git clone https://osm.etsi.org/gerrit/osm/vim-emu.git
 440     # build vim-emu docker
 441     echo "Building vim-emu Docker container..."
 442     sudo docker build -t vim-emu-img -f vim-emu/Dockerfile vim-emu/
 443     # start vim-emu container as daemon
 444     echo "Starting vim-emu Docker container 'vim-emu' ..."
 445     sudo docker run --name vim-emu -t -d --rm --privileged --pid='host' -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
 446     echo "Waiting for 'vim-emu' container to start ..."
 447     sleep 5
 448     export VIMEMU_HOSTNAME=$(sudo docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vim-emu)
 449     echo "vim-emu running at $VIMEMU_HOSTNAME ..."
 450     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 451     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 452     echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 453     echo -e "You might be interested in adding the following vim-emu env variables to your .bashrc file:"
 454     echo "     export VIMEMU_HOSTNAME=${VIMEMU_HOSTNAME}"
 455     echo -e "\nTo add the emulated VIM to OSM you should do:"
 456     echo "     osm vim-create --name emu-vim1 --user username --password password --auth_url http://$VIMEMU_HOSTNAME:6001/v2.0 --tenant tenantName --account_type openstack"
 457 }
 458
 459 function dump_vars(){
 460     echo "DEVELOP=$DEVELOP"
 461     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 462     echo "UNINSTALL=$UNINSTALL"
 463     echo "NAT=$NAT"
 464     echo "UPDATE=$UPDATE"
 465     echo "RECONFIGURE=$RECONFIGURE"
 466     echo "TEST_INSTALLER=$TEST_INSTALLER"
 467     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 468     echo "INSTALL_LXD=$INSTALL_LXD"
 469     echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
 470     echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
 471     echo "RELEASE=$RELEASE"
 472     echo "REPOSITORY=$REPOSITORY"
 473     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 474     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 475     echo "NOCONFIGURE=$NOCONFIGURE"
 476     echo "SHOWOPTS=$SHOWOPTS"
 477     echo "Install from specific refspec (-b): $COMMIT_ID"
 478 }
 479
 480 function track(){
 481     ctime=`date +%s`
 482     duration=$((ctime - SESSION_ID))
 483     url="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
 484     #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
 485     event_name="bin"
 486     [ -n "$INSTALL_FROM_SOURCE" ] && event_name="src"
 487     [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name="lxd"
 488     event_name="${event_name}_$1"
 489     url="${url}&event=${event_name}&ce_duration=${duration}"
 490     wget -q -O /dev/null $url
 491 }
 492
 493 UNINSTALL=""
 494 DEVELOP=""
 495 NAT=""
 496 UPDATE=""
 497 RECONFIGURE=""
 498 TEST_INSTALLER=""
 499 INSTALL_LXD=""
 500 SHOWOPTS=""
 501 COMMIT_ID=""
 502 ASSUME_YES=""
 503 INSTALL_FROM_SOURCE=""
 504 RELEASE="-R ReleaseTHREE"
 505 INSTALL_VIMEMU=""
 506 INSTALL_FROM_LXDIMAGES=""
 507 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 508 NOCONFIGURE=""
 509 RELEASE_DAILY=""
 510 SESSION_ID=`date +%s`
 511
 512 while getopts ":hy-:b:r:k:u:R:l:" o; do
 513     case "${o}" in
 514         h)
 515             usage && exit 0
 516             ;;
 517         b)
 518             COMMIT_ID=${OPTARG}
 519             ;;
 520         r)
 521             REPOSITORY="-r ${OPTARG}"
 522             ;;
 523         R)
 524             RELEASE="-R ${OPTARG}"
 525             ;;
 526         k)
 527             REPOSITORY_KEY="-k ${OPTARG}"
 528             ;;
 529         u)
 530             REPOSITORY_BASE="-u ${OPTARG}"
 531             ;;
 532         l)
 533             LXD_REPOSITORY_BASE="${OPTARG}"
 534             ;;
 535         -)
 536             [ "${OPTARG}" == "help" ] && usage && exit 0
 537             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
 538             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 539             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 540             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 541             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 542             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 543             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 544             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 545             [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES="y" && continue
 546             [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
 547             [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE="y" && continue
 548             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 549             [ "${OPTARG}" == "daily" ] && RELEASE_DAILY="y" && continue
 550             echo -e "Invalid option: '--$OPTARG'\n" >&2
 551             usage && exit 1
 552             ;;
 553         \?)
 554             echo -e "Invalid option: '-$OPTARG'\n" >&2
 555             usage && exit 1
 556             ;;
 557         y)
 558             ASSUME_YES="y"
 559             ;;
 560         *)
 561             usage && exit 1
 562             ;;
 563     esac
 564 done
 565
 566 if [ -n "$SHOWOPTS" ]; then
 567     dump_vars
 568     exit 0
 569 fi
 570
 571 [ -n "$RELEASE_DAILY" ] && echo -e "\nInstalling from daily build repo" && RELEASE="-R ReleaseTHREE-daily" && REPOSITORY="-r testing" && COMMIT_ID="master"
 572
 573 # if develop, we force master
 574 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 575
 576 # forcing source from master removed. Now only install from source when explicit
 577 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
 578
 579 if [ -n "$TEST_INSTALLER" ]; then
 580     echo -e "\nUsing local devops repo for OSM installation"
 581     TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 582 else
 583     echo -e "\nCreating temporary dir for OSM installation"
 584     TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 585     trap 'rm -rf "$TEMPDIR"' EXIT
 586 fi
 587
 588 need_packages="git jq"
 589 for package in $need_packages; do
 590     echo -e "Checking required packages: $package"
 591     dpkg -l $package &>/dev/null \
 592         || ! echo -e "     $package not installed.\nInstalling $package requires root privileges" \
 593         || sudo apt-get install -y $package \
 594         || FATAL "failed to install $package"
 595 done
 596
 597 if [ -z "$TEST_INSTALLER" ]; then
 598     echo -e "\nCloning devops repo temporarily"
 599     git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
 600     RC_CLONE=$?
 601 fi
 602
 603 echo -e "\nGuessing the current stable release"
 604 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
 605 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
 606 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
 607 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
 608
 609 if [ -n "$RELEASE_DAILY" ]; then
 610     echo "Using master/HEAD devops"
 611     git -C $TEMPDIR checkout master
 612 elif [ -z "$TEST_INSTALLER" ]; then
 613     git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
 614 fi
 615
 616 OSM_DEVOPS=$TEMPDIR
 617 OSM_JENKINS="$TEMPDIR/jenkins"
 618 . $OSM_JENKINS/common/all_funcs
 619
 620 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
 621 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
 622 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
 623 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
 624
 625 #Installation starts here
 626 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
 627 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
 628     ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
 629 fi
 630
 631 echo -e "\nChecking required packages: wget, curl, tar"
 632 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt-get install -y wget curl tar
 633
 634 echo -e "Checking required packages: lxd"
 635 lxd --version &>/dev/null || FATAL "lxd not present, exiting."
 636 [ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd" && install_lxd
 637
 638 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README.txt &> /dev/null
 639 track start
 640
 641 # use local devops for containers
 642 export OSM_USE_LOCAL_DEVOPS=true
 643 if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
 644     echo -e "\nCreating the containers and building from source ..."
 645     $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
 646     ro_is_up && track RO
 647     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
 648     vca_is_up && track VCA
 649     $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
 650     $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
 651     #so_is_up && track SOUI
 652     track SOUI
 653 elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
 654     echo -e "\nInstalling from lxd images ..."
 655     install_from_lxdimages
 656 else #install from binaries
 657     echo -e "\nCreating the containers and installing from binaries ..."
 658     $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
 659     ro_is_up && track RO
 660     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
 661     vca_is_up && track VCA
 662     $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
 663     $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
 664     #so_is_up && track SOUI
 665     track SOUI
 666 fi
 667
 668 #Install iptables-persistent and configure NAT rules
 669 [ -z "$NOCONFIGURE" ] && nat
 670
 671 #Configure components
 672 [ -z "$NOCONFIGURE" ] && configure
 673
 674 #Install osmclient
 675 [ -z "$NOCONFIGURE" ] && install_osmclient
 676
 677 #Install vim-emu (optional)
 678 if [ -n "$INSTALL_VIMEMU" ]; then
 679     echo -e "\nInstalling vim-emu ..."
 680     install_vimemu
 681 fi
 682
 683 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README2.txt &> /dev/null
 684 track end
 685 echo -e "\nDONE"
 686