installers/full_install_osm.sh

   1 #!/bin/bash
   2 #
   3 #   Licensed under the Apache License, Version 2.0 (the "License");
   4 #   you may not use this file except in compliance with the License.
   5 #   You may obtain a copy of the License at
   6 #
   7 #       http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #   Unless required by applicable law or agreed to in writing, software
  10 #   distributed under the License is distributed on an "AS IS" BASIS,
  11 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #   See the License for the specific language governing permissions and
  13 #   limitations under the License.
  14 #
  15
  16 function usage(){
  17     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  18     echo -e "usage: $0 [OPTIONS]"
  19     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  20     echo -e "  OPTIONS"
  21     echo -e "     -h / --help:    print this help"
  22     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  23     echo -e "     -r <repo>:      use specified repository name for osm packages"
  24     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  25     echo -e "     -u <repo base>: use specified repository url for osm packages"
  26     echo -e "     -k <repo key>:  use specified repository public key url"
  27     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  28     echo -e "                     -b master          (main dev branch)"
  29     echo -e "                     -b v2.0            (v2.0 branch)"
  30     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  31     echo -e "                     ..."
  32     echo -e "     -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
  33     echo -e "     -s <namespace>  namespace when installed using k8s, default is osm"
  34     echo -e "     -H <VCA host>   use specific juju host controller IP"
  35     echo -e "     -S <VCA secret> use VCA/juju secret key"
  36     echo -e "     -P <VCA pubkey> use VCA/juju public key file"
  37     echo -e "     -A <VCA apiproxy> use VCA/juju API proxy"
  38     echo -e "     --pla:          install the PLA module for placement support"
  39     echo -e "     --old-sa:       install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
  40     echo -e "     --ng-sa:        install new Service Assurance framework (Airflow, AlertManager and Pushgateway)  (enabled by default)"
  41     echo -e "     -m <MODULE>:    install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
  42     echo -e "     -o <ADDON>:     ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
  43     echo -e "     -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
  44     echo -e "     -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
  45     echo -e "     -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
  46     echo -e "     -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
  47     echo -e "     -D <devops path> use local devops installation path"
  48     echo -e "     -w <work dir>   Location to store runtime installation"
  49     echo -e "     -t <docker tag> specify osm docker tag (default is latest)"
  50     echo -e "     -l:             LXD cloud yaml file"
  51     echo -e "     -L:             LXD credentials yaml file"
  52     echo -e "     -K:             Specifies the name of the controller to use - The controller must be already bootstrapped"
  53     echo -e "     -d <docker registry URL> use docker registry URL instead of dockerhub"
  54     echo -e "     -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
  55     echo -e "     -T <docker tag> specify docker tag for the modules specified with option -m"
  56     echo -e "     --debug:        debug mode"
  57     echo -e "     --nocachelxdimages:  do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
  58     echo -e "     --cachelxdimages:  cache local lxd images, create cronjob for that cache (will make installation longer)"
  59     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  60     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  61     echo -e "     --nojuju:       do not juju, assumes already installed"
  62     echo -e "     --nodockerbuild:do not build docker images (use existing locally cached images)"
  63     echo -e "     --nohostports:  do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
  64     echo -e "     --nohostclient: do not install the osmclient"
  65     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  66     echo -e "     --source:       install OSM from source code using the latest stable tag"
  67     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  68     echo -e "     --pullimages:   pull/run osm images from docker.io/opensourcemano"
  69     echo -e "     --k8s_monitor:  install the OSM kubernetes monitoring with prometheus and grafana"
  70     echo -e "     --volume:       create a VM volume when installing to OpenStack"
  71     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  72     echo -e "     --charmed:                   Deploy and operate OSM with Charms on k8s"
  73     echo -e "     [--bundle <bundle path>]:    Specify with which bundle to deploy OSM with charms (--charmed option)"
  74     echo -e "     [--k8s <kubeconfig path>]:   Specify with which kubernetes to deploy OSM with charms (--charmed option)"
  75     echo -e "     [--vca <name>]:              Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
  76     echo -e "     [--small-profile]:           Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
  77     echo -e "     [--lxd <yaml path>]:         Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
  78     echo -e "     [--lxd-cred <yaml path>]:    Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
  79     echo -e "     [--microstack]:              Installs microstack as a vim. (--charmed option)"
  80     echo -e "     [--overlay]:                 Add an overlay to override some defaults of the default bundle (--charmed option)"
  81     echo -e "     [--ha]:                      Installs High Availability bundle. (--charmed option)"
  82     echo -e "     [--tag]:                     Docker image tag. (--charmed option)"
  83     echo -e "     [--registry]:                Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
  84     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
  85 }
  86
  87 # takes a juju/accounts.yaml file and returns the password specific
  88 # for a controller. I wrote this using only bash tools to minimize
  89 # additions of other packages
  90 function parse_juju_password {
  91     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  92     password_file="${HOME}/.local/share/juju/accounts.yaml"
  93     local controller_name=$1
  94     local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034')
  95     sed -ne "s|^\($s\):|\1|" \
  96          -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
  97          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
  98     awk -F$fs -v controller=$controller_name '{
  99         indent = length($1)/2;
 100         vname[indent] = $2;
 101         for (i in vname) {if (i > indent) {delete vname[i]}}
 102         if (length($3) > 0) {
 103             vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
 104             if (match(vn,controller) && match($2,"password")) {
 105                 printf("%s",$3);
 106             }
 107         }
 108     }'
 109     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 110 }
 111
 112 function set_vca_variables() {
 113     OSM_VCA_CLOUDNAME="lxd-cloud"
 114     [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
 115     if [ -z "$OSM_VCA_HOST" ]; then
 116         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 117         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 118         [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 119     fi
 120     if [ -z "$OSM_VCA_SECRET" ]; then
 121         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
 122         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
 123         [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 124     fi
 125     if [ -z "$OSM_VCA_PUBKEY" ]; then
 126         OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub)
 127         [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
 128     fi
 129     if [ -z "$OSM_VCA_CACERT" ]; then
 130         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 131         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 132         [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
 133     fi
 134 }
 135
 136 function generate_secret() {
 137     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 138     head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32
 139     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 140 }
 141
 142 function check_packages() {
 143     NEEDED_PACKAGES="$1"
 144     echo -e "Checking required packages: ${NEEDED_PACKAGES}"
 145     for PACKAGE in ${NEEDED_PACKAGES} ; do
 146         dpkg -L ${PACKAGE}
 147         if [ $? -ne 0 ]; then
 148             echo -e "Package ${PACKAGE} is not installed."
 149             echo -e "Updating apt-cache ..."
 150             sudo apt-get update
 151             echo -e "Installing ${PACKAGE} ..."
 152             sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
 153         fi
 154     done
 155     echo -e "Required packages are present: ${NEEDED_PACKAGES}"
 156 }
 157
 158 function ask_user(){
 159     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 160     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 161     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 162     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 163     read -e -p "$1" USER_CONFIRMATION
 164     while true ; do
 165         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 166         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 167         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 168         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 169         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 170     done
 171     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 172 }
 173
 174 function install_osmclient(){
 175     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 176     CLIENT_RELEASE=${RELEASE#"-R "}
 177     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 178     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 179     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 180     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 181     curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
 182     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
 183     sudo apt-get update
 184     sudo apt-get install -y python3-pip
 185     sudo -H LC_ALL=C python3 -m pip install -U pip
 186     sudo -H LC_ALL=C python3 -m pip install -U python-magic pyangbind verboselogs
 187     sudo apt-get install -y python3-osm-im python3-osmclient
 188     if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
 189         python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
 190     fi
 191     if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
 192         sudo apt-get install -y libcurl4-openssl-dev libssl-dev libmagic1
 193         python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
 194     fi
 195     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 196     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 197     echo -e "\nOSM client installed"
 198     if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
 199         echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 200         echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 201         echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 202     else
 203         echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
 204         echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
 205         echo "     export OSM_HOSTNAME=<OSM_host>"
 206     fi
 207     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 208     return 0
 209 }
 210
 211 function docker_login() {
 212     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 213     echo "Docker login"
 214     [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}"
 215     sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
 216     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 217 }
 218
 219 function create_k8s_secret_regcred() {
 220     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 221     echo "Creating K8s secret regcred with the docker registry credentials from $HOME/.docker/config.json"
 222     kubectl -n osm create secret generic regcred \
 223         --from-file=.dockerconfigjson=$HOME/.docker/config.json \
 224         --type=kubernetes.io/dockerconfigjson
 225     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 226 }
 227
 228 function pull_docker_images() {
 229     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 230     echo "Pulling docker images"
 231     if [ -n "${DOCKER_REGISTRY_URL}" ]; then
 232         docker_login
 233         create_k8s_secret_registrycreds
 234     fi
 235
 236     echo "Pulling non-OSM docker images"
 237     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q KAFKA ; then
 238         sg docker -c "docker pull wurstmeister/zookeeper" || FATAL "cannot get zookeeper docker image"
 239         sg docker -c "docker pull wurstmeister/kafka:${KAFKA_TAG}" || FATAL "cannot get kafka docker image"
 240     fi
 241
 242     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS ; then
 243         sg docker -c "docker pull prom/prometheus:${PROMETHEUS_TAG}" || FATAL "cannot get prometheus docker image"
 244     fi
 245
 246     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS-CADVISOR ; then
 247         sg docker -c "docker pull google/cadvisor:${PROMETHEUS_CADVISOR_TAG}" || FATAL "cannot get prometheus cadvisor docker image"
 248     fi
 249
 250     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q GRAFANA ; then
 251         sg docker -c "docker pull grafana/grafana:${GRAFANA_TAG}" || FATAL "cannot get grafana docker image"
 252         sg docker -c "docker pull kiwigrid/k8s-sidecar:${KIWIGRID_K8S_SIDECAR_TAG}" || FATAL "cannot get kiwigrid k8s-sidecar docker image"
 253     fi
 254
 255     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q NBI || echo $TO_REBUILD | grep -q KEYSTONE-DB ; then
 256         sg docker -c "docker pull mariadb:${KEYSTONEDB_TAG}" || FATAL "cannot get keystone-db docker image"
 257     fi
 258
 259     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q RO ; then
 260         sg docker -c "docker pull mysql:5" || FATAL "cannot get mysql docker image"
 261     fi
 262
 263     list_of_modules="MON NBI KEYSTONE RO LCM NG-UI osmclient"
 264     if [ -n "$INSTALL_NGSA" ]; then
 265         list_of_modules="${list_of_modules} Airflow Webhook"
 266     else
 267         list_of_modules="${list_of_modules} POL"
 268     fi
 269     if [ -n "$INSTALL_PLA" ]; then
 270         list_of_modules="${list_of_modules} PLA"
 271     fi
 272     echo "Pulling OSM docker images for the following modules: ${list_of_modules}"
 273     for module in ${list_of_modules}; do
 274         module_lower=${module,,}
 275         module_tag="${OSM_DOCKER_TAG}"
 276         if [ -n "${MODULE_DOCKER_TAG}" ] && echo $TO_REBUILD | grep -q $module ; then
 277             module_tag="${MODULE_DOCKER_TAG}"
 278         fi
 279         echo "Pulling ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag} docker image"
 280         sg docker -c "docker pull ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag}" || FATAL "cannot pull $module docker image"
 281     done
 282
 283     echo "Finished pulling docker images"
 284     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 285 }
 286
 287 function generate_docker_images() {
 288     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 289     echo "Generating docker images"
 290     _build_from=$COMMIT_ID
 291     [ -z "$_build_from" ] && _build_from="latest"
 292     echo "OSM Docker images generated from $_build_from"
 293     LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
 294     trap 'rm -rf "${LWTEMPDIR}"' EXIT
 295     for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do
 296         if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then
 297             module_lower=${module,,}
 298             if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
 299                 continue
 300             fi
 301             git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module
 302             git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
 303             sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
 304         fi
 305     done
 306     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then
 307         BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY")
 308         BUILD_ARGS+=(--build-arg RELEASE="$RELEASE")
 309         BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY")
 310         BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE")
 311         sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
 312     fi
 313     echo "Finished generation of docker images"
 314     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 315 }
 316
 317 function cmp_overwrite() {
 318     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 319     file1="$1"
 320     file2="$2"
 321     if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then
 322         if [ -f "${file2}" ]; then
 323             ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
 324         else
 325             cp -b ${file1} ${file2}
 326         fi
 327     fi
 328     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 329 }
 330
 331 #deploys osm pods and services
 332 function deploy_osm_services() {
 333     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 334     # helm is already installed as part of install_kubeadm_cluster.sh
 335
 336     # Generate helm values to be passed with -f osm-values.yaml
 337     sudo mkdir -p ${OSM_HELM_WORK_DIR}
 338     sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
 339 vca:
 340   pubkey: \"${OSM_VCA_PUBKEY}\"
 341 EOF"
 342
 343     # Generate helm values to be passed with --set
 344     OSM_HELM_OPTS=""
 345     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
 346     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
 347     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}"
 348     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mon.config.OS_NOTIFIER_URI=http://${OSM_DEFAULT_IP}:8662"
 349     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
 350     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
 351     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
 352     [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
 353     [ ! "$OSM_DOCKER_TAG" == "13" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag=${OSM_DOCKER_TAG}"
 354     [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
 355
 356     echo "helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
 357     helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}
 358
 359     # Override existing values.yaml with the final values.yaml used to install OSM
 360     helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
 361     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 362 }
 363
 364 #deploy charmed services
 365 function deploy_charmed_services() {
 366     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 367     juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
 368     juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE
 369     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 370 }
 371
 372 function install_osm_ngsa_service() {
 373     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 374     NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 375     [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
 376     $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
 377     FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
 378     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 379 }
 380
 381 function add_local_k8scluster() {
 382     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 383     /usr/bin/osm --all-projects vim-create \
 384       --name _system-osm-vim \
 385       --account_type dummy \
 386       --auth_url http://dummy \
 387       --user osm --password osm --tenant osm \
 388       --description "dummy" \
 389       --config '{management_network_name: mgmt}'
 390     /usr/bin/osm --all-projects k8scluster-add \
 391       --creds ${HOME}/.kube/config \
 392       --vim _system-osm-vim \
 393       --k8s-nets '{"net1": null}' \
 394       --version '1.15' \
 395       --description "OSM Internal Cluster" \
 396       _system-osm-k8s
 397     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 398 }
 399
 400 function configure_apt_proxy() {
 401     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 402     OSM_APT_PROXY=$1
 403     OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt"
 404     echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}"
 405     if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
 406         sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
 407 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
 408 EOF"
 409     else
 410         sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE}
 411     fi
 412     sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}"
 413     track prereq apt_proxy_configured_ok
 414     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 415 }
 416
 417 function ask_proceed() {
 418     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 419
 420     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
 421     1. Install and configure LXD
 422     2. Install juju
 423     3. Install docker CE
 424     4. Disable swap space
 425     5. Install and initialize Kubernetes
 426     as pre-requirements.
 427     Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 428
 429     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 430 }
 431
 432 function check_osm_behind_proxy() {
 433     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 434
 435     export OSM_BEHIND_PROXY=""
 436     export OSM_PROXY_ENV_VARIABLES=""
 437     [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
 438     [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
 439     [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
 440     [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
 441     [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
 442     [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
 443
 444     echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
 445     echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
 446
 447     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 448         [ -z "$ASSUME_YES" ] && ! ask_user "
 449 The following env variables have been found for the current user:
 450 ${OSM_PROXY_ENV_VARIABLES}.
 451
 452 This suggests that this machine is behind a proxy and a special configuration is required.
 453 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
 454 env variables.
 455
 456 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
 457 Depending on the program, the env variables to work behind a proxy might be different
 458 (e.g. http_proxy vs HTTP_PROXY).
 459
 460 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
 461 and HTTPS_PROXY are defined.
 462
 463 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
 464 those env variables are also set for root user. If you are not sure whether those variables
 465 are configured for the root user, you can stop the installation now.
 466
 467 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
 468     else
 469         echo "This machine is not behind a proxy"
 470     fi
 471
 472     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 473 }
 474
 475 function find_devops_folder() {
 476     if [ -z "$OSM_DEVOPS" ]; then
 477         if [ -n "$TEST_INSTALLER" ]; then
 478             echo -e "\nUsing local devops repo for OSM installation"
 479             OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
 480         else
 481             echo -e "\nCreating temporary dir for OSM installation"
 482             OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 483             trap 'rm -rf "$OSM_DEVOPS"' EXIT
 484             git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
 485         fi
 486     fi
 487 }
 488
 489 function install_osm() {
 490     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 491
 492     trap ctrl_c INT
 493
 494     # TODO: move this under start
 495     [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
 496
 497     check_osm_behind_proxy
 498     track checks proxy_ok
 499
 500     check_packages "git wget curl tar snapd"
 501
 502     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 503
 504     find_devops_folder
 505
 506     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
 507
 508     track checks checkingroot_ok
 509     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 510     track checks noroot_ok
 511
 512     ask_proceed
 513     track checks proceed_ok
 514
 515     echo "Installing OSM"
 516
 517     echo "Determining IP address of the interface with the default route"
 518     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
 519     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
 520     [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 521     OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
 522     [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 523
 524     # configure apt proxy
 525     [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
 526
 527     # if no host is passed in, we need to install lxd, unless explicilty asked not to
 528     if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then
 529         LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
 530         [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
 531         $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
 532     fi
 533
 534     track prereq prereqok_ok
 535
 536     if [ ! -n "$INSTALL_NODOCKER" ]; then
 537         DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 538         [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
 539         [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
 540         $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
 541     fi
 542
 543     track docker_ce docker_ce_ok
 544
 545     echo "Creating folders for installation"
 546     [ ! -d "$OSM_WORK_DIR" ] && sudo mkdir -p $OSM_WORK_DIR
 547     sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_WORK_DIR/kubeadm-config.yaml
 548
 549     $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
 550     FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
 551     track k8scluster k8scluster_ok
 552
 553     JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
 554     [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
 555     [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
 556     [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
 557     [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
 558     [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
 559     $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
 560     set_vca_variables
 561     track juju juju_ok
 562
 563     # Deploy OSM services
 564     [ -z "$DOCKER_NOBUILD" ] && pull_docker_images
 565     [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
 566     track docker_images docker_images_ok
 567
 568     deploy_charmed_services
 569     track deploy_osm deploy_charmed_services_ok
 570     deploy_osm_services
 571     track deploy_osm deploy_osm_services_k8s_ok
 572     if [ -n "$INSTALL_K8S_MONITOR" ]; then
 573         # install OSM MONITORING
 574         install_k8s_monitoring
 575         track deploy_osm install_k8s_monitoring_ok
 576     fi
 577     if [ -n "$INSTALL_NGSA" ]; then
 578         # optional NGSA install
 579         install_osm_ngsa_service
 580         track deploy_osm install_osm_ngsa_ok
 581     fi
 582
 583     [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
 584     track osmclient osmclient_ok
 585
 586     echo -e "Checking OSM health state..."
 587     $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
 588     (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
 589     echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
 590     track healthchecks osm_unhealthy didnotconverge)
 591     track healthchecks after_healthcheck_ok
 592
 593     add_local_k8scluster
 594     track final_ops add_local_k8scluster_ok
 595
 596     arrange_docker_default_network_policy
 597
 598     wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
 599     track end
 600     sudo find /etc/osm
 601     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 602     return 0
 603 }
 604
 605 function install_to_openstack() {
 606     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 607
 608     if [ -z "$2" ]; then
 609         FATAL "OpenStack installer requires a valid external network name"
 610     fi
 611
 612     # Install Pip for Python3
 613     sudo apt install -y python3-pip python3-venv
 614     sudo -H LC_ALL=C python3 -m pip install -U pip
 615
 616     # Create a venv to avoid conflicts with the host installation
 617     python3 -m venv $OPENSTACK_PYTHON_VENV
 618
 619     source $OPENSTACK_PYTHON_VENV/bin/activate
 620
 621     # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
 622     python -m pip install -U wheel
 623     python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
 624
 625     # Install the Openstack cloud module (ansible>=2.10)
 626     ansible-galaxy collection install openstack.cloud
 627
 628     export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
 629
 630     OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
 631
 632     ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
 633
 634     if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
 635         ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
 636     fi
 637
 638     if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
 639         ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
 640     fi
 641
 642     # Execute the Ansible playbook based on openrc or clouds.yaml
 643     if [ -e "$1" ]; then
 644         . $1
 645         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 646         $OSM_DEVOPS/installers/openstack/site.yml
 647     else
 648         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 649         -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
 650     fi
 651
 652     # Exit from venv
 653     deactivate
 654
 655     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 656     return 0
 657 }
 658
 659 function arrange_docker_default_network_policy() {
 660     echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
 661     sudo iptables -I DOCKER-USER -j ACCEPT
 662     sudo iptables-save | sudo tee /etc/iptables/rules.v4
 663     sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
 664 }
 665
 666 function install_k8s_monitoring() {
 667     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 668     # install OSM monitoring
 669     sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
 670     sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
 671     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 672 }
 673
 674 function dump_vars(){
 675     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 676     echo "APT_PROXY_URL=$APT_PROXY_URL"
 677     echo "DEVELOP=$DEVELOP"
 678     echo "DEBUG_INSTALL=$DEBUG_INSTALL"
 679     echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
 680     echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
 681     echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
 682     echo "DOCKER_USER=$DOCKER_USER"
 683     echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
 684     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 685     echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
 686     echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
 687     echo "INSTALL_LXD=$INSTALL_LXD"
 688     echo "INSTALL_NGSA=$INSTALL_NGSA"
 689     echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
 690     echo "INSTALL_NOJUJU=$INSTALL_NOJUJU"
 691     echo "INSTALL_NOLXD=$INSTALL_NOLXD"
 692     echo "INSTALL_ONLY=$INSTALL_ONLY"
 693     echo "INSTALL_PLA=$INSTALL_PLA"
 694     echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
 695     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 696     echo "NO_HOST_PORTS=$NO_HOST_PORTS"
 697     echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
 698     echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
 699     echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
 700     echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
 701     echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
 702     echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
 703     echo "OSM_DEVOPS=$OSM_DEVOPS"
 704     echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
 705     echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
 706     echo "OSM_NAMESPACE=$OSM_NAMESPACE"
 707     echo "OSM_VCA_HOST=$OSM_VCA_HOST"
 708     echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
 709     echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
 710     echo "OSM_WORK_DIR=$OSM_WORK_DIR"
 711     echo "PULL_IMAGES=$PULL_IMAGES"
 712     echo "RECONFIGURE=$RECONFIGURE"
 713     echo "RELEASE=$RELEASE"
 714     echo "REPOSITORY=$REPOSITORY"
 715     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 716     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 717     echo "SHOWOPTS=$SHOWOPTS"
 718     echo "TEST_INSTALLER=$TEST_INSTALLER"
 719     echo "TO_REBUILD=$TO_REBUILD"
 720     echo "UNINSTALL=$UNINSTALL"
 721     echo "UPDATE=$UPDATE"
 722     echo "Install from specific refspec (-b): $COMMIT_ID"
 723     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 724 }
 725
 726 function parse_docker_registry_url() {
 727     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 728     DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}')
 729     DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}')
 730     DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}')
 731     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 732 }
 733
 734 function ctrl_c() {
 735     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 736     echo "** Trapped CTRL-C"
 737     FATAL "User stopped the installation"
 738     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 739 }
 740
 741 UNINSTALL=""
 742 DEVELOP=""
 743 UPDATE=""
 744 RECONFIGURE=""
 745 TEST_INSTALLER=""
 746 INSTALL_LXD=""
 747 SHOWOPTS=""
 748 COMMIT_ID=""
 749 ASSUME_YES=""
 750 APT_PROXY_URL=""
 751 INSTALL_FROM_SOURCE=""
 752 DEBUG_INSTALL=""
 753 RELEASE="ReleaseTEN"
 754 REPOSITORY="stable"
 755 INSTALL_K8S_MONITOR=""
 756 INSTALL_NGSA="y"
 757 INSTALL_PLA=""
 758 INSTALL_VIMEMU=""
 759 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 760 LXD_REPOSITORY_PATH=""
 761 INSTALL_LIGHTWEIGHT="y"
 762 INSTALL_TO_OPENSTACK=""
 763 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
 764 OPENSTACK_PUBLIC_NET_NAME=""
 765 OPENSTACK_ATTACH_VOLUME="false"
 766 OPENSTACK_SSH_KEY_FILE=""
 767 OPENSTACK_USERDATA_FILE=""
 768 OPENSTACK_VM_NAME="server-osm"
 769 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
 770 INSTALL_ONLY=""
 771 TO_REBUILD=""
 772 INSTALL_NOLXD=""
 773 INSTALL_NODOCKER=""
 774 INSTALL_NOJUJU=""
 775 INSTALL_NOHOSTCLIENT=""
 776 INSTALL_CACHELXDIMAGES=""
 777 OSM_DEVOPS=
 778 OSM_VCA_HOST=
 779 OSM_VCA_SECRET=
 780 OSM_VCA_PUBKEY=
 781 OSM_VCA_CLOUDNAME="localhost"
 782 OSM_VCA_K8S_CLOUDNAME="k8scloud"
 783 OSM_NAMESPACE=osm
 784 NO_HOST_PORTS=""
 785 DOCKER_NOBUILD=""
 786 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 787 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
 788 OSM_WORK_DIR="/etc/osm"
 789 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
 790 OSM_HOST_VOL="/var/lib/osm"
 791 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
 792 OSM_DOCKER_TAG=latest
 793 DOCKER_USER=opensourcemano
 794 PULL_IMAGES="y"
 795 KAFKA_TAG=2.11-1.0.2
 796 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
 797 PROMETHEUS_TAG=v2.28.1
 798 GRAFANA_TAG=8.1.1
 799 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
 800 PROMETHEUS_CADVISOR_TAG=latest
 801 KEYSTONEDB_TAG=10
 802 OSM_DATABASE_COMMONKEY=
 803 ELASTIC_VERSION=6.4.2
 804 ELASTIC_CURATOR_VERSION=5.5.4
 805 POD_NETWORK_CIDR=10.244.0.0/16
 806 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
 807 RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$'
 808 DOCKER_REGISTRY_URL=
 809 DOCKER_PROXY_URL=
 810 MODULE_DOCKER_TAG=
 811 OSM_INSTALLATION_TYPE="Default"
 812
 813 while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
 814     case "${o}" in
 815         a)
 816             APT_PROXY_URL=${OPTARG}
 817             ;;
 818         b)
 819             COMMIT_ID=${OPTARG}
 820             PULL_IMAGES=""
 821             ;;
 822         r)
 823             REPOSITORY="${OPTARG}"
 824             REPO_ARGS+=(-r "$REPOSITORY")
 825             ;;
 826         k)
 827             REPOSITORY_KEY="${OPTARG}"
 828             REPO_ARGS+=(-k "$REPOSITORY_KEY")
 829             ;;
 830         u)
 831             REPOSITORY_BASE="${OPTARG}"
 832             REPO_ARGS+=(-u "$REPOSITORY_BASE")
 833             ;;
 834         R)
 835             RELEASE="${OPTARG}"
 836             REPO_ARGS+=(-R "$RELEASE")
 837             ;;
 838         D)
 839             OSM_DEVOPS="${OPTARG}"
 840             ;;
 841         o)
 842             INSTALL_ONLY="y"
 843             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 844             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 845             ;;
 846         O)
 847             INSTALL_TO_OPENSTACK="y"
 848             if [ -n "${OPTARG}" ]; then
 849                 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
 850             else
 851                 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
 852                 usage && exit 1
 853             fi
 854             ;;
 855         f)
 856             OPENSTACK_SSH_KEY_FILE="${OPTARG}"
 857             ;;
 858         F)
 859             OPENSTACK_USERDATA_FILE="${OPTARG}"
 860             ;;
 861         N)
 862             OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
 863             ;;
 864         m)
 865             [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
 866             [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
 867             [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
 868             [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
 869             [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
 870             [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
 871             [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
 872             [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
 873             [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
 874             [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
 875             [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
 876             [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
 877             [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
 878             [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
 879             [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
 880             ;;
 881         H)
 882             OSM_VCA_HOST="${OPTARG}"
 883             ;;
 884         S)
 885             OSM_VCA_SECRET="${OPTARG}"
 886             ;;
 887         s)
 888             OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
 889             ;;
 890         t)
 891             OSM_DOCKER_TAG="${OPTARG}"
 892             REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
 893             ;;
 894         U)
 895             DOCKER_USER="${OPTARG}"
 896             ;;
 897         P)
 898             OSM_VCA_PUBKEY=$(cat ${OPTARG})
 899             ;;
 900         A)
 901             OSM_VCA_APIPROXY="${OPTARG}"
 902             ;;
 903         l)
 904             LXD_CLOUD_FILE="${OPTARG}"
 905             ;;
 906         L)
 907             LXD_CRED_FILE="${OPTARG}"
 908             ;;
 909         K)
 910             CONTROLLER_NAME="${OPTARG}"
 911             ;;
 912         d)
 913             DOCKER_REGISTRY_URL="${OPTARG}"
 914             ;;
 915         p)
 916             DOCKER_PROXY_URL="${OPTARG}"
 917             ;;
 918         T)
 919             MODULE_DOCKER_TAG="${OPTARG}"
 920             ;;
 921         -)
 922             [ "${OPTARG}" == "help" ] && usage && exit 0
 923             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
 924             [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
 925             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 926             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 927             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 928             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 929             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 930             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 931             [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
 932             [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
 933             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 934             [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
 935             [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue
 936             [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
 937             [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
 938             [ "${OPTARG}" == "pullimages" ] && continue
 939             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 940             [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
 941             [ "${OPTARG}" == "bundle" ] && continue
 942             [ "${OPTARG}" == "k8s" ] && continue
 943             [ "${OPTARG}" == "lxd" ] && continue
 944             [ "${OPTARG}" == "lxd-cred" ] && continue
 945             [ "${OPTARG}" == "microstack" ] && continue
 946             [ "${OPTARG}" == "overlay" ] && continue
 947             [ "${OPTARG}" == "only-vca" ] && continue
 948             [ "${OPTARG}" == "small-profile" ] && continue
 949             [ "${OPTARG}" == "vca" ] && continue
 950             [ "${OPTARG}" == "ha" ] && continue
 951             [ "${OPTARG}" == "tag" ] && continue
 952             [ "${OPTARG}" == "registry" ] && continue
 953             [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
 954             [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
 955             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 956             [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
 957             [ "${OPTARG}" == "nocachelxdimages" ] && continue
 958             [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
 959             echo -e "Invalid option: '--$OPTARG'\n" >&2
 960             usage && exit 1
 961             ;;
 962         :)
 963             echo "Option -$OPTARG requires an argument" >&2
 964             usage && exit 1
 965             ;;
 966         \?)
 967             echo -e "Invalid option: '-$OPTARG'\n" >&2
 968             usage && exit 1
 969             ;;
 970         h)
 971             usage && exit 0
 972             ;;
 973         y)
 974             ASSUME_YES="y"
 975             ;;
 976         *)
 977             usage && exit 1
 978             ;;
 979     esac
 980 done
 981
 982 source $OSM_DEVOPS/common/all_funcs
 983
 984 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
 985 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
 986
 987 # Uninstall if "--uninstall"
 988 if [ -n "$UNINSTALL" ]; then
 989     if [ -n "$CHARMED" ]; then
 990         ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
 991         FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
 992     else
 993         ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
 994         FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
 995     fi
 996     echo -e "\nDONE"
 997     exit 0
 998 fi
 999
1000 # Charmed installation
1001 if [ -n "$CHARMED" ]; then
1002     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
1003     export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
1004     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
1005     ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
1006     FATAL_TRACK charmed_install "charmed_install.sh failed"
1007     wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
1008     track end installation_type $OSM_INSTALLATION_TYPE
1009     echo -e "\nDONE"
1010     exit 0
1011 fi
1012
1013 # Installation to Openstack
1014 if [ -n "$INSTALL_TO_OPENSTACK" ]; then
1015     install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
1016     echo -e "\nDONE"
1017     exit 0
1018 fi
1019
1020 # Community_installer
1021
1022 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
1023 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
1024 # if develop, we force master
1025 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
1026 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
1027 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
1028 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
1029 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
1030
1031 #Installation starts here
1032 wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README.txt &> /dev/null
1033 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
1034 install_osm
1035 echo -e "\nDONE"
1036 exit 0