installers/full_install_osm.sh

   1 #!/bin/bash
   2 #
   3 #   Licensed under the Apache License, Version 2.0 (the "License");
   4 #   you may not use this file except in compliance with the License.
   5 #   You may obtain a copy of the License at
   6 #
   7 #       http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #   Unless required by applicable law or agreed to in writing, software
  10 #   distributed under the License is distributed on an "AS IS" BASIS,
  11 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #   See the License for the specific language governing permissions and
  13 #   limitations under the License.
  14 #
  15
  16 function usage(){
  17     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  18     echo -e "usage: $0 [OPTIONS]"
  19     echo -e "Install OSM"
  20     echo -e "  OPTIONS"
  21     echo -e "     -h / --help:    print this help"
  22     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  23     echo -e "     -r <repo>:      use specified repository name for osm packages"
  24     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  25     echo -e "     -u <repo base>: use specified repository url for osm packages"
  26     echo -e "     -k <repo key>:  use specified repository public key url"
  27     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  28     echo -e "                     -b master          (main dev branch)"
  29     echo -e "                     -b v2.0            (v2.0 branch)"
  30     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  31     echo -e "                     ..."
  32     echo -e "     -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
  33     echo -e "     -s <namespace>  namespace when installed using k8s, default is osm"
  34     echo -e "     -H <VCA host>   use specific juju host controller IP"
  35     echo -e "     -S <VCA secret> use VCA/juju secret key"
  36     echo -e "     -P <VCA pubkey> use VCA/juju public key file"
  37     echo -e "     -A <VCA apiproxy> use VCA/juju API proxy"
  38     echo -e "     --pla:          install the PLA module for placement support"
  39     echo -e "     --old-sa:       install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
  40     echo -e "     --ng-sa:        install new Service Assurance framework (Airflow, AlertManager and Pushgateway)  (enabled by default)"
  41     echo -e "     -m <MODULE>:    install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
  42     echo -e "     -o <ADDON>:     ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
  43     echo -e "     -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
  44     echo -e "     -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
  45     echo -e "     -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
  46     echo -e "     -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
  47     echo -e "     -D <devops path> use local devops installation path"
  48     echo -e "     -w <work dir>   Location to store runtime installation"
  49     echo -e "     -t <docker tag> specify osm docker tag (default is latest)"
  50     echo -e "     -l:             LXD cloud yaml file"
  51     echo -e "     -L:             LXD credentials yaml file"
  52     echo -e "     -K:             Specifies the name of the controller to use - The controller must be already bootstrapped"
  53     echo -e "     -d <docker registry URL> use docker registry URL instead of dockerhub"
  54     echo -e "     -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
  55     echo -e "     -T <docker tag> specify docker tag for the modules specified with option -m"
  56     echo -e "     --debug:        debug mode"
  57     echo -e "     --nocachelxdimages:  do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
  58     echo -e "     --cachelxdimages:  cache local lxd images, create cronjob for that cache (will make installation longer)"
  59     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  60     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  61     echo -e "     --nojuju:       do not juju, assumes already installed"
  62     echo -e "     --nodockerbuild:do not build docker images (use existing locally cached images)"
  63     echo -e "     --nohostports:  do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
  64     echo -e "     --nohostclient: do not install the osmclient"
  65     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  66     echo -e "     --source:       install OSM from source code using the latest stable tag"
  67     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  68     echo -e "     --pullimages:   pull/run osm images from docker.io/opensourcemano"
  69     echo -e "     --k8s_monitor:  install the OSM kubernetes monitoring with prometheus and grafana"
  70     echo -e "     --volume:       create a VM volume when installing to OpenStack"
  71     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  72     echo -e "     --charmed:                   Deploy and operate OSM with Charms on k8s"
  73     echo -e "     [--bundle <bundle path>]:    Specify with which bundle to deploy OSM with charms (--charmed option)"
  74     echo -e "     [--k8s <kubeconfig path>]:   Specify with which kubernetes to deploy OSM with charms (--charmed option)"
  75     echo -e "     [--vca <name>]:              Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
  76     echo -e "     [--small-profile]:           Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
  77     echo -e "     [--lxd <yaml path>]:         Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
  78     echo -e "     [--lxd-cred <yaml path>]:    Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
  79     echo -e "     [--microstack]:              Installs microstack as a vim. (--charmed option)"
  80     echo -e "     [--overlay]:                 Add an overlay to override some defaults of the default bundle (--charmed option)"
  81     echo -e "     [--ha]:                      Installs High Availability bundle. (--charmed option)"
  82     echo -e "     [--tag]:                     Docker image tag. (--charmed option)"
  83     echo -e "     [--registry]:                Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
  84     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
  85 }
  86
  87 # takes a juju/accounts.yaml file and returns the password specific
  88 # for a controller. I wrote this using only bash tools to minimize
  89 # additions of other packages
  90 function parse_juju_password {
  91     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  92     password_file="${HOME}/.local/share/juju/accounts.yaml"
  93     local controller_name=$1
  94     local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034')
  95     sed -ne "s|^\($s\):|\1|" \
  96          -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
  97          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
  98     awk -F$fs -v controller=$controller_name '{
  99         indent = length($1)/2;
 100         vname[indent] = $2;
 101         for (i in vname) {if (i > indent) {delete vname[i]}}
 102         if (length($3) > 0) {
 103             vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
 104             if (match(vn,controller) && match($2,"password")) {
 105                 printf("%s",$3);
 106             }
 107         }
 108     }'
 109     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 110 }
 111
 112 function set_vca_variables() {
 113     OSM_VCA_CLOUDNAME="lxd-cloud"
 114     [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
 115     if [ -z "$OSM_VCA_HOST" ]; then
 116         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 117         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 118         [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 119     fi
 120     if [ -z "$OSM_VCA_SECRET" ]; then
 121         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
 122         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
 123         [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 124     fi
 125     if [ -z "$OSM_VCA_PUBKEY" ]; then
 126         OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub)
 127         [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
 128     fi
 129     if [ -z "$OSM_VCA_CACERT" ]; then
 130         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 131         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 132         [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
 133     fi
 134 }
 135
 136 function generate_secret() {
 137     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 138     head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32
 139     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 140 }
 141
 142 function check_packages() {
 143     NEEDED_PACKAGES="$1"
 144     echo -e "Checking required packages: ${NEEDED_PACKAGES}"
 145     for PACKAGE in ${NEEDED_PACKAGES} ; do
 146         dpkg -L ${PACKAGE}
 147         if [ $? -ne 0 ]; then
 148             echo -e "Package ${PACKAGE} is not installed."
 149             echo -e "Updating apt-cache ..."
 150             sudo apt-get update
 151             echo -e "Installing ${PACKAGE} ..."
 152             sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
 153         fi
 154     done
 155     echo -e "Required packages are present: ${NEEDED_PACKAGES}"
 156 }
 157
 158 function ask_user(){
 159     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 160     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 161     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 162     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 163     read -e -p "$1" USER_CONFIRMATION
 164     while true ; do
 165         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 166         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 167         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 168         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 169         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 170     done
 171     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 172 }
 173
 174 function install_osmclient(){
 175     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 176     CLIENT_RELEASE=${RELEASE#"-R "}
 177     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 178     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 179     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 180     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 181     curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
 182     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
 183     sudo apt-get -y update
 184     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip
 185     sudo -H LC_ALL=C python3 -m pip install -U pip
 186     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient
 187     if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
 188         python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
 189     fi
 190     if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
 191         sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libmagic1
 192         python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
 193     fi
 194     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 195     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 196     echo -e "\nOSM client installed"
 197     if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
 198         echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 199         echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 200         echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 201     else
 202         echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
 203         echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
 204         echo "     export OSM_HOSTNAME=<OSM_host>"
 205     fi
 206     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 207     return 0
 208 }
 209
 210 function docker_login() {
 211     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 212     echo "Docker login"
 213     [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}"
 214     sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
 215     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 216 }
 217
 218 function generate_docker_images() {
 219     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 220     echo "Generating docker images"
 221     _build_from=$COMMIT_ID
 222     [ -z "$_build_from" ] && _build_from="latest"
 223     echo "OSM Docker images generated from $_build_from"
 224     LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
 225     trap 'rm -rf "${LWTEMPDIR}"' EXIT
 226     for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do
 227         if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then
 228             module_lower=${module,,}
 229             if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
 230                 continue
 231             fi
 232             git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module
 233             git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
 234             sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
 235         fi
 236     done
 237     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then
 238         BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY")
 239         BUILD_ARGS+=(--build-arg RELEASE="$RELEASE")
 240         BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY")
 241         BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE")
 242         sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
 243     fi
 244     echo "Finished generation of docker images"
 245     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 246 }
 247
 248 function cmp_overwrite() {
 249     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 250     file1="$1"
 251     file2="$2"
 252     if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then
 253         if [ -f "${file2}" ]; then
 254             ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
 255         else
 256             cp -b ${file1} ${file2}
 257         fi
 258     fi
 259     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 260 }
 261
 262 #deploys osm pods and services
 263 function deploy_osm_services() {
 264     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 265     # helm is already installed as part of install_kubeadm_cluster.sh
 266
 267     # Generate helm values to be passed with -f osm-values.yaml
 268     sudo mkdir -p ${OSM_HELM_WORK_DIR}
 269     sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
 270 vca:
 271   pubkey: \"${OSM_VCA_PUBKEY}\"
 272 EOF"
 273
 274     # Generate helm values to be passed with --set
 275     OSM_HELM_OPTS=""
 276     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
 277     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
 278     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}"
 279     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
 280     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
 281     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
 282     [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
 283     [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag=${OSM_DOCKER_TAG}"
 284     [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
 285     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 286         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true"
 287         [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=${HTTP_PROXY}"
 288         [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=${HTTPS_PROXY}"
 289         [ -n "${NO_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=${NO_PROXY}"
 290     fi
 291
 292     echo "helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
 293     helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}
 294
 295     # Override existing values.yaml with the final values.yaml used to install OSM
 296     helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
 297     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 298 }
 299
 300 #deploy charmed services
 301 function deploy_charmed_services() {
 302     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 303     juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
 304     juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE
 305     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 306 }
 307
 308 #deploy mongodb
 309 function deploy_mongodb() {
 310     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 311     MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 312     [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
 313     $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
 314     FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed"
 315     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 316 }
 317
 318 function install_osm_ngsa_service() {
 319     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 320     NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 321     [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
 322     $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
 323     FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
 324     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 325 }
 326
 327 function add_local_k8scluster() {
 328     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 329     /usr/bin/osm --all-projects vim-create \
 330       --name _system-osm-vim \
 331       --account_type dummy \
 332       --auth_url http://dummy \
 333       --user osm --password osm --tenant osm \
 334       --description "dummy" \
 335       --config '{management_network_name: mgmt}'
 336     /usr/bin/osm --all-projects k8scluster-add \
 337       --creds ${HOME}/.kube/config \
 338       --vim _system-osm-vim \
 339       --k8s-nets '{"net1": null}' \
 340       --version '1.15' \
 341       --description "OSM Internal Cluster" \
 342       _system-osm-k8s
 343     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 344 }
 345
 346 function configure_apt_proxy() {
 347     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 348     OSM_APT_PROXY=$1
 349     OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt"
 350     echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}"
 351     if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
 352         sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
 353 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
 354 EOF"
 355     else
 356         sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE}
 357     fi
 358     sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}"
 359     track prereq apt_proxy_configured_ok
 360     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 361 }
 362
 363 function ask_proceed() {
 364     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 365
 366     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
 367     1. Install and configure LXD
 368     2. Install juju
 369     3. Install docker CE
 370     4. Disable swap space
 371     5. Install and initialize Kubernetes
 372     as pre-requirements.
 373     Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 374
 375     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 376 }
 377
 378 function check_osm_behind_proxy() {
 379     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 380
 381     export OSM_BEHIND_PROXY=""
 382     export OSM_PROXY_ENV_VARIABLES=""
 383     [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
 384     [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
 385     [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
 386     [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
 387     [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
 388     [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
 389
 390     echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
 391     echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
 392
 393     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 394         [ -z "$ASSUME_YES" ] && ! ask_user "
 395 The following env variables have been found for the current user:
 396 ${OSM_PROXY_ENV_VARIABLES}.
 397
 398 This suggests that this machine is behind a proxy and a special configuration is required.
 399 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
 400 env variables.
 401
 402 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
 403 Depending on the program, the env variables to work behind a proxy might be different
 404 (e.g. http_proxy vs HTTP_PROXY).
 405
 406 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
 407 and HTTPS_PROXY are defined.
 408
 409 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
 410 those env variables are also set for root user. If you are not sure whether those variables
 411 are configured for the root user, you can stop the installation now.
 412
 413 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
 414     else
 415         echo "This machine is not behind a proxy"
 416     fi
 417
 418     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 419 }
 420
 421 function find_devops_folder() {
 422     if [ -z "$OSM_DEVOPS" ]; then
 423         if [ -n "$TEST_INSTALLER" ]; then
 424             echo -e "\nUsing local devops repo for OSM installation"
 425             OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
 426         else
 427             echo -e "\nCreating temporary dir for OSM installation"
 428             OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 429             trap 'rm -rf "$OSM_DEVOPS"' EXIT
 430             git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
 431         fi
 432     fi
 433 }
 434
 435 function install_osm() {
 436     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 437
 438     trap ctrl_c INT
 439
 440
 441     check_osm_behind_proxy
 442     check_packages "git wget curl tar snapd"
 443     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 444     find_devops_folder
 445
 446     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
 447
 448     track checks checkingroot_ok
 449     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 450     track checks noroot_ok
 451     ask_proceed
 452     track checks proceed_ok
 453
 454     echo "Installing OSM"
 455
 456     [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
 457
 458     echo "Determining IP address of the interface with the default route"
 459     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
 460     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
 461     [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 462     OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
 463     [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 464
 465     # configure apt proxy
 466     [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
 467
 468     # if no host is passed in, we need to install lxd, unless explicilty asked not to
 469     if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then
 470         LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
 471         [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
 472         $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
 473     fi
 474
 475     track prereq prereqok_ok
 476
 477     if [ ! -n "$INSTALL_NODOCKER" ]; then
 478         DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 479         [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
 480         [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
 481         $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
 482     fi
 483
 484     track docker_ce docker_ce_ok
 485
 486     echo "Creating folders for installation"
 487     [ ! -d "$OSM_WORK_DIR" ] && sudo mkdir -p $OSM_WORK_DIR
 488     sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_WORK_DIR/kubeadm-config.yaml
 489
 490     $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
 491     FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
 492     track k8scluster k8scluster_ok
 493
 494     JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
 495     [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
 496     [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
 497     [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
 498     [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
 499     [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
 500     $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
 501     set_vca_variables
 502     track juju juju_ok
 503
 504     # Deploy OSM services
 505     [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
 506     track docker_images docker_images_ok
 507
 508     deploy_mongodb
 509     track deploy_osm deploy_mongodb_ok
 510     deploy_osm_services
 511     track deploy_osm deploy_osm_services_k8s_ok
 512     if [ -n "$INSTALL_K8S_MONITOR" ]; then
 513         # install OSM MONITORING
 514         install_k8s_monitoring
 515         track deploy_osm install_k8s_monitoring_ok
 516     fi
 517     if [ -n "$INSTALL_NGSA" ]; then
 518         # optional NGSA install
 519         install_osm_ngsa_service
 520         track deploy_osm install_osm_ngsa_ok
 521     fi
 522
 523     [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
 524     track osmclient osmclient_ok
 525
 526     echo -e "Checking OSM health state..."
 527     $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
 528     (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
 529     echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
 530     track healthchecks osm_unhealthy didnotconverge)
 531     track healthchecks after_healthcheck_ok
 532
 533     add_local_k8scluster
 534     track final_ops add_local_k8scluster_ok
 535
 536     arrange_docker_default_network_policy
 537
 538     wget -q -O- https://osm-download.etsi.org/ftp/osm-14.0-fourteen/README2.txt &> /dev/null
 539     track end
 540     sudo find /etc/osm
 541     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 542     return 0
 543 }
 544
 545 function install_to_openstack() {
 546     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 547
 548     if [ -z "$2" ]; then
 549         FATAL "OpenStack installer requires a valid external network name"
 550     fi
 551
 552     # Install Pip for Python3
 553     sudo apt install -y python3-pip python3-venv
 554     sudo -H LC_ALL=C python3 -m pip install -U pip
 555
 556     # Create a venv to avoid conflicts with the host installation
 557     python3 -m venv $OPENSTACK_PYTHON_VENV
 558
 559     source $OPENSTACK_PYTHON_VENV/bin/activate
 560
 561     # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
 562     python -m pip install -U wheel
 563     python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
 564
 565     # Install the Openstack cloud module (ansible>=2.10)
 566     ansible-galaxy collection install openstack.cloud
 567
 568     export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
 569
 570     OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
 571
 572     ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
 573
 574     if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
 575         ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
 576     fi
 577
 578     if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
 579         ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
 580     fi
 581
 582     # Execute the Ansible playbook based on openrc or clouds.yaml
 583     if [ -e "$1" ]; then
 584         . $1
 585         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 586         $OSM_DEVOPS/installers/openstack/site.yml
 587     else
 588         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 589         -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
 590     fi
 591
 592     # Exit from venv
 593     deactivate
 594
 595     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 596     return 0
 597 }
 598
 599 function arrange_docker_default_network_policy() {
 600     echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
 601     sudo iptables -I DOCKER-USER -j ACCEPT
 602     sudo iptables-save | sudo tee /etc/iptables/rules.v4
 603     sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
 604 }
 605
 606 function install_k8s_monitoring() {
 607     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 608     # install OSM monitoring
 609     sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
 610     sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
 611     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 612 }
 613
 614 function dump_vars(){
 615     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 616     echo "APT_PROXY_URL=$APT_PROXY_URL"
 617     echo "DEVELOP=$DEVELOP"
 618     echo "DEBUG_INSTALL=$DEBUG_INSTALL"
 619     echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
 620     echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
 621     echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
 622     echo "DOCKER_USER=$DOCKER_USER"
 623     echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
 624     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 625     echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
 626     echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
 627     echo "INSTALL_LXD=$INSTALL_LXD"
 628     echo "INSTALL_NGSA=$INSTALL_NGSA"
 629     echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
 630     echo "INSTALL_NOJUJU=$INSTALL_NOJUJU"
 631     echo "INSTALL_NOLXD=$INSTALL_NOLXD"
 632     echo "INSTALL_ONLY=$INSTALL_ONLY"
 633     echo "INSTALL_PLA=$INSTALL_PLA"
 634     echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
 635     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 636     echo "NO_HOST_PORTS=$NO_HOST_PORTS"
 637     echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
 638     echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
 639     echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
 640     echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
 641     echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
 642     echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
 643     echo "OSM_DEVOPS=$OSM_DEVOPS"
 644     echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
 645     echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
 646     echo "OSM_NAMESPACE=$OSM_NAMESPACE"
 647     echo "OSM_VCA_HOST=$OSM_VCA_HOST"
 648     echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
 649     echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
 650     echo "OSM_WORK_DIR=$OSM_WORK_DIR"
 651     echo "PULL_IMAGES=$PULL_IMAGES"
 652     echo "RECONFIGURE=$RECONFIGURE"
 653     echo "RELEASE=$RELEASE"
 654     echo "REPOSITORY=$REPOSITORY"
 655     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 656     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 657     echo "SHOWOPTS=$SHOWOPTS"
 658     echo "TEST_INSTALLER=$TEST_INSTALLER"
 659     echo "TO_REBUILD=$TO_REBUILD"
 660     echo "UNINSTALL=$UNINSTALL"
 661     echo "UPDATE=$UPDATE"
 662     echo "Install from specific refspec (-b): $COMMIT_ID"
 663     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 664 }
 665
 666 function parse_docker_registry_url() {
 667     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 668     DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}')
 669     DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}')
 670     DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}')
 671     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 672 }
 673
 674 function ctrl_c() {
 675     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 676     echo "** Trapped CTRL-C"
 677     FATAL "User stopped the installation"
 678     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 679 }
 680
 681 UNINSTALL=""
 682 DEVELOP=""
 683 UPDATE=""
 684 RECONFIGURE=""
 685 TEST_INSTALLER=""
 686 INSTALL_LXD=""
 687 SHOWOPTS=""
 688 COMMIT_ID=""
 689 ASSUME_YES=""
 690 APT_PROXY_URL=""
 691 INSTALL_FROM_SOURCE=""
 692 DEBUG_INSTALL=""
 693 RELEASE="ReleaseTEN"
 694 REPOSITORY="stable"
 695 INSTALL_K8S_MONITOR=""
 696 INSTALL_NGSA="y"
 697 INSTALL_PLA=""
 698 INSTALL_VIMEMU=""
 699 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 700 LXD_REPOSITORY_PATH=""
 701 INSTALL_LIGHTWEIGHT="y"
 702 INSTALL_TO_OPENSTACK=""
 703 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
 704 OPENSTACK_PUBLIC_NET_NAME=""
 705 OPENSTACK_ATTACH_VOLUME="false"
 706 OPENSTACK_SSH_KEY_FILE=""
 707 OPENSTACK_USERDATA_FILE=""
 708 OPENSTACK_VM_NAME="server-osm"
 709 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
 710 INSTALL_ONLY=""
 711 TO_REBUILD=""
 712 INSTALL_NOLXD=""
 713 INSTALL_NODOCKER=""
 714 INSTALL_NOJUJU=""
 715 INSTALL_NOHOSTCLIENT=""
 716 INSTALL_CACHELXDIMAGES=""
 717 OSM_DEVOPS=
 718 OSM_VCA_HOST=
 719 OSM_VCA_SECRET=
 720 OSM_VCA_PUBKEY=
 721 OSM_VCA_CLOUDNAME="localhost"
 722 OSM_VCA_K8S_CLOUDNAME="k8scloud"
 723 OSM_NAMESPACE=osm
 724 NO_HOST_PORTS=""
 725 DOCKER_NOBUILD=""
 726 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 727 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
 728 OSM_WORK_DIR="/etc/osm"
 729 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
 730 OSM_HOST_VOL="/var/lib/osm"
 731 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
 732 OSM_DOCKER_TAG="testing-daily"
 733 DOCKER_USER=opensourcemano
 734 PULL_IMAGES="y"
 735 KAFKA_TAG=2.11-1.0.2
 736 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
 737 PROMETHEUS_TAG=v2.28.1
 738 GRAFANA_TAG=8.1.1
 739 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
 740 PROMETHEUS_CADVISOR_TAG=latest
 741 KEYSTONEDB_TAG=10
 742 OSM_DATABASE_COMMONKEY=
 743 ELASTIC_VERSION=6.4.2
 744 ELASTIC_CURATOR_VERSION=5.5.4
 745 POD_NETWORK_CIDR=10.244.0.0/16
 746 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
 747 RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$'
 748 DOCKER_REGISTRY_URL=
 749 DOCKER_PROXY_URL=
 750 MODULE_DOCKER_TAG=
 751 OSM_INSTALLATION_TYPE="Default"
 752
 753 while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
 754     case "${o}" in
 755         a)
 756             APT_PROXY_URL=${OPTARG}
 757             ;;
 758         b)
 759             COMMIT_ID=${OPTARG}
 760             PULL_IMAGES=""
 761             ;;
 762         r)
 763             REPOSITORY="${OPTARG}"
 764             REPO_ARGS+=(-r "$REPOSITORY")
 765             ;;
 766         k)
 767             REPOSITORY_KEY="${OPTARG}"
 768             REPO_ARGS+=(-k "$REPOSITORY_KEY")
 769             ;;
 770         u)
 771             REPOSITORY_BASE="${OPTARG}"
 772             REPO_ARGS+=(-u "$REPOSITORY_BASE")
 773             ;;
 774         R)
 775             RELEASE="${OPTARG}"
 776             REPO_ARGS+=(-R "$RELEASE")
 777             ;;
 778         D)
 779             OSM_DEVOPS="${OPTARG}"
 780             ;;
 781         o)
 782             INSTALL_ONLY="y"
 783             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 784             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 785             ;;
 786         O)
 787             INSTALL_TO_OPENSTACK="y"
 788             if [ -n "${OPTARG}" ]; then
 789                 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
 790             else
 791                 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
 792                 usage && exit 1
 793             fi
 794             ;;
 795         f)
 796             OPENSTACK_SSH_KEY_FILE="${OPTARG}"
 797             ;;
 798         F)
 799             OPENSTACK_USERDATA_FILE="${OPTARG}"
 800             ;;
 801         N)
 802             OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
 803             ;;
 804         m)
 805             [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
 806             [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
 807             [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
 808             [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
 809             [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
 810             [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
 811             [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
 812             [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
 813             [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
 814             [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
 815             [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
 816             [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
 817             [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
 818             [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
 819             [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
 820             ;;
 821         H)
 822             OSM_VCA_HOST="${OPTARG}"
 823             ;;
 824         S)
 825             OSM_VCA_SECRET="${OPTARG}"
 826             ;;
 827         s)
 828             OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
 829             ;;
 830         t)
 831             OSM_DOCKER_TAG="${OPTARG}"
 832             REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
 833             ;;
 834         U)
 835             DOCKER_USER="${OPTARG}"
 836             ;;
 837         P)
 838             OSM_VCA_PUBKEY=$(cat ${OPTARG})
 839             ;;
 840         A)
 841             OSM_VCA_APIPROXY="${OPTARG}"
 842             ;;
 843         l)
 844             LXD_CLOUD_FILE="${OPTARG}"
 845             ;;
 846         L)
 847             LXD_CRED_FILE="${OPTARG}"
 848             ;;
 849         K)
 850             CONTROLLER_NAME="${OPTARG}"
 851             ;;
 852         d)
 853             DOCKER_REGISTRY_URL="${OPTARG}"
 854             ;;
 855         p)
 856             DOCKER_PROXY_URL="${OPTARG}"
 857             ;;
 858         T)
 859             MODULE_DOCKER_TAG="${OPTARG}"
 860             ;;
 861         -)
 862             [ "${OPTARG}" == "help" ] && usage && exit 0
 863             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
 864             [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
 865             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 866             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 867             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 868             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 869             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 870             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 871             [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
 872             [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
 873             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 874             [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
 875             [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue
 876             [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
 877             [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
 878             [ "${OPTARG}" == "pullimages" ] && continue
 879             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 880             [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
 881             [ "${OPTARG}" == "bundle" ] && continue
 882             [ "${OPTARG}" == "k8s" ] && continue
 883             [ "${OPTARG}" == "lxd" ] && continue
 884             [ "${OPTARG}" == "lxd-cred" ] && continue
 885             [ "${OPTARG}" == "microstack" ] && continue
 886             [ "${OPTARG}" == "overlay" ] && continue
 887             [ "${OPTARG}" == "only-vca" ] && continue
 888             [ "${OPTARG}" == "small-profile" ] && continue
 889             [ "${OPTARG}" == "vca" ] && continue
 890             [ "${OPTARG}" == "ha" ] && continue
 891             [ "${OPTARG}" == "tag" ] && continue
 892             [ "${OPTARG}" == "registry" ] && continue
 893             [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
 894             [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
 895             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 896             [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
 897             [ "${OPTARG}" == "nocachelxdimages" ] && continue
 898             [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
 899             echo -e "Invalid option: '--$OPTARG'\n" >&2
 900             usage && exit 1
 901             ;;
 902         :)
 903             echo "Option -$OPTARG requires an argument" >&2
 904             usage && exit 1
 905             ;;
 906         \?)
 907             echo -e "Invalid option: '-$OPTARG'\n" >&2
 908             usage && exit 1
 909             ;;
 910         h)
 911             usage && exit 0
 912             ;;
 913         y)
 914             ASSUME_YES="y"
 915             ;;
 916         *)
 917             usage && exit 1
 918             ;;
 919     esac
 920 done
 921
 922 source $OSM_DEVOPS/common/all_funcs
 923
 924 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
 925 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
 926
 927 # Uninstall if "--uninstall"
 928 if [ -n "$UNINSTALL" ]; then
 929     if [ -n "$CHARMED" ]; then
 930         ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
 931         FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
 932     else
 933         ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
 934         FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
 935     fi
 936     echo -e "\nDONE"
 937     exit 0
 938 fi
 939
 940 # Installation starts here
 941
 942 # Get README and create OSM_TRACK_INSTALLATION_ID
 943 wget -q -O- https://osm-download.etsi.org/ftp/osm-14.0-fourteen/README.txt &> /dev/null
 944 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
 945
 946 # Get OS info to be tracked
 947 os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}')
 948 echo $os_distro
 949 os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}')
 950 echo $os_release
 951 os_info="${os_distro}_${os_release}"
 952 os_info="${os_info// /_}"
 953
 954 # Charmed installation
 955 if [ -n "$CHARMED" ]; then
 956     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 957     ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
 958     FATAL_TRACK charmed_install "charmed_install.sh failed"
 959     wget -q -O- https://osm-download.etsi.org/ftp/osm-14.0-fourteen/README2.txt &> /dev/null
 960     echo -e "\nDONE"
 961     exit 0
 962 fi
 963
 964 # Installation to Openstack
 965 if [ -n "$INSTALL_TO_OPENSTACK" ]; then
 966     install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
 967     echo -e "\nDONE"
 968     exit 0
 969 fi
 970
 971 # Community_installer
 972 # Check incompatible options
 973 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
 974 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
 975 # Special cases go first
 976 # if develop, we force master
 977 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 978 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
 979 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
 980 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
 981 # This is where installation starts
 982 install_osm
 983 echo -e "\nDONE"
 984 exit 0