installers/full_install_osm.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  19     echo -e "  OPTIONS"
  20     echo -e "     -r <repo>:      use specified repository name for osm packages"
  21     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  22     echo -e "     -u <repo base>: use specified repository url for osm packages"
  23     echo -e "     -k <repo key>:  use specified repository public key url"
  24     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  25     echo -e "                     -b master          (main dev branch)"
  26     echo -e "                     -b v2.0            (v2.0 branch)"
  27     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  28     echo -e "                     ..."
  29     echo -e "     --vimemu:       additionally deploy the VIM emulator as a docker container"
  30     echo -e "     --elk_stack:    additionally deploy an ELK docker stack for event logging"
  31     echo -e "     --pm_stack:     additionally deploy a Prometheus+Grafana stack for performance monitoring (PM)"
  32     echo -e "     -m <MODULE>:    install OSM but only rebuild the specified docker images (RO, LCM, NBI, LW-UI, MON, KAFKA, MONGO, NONE)"
  33     echo -e "     -o <ADDON>:     do not install OSM, but ONLY one of the addons (vimemu, elk_stack, pm_stack) (assumes OSM is already installed)"
  34     echo -e "     -D <devops path> use local devops installation path"
  35     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  36     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  37     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  38     echo -e "     --source:       install OSM from source code using the latest stable tag"
  39     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  40     echo -e "     --soui:         install classic build of OSM (Rel THREE v3.1, based on LXD containers, with SO and UI)"
  41     echo -e "     --lxdimages:    (only for Rel THREE with --soui) download lxd images from OSM repository instead of creating them from scratch"
  42     echo -e "     -l <lxd_repo>:  (only for Rel THREE with --soui) use specified repository url for lxd images"
  43     echo -e "     -p <path>:      (only for Rel THREE with --soui) use specified repository path for lxd images"
  44 #    echo -e "     --reconfigure:  reconfigure the modules (DO NOT change NAT rules)"
  45     echo -e "     --nat:          (only for Rel THREE with --soui) install only NAT rules"
  46     echo -e "     --noconfigure:  (only for Rel THREE with --soui) DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
  47 #    echo -e "     --update:       update to the latest stable release or to the latest commit if using a specific branch"
  48     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  49     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  50     echo -e "     -h / --help:    print this help"
  51 }
  52
  53 #Uninstall OSM: remove containers
  54 function uninstall(){
  55     echo -e "\nUninstalling OSM"
  56     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  57         $OSM_DEVOPS/jenkins/host/clean_container RO
  58         $OSM_DEVOPS/jenkins/host/clean_container VCA
  59         $OSM_DEVOPS/jenkins/host/clean_container MON
  60         $OSM_DEVOPS/jenkins/host/clean_container SO
  61         #$OSM_DEVOPS/jenkins/host/clean_container UI
  62     else
  63         lxc stop RO && lxc delete RO
  64         lxc stop VCA && lxc delete VCA
  65         lxc stop MON && lxc delete MON
  66         lxc stop SO-ub && lxc delete SO-ub
  67     fi
  68     echo -e "\nDeleting imported lxd images if they exist"
  69     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
  70     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
  71     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
  72     return 0
  73 }
  74
  75 function remove_stack() {
  76     stack=$1
  77     if sg docker -c "docker stack ps ${stack}" ; then
  78         echo -e "\nRemoving stack ${stack}" && sg docker -c "docker stack rm ${stack}"
  79         COUNTER=0
  80         result=1
  81         while [ ${COUNTER} -lt 30 ]; do
  82             result=$(sg docker -c "docker stack ps ${stack}" | wc -l)
  83             #echo "Dockers running: $result"
  84             if [ "${result}" == "0" ]; then
  85                 break
  86             fi
  87             let COUNTER=COUNTER+1
  88             sleep 1
  89         done
  90         if [ "${result}" == "0" ]; then
  91             echo "All dockers of the stack ${stack} were removed"
  92         else
  93             FATAL "Some dockers of the stack ${stack} could not be removed. Could not clean it."
  94         fi
  95         sleep 5
  96     fi
  97 }
  98
  99 #Uninstall lightweight OSM: remove dockers
 100 function uninstall_lightweight() {
 101     echo -e "\nUninstalling lightweight OSM"
 102     remove_stack osm
 103     echo "Now osm docker images and volumes will be deleted"
 104     newgrp docker << EONG
 105     docker image rm osm/ro
 106     docker image rm osm/lcm
 107     docker image rm osm/light-ui
 108     docker image rm osm/nbi
 109     docker image rm osm/mon
 110     docker image rm osm/pm
 111     docker volume rm osm_mon_db
 112     docker volume rm osm_mongo_db
 113     docker volume rm osm_osm_packages
 114     docker volume rm osm_ro_db
 115 EONG
 116     echo "Removing /etc/osm and /var/log/osm files"
 117     rm -rf /etc/osm
 118     rm -rf /var/log/osm
 119     return 0
 120 }
 121
 122 #Configure NAT rules, based on the current IP addresses of containers
 123 function nat(){
 124     echo -e "\nChecking required packages: iptables-persistent"
 125     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
 126     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
 127     echo -e "\nConfiguring NAT rules"
 128     echo -e "   Required root privileges"
 129     sudo $OSM_DEVOPS/installers/nat_osm
 130 }
 131
 132 function FATAL(){
 133     echo "FATAL error: Cannot install OSM due to \"$1\""
 134     exit 1
 135 }
 136
 137 #Update RO, SO and UI:
 138 function update(){
 139     echo -e "\nUpdating components"
 140
 141     echo -e "     Updating RO"
 142     CONTAINER="RO"
 143     MDG="RO"
 144     INSTALL_FOLDER="/opt/openmano"
 145     echo -e "     Fetching the repo"
 146     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 147     BRANCH=""
 148     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 149     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 150     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 151     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 152     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 153     # COMMIT_ID either was  previously set with -b option, or is an empty string
 154     CHECKOUT_ID=$COMMIT_ID
 155     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 156     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 157     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 158         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 159     else
 160         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 161     fi
 162     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 163     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 164         echo "         Nothing to be done."
 165     else
 166         echo "         Update required."
 167         lxc exec $CONTAINER -- service osm-ro stop
 168         lxc exec $CONTAINER -- git -C /opt/openmano stash
 169         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
 170         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
 171         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
 172         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
 173         lxc exec $CONTAINER -- service osm-ro start
 174     fi
 175     echo
 176
 177     echo -e "     Updating SO and UI"
 178     CONTAINER="SO-ub"
 179     MDG="SO"
 180     INSTALL_FOLDER=""   # To be filled in
 181     echo -e "     Fetching the repo"
 182     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 183     BRANCH=""
 184     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 185     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 186     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 187     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 188     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 189     # COMMIT_ID either was  previously set with -b option, or is an empty string
 190     CHECKOUT_ID=$COMMIT_ID
 191     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 192     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 193     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 194         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 195     else
 196         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 197     fi
 198     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 199     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 200         echo "         Nothing to be done."
 201     else
 202         echo "         Update required."
 203         # Instructions to be added
 204         # lxc exec SO-ub -- ...
 205     fi
 206     echo
 207     echo -e "Updating MON Container"
 208     CONTAINER="MON"
 209     MDG="MON"
 210     INSTALL_FOLDER="/root/MON"
 211     echo -e "     Fetching the repo"
 212     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 213     BRANCH=""
 214     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 215     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 216     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 217     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 218     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 219     # COMMIT_ID either was  previously set with -b option, or is an empty string
 220     CHECKOUT_ID=$COMMIT_ID
 221     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 222     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 223     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 224         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 225     else
 226         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 227     fi
 228     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 229     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 230         echo "         Nothing to be done."
 231     else
 232         echo "         Update required."
 233     fi
 234     echo
 235 }
 236
 237 function so_is_up() {
 238     if [ -n "$1" ]; then
 239         SO_IP=$1
 240     else
 241         SO_IP=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
 242     fi
 243     time=0
 244     step=5
 245     timelength=300
 246     while [ $time -le $timelength ]
 247     do
 248         if [[ `curl -k -X GET   https://$SO_IP:8008/api/operational/vcs/info \
 249                 -H 'accept: application/vnd.yang.data+json' \
 250                 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
 251                 -H 'cache-control: no-cache' 2> /dev/null | jq  '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
 252         then
 253             echo "RW.Restconf running....SO is up"
 254             return 0
 255         fi
 256
 257         sleep $step
 258         echo -n "."
 259         time=$((time+step))
 260     done
 261
 262     FATAL "OSM Failed to startup. SO failed to startup"
 263 }
 264
 265 function vca_is_up() {
 266     if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
 267             echo "VCA is up and running"
 268             return 0
 269     fi
 270
 271     FATAL "OSM Failed to startup. VCA failed to startup"
 272 }
 273
 274 function mon_is_up() {
 275     if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
 276             echo "MON is up and running"
 277             return 0
 278     fi
 279
 280     FATAL "OSM Failed to startup. MON failed to startup"
 281 }
 282
 283 function ro_is_up() {
 284     if [ -n "$1" ]; then
 285         RO_IP=$1
 286     else
 287         RO_IP=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
 288     fi
 289     time=0
 290     step=2
 291     timelength=20
 292     while [ $time -le $timelength ]; do
 293         if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
 294             echo "RO is up and running"
 295             return 0
 296         fi
 297         sleep $step
 298         echo -n "."
 299         time=$((time+step))
 300     done
 301
 302     FATAL "OSM Failed to startup. RO failed to startup"
 303 }
 304
 305
 306 function configure_RO(){
 307     . $OSM_DEVOPS/installers/export_ips
 308     echo -e "       Configuring RO"
 309     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
 310     lxc exec RO -- service osm-ro restart
 311
 312     ro_is_up
 313
 314     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 315     lxc exec RO -- openmano tenant-create osm > /dev/null
 316     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 317     lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
 318     lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
 319 }
 320
 321 function configure_VCA(){
 322     echo -e "       Configuring VCA"
 323     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 324     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 325 }
 326
 327 function configure_SOUI(){
 328     . $OSM_DEVOPS/installers/export_ips
 329     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 330     RO_TENANT_ID=`lxc exec RO -- openmano tenant-list osm |awk '{print $1}'`
 331
 332     echo -e " Configuring MON"
 333     #Information to be added about SO socket for logging
 334
 335     echo -e "       Configuring SO"
 336     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 337     sudo ip route add 10.44.127.0/24 via $VCA_CONTAINER_IP
 338     sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
 339     sudo sed -i "$ i ip route add 10.44.127.0/24 via $VCA_CONTAINER_IP" /etc/rc.local
 340     # make journaling persistent
 341     lxc exec SO-ub -- mkdir -p /var/log/journal
 342     lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
 343     lxc exec SO-ub -- systemctl restart systemd-journald
 344
 345     echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
 346
 347     lxc exec SO-ub -- systemctl restart launchpad
 348
 349     so_is_up $SO_CONTAINER_IP
 350
 351     #delete existing config agent (could be there on reconfigure)
 352     curl -k --request DELETE \
 353       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
 354       --header 'accept: application/vnd.yang.data+json' \
 355       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 356       --header 'cache-control: no-cache' \
 357       --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 358
 359     result=$(curl -k --request POST \
 360       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 361       --header 'accept: application/vnd.yang.data+json' \
 362       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 363       --header 'cache-control: no-cache' \
 364       --header 'content-type: application/vnd.yang.data+json' \
 365       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
 366     [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
 367
 368     #R1/R2 config line
 369     #result=$(curl -k --request PUT \
 370     #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 371     #  --header 'accept: application/vnd.yang.data+json' \
 372     #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 373     #  --header 'cache-control: no-cache' \
 374     #  --header 'content-type: application/vnd.yang.data+json' \
 375     #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
 376
 377     result=$(curl -k --request PUT \
 378       --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
 379       --header 'accept: application/vnd.yang.data+json' \
 380       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 381       --header 'cache-control: no-cache'   \
 382       --header 'content-type: application/vnd.yang.data+json' \
 383       --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
 384     [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
 385
 386     result=$(curl -k --request PATCH \
 387       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
 388       --header 'accept: application/vnd.yang.data+json' \
 389       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 390       --header 'cache-control: no-cache'   \
 391       --header 'content-type: application/vnd.yang.data+json' \
 392       --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
 393     [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
 394
 395     result=$(curl -k --request PATCH \
 396       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
 397       --header 'accept: application/vnd.yang.data+json' \
 398       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 399       --header 'cache-control: no-cache'   \
 400       --header 'content-type: application/vnd.yang.data+json' \
 401       --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
 402     [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
 403
 404     lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
 405 auto lo:1
 406 iface lo:1 inet static
 407         address  $DEFAULT_IP
 408         netmask 255.255.255.255
 409 EOF
 410     lxc exec SO-ub ifup lo:1
 411 }
 412
 413 #Configure RO, VCA, and SO with the initial configuration:
 414 #  RO -> tenant:osm, logs to be sent to SO
 415 #  VCA -> juju-password
 416 #  SO -> route to Juju Controller, add RO account, add VCA account
 417 function configure(){
 418     #Configure components
 419     echo -e "\nConfiguring components"
 420     configure_RO
 421     configure_VCA
 422     configure_SOUI
 423 }
 424
 425 function install_lxd() {
 426     sudo apt-get update
 427     sudo apt-get install -y lxd
 428     newgrp lxd
 429     lxd init --auto
 430     lxd waitready
 431     lxc network create lxdbr0 ipv4.address=auto ipv4.nat=true ipv6.address=none ipv6.nat=false
 432     DEFAULT_INTERFACE=$(route -n | awk '$1~/^0.0.0.0/ {print $8}')
 433     DEFAULT_MTU=$(ip addr show $DEFAULT_INTERFACE | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
 434     lxc profile device set default eth0 mtu $DEFAULT_MTU
 435     #sudo systemctl stop lxd-bridge
 436     #sudo systemctl --system daemon-reload
 437     #sudo systemctl enable lxd-bridge
 438     #sudo systemctl start lxd-bridge
 439 }
 440
 441 function ask_user(){
 442     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 443     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 444     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 445     read -e -p "$1" USER_CONFIRMATION
 446     while true ; do
 447         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 448         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 449         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 450         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 451         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 452     done
 453 }
 454
 455 function launch_container_from_lxd(){
 456     export OSM_MDG=$1
 457     OSM_load_config
 458     export OSM_BASE_IMAGE=$2
 459     if ! container_exists $OSM_BUILD_CONTAINER; then
 460         CONTAINER_OPTS=""
 461         [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.privileged=true"
 462         [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.nesting=true"
 463         create_container $OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
 464         wait_container_up $OSM_BUILD_CONTAINER
 465     fi
 466 }
 467
 468 function install_osmclient(){
 469     CLIENT_RELEASE=${RELEASE#"-R "}
 470     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 471     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 472     [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE="-u https://osm-download.etsi.org/repository/osm/debian"
 473     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 474     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 475     curl $key_location | sudo apt-key add -
 476     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
 477     sudo apt-get update
 478     sudo apt-get install -y python-pip
 479     sudo -H pip install pip==9.0.3
 480     sudo -H pip install python-magic
 481     sudo apt-get install -y python-osmclient
 482     #sed 's,OSM_SOL005=[^$]*,OSM_SOL005=True,' -i ${HOME}/.bashrc
 483     #echo 'export OSM_HOSTNAME=localhost' >> ${HOME}/.bashrc
 484     #echo 'export OSM_SOL005=True' >> ${HOME}/.bashrc
 485     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 486     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 487     [ -n "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=127.0.0.1
 488     echo -e "\nOSM client installed"
 489     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 490     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 491     [ -n "$INSTALL_LIGHTWEIGHT" ] && echo "     export OSM_SOL005=True"
 492     [ -z "$INSTALL_LIGHTWEIGHT" ] && echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 493     return 0
 494 }
 495
 496 function install_from_lxdimages(){
 497     LXD_RELEASE=${RELEASE#"-R "}
 498     if [ -n "$LXD_REPOSITORY_PATH" ]; then
 499         LXD_IMAGE_DIR="$LXD_REPOSITORY_PATH"
 500     else
 501         LXD_IMAGE_DIR="$(mktemp -d -q --tmpdir "osmimages.XXXXXX")"
 502         trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
 503     fi
 504     echo -e "\nDeleting previous lxd images if they exist"
 505     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
 506     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
 507     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
 508     echo -e "\nImporting osm-ro"
 509     [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-ro.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.tar.gz
 510     lxc image import $LXD_IMAGE_DIR/osm-ro.tar.gz --alias osm-ro
 511     rm -f $LXD_IMAGE_DIR/osm-ro.tar.gz
 512     echo -e "\nImporting osm-vca"
 513     [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-vca.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.tar.gz
 514     lxc image import $LXD_IMAGE_DIR/osm-vca.tar.gz --alias osm-vca
 515     rm -f $LXD_IMAGE_DIR/osm-vca.tar.gz
 516     echo -e "\nImporting osm-soui"
 517     [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-soui.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.tar.gz
 518     lxc image import $LXD_IMAGE_DIR/osm-soui.tar.gz --alias osm-soui
 519     rm -f $LXD_IMAGE_DIR/osm-soui.tar.gz
 520     launch_container_from_lxd RO osm-ro
 521     ro_is_up && track RO
 522     launch_container_from_lxd VCA osm-vca
 523     vca_is_up && track VCA
 524     launch_container_from_lxd MON osm-mon
 525     mon_is_up && track MON
 526     launch_container_from_lxd SO osm-soui
 527     #so_is_up && track SOUI
 528     track SOUI
 529 }
 530
 531 function install_docker_ce() {
 532     # installs and configures Docker CE
 533     echo "Installing Docker CE ..."
 534     sudo apt-get -qq update
 535     sudo apt-get install -y apt-transport-https ca-certificates software-properties-common
 536     curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
 537     sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
 538     sudo apt-get -qq update
 539     sudo apt-get install -y docker-ce
 540     echo "Adding user to group 'docker'"
 541     sudo groupadd -f docker
 542     sudo usermod -aG docker $USER
 543     sleep 2
 544     sudo service docker restart
 545     echo "... restarted Docker service"
 546     sg docker -c "docker version" || FATAL "Docker installation failed"
 547     echo "... Docker CE installation done"
 548     return 0
 549 }
 550
 551 function install_docker_compose() {
 552     # installs and configures docker-compose
 553     echo "Installing Docker Compose ..."
 554     sudo curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
 555     sudo chmod +x /usr/local/bin/docker-compose
 556     echo "... Docker Compose installation done"
 557 }
 558
 559 function install_juju() {
 560     echo "Installing juju"
 561     sudo snap install juju --classic
 562     [ -z "$INSTALL_NOLXD" ] && sudo dpkg-reconfigure -p medium lxd
 563     sg lxd -c "juju bootstrap --bootstrap-series=xenial localhost osm"
 564     [ $(sg lxd -c "juju status" |grep "osm" |wc -l) -eq 1 ] || FATAL "Juju installation failed"
 565     echo "Finished installation of juju"
 566 }
 567
 568 function generate_docker_images() {
 569     echo "Pulling and generating docker images"
 570     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q KAFKA ; then
 571         sg docker -c "docker pull wurstmeister/zookeeper" || FATAL "cannot get zookeeper docker image"
 572         sg docker -c "docker pull wurstmeister/kafka" || FATAL "cannot get kafka docker image"
 573     fi
 574     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q MONGO ; then
 575         sg docker -c "docker pull mongo" || FATAL "cannot get mongo docker image"
 576     fi
 577     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q MON ; then
 578         git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/MON
 579         git -C ${LWTEMPDIR}/MON checkout ${COMMIT_ID}
 580         sg docker -c "docker build ${LWTEMPDIR}/MON -f ${LWTEMPDIR}/MON/docker/Dockerfile -t osm/mon --no-cache" || FATAL "cannot build MON docker image"
 581         sg docker -c "docker build ${LWTEMPDIR}/MON/policy_module -f ${LWTEMPDIR}/MON/policy_module/Dockerfile -t osm/pm --no-cache" || FATAL "cannot build PM docker image"
 582     fi
 583     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q NBI ; then
 584         git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/NBI
 585         git -C ${LWTEMPDIR}/NBI checkout ${COMMIT_ID}
 586         sg docker -c "docker build ${LWTEMPDIR}/NBI -f ${LWTEMPDIR}/NBI/Dockerfile.local -t osm/nbi --no-cache" || FATAL "cannot build NBI docker image"
 587     fi
 588     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q RO ; then
 589         sg docker -c "docker pull mysql:5" || FATAL "cannot get mysql docker image"
 590         git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/RO
 591         git -C ${LWTEMPDIR}/RO checkout ${COMMIT_ID}
 592         sg docker -c "docker build ${LWTEMPDIR}/RO -f ${LWTEMPDIR}/RO/docker/Dockerfile-local -t osm/ro --no-cache" || FATAL "cannot build RO docker image"
 593     fi
 594     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q LCM ; then
 595         git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/LCM
 596         git -C ${LWTEMPDIR}/LCM checkout ${COMMIT_ID}
 597         sg docker -c "docker build ${LWTEMPDIR}/LCM -f ${LWTEMPDIR}/LCM/Dockerfile.local -t osm/lcm --no-cache" || FATAL "cannot build LCM docker image"
 598     fi
 599     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q LW-UI ; then
 600         git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/LW-UI
 601         git -C ${LWTEMPDIR}/LW-UI checkout ${COMMIT_ID}
 602         sg docker -c "docker build ${LWTEMPDIR}/LW-UI -t osm/light-ui -f ${LWTEMPDIR}/LW-UI/Dockerfile --no-cache" || FATAL "cannot build LW-UI docker image"
 603     fi
 604     echo "Finished generation of docker images"
 605 }
 606
 607 function cmp_overwrite() {
 608     file1="$1"
 609     file2="$2"
 610     if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then
 611         if [ -f "${file2}" ]; then
 612             ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && sudo cp -b ${file1} ${file2}
 613         else
 614             sudo cp -b ${file1} ${file2}
 615         fi
 616     fi
 617 }
 618
 619 function generate_config_log_folders() {
 620     echo "Generating config and log folders"
 621     sudo mkdir -p /etc/osm/docker
 622     sudo cp -b ${OSM_DEVOPS}/installers/docker/docker-compose.yaml /etc/osm/docker/docker-compose.yaml
 623     sudo mkdir -p /var/log/osm
 624     echo "Finished generation of config and log folders"
 625 }
 626
 627 function generate_docker_env_files() {
 628     echo "Generating docker env files"
 629     echo "OSMLCM_VCA_HOST=${OSMLCM_VCA_HOST}" |sudo tee /etc/osm/docker/lcm.env
 630     echo "OSMLCM_VCA_SECRET=${OSMLCM_VCA_SECRET}" |sudo tee -a /etc/osm/docker/lcm.env
 631     MYSQL_ROOT_PASSWORD=`date +%s | sha256sum | base64 | head -c 32`
 632     if [ ! -f /etc/osm/docker/ro-db.env ]; then
 633         echo "MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee /etc/osm/docker/ro-db.env
 634     fi
 635     if [ ! -f /etc/osm/docker/ro.env ]; then
 636         echo "RO_DB_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee /etc/osm/docker/ro.env
 637     fi
 638     echo "OS_NOTIFIER_URI=http://${DEFAULT_IP}:8662" |sudo tee ${OSM_DEVOPS}/installers/docker/mon.env
 639     cmp_overwrite ${OSM_DEVOPS}/installers/docker/mon.env /etc/osm/docker/mon.env
 640     echo "Finished generation of docker env files"
 641 }
 642
 643 function init_docker_swarm() {
 644     if [ "${DEFAULT_MTU}" != "1500" ]; then
 645       DOCKER_NETS=`sg docker -c "docker network list" | awk '{print $2}' | egrep -v "^ID$" | paste -d " " -s`
 646       DOCKER_GW_NET=`sg docker -c "docker network inspect ${DOCKER_NETS}" | grep Subnet | awk -F\" '{print $4}' | egrep "^172" | sort -u | tail -1 |  awk -F\. '{if ($2 != 255) print $1"."$2+1"."$3"."$4; else print "-1";}'`
 647       sg docker -c "docker network create --subnet ${DOCKER_GW_NET} --opt com.docker.network.bridge.name=docker_gwbridge --opt com.docker.network.bridge.enable_icc=false --opt com.docker.network.bridge.enable_ip_masquerade=true --opt com.docker.network.driver.mtu=${DEFAULT_MTU} docker_gwbridge"
 648     fi
 649     sg docker -c "docker swarm init --advertise-addr ${DEFAULT_IP}"
 650     sg docker -c "docker network create --driver=overlay --attachable --opt com.docker.network.driver.mtu=${DEFAULT_MTU} netOSM"
 651     return 0
 652 }
 653
 654 function deploy_lightweight() {
 655     echo "Deploying lightweight build"
 656     [ -n "$INSTALL_NODOCKER" ] || init_docker_swarm
 657     remove_stack osm
 658     sg docker -c "docker stack deploy -c /etc/osm/docker/docker-compose.yaml osm"
 659     #docker-compose -f /etc/osm/docker/docker-compose.yaml up -d
 660     echo "Finished deployment of lightweight build"
 661 }
 662
 663 function deploy_elk() {
 664     echo "Pulling docker images for ELK"
 665     sg docker -c "docker pull docker.elastic.co/elasticsearch/elasticsearch-oss:6.2.3" || FATAL "cannot get elasticsearch docker image"
 666     sg docker -c "docker pull docker.elastic.co/logstash/logstash-oss:6.2.3" || FATAL "cannot get logstash docker image"
 667     sg docker -c "docker pull docker.elastic.co/kibana/kibana-oss:6.2.3" || FATAL "cannot get kibana docker image"
 668     echo "Finished pulling elk docker images"
 669     sudo mkdir -p /etc/osm/docker/osm_elk
 670     sudo cp -b ${OSM_DEVOPS}/installers/docker/osm_elk/* /etc/osm/docker/osm_elk
 671     remove_stack osm_elk
 672     echo "Deploying ELK stack"
 673     sg docker -c "docker stack deploy -c /etc/osm/docker/osm_elk/docker-compose.yml osm_elk"
 674     echo "Waiting for ELK stack to be up and running"
 675     time=0
 676     step=5
 677     timelength=40
 678     elk_is_up=1
 679     while [ $time -le $timelength ]; do
 680         if [[ $(curl -f -XGET http://127.0.0.1:5601/status -I 2>/dev/null | grep "HTTP/1.1 200 OK" | wc -l ) -eq 1 ]]; then
 681             elk_is_up=0
 682             break
 683         fi
 684         sleep $step
 685         time=$((time+step))
 686     done
 687     if [ $elk_is_up -eq 0 ]; then
 688         echo "ELK is up and running. Trying to create index pattern..."
 689         #Create index pattern
 690         curl -f -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
 691           "http://127.0.0.1:5601/api/saved_objects/index-pattern/logstash-*" \
 692           -d"{\"attributes\":{\"title\":\"logstash-*\",\"timeFieldName\":\"@timestamp\"}}" 2>/dev/null
 693         #Make it the default index
 694         curl -f -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
 695           "http://127.0.0.1:5601/api/kibana/settings/defaultIndex" \
 696           -d"{\"value\":\"logstash-*\"}" 2>/dev/null
 697     else
 698         echo "Cannot connect to Kibana to create index pattern."
 699         echo "Once Kibana is running, you can use the following instructions to create index pattern:"
 700         echo 'curl -f -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
 701           "http://127.0.0.1:5601/api/saved_objects/index-pattern/logstash-*" \
 702           -d"{\"attributes\":{\"title\":\"logstash-*\",\"timeFieldName\":\"@timestamp\"}}"'
 703         echo 'curl -XPOST -H "Content-Type: application/json" -H "kbn-xsrf: anything" \
 704           "http://127.0.0.1:5601/api/kibana/settings/defaultIndex" \
 705           -d"{\"value\":\"logstash-*\"}"'
 706     fi
 707     echo "Finished deployment of ELK stack"
 708     return 0
 709 }
 710
 711 function deploy_perfmon() {
 712     echo "Pulling docker images for PM (Grafana and Prometheus)"
 713     sg docker -c "docker pull prom/prometheus" || FATAL "cannot get prometheus docker image"
 714     sg docker -c "docker pull grafana/grafana" || FATAL "cannot get grafana docker image"
 715     echo "Finished pulling PM docker images"
 716     echo "Generating osm/kafka-exporter docker image"
 717     sg docker -c "docker build ${OSM_DEVOPS}/installers/docker/osm_metrics/kafka-exporter -f ${OSM_DEVOPS}/installers/docker/osm_metrics/kafka-exporter/Dockerfile -t osm/kafka-exporter --no-cache" || FATAL "cannot build kafka-exporter docker image"
 718     echo "Finished generation of osm/kafka-exporter docker image"
 719     sudo mkdir -p /etc/osm/docker/osm_metrics
 720     sudo cp -b ${OSM_DEVOPS}/installers/docker/osm_metrics/*.yml /etc/osm/docker/osm_metrics
 721     sudo cp -b ${OSM_DEVOPS}/installers/docker/osm_metrics/*.json /etc/osm/docker/osm_metrics
 722     remove_stack osm_metrics
 723     echo "Deploying PM stack (Kafka exporter + Prometheus + Grafana)"
 724     sg docker -c "docker stack deploy -c /etc/osm/docker/osm_metrics/docker-compose.yml osm_metrics"
 725     echo "Finished deployment of PM stack"
 726     return 0
 727 }
 728
 729 function install_lightweight() {
 730     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 731     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will configure LXD, install juju, install docker CE and init a docker swarm, as pre-requirements. Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 732     track proceed
 733     echo "Installing lightweight build of OSM"
 734     LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
 735     trap 'rm -rf "${LWTEMPDIR}"' EXIT
 736     DEFAULT_IF=`route -n |awk '$1~/^0.0.0.0/ {print $8}'`
 737     [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 738     DEFAULT_IP=`ip -o -4 a |grep ${DEFAULT_IF}|awk '{split($4,a,"/"); print a[1]}'`
 739     [ -z "$DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 740     DEFAULT_MTU=$(ip addr show ${DEFAULT_IF} | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
 741     if [ -z "$INSTALL_NOLXD" ]; then
 742         need_packages_lw="lxd"
 743         echo -e "Checking required packages: $need_packages_lw"
 744         dpkg -l $need_packages_lw &>/dev/null \
 745           || ! echo -e "One or several required packages are not installed. Updating apt cache requires root privileges." \
 746           || sudo apt-get update \
 747           || FATAL "failed to run apt-get update"
 748         dpkg -l $need_packages_lw &>/dev/null \
 749           || ! echo -e "Installing $need_packages_lw requires root privileges." \
 750           || sudo apt-get install -y $need_packages_lw \
 751           || FATAL "failed to install $need_packages_lw"
 752     fi
 753     track prereqok
 754     install_juju
 755     OSMLCM_VCA_HOST=`sg lxd -c "juju show-controller"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 756     OSMLCM_VCA_SECRET=`grep password ${HOME}/.local/share/juju/accounts.yaml |awk '{print $2}'`
 757     [ -z "$OSMLCM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 758     [ -z "$OSMLCM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 759     track juju
 760     [ -n "$INSTALL_NODOCKER" ] || install_docker_ce
 761     track docker_ce
 762     #install_docker_compose
 763     generate_docker_images
 764     track docker_build
 765     generate_config_log_folders
 766     generate_docker_env_files
 767     deploy_lightweight
 768     track docker_deploy
 769     [ -n "$INSTALL_VIMEMU" ] && install_vimemu && track vimemu
 770     [ -n "$INSTALL_ELK" ] && deploy_elk && track elk
 771     [ -n "$INSTALL_PERFMON" ] && deploy_perfmon && track perfmon
 772     install_osmclient
 773     track osmclient
 774     wget -q -O- https://osm-download.etsi.org/ftp/osm-4.0-four/README2.txt &> /dev/null
 775     track end
 776     return 0
 777 }
 778
 779 function install_vimemu() {
 780     echo "\nInstalling vim-emu"
 781     EMUTEMPDIR="$(mktemp -d -q --tmpdir "installosmvimemu.XXXXXX")"
 782     trap 'rm -rf "${EMUTEMPDIR}"' EXIT
 783     # clone vim-emu repository (attention: branch is currently master only)
 784     echo "Cloning vim-emu repository ..."
 785     git clone https://osm.etsi.org/gerrit/osm/vim-emu.git $EMUTEMPDIR
 786     # build vim-emu docker
 787     echo "Building vim-emu Docker container..."
 788     sudo docker build -t vim-emu-img -f $EMUTEMPDIR/Dockerfile --no-cache $EMUTEMPDIR/ || FATAL "cannot build vim-emu-img docker image"
 789     # start vim-emu container as daemon
 790     echo "Starting vim-emu Docker container 'vim-emu' ..."
 791     if [ -n "$INSTALL_LIGHTWEIGHT" ]; then
 792         # in lightweight mode, the emulator needs to be attached to netOSM
 793         sudo docker run --name vim-emu -t -d --restart always --privileged --pid='host' --network=netOSM -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
 794     else
 795         # classic build mode
 796         sudo docker run --name vim-emu -t -d --restart always --privileged --pid='host' -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
 797     fi
 798     echo "Waiting for 'vim-emu' container to start ..."
 799     sleep 5
 800     export VIMEMU_HOSTNAME=$(sudo docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vim-emu)
 801     echo "vim-emu running at ${VIMEMU_HOSTNAME} ..."
 802     # print vim-emu connection info
 803     echo -e "\nYou might be interested in adding the following vim-emu env variables to your .bashrc file:"
 804     echo "     export VIMEMU_HOSTNAME=${VIMEMU_HOSTNAME}"
 805     echo -e "To add the emulated VIM to OSM you should do:"
 806     echo "     osm vim-create --name emu-vim1 --user username --password password --auth_url http://${VIMEMU_HOSTNAME}:6001/v2.0 --tenant tenantName --account_type openstack"
 807 }
 808
 809 function dump_vars(){
 810     echo "DEVELOP=$DEVELOP"
 811     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 812     echo "UNINSTALL=$UNINSTALL"
 813     echo "NAT=$NAT"
 814     echo "UPDATE=$UPDATE"
 815     echo "RECONFIGURE=$RECONFIGURE"
 816     echo "TEST_INSTALLER=$TEST_INSTALLER"
 817     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 818     echo "INSTALL_LXD=$INSTALL_LXD"
 819     echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
 820     echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
 821     echo "LXD_REPOSITORY_PATH=$LXD_REPOSITORY_PATH"
 822     echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
 823     echo "INSTALL_ONLY=$INSTALL_ONLY"
 824     echo "INSTALL_ELK=$INSTALL_ELK"
 825     echo "INSTALL_PERFMON=$INSTALL_PERFMON"
 826     echo "TO_REBUILD=$TO_REBUILD"
 827     echo "INSTALL_NOLXD=$INSTALL_NOLXD"
 828     echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
 829     echo "RELEASE=$RELEASE"
 830     echo "REPOSITORY=$REPOSITORY"
 831     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 832     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 833     echo "NOCONFIGURE=$NOCONFIGURE"
 834     echo "SHOWOPTS=$SHOWOPTS"
 835     echo "Install from specific refspec (-b): $COMMIT_ID"
 836 }
 837
 838 function track(){
 839     ctime=`date +%s`
 840     duration=$((ctime - SESSION_ID))
 841     url="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
 842     #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
 843     event_name="bin"
 844     [ -z "$INSTALL_LIGHTWEIGHT" ] && [ -n "$INSTALL_FROM_SOURCE" ] && event_name="binsrc"
 845     [ -z "$INSTALL_LIGHTWEIGHT" ] && [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name="lxd"
 846     [ -n "$INSTALL_LIGHTWEIGHT" ] && event_name="lw"
 847     event_name="${event_name}_$1"
 848     url="${url}&event=${event_name}&ce_duration=${duration}"
 849     wget -q -O /dev/null $url
 850 }
 851
 852 UNINSTALL=""
 853 DEVELOP=""
 854 NAT=""
 855 UPDATE=""
 856 RECONFIGURE=""
 857 TEST_INSTALLER=""
 858 INSTALL_LXD=""
 859 SHOWOPTS=""
 860 COMMIT_ID=""
 861 ASSUME_YES=""
 862 INSTALL_FROM_SOURCE=""
 863 RELEASE="-R ReleaseFOUR"
 864 REPOSITORY="-r stable"
 865 INSTALL_VIMEMU=""
 866 INSTALL_FROM_LXDIMAGES=""
 867 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 868 LXD_REPOSITORY_PATH=""
 869 INSTALL_LIGHTWEIGHT="y"
 870 INSTALL_ONLY=""
 871 INSTALL_ELK=""
 872 INSTALL_PERFMON=""
 873 TO_REBUILD=""
 874 INSTALL_NOLXD=""
 875 INSTALL_NODOCKER=""
 876 NOCONFIGURE=""
 877 RELEASE_DAILY=""
 878 SESSION_ID=`date +%s`
 879 OSM_DEVOPS=
 880
 881 while getopts ":hy-:b:r:k:u:R:l:p:D:o:m:" o; do
 882     case "${o}" in
 883         h)
 884             usage && exit 0
 885             ;;
 886         b)
 887             COMMIT_ID=${OPTARG}
 888             ;;
 889         r)
 890             REPOSITORY="-r ${OPTARG}"
 891             ;;
 892         R)
 893             RELEASE="-R ${OPTARG}"
 894             ;;
 895         k)
 896             REPOSITORY_KEY="-k ${OPTARG}"
 897             ;;
 898         u)
 899             REPOSITORY_BASE="-u ${OPTARG}"
 900             ;;
 901         l)
 902             LXD_REPOSITORY_BASE="${OPTARG}"
 903             ;;
 904         p)
 905             LXD_REPOSITORY_PATH="${OPTARG}"
 906             ;;
 907         D)
 908             OSM_DEVOPS="${OPTARG}"
 909             ;;
 910         o)
 911             INSTALL_ONLY="y"
 912             [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
 913             [ "${OPTARG}" == "elk_stack" ] && INSTALL_ELK="y" && continue
 914             [ "${OPTARG}" == "pm_stack" ] && INSTALL_PERFMON="y" && continue
 915             ;;
 916         m)
 917             [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
 918             [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
 919             [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
 920             [ "${OPTARG}" == "LW-UI" ] && TO_REBUILD="$TO_REBUILD LW-UI" && continue
 921             [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
 922             [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
 923             [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
 924             [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
 925             ;;
 926         -)
 927             [ "${OPTARG}" == "help" ] && usage && exit 0
 928             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
 929             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 930             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 931             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 932             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 933             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 934             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 935             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 936             [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
 937             [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
 938             [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES="y" && continue
 939             [ "${OPTARG}" == "lightweight" ] && INSTALL_LIGHTWEIGHT="y" && continue
 940             [ "${OPTARG}" == "soui" ] && INSTALL_LIGHTWEIGHT="" && RELEASE="-R ReleaseTHREE" && REPOSITORY="-r stable" && continue
 941             [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
 942             [ "${OPTARG}" == "elk_stack" ] && INSTALL_ELK="y" && continue
 943             [ "${OPTARG}" == "pm_stack" ] && INSTALL_PERFMON="y" && continue
 944             [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE="y" && continue
 945             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 946             [ "${OPTARG}" == "daily" ] && RELEASE_DAILY="y" && continue
 947             echo -e "Invalid option: '--$OPTARG'\n" >&2
 948             usage && exit 1
 949             ;;
 950         \?)
 951             echo -e "Invalid option: '-$OPTARG'\n" >&2
 952             usage && exit 1
 953             ;;
 954         y)
 955             ASSUME_YES="y"
 956             ;;
 957         *)
 958             usage && exit 1
 959             ;;
 960     esac
 961 done
 962
 963 [ -n "$INSTALL_FROM_LXDIMAGES" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --lxd can only be used with --soui"
 964 [ -n "$NAT" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --nat can only be used with --soui"
 965 [ -n "$NOCONFIGURE" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --noconfigure can only be used with --soui"
 966 [ -n "$RELEASE_DAILY" ] && [ -n "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible options: --daily can only be used with --soui"
 967 [ -n "$INSTALL_NOLXD" ] && [ -z "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible option: --nolxd cannot be used with --soui"
 968 [ -n "$INSTALL_NODOCKER" ] && [ -z "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible option: --nodocker cannot be used with --soui"
 969 [ -n "$TO_REBUILD" ] && [ -z "$INSTALL_LIGHTWEIGHT" ] && FATAL "Incompatible option: -m cannot be used with --soui"
 970 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
 971
 972 if [ -n "$SHOWOPTS" ]; then
 973     dump_vars
 974     exit 0
 975 fi
 976
 977 [ -n "$RELEASE_DAILY" ] && echo -e "\nInstalling from daily build repo" && RELEASE="-R ReleaseTHREE-daily" && REPOSITORY="-r testing" && COMMIT_ID="master"
 978
 979 # if develop, we force master
 980 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 981
 982 # forcing source from master removed. Now only install from source when explicit
 983 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
 984
 985 if [ -z "$OSM_DEVOPS" ]; then
 986     if [ -n "$TEST_INSTALLER" ]; then
 987         echo -e "\nUsing local devops repo for OSM installation"
 988         TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 989     else
 990         echo -e "\nCreating temporary dir for OSM installation"
 991         TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 992         trap 'rm -rf "$TEMPDIR"' EXIT
 993     fi
 994 fi
 995
 996 need_packages="git jq wget curl tar"
 997 echo -e "Checking required packages: $need_packages"
 998 dpkg -l $need_packages &>/dev/null \
 999   || ! echo -e "One or several required packages are not installed. Updating apt cache requires root privileges." \
1000   || sudo apt-get update \
1001   || FATAL "failed to run apt-get update"
1002 dpkg -l $need_packages &>/dev/null \
1003   || ! echo -e "Installing $need_packages requires root privileges." \
1004   || sudo apt-get install -y $need_packages \
1005   || FATAL "failed to install $need_packages"
1006
1007 if [ -z "$OSM_DEVOPS" ]; then
1008     if [ -z "$TEST_INSTALLER" ]; then
1009         echo -e "\nCloning devops repo temporarily"
1010         git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
1011         RC_CLONE=$?
1012     fi
1013
1014     echo -e "\nGuessing the current stable release"
1015     LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
1016     [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
1017     echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
1018     [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
1019
1020     if [ -n "$RELEASE_DAILY" ]; then
1021         echo "Using master/HEAD devops"
1022         git -C $TEMPDIR checkout master
1023     elif [ -z "$TEST_INSTALLER" ]; then
1024         git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
1025     fi
1026     OSM_DEVOPS=$TEMPDIR
1027 fi
1028
1029 OSM_JENKINS="$OSM_DEVOPS/jenkins"
1030 . $OSM_JENKINS/common/all_funcs
1031
1032 [ -n "$INSTALL_LIGHTWEIGHT" ] && [ -n "$UNINSTALL" ] && uninstall_lightweight && echo -e "\nDONE" && exit 0
1033 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
1034 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
1035 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
1036 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
1037 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_ELK" ] && deploy_elk
1038 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_PERFMON" ] && deploy_perfmon
1039 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_VIMEMU" ] && install_vimemu
1040 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
1041
1042 #Installation starts here
1043 wget -q -O- https://osm-download.etsi.org/ftp/osm-4.0-four/README.txt &> /dev/null
1044 track start
1045
1046 [ -n "$INSTALL_LIGHTWEIGHT" ] && install_lightweight && echo -e "\nDONE" && exit 0
1047 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
1048 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
1049     ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
1050 fi
1051
1052 echo -e "Checking required packages: lxd"
1053 lxd --version &>/dev/null || FATAL "lxd not present, exiting."
1054 [ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd" && install_lxd
1055
1056 # use local devops for containers
1057 export OSM_USE_LOCAL_DEVOPS=true
1058 if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
1059     echo -e "\nCreating the containers and building from source ..."
1060     $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
1061     ro_is_up && track RO
1062     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
1063     vca_is_up && track VCA
1064     $OSM_DEVOPS/jenkins/host/start_build MON || FATAL "MON install failed"
1065     mon_is_up && track MON
1066     $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
1067     $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
1068     #so_is_up && track SOUI
1069     track SOUI
1070 elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
1071     echo -e "\nInstalling from lxd images ..."
1072     install_from_lxdimages
1073 else #install from binaries
1074     echo -e "\nCreating the containers and installing from binaries ..."
1075     $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
1076     ro_is_up && track RO
1077     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
1078     vca_is_up && track VCA
1079     $OSM_DEVOPS/jenkins/host/install MON || FATAL "MON build failed"
1080     mon_is_up && track MON
1081     $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
1082     $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
1083     #so_is_up && track SOUI
1084     track SOUI
1085 fi
1086
1087 #Install iptables-persistent and configure NAT rules
1088 [ -z "$NOCONFIGURE" ] && nat
1089
1090 #Configure components
1091 [ -z "$NOCONFIGURE" ] && configure
1092
1093 #Install osmclient
1094 [ -z "$NOCONFIGURE" ] && install_osmclient
1095
1096 #Install vim-emu (optional)
1097 [ -n "$INSTALL_VIMEMU" ] && install_docker_ce && install_vimemu
1098
1099 wget -q -O- https://osm-download.etsi.org/ftp/osm-4.0-four/README2.txt &> /dev/null
1100 track end
1101 echo -e "\nDONE"
1102