installers/full_install_osm.sh

   1 #!/bin/bash
   2 #
   3 #   Licensed under the Apache License, Version 2.0 (the "License");
   4 #   you may not use this file except in compliance with the License.
   5 #   You may obtain a copy of the License at
   6 #
   7 #       http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #   Unless required by applicable law or agreed to in writing, software
  10 #   distributed under the License is distributed on an "AS IS" BASIS,
  11 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #   See the License for the specific language governing permissions and
  13 #   limitations under the License.
  14 #
  15
  16 function usage(){
  17     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  18     echo -e "usage: $0 [OPTIONS]"
  19     echo -e "Install OSM"
  20     echo -e "  OPTIONS"
  21     echo -e "     -h / --help:    print this help"
  22     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  23     echo -e "     -r <repo>:      use specified repository name for osm packages"
  24     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  25     echo -e "     -u <repo base>: use specified repository url for osm packages"
  26     echo -e "     -k <repo key>:  use specified repository public key url"
  27     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  28     echo -e "                     -b master          (main dev branch)"
  29     echo -e "                     -b v2.0            (v2.0 branch)"
  30     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  31     echo -e "                     ..."
  32     echo -e "     -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
  33     echo -e "     -c <kubernetes engine>: use a specific kubernetes engine (options: kubeadm, k3s, microk8s), default is kubeadm"
  34     echo -e "     -s <namespace>  namespace when installed using k8s, default is osm"
  35     echo -e "     -H <VCA host>   use specific juju host controller IP"
  36     echo -e "     -S <VCA secret> use VCA/juju secret key"
  37     echo -e "     -P <VCA pubkey> use VCA/juju public key file"
  38     echo -e "     -A <VCA apiproxy> use VCA/juju API proxy"
  39     echo -e "     --pla:          install the PLA module for placement support"
  40     echo -e "     --old-sa:       install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
  41     echo -e "     --ng-sa:        install new Service Assurance framework (Airflow, AlertManager and Pushgateway)  (enabled by default)"
  42     echo -e "     -m <MODULE>:    install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
  43     echo -e "     -o <ADDON>:     ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
  44     echo -e "     -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
  45     echo -e "     -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
  46     echo -e "     -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
  47     echo -e "     -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
  48     echo -e "     -D <devops path> use local devops installation path"
  49     echo -e "     -w <work dir>   Location to store runtime installation"
  50     echo -e "     -t <docker tag> specify osm docker tag (default is latest)"
  51     echo -e "     -l:             LXD cloud yaml file"
  52     echo -e "     -L:             LXD credentials yaml file"
  53     echo -e "     -K:             Specifies the name of the controller to use - The controller must be already bootstrapped"
  54     echo -e "     -d <docker registry URL> use docker registry URL instead of dockerhub"
  55     echo -e "     -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
  56     echo -e "     -T <docker tag> specify docker tag for the modules specified with option -m"
  57     echo -e "     --debug:        debug mode"
  58     echo -e "     --nocachelxdimages:  do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
  59     echo -e "     --cachelxdimages:  cache local lxd images, create cronjob for that cache (will make installation longer)"
  60     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  61     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  62     echo -e "     --nojuju:       do not juju, assumes already installed"
  63     echo -e "     --nodockerbuild:do not build docker images (use existing locally cached images)"
  64     echo -e "     --nohostports:  do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
  65     echo -e "     --nohostclient: do not install the osmclient"
  66     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  67     echo -e "     --source:       install OSM from source code using the latest stable tag"
  68     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  69     echo -e "     --pullimages:   pull/run osm images from docker.io/opensourcemano"
  70     echo -e "     --k8s_monitor:  install the OSM kubernetes monitoring with prometheus and grafana"
  71     echo -e "     --volume:       create a VM volume when installing to OpenStack"
  72     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  73     echo -e "     --charmed:                   Deploy and operate OSM with Charms on k8s"
  74     echo -e "     [--bundle <bundle path>]:    Specify with which bundle to deploy OSM with charms (--charmed option)"
  75     echo -e "     [--k8s <kubeconfig path>]:   Specify with which kubernetes to deploy OSM with charms (--charmed option)"
  76     echo -e "     [--vca <name>]:              Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
  77     echo -e "     [--small-profile]:           Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
  78     echo -e "     [--lxd <yaml path>]:         Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
  79     echo -e "     [--lxd-cred <yaml path>]:    Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
  80     echo -e "     [--microstack]:              Installs microstack as a vim. (--charmed option)"
  81     echo -e "     [--overlay]:                 Add an overlay to override some defaults of the default bundle (--charmed option)"
  82     echo -e "     [--ha]:                      Installs High Availability bundle. (--charmed option)"
  83     echo -e "     [--tag]:                     Docker image tag. (--charmed option)"
  84     echo -e "     [--registry]:                Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
  85     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
  86 }
  87
  88 # takes a juju/accounts.yaml file and returns the password specific
  89 # for a controller. I wrote this using only bash tools to minimize
  90 # additions of other packages
  91 function parse_juju_password {
  92     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  93     password_file="${HOME}/.local/share/juju/accounts.yaml"
  94     local controller_name=$1
  95     local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034')
  96     sed -ne "s|^\($s\):|\1|" \
  97          -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
  98          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
  99     awk -F$fs -v controller=$controller_name '{
 100         indent = length($1)/2;
 101         vname[indent] = $2;
 102         for (i in vname) {if (i > indent) {delete vname[i]}}
 103         if (length($3) > 0) {
 104             vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
 105             if (match(vn,controller) && match($2,"password")) {
 106                 printf("%s",$3);
 107             }
 108         }
 109     }'
 110     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 111 }
 112
 113 function set_vca_variables() {
 114     OSM_VCA_CLOUDNAME="lxd-cloud"
 115     [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
 116     if [ -z "$OSM_VCA_HOST" ]; then
 117         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 118         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 119         [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 120     fi
 121     if [ -z "$OSM_VCA_SECRET" ]; then
 122         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
 123         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
 124         [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 125     fi
 126     if [ -z "$OSM_VCA_PUBKEY" ]; then
 127         OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub)
 128         [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
 129     fi
 130     if [ -z "$OSM_VCA_CACERT" ]; then
 131         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 132         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 133         [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
 134     fi
 135 }
 136
 137 function generate_secret() {
 138     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 139     head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32
 140     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 141 }
 142
 143 function check_packages() {
 144     NEEDED_PACKAGES="$1"
 145     echo -e "Checking required packages: ${NEEDED_PACKAGES}"
 146     for PACKAGE in ${NEEDED_PACKAGES} ; do
 147         dpkg -L ${PACKAGE}
 148         if [ $? -ne 0 ]; then
 149             echo -e "Package ${PACKAGE} is not installed."
 150             echo -e "Updating apt-cache ..."
 151             sudo apt-get update
 152             echo -e "Installing ${PACKAGE} ..."
 153             sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
 154         fi
 155     done
 156     echo -e "Required packages are present: ${NEEDED_PACKAGES}"
 157 }
 158
 159 function ask_user(){
 160     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 161     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 162     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 163     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 164     read -e -p "$1" USER_CONFIRMATION
 165     while true ; do
 166         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 167         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 168         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 169         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 170         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 171     done
 172     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 173 }
 174
 175 function install_osmclient(){
 176     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 177     CLIENT_RELEASE=${RELEASE#"-R "}
 178     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 179     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 180     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 181     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 182     curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
 183     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
 184     sudo apt-get -y update
 185     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip
 186     sudo -H LC_ALL=C python3 -m pip install -U pip
 187     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient
 188     if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
 189         python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
 190     fi
 191     if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
 192         sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libmagic1
 193         python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
 194     fi
 195     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 196     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 197     echo -e "\nOSM client installed"
 198     if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
 199         echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 200         echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 201         echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 202     else
 203         echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
 204         echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
 205         echo "     export OSM_HOSTNAME=<OSM_host>"
 206     fi
 207     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 208     return 0
 209 }
 210
 211 function docker_login() {
 212     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 213     echo "Docker login"
 214     [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}"
 215     sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
 216     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 217 }
 218
 219 function generate_docker_images() {
 220     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 221     echo "Generating docker images"
 222     _build_from=$COMMIT_ID
 223     [ -z "$_build_from" ] && _build_from="latest"
 224     echo "OSM Docker images generated from $_build_from"
 225     LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
 226     trap 'rm -rf "${LWTEMPDIR}"' EXIT
 227     for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do
 228         if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then
 229             module_lower=${module,,}
 230             if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
 231                 continue
 232             fi
 233             git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module
 234             git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
 235             sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
 236         fi
 237     done
 238     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then
 239         BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY")
 240         BUILD_ARGS+=(--build-arg RELEASE="$RELEASE")
 241         BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY")
 242         BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE")
 243         sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
 244     fi
 245     echo "Finished generation of docker images"
 246     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 247 }
 248
 249 function cmp_overwrite() {
 250     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 251     file1="$1"
 252     file2="$2"
 253     if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then
 254         if [ -f "${file2}" ]; then
 255             ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
 256         else
 257             cp -b ${file1} ${file2}
 258         fi
 259     fi
 260     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 261 }
 262
 263 #deploys osm pods and services
 264 function deploy_osm_services() {
 265     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 266     # helm is already installed as part of install_kubeadm_cluster.sh
 267
 268     # Generate helm values to be passed with -f osm-values.yaml
 269     sudo mkdir -p ${OSM_HELM_WORK_DIR}
 270     if [ -n "${INSTALL_JUJU}" ]; then
 271         sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
 272 vca:
 273   pubkey: \"${OSM_VCA_PUBKEY}\"
 274 EOF"
 275     fi
 276
 277     # Generate helm values to be passed with --set
 278     OSM_HELM_OPTS=""
 279     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
 280     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
 281     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}"
 282     if [ -n "${INSTALL_JUJU}" ]; then
 283         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.enabled=true"
 284         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
 285         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
 286         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
 287     fi
 288     [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
 289     [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag=${OSM_DOCKER_TAG}"
 290     [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
 291     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 292         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true"
 293         [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=\"${HTTP_PROXY}\""
 294         [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=\"${HTTPS_PROXY}\""
 295         if [ -n "${NO_PROXY}" ]; then
 296             if [[ ! "${NO_PROXY}" =~ .*".svc".* ]]; then
 297                 NO_PROXY="${NO_PROXY},.svc"
 298             fi
 299             if [[ ! "${NO_PROXY}" =~ .*".cluster.local".* ]]; then
 300                 NO_PROXY="${NO_PROXY},.cluster.local"
 301             fi
 302             OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=\"${NO_PROXY//,/\,}\""
 303         fi
 304     fi
 305
 306     if [ -n "${INSTALL_JUJU}" ]; then
 307         OSM_HELM_OPTS="-f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
 308     fi
 309     echo "helm install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}"
 310     helm install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}
 311     # Override existing values.yaml with the final values.yaml used to install OSM
 312     helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
 313     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 314 }
 315
 316 #deploy charmed services
 317 function deploy_charmed_services() {
 318     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 319     juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
 320     juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable
 321     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 322 }
 323
 324 #deploy mongodb
 325 function deploy_mongodb() {
 326     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 327     MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 328     [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
 329     $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
 330     FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed"
 331     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 332 }
 333
 334 function install_osm_ngsa_service() {
 335     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 336     NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 337     [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
 338     $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
 339     FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
 340     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 341 }
 342
 343 function add_local_k8scluster() {
 344     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 345     /usr/bin/osm --all-projects vim-create \
 346       --name _system-osm-vim \
 347       --account_type dummy \
 348       --auth_url http://dummy \
 349       --user osm --password osm --tenant osm \
 350       --description "dummy" \
 351       --config '{management_network_name: mgmt}'
 352     /usr/bin/osm --all-projects k8scluster-add \
 353       --creds ${HOME}/.kube/config \
 354       --vim _system-osm-vim \
 355       --k8s-nets '{"net1": null}' \
 356       --version '1.15' \
 357       --description "OSM Internal Cluster" \
 358       _system-osm-k8s
 359     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 360 }
 361
 362 function configure_apt_proxy() {
 363     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 364     OSM_APT_PROXY=$1
 365     OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt"
 366     echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}"
 367     if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
 368         sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
 369 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
 370 EOF"
 371     else
 372         sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE}
 373     fi
 374     sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}"
 375     track prereq apt_proxy_configured_ok
 376     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 377 }
 378
 379 function ask_proceed() {
 380     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 381
 382     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
 383     1. Install and configure LXD
 384     2. Install juju
 385     3. Install docker CE
 386     4. Disable swap space
 387     5. Install and initialize Kubernetes
 388     as pre-requirements.
 389     Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 390
 391     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 392 }
 393
 394 function check_osm_behind_proxy() {
 395     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 396
 397     export OSM_BEHIND_PROXY=""
 398     export OSM_PROXY_ENV_VARIABLES=""
 399     [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
 400     [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
 401     [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
 402     [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
 403     [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
 404     [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
 405
 406     echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
 407     echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
 408
 409     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 410         [ -z "$ASSUME_YES" ] && ! ask_user "
 411 The following env variables have been found for the current user:
 412 ${OSM_PROXY_ENV_VARIABLES}.
 413
 414 This suggests that this machine is behind a proxy and a special configuration is required.
 415 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
 416 env variables.
 417
 418 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
 419 Depending on the program, the env variables to work behind a proxy might be different
 420 (e.g. http_proxy vs HTTP_PROXY).
 421
 422 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
 423 and HTTPS_PROXY are defined.
 424
 425 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
 426 those env variables are also set for root user. If you are not sure whether those variables
 427 are configured for the root user, you can stop the installation now.
 428
 429 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
 430     else
 431         echo "This machine is not behind a proxy"
 432     fi
 433
 434     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 435 }
 436
 437 function find_devops_folder() {
 438     if [ -z "$OSM_DEVOPS" ]; then
 439         if [ -n "$TEST_INSTALLER" ]; then
 440             echo -e "\nUsing local devops repo for OSM installation"
 441             OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
 442         else
 443             echo -e "\nCreating temporary dir for OSM installation"
 444             OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 445             trap 'rm -rf "$OSM_DEVOPS"' EXIT
 446             git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
 447         fi
 448     fi
 449 }
 450
 451 function install_osm() {
 452     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 453
 454     trap ctrl_c INT
 455
 456
 457     check_osm_behind_proxy
 458     check_packages "git wget curl tar snapd"
 459     if [ -n "${INSTALL_JUJU}" ]; then
 460         sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 461     fi
 462     find_devops_folder
 463
 464     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
 465
 466     track checks checkingroot_ok
 467     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 468     track checks noroot_ok
 469     ask_proceed
 470     track checks proceed_ok
 471
 472     echo "Installing OSM"
 473
 474     [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
 475
 476     echo "Determining IP address of the interface with the default route"
 477     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
 478     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
 479     [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 480     OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
 481     [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 482
 483     # configure apt proxy
 484     [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
 485
 486     # if lxd is requested, we will install it
 487     if [ -n "$INSTALL_LXD" ]; then
 488         LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
 489         [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
 490         $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
 491     fi
 492
 493     track prereq prereqok_ok
 494
 495     if [ -n "$INSTALL_DOCKER" ] || [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 496         DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 497         [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
 498         [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
 499         $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
 500     fi
 501
 502     track docker_ce docker_ce_ok
 503
 504     if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 505         $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
 506         FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
 507         track k8scluster k8scluster_ok
 508     fi
 509
 510     if [ -n "${INSTALL_JUJU}" ]; then
 511         JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_CACHELXDIMAGES}"
 512         [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
 513         [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
 514         [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
 515         [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
 516         [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
 517         $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
 518         set_vca_variables
 519     fi
 520     track juju juju_ok
 521
 522     # Deploy OSM services
 523     [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
 524     track docker_images docker_images_ok
 525
 526     deploy_mongodb
 527     track deploy_osm deploy_mongodb_ok
 528     deploy_osm_services
 529     track deploy_osm deploy_osm_services_k8s_ok
 530     if [ -n "$INSTALL_K8S_MONITOR" ]; then
 531         # install OSM MONITORING
 532         install_k8s_monitoring
 533         track deploy_osm install_k8s_monitoring_ok
 534     fi
 535     if [ -n "$INSTALL_NGSA" ]; then
 536         # optional NGSA install
 537         install_osm_ngsa_service
 538         track deploy_osm install_osm_ngsa_ok
 539     fi
 540
 541     [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
 542     track osmclient osmclient_ok
 543
 544     echo -e "Checking OSM health state..."
 545     $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
 546     (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
 547     echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
 548     track healthchecks osm_unhealthy didnotconverge)
 549     track healthchecks after_healthcheck_ok
 550
 551     add_local_k8scluster
 552     track final_ops add_local_k8scluster_ok
 553
 554     # if lxd is requested, iptables firewall is updated to work with both docker and LXD
 555     if [ -n "$INSTALL_LXD" ]; then
 556         arrange_docker_default_network_policy
 557     fi
 558
 559     wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
 560     track end
 561     sudo find /etc/osm
 562     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 563     return 0
 564 }
 565
 566 function install_to_openstack() {
 567     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 568
 569     if [ -z "$2" ]; then
 570         FATAL "OpenStack installer requires a valid external network name"
 571     fi
 572
 573     # Install Pip for Python3
 574     sudo apt install -y python3-pip python3-venv
 575     sudo -H LC_ALL=C python3 -m pip install -U pip
 576
 577     # Create a venv to avoid conflicts with the host installation
 578     python3 -m venv $OPENSTACK_PYTHON_VENV
 579
 580     source $OPENSTACK_PYTHON_VENV/bin/activate
 581
 582     # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
 583     python -m pip install -U wheel
 584     python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
 585
 586     # Install the Openstack cloud module (ansible>=2.10)
 587     ansible-galaxy collection install openstack.cloud
 588
 589     export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
 590
 591     OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
 592
 593     ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
 594
 595     if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
 596         ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
 597     fi
 598
 599     if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
 600         ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
 601     fi
 602
 603     # Execute the Ansible playbook based on openrc or clouds.yaml
 604     if [ -e "$1" ]; then
 605         . $1
 606         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 607         $OSM_DEVOPS/installers/openstack/site.yml
 608     else
 609         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 610         -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
 611     fi
 612
 613     # Exit from venv
 614     deactivate
 615
 616     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 617     return 0
 618 }
 619
 620 function arrange_docker_default_network_policy() {
 621     echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
 622     sudo iptables -I DOCKER-USER -j ACCEPT
 623     sudo iptables-save | sudo tee /etc/iptables/rules.v4
 624     sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
 625 }
 626
 627 function install_k8s_monitoring() {
 628     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 629     # install OSM monitoring
 630     sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
 631     sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
 632     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 633 }
 634
 635 function dump_vars(){
 636     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 637     echo "APT_PROXY_URL=$APT_PROXY_URL"
 638     echo "K8S_CLUSTER_ENGINE=$K8S_CLUSTER_ENGINE"
 639     echo "DEVELOP=$DEVELOP"
 640     echo "DEBUG_INSTALL=$DEBUG_INSTALL"
 641     echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
 642     echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
 643     echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
 644     echo "DOCKER_USER=$DOCKER_USER"
 645     echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
 646     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 647     echo "INSTALL_JUJU=$INSTALL_JUJU"
 648     echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
 649     echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
 650     echo "INSTALL_LXD=$INSTALL_LXD"
 651     echo "INSTALL_NGSA=$INSTALL_NGSA"
 652     echo "INSTALL_DOCKER=$INSTALL_DOCKER"
 653     echo "INSTALL_ONLY=$INSTALL_ONLY"
 654     echo "INSTALL_PLA=$INSTALL_PLA"
 655     echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
 656     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 657     echo "NO_HOST_PORTS=$NO_HOST_PORTS"
 658     echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
 659     echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
 660     echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
 661     echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
 662     echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
 663     echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
 664     echo "OSM_DEVOPS=$OSM_DEVOPS"
 665     echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
 666     echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
 667     echo "OSM_NAMESPACE=$OSM_NAMESPACE"
 668     echo "OSM_VCA_HOST=$OSM_VCA_HOST"
 669     echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
 670     echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
 671     echo "OSM_WORK_DIR=$OSM_WORK_DIR"
 672     echo "PULL_IMAGES=$PULL_IMAGES"
 673     echo "RECONFIGURE=$RECONFIGURE"
 674     echo "RELEASE=$RELEASE"
 675     echo "REPOSITORY=$REPOSITORY"
 676     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 677     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 678     echo "SHOWOPTS=$SHOWOPTS"
 679     echo "TEST_INSTALLER=$TEST_INSTALLER"
 680     echo "TO_REBUILD=$TO_REBUILD"
 681     echo "UNINSTALL=$UNINSTALL"
 682     echo "UPDATE=$UPDATE"
 683     echo "Install from specific refspec (-b): $COMMIT_ID"
 684     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 685 }
 686
 687 function parse_docker_registry_url() {
 688     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 689     DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}')
 690     DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}')
 691     DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}')
 692     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 693 }
 694
 695 function ctrl_c() {
 696     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 697     echo "** Trapped CTRL-C"
 698     FATAL "User stopped the installation"
 699     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 700 }
 701
 702 UNINSTALL=""
 703 DEVELOP=""
 704 UPDATE=""
 705 RECONFIGURE=""
 706 TEST_INSTALLER=""
 707 INSTALL_LXD=""
 708 SHOWOPTS=""
 709 COMMIT_ID=""
 710 ASSUME_YES=""
 711 APT_PROXY_URL=""
 712 K8S_CLUSTER_ENGINE="kubeadm"
 713 INSTALL_FROM_SOURCE=""
 714 DEBUG_INSTALL=""
 715 RELEASE="ReleaseTEN"
 716 REPOSITORY="stable"
 717 INSTALL_K8S_MONITOR=""
 718 INSTALL_NGSA="y"
 719 INSTALL_PLA=""
 720 INSTALL_VIMEMU=""
 721 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 722 LXD_REPOSITORY_PATH=""
 723 INSTALL_LIGHTWEIGHT="y"
 724 INSTALL_TO_OPENSTACK=""
 725 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
 726 OPENSTACK_PUBLIC_NET_NAME=""
 727 OPENSTACK_ATTACH_VOLUME="false"
 728 OPENSTACK_SSH_KEY_FILE=""
 729 OPENSTACK_USERDATA_FILE=""
 730 OPENSTACK_VM_NAME="server-osm"
 731 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
 732 INSTALL_ONLY=""
 733 TO_REBUILD=""
 734 INSTALL_DOCKER=""
 735 INSTALL_JUJU=""
 736 INSTALL_NOHOSTCLIENT=""
 737 INSTALL_CACHELXDIMAGES=""
 738 OSM_DEVOPS=
 739 OSM_VCA_HOST=
 740 OSM_VCA_SECRET=
 741 OSM_VCA_PUBKEY=
 742 OSM_VCA_CLOUDNAME="localhost"
 743 OSM_VCA_K8S_CLOUDNAME="k8scloud"
 744 OSM_NAMESPACE=osm
 745 NO_HOST_PORTS=""
 746 DOCKER_NOBUILD=""
 747 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 748 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
 749 OSM_WORK_DIR="/etc/osm"
 750 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
 751 OSM_HOST_VOL="/var/lib/osm"
 752 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
 753 OSM_DOCKER_TAG="testing-daily"
 754 DOCKER_USER=opensourcemano
 755 PULL_IMAGES="y"
 756 KAFKA_TAG=2.11-1.0.2
 757 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
 758 PROMETHEUS_TAG=v2.28.1
 759 GRAFANA_TAG=8.1.1
 760 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
 761 PROMETHEUS_CADVISOR_TAG=latest
 762 KEYSTONEDB_TAG=10
 763 OSM_DATABASE_COMMONKEY=
 764 ELASTIC_VERSION=6.4.2
 765 ELASTIC_CURATOR_VERSION=5.5.4
 766 POD_NETWORK_CIDR=10.244.0.0/16
 767 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
 768 RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$'
 769 DOCKER_REGISTRY_URL=
 770 DOCKER_PROXY_URL=
 771 MODULE_DOCKER_TAG=
 772 OSM_INSTALLATION_TYPE="Default"
 773
 774 while getopts ":a:b:c:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
 775     case "${o}" in
 776         a)
 777             APT_PROXY_URL=${OPTARG}
 778             ;;
 779         b)
 780             COMMIT_ID=${OPTARG}
 781             PULL_IMAGES=""
 782             ;;
 783         c)
 784             K8S_CLUSTER_ENGINE=${OPTARG}
 785             [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ] && continue
 786             [ "${K8S_CLUSTER_ENGINE}" == "k3s" ] && continue
 787             [ "${K8S_CLUSTER_ENGINE}" == "microk8s" ] && continue
 788             echo -e "Invalid argument for -c : ' ${K8S_CLUSTER_ENGINE}'\n" >&2
 789             usage && exit 1
 790             ;;
 791         r)
 792             REPOSITORY="${OPTARG}"
 793             REPO_ARGS+=(-r "$REPOSITORY")
 794             ;;
 795         k)
 796             REPOSITORY_KEY="${OPTARG}"
 797             REPO_ARGS+=(-k "$REPOSITORY_KEY")
 798             ;;
 799         u)
 800             REPOSITORY_BASE="${OPTARG}"
 801             REPO_ARGS+=(-u "$REPOSITORY_BASE")
 802             ;;
 803         R)
 804             RELEASE="${OPTARG}"
 805             REPO_ARGS+=(-R "$RELEASE")
 806             ;;
 807         D)
 808             OSM_DEVOPS="${OPTARG}"
 809             ;;
 810         o)
 811             INSTALL_ONLY="y"
 812             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 813             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 814             ;;
 815         O)
 816             INSTALL_TO_OPENSTACK="y"
 817             if [ -n "${OPTARG}" ]; then
 818                 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
 819             else
 820                 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
 821                 usage && exit 1
 822             fi
 823             ;;
 824         f)
 825             OPENSTACK_SSH_KEY_FILE="${OPTARG}"
 826             ;;
 827         F)
 828             OPENSTACK_USERDATA_FILE="${OPTARG}"
 829             ;;
 830         N)
 831             OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
 832             ;;
 833         m)
 834             [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
 835             [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
 836             [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
 837             [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
 838             [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
 839             [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
 840             [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
 841             [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
 842             [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
 843             [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
 844             [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
 845             [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
 846             [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
 847             [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
 848             [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
 849             ;;
 850         H)
 851             OSM_VCA_HOST="${OPTARG}"
 852             ;;
 853         S)
 854             OSM_VCA_SECRET="${OPTARG}"
 855             ;;
 856         s)
 857             OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
 858             ;;
 859         t)
 860             OSM_DOCKER_TAG="${OPTARG}"
 861             REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
 862             ;;
 863         U)
 864             DOCKER_USER="${OPTARG}"
 865             ;;
 866         P)
 867             OSM_VCA_PUBKEY=$(cat ${OPTARG})
 868             ;;
 869         A)
 870             OSM_VCA_APIPROXY="${OPTARG}"
 871             ;;
 872         l)
 873             LXD_CLOUD_FILE="${OPTARG}"
 874             ;;
 875         L)
 876             LXD_CRED_FILE="${OPTARG}"
 877             ;;
 878         K)
 879             CONTROLLER_NAME="${OPTARG}"
 880             ;;
 881         d)
 882             DOCKER_REGISTRY_URL="${OPTARG}"
 883             ;;
 884         p)
 885             DOCKER_PROXY_URL="${OPTARG}"
 886             ;;
 887         T)
 888             MODULE_DOCKER_TAG="${OPTARG}"
 889             ;;
 890         -)
 891             [ "${OPTARG}" == "help" ] && usage && exit 0
 892             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
 893             [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
 894             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 895             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 896             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 897             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 898             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 899             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 900             [ "${OPTARG}" == "lxd" ] && INSTALL_LXD="y" && continue
 901             [ "${OPTARG}" == "nolxd" ] && INSTALL_LXD="" && continue
 902             [ "${OPTARG}" == "docker" ] && INSTALL_DOCKER="y" && continue
 903             [ "${OPTARG}" == "nodocker" ] && INSTALL_DOCKER="" && continue
 904             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 905             [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
 906             [ "${OPTARG}" == "juju" ] && INSTALL_JUJU="y" && continue
 907             [ "${OPTARG}" == "nojuju" ] && INSTALL_JUJU="" && continue
 908             [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
 909             [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
 910             [ "${OPTARG}" == "pullimages" ] && continue
 911             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 912             [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
 913             [ "${OPTARG}" == "bundle" ] && continue
 914             [ "${OPTARG}" == "k8s" ] && continue
 915             [ "${OPTARG}" == "lxd-cred" ] && continue
 916             [ "${OPTARG}" == "microstack" ] && continue
 917             [ "${OPTARG}" == "overlay" ] && continue
 918             [ "${OPTARG}" == "only-vca" ] && continue
 919             [ "${OPTARG}" == "small-profile" ] && continue
 920             [ "${OPTARG}" == "vca" ] && continue
 921             [ "${OPTARG}" == "ha" ] && continue
 922             [ "${OPTARG}" == "tag" ] && continue
 923             [ "${OPTARG}" == "registry" ] && continue
 924             [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
 925             [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
 926             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 927             [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
 928             [ "${OPTARG}" == "nocachelxdimages" ] && continue
 929             [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
 930             echo -e "Invalid option: '--$OPTARG'\n" >&2
 931             usage && exit 1
 932             ;;
 933         :)
 934             echo "Option -$OPTARG requires an argument" >&2
 935             usage && exit 1
 936             ;;
 937         \?)
 938             echo -e "Invalid option: '-$OPTARG'\n" >&2
 939             usage && exit 1
 940             ;;
 941         h)
 942             usage && exit 0
 943             ;;
 944         y)
 945             ASSUME_YES="y"
 946             ;;
 947         *)
 948             usage && exit 1
 949             ;;
 950     esac
 951 done
 952
 953 source $OSM_DEVOPS/common/all_funcs
 954
 955 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
 956 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
 957
 958 # Uninstall if "--uninstall"
 959 if [ -n "$UNINSTALL" ]; then
 960     if [ -n "$CHARMED" ]; then
 961         ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
 962         FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
 963     else
 964         ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
 965         FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
 966     fi
 967     echo -e "\nDONE"
 968     exit 0
 969 fi
 970
 971 # Installation starts here
 972
 973 # Get README and create OSM_TRACK_INSTALLATION_ID
 974 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README.txt &> /dev/null
 975 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
 976
 977 # Get OS info to be tracked
 978 os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}')
 979 echo $os_distro
 980 os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}')
 981 echo $os_release
 982 os_info="${os_distro}_${os_release}"
 983 os_info="${os_info// /_}"
 984
 985 if [ -n "$CHARMED" ]; then
 986     # Charmed installation
 987     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 988     ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
 989     FATAL_TRACK charmed_install "charmed_install.sh failed"
 990     wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
 991     echo -e "\nDONE"
 992     exit 0
 993 elif [ -n "$INSTALL_TO_OPENSTACK" ]; then
 994     # Installation to Openstack
 995     install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
 996     echo -e "\nDONE"
 997     exit 0
 998 else
 999     # Community_installer
1000     # Check incompatible options
1001     [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
1002     [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
1003     # Special cases go first
1004     # if develop, we force master
1005     [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
1006     [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
1007     [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
1008     [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
1009     # This is where installation starts
1010     install_osm
1011     echo -e "\nDONE"
1012     exit 0
1013 fi