installers/install_osm.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  19     echo -e "  OPTIONS"
  20     echo -e "     --uninstall:   uninstall OSM: remove the containers and delete NAT rules"
  21     echo -e "     --source:      install OSM from source code using the latest stable tag"
  22     echo -e "     -r <repo>:      use specified repository name for osm packages"
  23     echo -e "     -R <release>:   use specified release for osm packages"
  24     echo -e "     -u <repo base>: use specified repository url for osm packages"
  25     echo -e "     -k <repo key>:  use specified repository public key url"
  26     echo -e "     -b <refspec>:  install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  27     echo -e "                    -b master          (main dev branch)"
  28     echo -e "                    -b v2.0            (v2.0 branch)"
  29     echo -e "                    -b tags/v1.1.0     (a specific tag)"
  30     echo -e "                    ..."
  31     echo -e "     --develop:     (deprecated, use '-b master') install OSM from source code using the master branch"
  32     echo -e "     --nat:         install only NAT rules"
  33 #    echo -e "     --update:      update to the latest stable release or to the latest commit if using a specific branch"
  34     echo -e "     --showopts:    print chosen options and exit (only for debugging)"
  35     echo -e "     -y:            do not prompt for confirmation, assumes yes"
  36     echo -e "     -h / --help:   print this help"
  37 }
  38
  39 #Uninstall OSM: remove containers
  40 function uninstall(){
  41     echo -e "\nUninstalling OSM"
  42     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  43         $OSM_DEVOPS/jenkins/host/clean_container RO
  44         $OSM_DEVOPS/jenkins/host/clean_container VCA
  45         $OSM_DEVOPS/jenkins/host/clean_container SO
  46         #$OSM_DEVOPS/jenkins/host/clean_container UI
  47     else
  48         lxc stop RO && lxc delete RO
  49         lxc stop VCA && lxc delete VCA
  50         lxc stop SO-ub && lxc delete SO-ub
  51     fi
  52 }
  53
  54 #Configure NAT rules, based on the current IP addresses of containers
  55 function nat(){
  56     echo -e "\nChecking required packages: iptables-persistent"
  57     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
  58     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
  59     echo -e "\nConfiguring NAT rules"
  60     echo -e "   Required root privileges"
  61     sudo $OSM_DEVOPS/installers/nat_osm
  62 }
  63
  64 #Update RO, SO and UI:
  65 function update(){
  66     echo -e "\nUpdating components"
  67
  68     echo -e "     Updating RO"
  69     CONTAINER="RO"
  70     MDG="RO"
  71     INSTALL_FOLDER="/opt/openmano"
  72     echo -e "     Fetching the repo"
  73     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
  74     BRANCH=""
  75     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
  76     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
  77     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
  78     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
  79     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
  80     # COMMIT_ID either was  previously set with -b option, or is an empty string
  81     CHECKOUT_ID=$COMMIT_ID
  82     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
  83     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
  84     if [[ $CHECKOUT_ID == "tags/"* ]]; then
  85         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
  86     else
  87         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
  88     fi
  89     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
  90     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
  91         echo "         Nothing to be done."
  92     else
  93         echo "         Update required."
  94         lxc exec $CONTAINER -- service osm-ro stop
  95         lxc exec $CONTAINER -- git -C /opt/openmano stash
  96         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
  97         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
  98         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
  99         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
 100         lxc exec $CONTAINER -- service osm-ro start
 101     fi
 102     echo
 103
 104     echo -e "     Updating SO and UI"
 105     CONTAINER="SO-ub"
 106     MDG="SO"
 107     INSTALL_FOLDER=""   # To be filled in
 108     echo -e "     Fetching the repo"
 109     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 110     BRANCH=""
 111     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 112     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 113     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 114     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 115     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 116     # COMMIT_ID either was  previously set with -b option, or is an empty string
 117     CHECKOUT_ID=$COMMIT_ID
 118     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 119     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 120     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 121         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 122     else
 123         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 124     fi
 125     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 126     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 127         echo "         Nothing to be done."
 128     else
 129         echo "         Update required."
 130         # Instructions to be added
 131         # lxc exec SO-ub -- ...
 132     fi
 133     echo
 134 }
 135
 136 function so_is_up(){
 137     SO_IP=$1
 138     time=0
 139     step=5
 140     timelength=300
 141     while [ $time -le $timelength ]
 142     do
 143         curl -k https://$SO_IP:8008/api/operational/vcs/info \
 144               --header 'accept: application/vnd.yang.data+json' \
 145               --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 146               --header 'cache-control: no-cache' \
 147               --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 148         RET=$?
 149         if [ "$RET" == 0 ]; then
 150             break
 151         fi
 152         sleep $step
 153         echo -n "."
 154         time=$((time+step))
 155     done
 156     if [ "$RET" != 0 ]; then
 157         FATAL "OSM Failed to startup"
 158     fi
 159     echo
 160 }
 161
 162 #Configure VCA, SO and RO with the initial configuration:
 163 #  RO -> tenant:osm, logs to be sent to SO
 164 #  VCA -> juju-password
 165 #  SO -> route to Juju Controller, add RO account, add VCA account
 166 function configure(){
 167     #Configure components
 168     echo -e "\nConfiguring components"
 169     . $OSM_DEVOPS/installers/export_ips
 170
 171     echo -e "       Configuring RO"
 172     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
 173     lxc exec RO -- service osm-ro restart
 174
 175     time=0; step=2; timelength=20; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
 176
 177     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 178     RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
 179     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 180     lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
 181     #lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
 182
 183     echo -e "       Configuring VCA"
 184     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 185     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 186     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 187
 188     echo -e "       Configuring SO"
 189     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 190     sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
 191     echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
 192
 193     lxc exec SO-ub -- systemctl restart launchpad
 194
 195     so_is_up $SO_CONTAINER_IP
 196
 197     #delete existing config agent (could be there on reconfigure)
 198     curl -k --request DELETE \
 199       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
 200       --header 'accept: application/vnd.yang.data+json' \
 201       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 202       --header 'cache-control: no-cache' \
 203       --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 204
 205     result=$(curl -k --request POST \
 206       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 207       --header 'accept: application/vnd.yang.data+json' \
 208       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 209       --header 'cache-control: no-cache' \
 210       --header 'content-type: application/vnd.yang.data+json' \
 211       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
 212     [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
 213
 214     #R1/R2 config line
 215     #result=$(curl -k --request PUT \
 216     #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 217     #  --header 'accept: application/vnd.yang.data+json' \
 218     #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 219     #  --header 'cache-control: no-cache' \
 220     #  --header 'content-type: application/vnd.yang.data+json' \
 221     #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
 222
 223     result=$(curl -k --request PUT \
 224       --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
 225       --header 'accept: application/vnd.yang.data+json' \
 226       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 227       --header 'cache-control: no-cache'   \
 228       --header 'content-type: application/vnd.yang.data+json' \
 229       --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
 230     [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
 231
 232     result=$(curl -k --request PATCH \
 233       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
 234       --header 'accept: application/vnd.yang.data+json' \
 235       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 236       --header 'cache-control: no-cache'   \
 237       --header 'content-type: application/vnd.yang.data+json' \
 238       --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
 239     [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
 240
 241     result=$(curl -k --request PATCH \
 242       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
 243       --header 'accept: application/vnd.yang.data+json' \
 244       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 245       --header 'cache-control: no-cache'   \
 246       --header 'content-type: application/vnd.yang.data+json' \
 247       --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
 248     [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
 249
 250     lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
 251 auto lo:1
 252 iface lo:1 inet static
 253         address  $DEFAULT_IP
 254         netmask 255.255.255.255
 255 EOF
 256     lxc exec SO-ub ifup lo:1
 257
 258 }
 259
 260 function install_lxd() {
 261     lxd init --auto
 262     lxd waitready
 263     systemctl stop lxd-bridge
 264     systemctl --system daemon-reload
 265     systemctl enable lxd-bridge
 266     systemctl start lxd-bridge
 267 }
 268
 269 function ask_user(){
 270     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 271     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 272     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 273     read -e -p "$1" USER_CONFIRMATION
 274     while true ; do
 275         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 276         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 277         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 278         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 279         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 280     done
 281 }
 282
 283 UNINSTALL=""
 284 DEVELOP=""
 285 NAT=""
 286 UPDATE=""
 287 RECONFIGURE=""
 288 TEST_INSTALLER=""
 289 LXD=""
 290 SHOWOPTS=""
 291 COMMIT_ID=""
 292 ASSUME_YES=""
 293 INSTALL_FROM_SOURCE=""
 294
 295 while getopts ":hy-:b:r:k:u:R:" o; do
 296     case "${o}" in
 297         h)
 298             usage && exit 0
 299             ;;
 300         b)
 301             COMMIT_ID=${OPTARG}
 302             ;;
 303         r)
 304             REPOSITORY="-r ${OPTARG}"
 305             ;;
 306         R)
 307             RELEASE="-R ${OPTARG}"
 308             ;;
 309         k)
 310             REPOSITORY_KEY="-k ${OPTARG}"
 311             ;;
 312         u)
 313             REPOSITORY_BASE="-u ${OPTARG}"
 314             ;;
 315         -)
 316             [ "${OPTARG}" == "help" ] && usage && exit 0
 317             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
 318             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 319             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 320             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 321             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 322             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 323             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 324             [ "${OPTARG}" == "lxd" ] && LXD="y" && continue
 325             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 326             echo -e "Invalid option: '--$OPTARG'\n" >&2
 327             usage && exit 1
 328             ;;
 329         \?)
 330             echo -e "Invalid option: '-$OPTARG'\n" >&2
 331             usage && exit 1
 332             ;;
 333         y)
 334             ASSUME_YES="y"
 335             ;;
 336         *)
 337             usage && exit 1
 338             ;;
 339     esac
 340 done
 341
 342 if [ -n "$SHOWOPTS" ]; then
 343     echo "DEVELOP=$DEVELOP"
 344     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 345     echo "UNINSTALL=$UNINSTALL"
 346     echo "NAT=$NAT"
 347     echo "UPDATE=$UPDATE"
 348     echo "RECONFIGURE=$RECONFIGURE"
 349     echo "TEST_INSTALLER=$TEST_INSTALLER"
 350     echo "LXD=$LXD"
 351     echo "SHOWOPTS=$SHOWOPTS"
 352     echo "Install from specific refspec (-b): $COMMIT_ID"
 353     exit 0
 354 fi
 355
 356 # if develop, we force master
 357 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 358
 359 # forcing source from master removed. Now only install from source when explicit
 360 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
 361
 362 if [ -n "$TEST_INSTALLER" ]; then
 363     echo -e "\nUsing local devops repo for OSM installation"
 364     TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 365 else
 366     echo -e "\nCreating temporary dir for OSM installation"
 367     TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 368     trap 'rm -rf "$TEMPDIR"' EXIT
 369 fi
 370
 371 echo -e "Checking required packages: git"
 372 dpkg -l git &>/dev/null || ! echo -e "     git not installed.\nInstalling git requires root privileges" || sudo apt-get install -y git
 373 if [ -z "$TEST_INSTALLER" ]; then
 374     echo -e "\nCloning devops repo temporarily"
 375     git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
 376     RC_CLONE=$?
 377 fi
 378
 379 echo -e "\nGuessing the current stable release"
 380 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | tail -n1`
 381 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
 382 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
 383 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
 384 [ -z "$TEST_INSTALLER" ] && git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
 385
 386 OSM_DEVOPS=$TEMPDIR
 387 OSM_JENKINS="$TEMPDIR/jenkins"
 388 . $OSM_JENKINS/common/all_funcs
 389
 390 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
 391 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
 392 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
 393 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
 394
 395 #Installation starts here
 396 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
 397 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
 398     ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
 399 fi
 400
 401 echo -e "\nChecking required packages: wget, curl, tar"
 402 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt-get install -y wget curl tar
 403
 404 echo -e "Checking required packages: lxd"
 405 lxd --version &>/dev/null || FATAL "lxd not present, exiting."
 406 [ -n "$LXD" ] && echo -e "\nConfiguring lxd" && install_lxd
 407
 408 wget -q -O- https://osm-download.etsi.org/ftp/osm-2.0-two/README.txt &> /dev/null
 409
 410 # use local devops for containers
 411 export OSM_USE_LOCAL_DEVOPS=true
 412 if [ -z "$INSTALL_FROM_SOURCE" ]; then
 413     echo -e "\nCreating the containers and installing from binaries ..."
 414     $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
 415     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
 416     $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
 417     $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
 418 else #install from source
 419     echo -e "\nCreating the containers and building from source ..."
 420     $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
 421     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
 422     $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
 423     $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
 424 fi
 425
 426 #Install iptables-persistent and configure NAT rules
 427 nat
 428
 429 #Configure components
 430 configure
 431
 432 wget -q -O- https://osm-download.etsi.org/ftp/osm-2.0-two/README2.txt &> /dev/null
 433 echo -e "\nDONE"