installers/full_install_osm.sh

   1 #!/bin/bash
   2 #
   3 #   Licensed under the Apache License, Version 2.0 (the "License");
   4 #   you may not use this file except in compliance with the License.
   5 #   You may obtain a copy of the License at
   6 #
   7 #       http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #   Unless required by applicable law or agreed to in writing, software
  10 #   distributed under the License is distributed on an "AS IS" BASIS,
  11 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #   See the License for the specific language governing permissions and
  13 #   limitations under the License.
  14 #
  15
  16 function usage(){
  17     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  18     echo -e "usage: $0 [OPTIONS]"
  19     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  20     echo -e "  OPTIONS"
  21     echo -e "     -h / --help:    print this help"
  22     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  23     echo -e "     -r <repo>:      use specified repository name for osm packages"
  24     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  25     echo -e "     -u <repo base>: use specified repository url for osm packages"
  26     echo -e "     -k <repo key>:  use specified repository public key url"
  27     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  28     echo -e "                     -b master          (main dev branch)"
  29     echo -e "                     -b v2.0            (v2.0 branch)"
  30     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  31     echo -e "                     ..."
  32     echo -e "     -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
  33     echo -e "     -s <namespace>  namespace when installed using k8s, default is osm"
  34     echo -e "     -H <VCA host>   use specific juju host controller IP"
  35     echo -e "     -S <VCA secret> use VCA/juju secret key"
  36     echo -e "     -P <VCA pubkey> use VCA/juju public key file"
  37     echo -e "     -A <VCA apiproxy> use VCA/juju API proxy"
  38     echo -e "     --pla:          install the PLA module for placement support"
  39     echo -e "     --old-sa:       install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
  40     echo -e "     --ng-sa:        install new Service Assurance framework (Airflow, AlertManager and Pushgateway)  (enabled by default)"
  41     echo -e "     -m <MODULE>:    install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
  42     echo -e "     -o <ADDON>:     ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
  43     echo -e "     -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
  44     echo -e "     -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
  45     echo -e "     -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
  46     echo -e "     -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
  47     echo -e "     -D <devops path> use local devops installation path"
  48     echo -e "     -w <work dir>   Location to store runtime installation"
  49     echo -e "     -t <docker tag> specify osm docker tag (default is latest)"
  50     echo -e "     -l:             LXD cloud yaml file"
  51     echo -e "     -L:             LXD credentials yaml file"
  52     echo -e "     -K:             Specifies the name of the controller to use - The controller must be already bootstrapped"
  53     echo -e "     -d <docker registry URL> use docker registry URL instead of dockerhub"
  54     echo -e "     -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
  55     echo -e "     -T <docker tag> specify docker tag for the modules specified with option -m"
  56     echo -e "     --debug:        debug mode"
  57     echo -e "     --nocachelxdimages:  do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
  58     echo -e "     --cachelxdimages:  cache local lxd images, create cronjob for that cache (will make installation longer)"
  59     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  60     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  61     echo -e "     --nojuju:       do not juju, assumes already installed"
  62     echo -e "     --nodockerbuild:do not build docker images (use existing locally cached images)"
  63     echo -e "     --nohostports:  do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
  64     echo -e "     --nohostclient: do not install the osmclient"
  65     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  66     echo -e "     --source:       install OSM from source code using the latest stable tag"
  67     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  68     echo -e "     --pullimages:   pull/run osm images from docker.io/opensourcemano"
  69     echo -e "     --k8s_monitor:  install the OSM kubernetes monitoring with prometheus and grafana"
  70     echo -e "     --volume:       create a VM volume when installing to OpenStack"
  71     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  72     echo -e "     --charmed:                   Deploy and operate OSM with Charms on k8s"
  73     echo -e "     [--bundle <bundle path>]:    Specify with which bundle to deploy OSM with charms (--charmed option)"
  74     echo -e "     [--k8s <kubeconfig path>]:   Specify with which kubernetes to deploy OSM with charms (--charmed option)"
  75     echo -e "     [--vca <name>]:              Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
  76     echo -e "     [--small-profile]:           Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
  77     echo -e "     [--lxd <yaml path>]:         Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
  78     echo -e "     [--lxd-cred <yaml path>]:    Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
  79     echo -e "     [--microstack]:              Installs microstack as a vim. (--charmed option)"
  80     echo -e "     [--overlay]:                 Add an overlay to override some defaults of the default bundle (--charmed option)"
  81     echo -e "     [--ha]:                      Installs High Availability bundle. (--charmed option)"
  82     echo -e "     [--tag]:                     Docker image tag. (--charmed option)"
  83     echo -e "     [--registry]:                Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
  84     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
  85 }
  86
  87 # takes a juju/accounts.yaml file and returns the password specific
  88 # for a controller. I wrote this using only bash tools to minimize
  89 # additions of other packages
  90 function parse_juju_password {
  91     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  92     password_file="${HOME}/.local/share/juju/accounts.yaml"
  93     local controller_name=$1
  94     local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034')
  95     sed -ne "s|^\($s\):|\1|" \
  96          -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
  97          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
  98     awk -F$fs -v controller=$controller_name '{
  99         indent = length($1)/2;
 100         vname[indent] = $2;
 101         for (i in vname) {if (i > indent) {delete vname[i]}}
 102         if (length($3) > 0) {
 103             vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
 104             if (match(vn,controller) && match($2,"password")) {
 105                 printf("%s",$3);
 106             }
 107         }
 108     }'
 109     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 110 }
 111
 112 function set_vca_variables() {
 113     OSM_VCA_CLOUDNAME="lxd-cloud"
 114     [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
 115     if [ -z "$OSM_VCA_HOST" ]; then
 116         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 117         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 118         [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 119     fi
 120     if [ -z "$OSM_VCA_SECRET" ]; then
 121         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
 122         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
 123         [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 124     fi
 125     if [ -z "$OSM_VCA_PUBKEY" ]; then
 126         OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub)
 127         [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
 128     fi
 129     if [ -z "$OSM_VCA_CACERT" ]; then
 130         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 131         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 132         [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
 133     fi
 134 }
 135
 136 function generate_secret() {
 137     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 138     head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32
 139     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 140 }
 141
 142 function check_packages() {
 143     NEEDED_PACKAGES="$1"
 144     echo -e "Checking required packages: ${NEEDED_PACKAGES}"
 145     for PACKAGE in ${NEEDED_PACKAGES} ; do
 146         dpkg -L ${PACKAGE}
 147         if [ $? -ne 0 ]; then
 148             echo -e "Package ${PACKAGE} is not installed."
 149             echo -e "Updating apt-cache ..."
 150             sudo apt-get update
 151             echo -e "Installing ${PACKAGE} ..."
 152             sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
 153         fi
 154     done
 155     echo -e "Required packages are present: ${NEEDED_PACKAGES}"
 156 }
 157
 158 function ask_user(){
 159     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 160     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 161     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 162     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 163     read -e -p "$1" USER_CONFIRMATION
 164     while true ; do
 165         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 166         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 167         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 168         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 169         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 170     done
 171     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 172 }
 173
 174 function install_osmclient(){
 175     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 176     CLIENT_RELEASE=${RELEASE#"-R "}
 177     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 178     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 179     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 180     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 181     curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
 182     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
 183     sudo apt-get -y update
 184     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip
 185     sudo -H LC_ALL=C python3 -m pip install -U pip
 186     sudo -H LC_ALL=C python3 -m pip install -U python-magic pyangbind verboselogs
 187     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient
 188     if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
 189         python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
 190     fi
 191     if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
 192         sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libssl-dev libmagic1
 193         python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
 194     fi
 195     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 196     [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 197     echo -e "\nOSM client installed"
 198     if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
 199         echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 200         echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 201         echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 202     else
 203         echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
 204         echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
 205         echo "     export OSM_HOSTNAME=<OSM_host>"
 206     fi
 207     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 208     return 0
 209 }
 210
 211 function docker_login() {
 212     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 213     echo "Docker login"
 214     [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}"
 215     sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
 216     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 217 }
 218
 219 function pull_docker_images() {
 220     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 221     echo "Pulling docker images"
 222     [ -n "${DOCKER_REGISTRY_URL}" ] && docker_login
 223
 224     echo "Pulling non-OSM docker images"
 225     sg docker -c "docker pull wurstmeister/zookeeper" || FATAL "cannot get zookeeper docker image"
 226     sg docker -c "docker pull wurstmeister/kafka:${KAFKA_TAG}" || FATAL "cannot get kafka docker image"
 227     sg docker -c "docker pull prom/prometheus:${PROMETHEUS_TAG}" || FATAL "cannot get prometheus docker image"
 228     sg docker -c "docker pull google/cadvisor:${PROMETHEUS_CADVISOR_TAG}" || FATAL "cannot get prometheus cadvisor docker image"
 229     sg docker -c "docker pull grafana/grafana:${GRAFANA_TAG}" || FATAL "cannot get grafana docker image"
 230     sg docker -c "docker pull kiwigrid/k8s-sidecar:${KIWIGRID_K8S_SIDECAR_TAG}" || FATAL "cannot get kiwigrid k8s-sidecar docker image"
 231     sg docker -c "docker pull mariadb:${KEYSTONEDB_TAG}" || FATAL "cannot get keystone-db docker image"
 232     sg docker -c "docker pull mysql:5" || FATAL "cannot get mysql docker image"
 233
 234     list_of_modules="MON NBI KEYSTONE RO LCM NG-UI osmclient prometheus"
 235     if [ -n "$INSTALL_NGSA" ]; then
 236         list_of_modules="${list_of_modules} Airflow Webhook"
 237     else
 238         list_of_modules="${list_of_modules} POL"
 239     fi
 240     if [ -n "$INSTALL_PLA" ]; then
 241         list_of_modules="${list_of_modules} PLA"
 242     fi
 243     echo "Pulling OSM docker images for the following modules: ${list_of_modules}"
 244     for module in ${list_of_modules}; do
 245         module_lower=${module,,}
 246         module_tag="${OSM_DOCKER_TAG}"
 247         if [ -n "${MODULE_DOCKER_TAG}" ] && echo $TO_REBUILD | grep -q $module ; then
 248             module_tag="${MODULE_DOCKER_TAG}"
 249         fi
 250         echo "Pulling ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag} docker image"
 251         sg docker -c "docker pull ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag}" || FATAL "cannot pull $module docker image"
 252     done
 253
 254     echo "Finished pulling docker images"
 255     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 256 }
 257
 258 function generate_docker_images() {
 259     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 260     echo "Generating docker images"
 261     _build_from=$COMMIT_ID
 262     [ -z "$_build_from" ] && _build_from="latest"
 263     echo "OSM Docker images generated from $_build_from"
 264     LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
 265     trap 'rm -rf "${LWTEMPDIR}"' EXIT
 266     for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do
 267         if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then
 268             module_lower=${module,,}
 269             if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
 270                 continue
 271             fi
 272             git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module
 273             git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
 274             sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
 275         fi
 276     done
 277     if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then
 278         BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY")
 279         BUILD_ARGS+=(--build-arg RELEASE="$RELEASE")
 280         BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY")
 281         BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE")
 282         sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
 283     fi
 284     echo "Finished generation of docker images"
 285     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 286 }
 287
 288 function cmp_overwrite() {
 289     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 290     file1="$1"
 291     file2="$2"
 292     if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then
 293         if [ -f "${file2}" ]; then
 294             ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
 295         else
 296             cp -b ${file1} ${file2}
 297         fi
 298     fi
 299     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 300 }
 301
 302 #deploys osm pods and services
 303 function deploy_osm_services() {
 304     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 305     # helm is already installed as part of install_kubeadm_cluster.sh
 306
 307     # Generate helm values to be passed with -f osm-values.yaml
 308     sudo mkdir -p ${OSM_HELM_WORK_DIR}
 309     sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
 310 vca:
 311   pubkey: \"${OSM_VCA_PUBKEY}\"
 312 EOF"
 313
 314     # Generate helm values to be passed with --set
 315     OSM_HELM_OPTS=""
 316     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
 317     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
 318     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}"
 319     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
 320     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
 321     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
 322     [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
 323     [ ! "$OSM_DOCKER_TAG" == "13" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag=${OSM_DOCKER_TAG}"
 324     [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
 325     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 326         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true"
 327         [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=${HTTP_PROXY}"
 328         [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=${HTTPS_PROXY}"
 329         [ -n "${NO_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=${NO_PROXY}"
 330     fi
 331
 332     echo "helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
 333     helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}
 334
 335     # Override existing values.yaml with the final values.yaml used to install OSM
 336     helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
 337     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 338 }
 339
 340 #deploy charmed services
 341 function deploy_charmed_services() {
 342     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 343     juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
 344     juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE
 345     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 346 }
 347
 348 function install_osm_ngsa_service() {
 349     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 350     NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 351     [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
 352     $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
 353     FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
 354     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 355 }
 356
 357 function add_local_k8scluster() {
 358     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 359     /usr/bin/osm --all-projects vim-create \
 360       --name _system-osm-vim \
 361       --account_type dummy \
 362       --auth_url http://dummy \
 363       --user osm --password osm --tenant osm \
 364       --description "dummy" \
 365       --config '{management_network_name: mgmt}'
 366     /usr/bin/osm --all-projects k8scluster-add \
 367       --creds ${HOME}/.kube/config \
 368       --vim _system-osm-vim \
 369       --k8s-nets '{"net1": null}' \
 370       --version '1.15' \
 371       --description "OSM Internal Cluster" \
 372       _system-osm-k8s
 373     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 374 }
 375
 376 function configure_apt_proxy() {
 377     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 378     OSM_APT_PROXY=$1
 379     OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt"
 380     echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}"
 381     if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
 382         sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
 383 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
 384 EOF"
 385     else
 386         sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE}
 387     fi
 388     sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}"
 389     track prereq apt_proxy_configured_ok
 390     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 391 }
 392
 393 function ask_proceed() {
 394     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 395
 396     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
 397     1. Install and configure LXD
 398     2. Install juju
 399     3. Install docker CE
 400     4. Disable swap space
 401     5. Install and initialize Kubernetes
 402     as pre-requirements.
 403     Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 404
 405     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 406 }
 407
 408 function check_osm_behind_proxy() {
 409     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 410
 411     export OSM_BEHIND_PROXY=""
 412     export OSM_PROXY_ENV_VARIABLES=""
 413     [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
 414     [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
 415     [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
 416     [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
 417     [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
 418     [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
 419
 420     echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
 421     echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
 422
 423     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 424         [ -z "$ASSUME_YES" ] && ! ask_user "
 425 The following env variables have been found for the current user:
 426 ${OSM_PROXY_ENV_VARIABLES}.
 427
 428 This suggests that this machine is behind a proxy and a special configuration is required.
 429 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
 430 env variables.
 431
 432 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
 433 Depending on the program, the env variables to work behind a proxy might be different
 434 (e.g. http_proxy vs HTTP_PROXY).
 435
 436 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
 437 and HTTPS_PROXY are defined.
 438
 439 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
 440 those env variables are also set for root user. If you are not sure whether those variables
 441 are configured for the root user, you can stop the installation now.
 442
 443 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
 444     else
 445         echo "This machine is not behind a proxy"
 446     fi
 447
 448     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 449 }
 450
 451 function find_devops_folder() {
 452     if [ -z "$OSM_DEVOPS" ]; then
 453         if [ -n "$TEST_INSTALLER" ]; then
 454             echo -e "\nUsing local devops repo for OSM installation"
 455             OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
 456         else
 457             echo -e "\nCreating temporary dir for OSM installation"
 458             OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 459             trap 'rm -rf "$OSM_DEVOPS"' EXIT
 460             git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
 461         fi
 462     fi
 463 }
 464
 465 function install_osm() {
 466     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 467
 468     trap ctrl_c INT
 469
 470
 471     check_osm_behind_proxy
 472     check_packages "git wget curl tar snapd"
 473     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 474     find_devops_folder
 475
 476     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
 477
 478     track checks checkingroot_ok
 479     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 480     track checks noroot_ok
 481     ask_proceed
 482     track checks proceed_ok
 483
 484     echo "Installing OSM"
 485
 486     [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
 487
 488     echo "Determining IP address of the interface with the default route"
 489     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
 490     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
 491     [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 492     OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
 493     [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 494
 495     # configure apt proxy
 496     [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
 497
 498     # if no host is passed in, we need to install lxd, unless explicilty asked not to
 499     if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then
 500         LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
 501         [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
 502         $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
 503     fi
 504
 505     track prereq prereqok_ok
 506
 507     if [ ! -n "$INSTALL_NODOCKER" ]; then
 508         DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 509         [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
 510         [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
 511         $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
 512     fi
 513
 514     track docker_ce docker_ce_ok
 515
 516     echo "Creating folders for installation"
 517     [ ! -d "$OSM_WORK_DIR" ] && sudo mkdir -p $OSM_WORK_DIR
 518     sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_WORK_DIR/kubeadm-config.yaml
 519
 520     $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
 521     FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
 522     track k8scluster k8scluster_ok
 523
 524     JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
 525     [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
 526     [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
 527     [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
 528     [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
 529     [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
 530     $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
 531     set_vca_variables
 532     track juju juju_ok
 533
 534     # Deploy OSM services
 535     [ -z "$DOCKER_NOBUILD" ] && pull_docker_images
 536     [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
 537     track docker_images docker_images_ok
 538
 539     deploy_charmed_services
 540     track deploy_osm deploy_mongodb_ok
 541     deploy_osm_services
 542     track deploy_osm deploy_osm_services_k8s_ok
 543     if [ -n "$INSTALL_K8S_MONITOR" ]; then
 544         # install OSM MONITORING
 545         install_k8s_monitoring
 546         track deploy_osm install_k8s_monitoring_ok
 547     fi
 548     if [ -n "$INSTALL_NGSA" ]; then
 549         # optional NGSA install
 550         install_osm_ngsa_service
 551         track deploy_osm install_osm_ngsa_ok
 552     fi
 553
 554     [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
 555     track osmclient osmclient_ok
 556
 557     echo -e "Checking OSM health state..."
 558     $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
 559     (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
 560     echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
 561     track healthchecks osm_unhealthy didnotconverge)
 562     track healthchecks after_healthcheck_ok
 563
 564     add_local_k8scluster
 565     track final_ops add_local_k8scluster_ok
 566
 567     arrange_docker_default_network_policy
 568
 569     wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
 570     track end
 571     sudo find /etc/osm
 572     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 573     return 0
 574 }
 575
 576 function install_to_openstack() {
 577     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 578
 579     if [ -z "$2" ]; then
 580         FATAL "OpenStack installer requires a valid external network name"
 581     fi
 582
 583     # Install Pip for Python3
 584     sudo apt install -y python3-pip python3-venv
 585     sudo -H LC_ALL=C python3 -m pip install -U pip
 586
 587     # Create a venv to avoid conflicts with the host installation
 588     python3 -m venv $OPENSTACK_PYTHON_VENV
 589
 590     source $OPENSTACK_PYTHON_VENV/bin/activate
 591
 592     # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
 593     python -m pip install -U wheel
 594     python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
 595
 596     # Install the Openstack cloud module (ansible>=2.10)
 597     ansible-galaxy collection install openstack.cloud
 598
 599     export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
 600
 601     OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
 602
 603     ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
 604
 605     if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
 606         ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
 607     fi
 608
 609     if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
 610         ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
 611     fi
 612
 613     # Execute the Ansible playbook based on openrc or clouds.yaml
 614     if [ -e "$1" ]; then
 615         . $1
 616         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 617         $OSM_DEVOPS/installers/openstack/site.yml
 618     else
 619         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 620         -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
 621     fi
 622
 623     # Exit from venv
 624     deactivate
 625
 626     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 627     return 0
 628 }
 629
 630 function arrange_docker_default_network_policy() {
 631     echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
 632     sudo iptables -I DOCKER-USER -j ACCEPT
 633     sudo iptables-save | sudo tee /etc/iptables/rules.v4
 634     sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
 635 }
 636
 637 function install_k8s_monitoring() {
 638     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 639     # install OSM monitoring
 640     sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
 641     sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
 642     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 643 }
 644
 645 function dump_vars(){
 646     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 647     echo "APT_PROXY_URL=$APT_PROXY_URL"
 648     echo "DEVELOP=$DEVELOP"
 649     echo "DEBUG_INSTALL=$DEBUG_INSTALL"
 650     echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
 651     echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
 652     echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
 653     echo "DOCKER_USER=$DOCKER_USER"
 654     echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
 655     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 656     echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
 657     echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
 658     echo "INSTALL_LXD=$INSTALL_LXD"
 659     echo "INSTALL_NGSA=$INSTALL_NGSA"
 660     echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
 661     echo "INSTALL_NOJUJU=$INSTALL_NOJUJU"
 662     echo "INSTALL_NOLXD=$INSTALL_NOLXD"
 663     echo "INSTALL_ONLY=$INSTALL_ONLY"
 664     echo "INSTALL_PLA=$INSTALL_PLA"
 665     echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
 666     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 667     echo "NO_HOST_PORTS=$NO_HOST_PORTS"
 668     echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
 669     echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
 670     echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
 671     echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
 672     echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
 673     echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
 674     echo "OSM_DEVOPS=$OSM_DEVOPS"
 675     echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
 676     echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
 677     echo "OSM_NAMESPACE=$OSM_NAMESPACE"
 678     echo "OSM_VCA_HOST=$OSM_VCA_HOST"
 679     echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
 680     echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
 681     echo "OSM_WORK_DIR=$OSM_WORK_DIR"
 682     echo "PULL_IMAGES=$PULL_IMAGES"
 683     echo "RECONFIGURE=$RECONFIGURE"
 684     echo "RELEASE=$RELEASE"
 685     echo "REPOSITORY=$REPOSITORY"
 686     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 687     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 688     echo "SHOWOPTS=$SHOWOPTS"
 689     echo "TEST_INSTALLER=$TEST_INSTALLER"
 690     echo "TO_REBUILD=$TO_REBUILD"
 691     echo "UNINSTALL=$UNINSTALL"
 692     echo "UPDATE=$UPDATE"
 693     echo "Install from specific refspec (-b): $COMMIT_ID"
 694     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 695 }
 696
 697 function parse_docker_registry_url() {
 698     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 699     DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}')
 700     DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}')
 701     DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}')
 702     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 703 }
 704
 705 function ctrl_c() {
 706     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 707     echo "** Trapped CTRL-C"
 708     FATAL "User stopped the installation"
 709     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 710 }
 711
 712 UNINSTALL=""
 713 DEVELOP=""
 714 UPDATE=""
 715 RECONFIGURE=""
 716 TEST_INSTALLER=""
 717 INSTALL_LXD=""
 718 SHOWOPTS=""
 719 COMMIT_ID=""
 720 ASSUME_YES=""
 721 APT_PROXY_URL=""
 722 INSTALL_FROM_SOURCE=""
 723 DEBUG_INSTALL=""
 724 RELEASE="ReleaseTEN"
 725 REPOSITORY="stable"
 726 INSTALL_K8S_MONITOR=""
 727 INSTALL_NGSA="y"
 728 INSTALL_PLA=""
 729 INSTALL_VIMEMU=""
 730 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 731 LXD_REPOSITORY_PATH=""
 732 INSTALL_LIGHTWEIGHT="y"
 733 INSTALL_TO_OPENSTACK=""
 734 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
 735 OPENSTACK_PUBLIC_NET_NAME=""
 736 OPENSTACK_ATTACH_VOLUME="false"
 737 OPENSTACK_SSH_KEY_FILE=""
 738 OPENSTACK_USERDATA_FILE=""
 739 OPENSTACK_VM_NAME="server-osm"
 740 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
 741 INSTALL_ONLY=""
 742 TO_REBUILD=""
 743 INSTALL_NOLXD=""
 744 INSTALL_NODOCKER=""
 745 INSTALL_NOJUJU=""
 746 INSTALL_NOHOSTCLIENT=""
 747 INSTALL_CACHELXDIMAGES=""
 748 OSM_DEVOPS=
 749 OSM_VCA_HOST=
 750 OSM_VCA_SECRET=
 751 OSM_VCA_PUBKEY=
 752 OSM_VCA_CLOUDNAME="localhost"
 753 OSM_VCA_K8S_CLOUDNAME="k8scloud"
 754 OSM_NAMESPACE=osm
 755 NO_HOST_PORTS=""
 756 DOCKER_NOBUILD=""
 757 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 758 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
 759 OSM_WORK_DIR="/etc/osm"
 760 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
 761 OSM_HOST_VOL="/var/lib/osm"
 762 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
 763 OSM_DOCKER_TAG=latest
 764 DOCKER_USER=opensourcemano
 765 PULL_IMAGES="y"
 766 KAFKA_TAG=2.11-1.0.2
 767 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
 768 PROMETHEUS_TAG=v2.28.1
 769 GRAFANA_TAG=8.1.1
 770 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
 771 PROMETHEUS_CADVISOR_TAG=latest
 772 KEYSTONEDB_TAG=10
 773 OSM_DATABASE_COMMONKEY=
 774 ELASTIC_VERSION=6.4.2
 775 ELASTIC_CURATOR_VERSION=5.5.4
 776 POD_NETWORK_CIDR=10.244.0.0/16
 777 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
 778 RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$'
 779 DOCKER_REGISTRY_URL=
 780 DOCKER_PROXY_URL=
 781 MODULE_DOCKER_TAG=
 782 OSM_INSTALLATION_TYPE="Default"
 783
 784 while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
 785     case "${o}" in
 786         a)
 787             APT_PROXY_URL=${OPTARG}
 788             ;;
 789         b)
 790             COMMIT_ID=${OPTARG}
 791             PULL_IMAGES=""
 792             ;;
 793         r)
 794             REPOSITORY="${OPTARG}"
 795             REPO_ARGS+=(-r "$REPOSITORY")
 796             ;;
 797         k)
 798             REPOSITORY_KEY="${OPTARG}"
 799             REPO_ARGS+=(-k "$REPOSITORY_KEY")
 800             ;;
 801         u)
 802             REPOSITORY_BASE="${OPTARG}"
 803             REPO_ARGS+=(-u "$REPOSITORY_BASE")
 804             ;;
 805         R)
 806             RELEASE="${OPTARG}"
 807             REPO_ARGS+=(-R "$RELEASE")
 808             ;;
 809         D)
 810             OSM_DEVOPS="${OPTARG}"
 811             ;;
 812         o)
 813             INSTALL_ONLY="y"
 814             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 815             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 816             ;;
 817         O)
 818             INSTALL_TO_OPENSTACK="y"
 819             if [ -n "${OPTARG}" ]; then
 820                 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
 821             else
 822                 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
 823                 usage && exit 1
 824             fi
 825             ;;
 826         f)
 827             OPENSTACK_SSH_KEY_FILE="${OPTARG}"
 828             ;;
 829         F)
 830             OPENSTACK_USERDATA_FILE="${OPTARG}"
 831             ;;
 832         N)
 833             OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
 834             ;;
 835         m)
 836             [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
 837             [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
 838             [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
 839             [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
 840             [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
 841             [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
 842             [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
 843             [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
 844             [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
 845             [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
 846             [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
 847             [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
 848             [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
 849             [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
 850             [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
 851             ;;
 852         H)
 853             OSM_VCA_HOST="${OPTARG}"
 854             ;;
 855         S)
 856             OSM_VCA_SECRET="${OPTARG}"
 857             ;;
 858         s)
 859             OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
 860             ;;
 861         t)
 862             OSM_DOCKER_TAG="${OPTARG}"
 863             REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
 864             ;;
 865         U)
 866             DOCKER_USER="${OPTARG}"
 867             ;;
 868         P)
 869             OSM_VCA_PUBKEY=$(cat ${OPTARG})
 870             ;;
 871         A)
 872             OSM_VCA_APIPROXY="${OPTARG}"
 873             ;;
 874         l)
 875             LXD_CLOUD_FILE="${OPTARG}"
 876             ;;
 877         L)
 878             LXD_CRED_FILE="${OPTARG}"
 879             ;;
 880         K)
 881             CONTROLLER_NAME="${OPTARG}"
 882             ;;
 883         d)
 884             DOCKER_REGISTRY_URL="${OPTARG}"
 885             ;;
 886         p)
 887             DOCKER_PROXY_URL="${OPTARG}"
 888             ;;
 889         T)
 890             MODULE_DOCKER_TAG="${OPTARG}"
 891             ;;
 892         -)
 893             [ "${OPTARG}" == "help" ] && usage && exit 0
 894             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
 895             [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
 896             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 897             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 898             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 899             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 900             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 901             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 902             [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
 903             [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
 904             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 905             [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
 906             [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue
 907             [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
 908             [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
 909             [ "${OPTARG}" == "pullimages" ] && continue
 910             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 911             [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
 912             [ "${OPTARG}" == "bundle" ] && continue
 913             [ "${OPTARG}" == "k8s" ] && continue
 914             [ "${OPTARG}" == "lxd" ] && continue
 915             [ "${OPTARG}" == "lxd-cred" ] && continue
 916             [ "${OPTARG}" == "microstack" ] && continue
 917             [ "${OPTARG}" == "overlay" ] && continue
 918             [ "${OPTARG}" == "only-vca" ] && continue
 919             [ "${OPTARG}" == "small-profile" ] && continue
 920             [ "${OPTARG}" == "vca" ] && continue
 921             [ "${OPTARG}" == "ha" ] && continue
 922             [ "${OPTARG}" == "tag" ] && continue
 923             [ "${OPTARG}" == "registry" ] && continue
 924             [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
 925             [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
 926             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 927             [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
 928             [ "${OPTARG}" == "nocachelxdimages" ] && continue
 929             [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
 930             echo -e "Invalid option: '--$OPTARG'\n" >&2
 931             usage && exit 1
 932             ;;
 933         :)
 934             echo "Option -$OPTARG requires an argument" >&2
 935             usage && exit 1
 936             ;;
 937         \?)
 938             echo -e "Invalid option: '-$OPTARG'\n" >&2
 939             usage && exit 1
 940             ;;
 941         h)
 942             usage && exit 0
 943             ;;
 944         y)
 945             ASSUME_YES="y"
 946             ;;
 947         *)
 948             usage && exit 1
 949             ;;
 950     esac
 951 done
 952
 953 source $OSM_DEVOPS/common/all_funcs
 954
 955 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
 956 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
 957
 958 # Uninstall if "--uninstall"
 959 if [ -n "$UNINSTALL" ]; then
 960     if [ -n "$CHARMED" ]; then
 961         ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
 962         FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
 963     else
 964         ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
 965         FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
 966     fi
 967     echo -e "\nDONE"
 968     exit 0
 969 fi
 970
 971 # Installation starts here
 972
 973 # Get README and create OSM_TRACK_INSTALLATION_ID
 974 wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README.txt &> /dev/null
 975 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
 976
 977 # Get OS info to be tracked
 978 os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}')
 979 echo $os_distro
 980 os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}')
 981 echo $os_release
 982 os_info="${os_distro}_${os_release}"
 983 os_info="${os_info// /_}"
 984
 985 # Charmed installation
 986 if [ -n "$CHARMED" ]; then
 987     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 988     ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
 989     FATAL_TRACK charmed_install "charmed_install.sh failed"
 990     wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
 991     echo -e "\nDONE"
 992     exit 0
 993 fi
 994
 995 # Installation to Openstack
 996 if [ -n "$INSTALL_TO_OPENSTACK" ]; then
 997     install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
 998     echo -e "\nDONE"
 999     exit 0
1000 fi
1001
1002 # Community_installer
1003 # Check incompatible options
1004 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
1005 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
1006 # Special cases go first
1007 # if develop, we force master
1008 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
1009 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
1010 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
1011 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
1012 # This is where installation starts
1013 install_osm
1014 echo -e "\nDONE"
1015 exit 0