3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at
7 # http://www.apache.org/licenses/LICENSE-2.0
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
17 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
18 echo -e "usage: $0 [OPTIONS]"
21 echo -e " -h / --help: print this help"
22 echo -e " -y: do not prompt for confirmation, assumes yes"
23 echo -e " -r <repo>: use specified repository name for osm packages"
24 echo -e " -R <release>: use specified release for osm binaries (deb packages, lxd images, ...)"
25 echo -e " -u <repo base>: use specified repository url for osm packages"
26 echo -e " -k <repo key>: use specified repository public key url"
27 echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag"
28 echo -e " -b master (main dev branch)"
29 echo -e " -b v2.0 (v2.0 branch)"
30 echo -e " -b tags/v1.1.0 (a specific tag)"
32 echo -e " -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
33 echo -e " -s <namespace> namespace when installed using k8s, default is osm"
34 echo -e " -H <VCA host> use specific juju host controller IP"
35 echo -e " -S <VCA secret> use VCA/juju secret key"
36 echo -e " -P <VCA pubkey> use VCA/juju public key file"
37 echo -e " -A <VCA apiproxy> use VCA/juju API proxy"
38 echo -e " --pla: install the PLA module for placement support"
39 echo -e " --old-sa: install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
40 echo -e " --ng-sa: install new Service Assurance framework (Airflow, AlertManager and Pushgateway) (enabled by default)"
41 echo -e " -m <MODULE>: install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
42 echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
43 echo -e " -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
44 echo -e " -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
45 echo -e " -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
46 echo -e " -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
47 echo -e " -D <devops path> use local devops installation path"
48 echo -e " -w <work dir> Location to store runtime installation"
49 echo -e " -t <docker tag> specify osm docker tag (default is latest)"
50 echo -e " -l: LXD cloud yaml file"
51 echo -e " -L: LXD credentials yaml file"
52 echo -e " -K: Specifies the name of the controller to use - The controller must be already bootstrapped"
53 echo -e " -d <docker registry URL> use docker registry URL instead of dockerhub"
54 echo -e " -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
55 echo -e " -T <docker tag> specify docker tag for the modules specified with option -m"
56 echo -e " --debug: debug mode"
57 echo -e " --nocachelxdimages: do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
58 echo -e " --cachelxdimages: cache local lxd images, create cronjob for that cache (will make installation longer)"
59 echo -e " --nolxd: do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
60 echo -e " --nodocker: do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
61 echo -e " --nojuju: do not juju, assumes already installed"
62 echo -e " --nodockerbuild:do not build docker images (use existing locally cached images)"
63 echo -e " --nohostports: do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
64 echo -e " --nohostclient: do not install the osmclient"
65 echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
66 echo -e " --source: install OSM from source code using the latest stable tag"
67 echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
68 echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano"
69 echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana"
70 echo -e " --volume: create a VM volume when installing to OpenStack"
71 echo -e " --showopts: print chosen options and exit (only for debugging)"
72 echo -e " --charmed: Deploy and operate OSM with Charms on k8s"
73 echo -e " [--bundle <bundle path>]: Specify with which bundle to deploy OSM with charms (--charmed option)"
74 echo -e " [--k8s <kubeconfig path>]: Specify with which kubernetes to deploy OSM with charms (--charmed option)"
75 echo -e " [--vca <name>]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
76 echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
77 echo -e " [--lxd <yaml path>]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
78 echo -e " [--lxd-cred <yaml path>]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
79 echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)"
80 echo -e " [--overlay]: Add an overlay to override some defaults of the default bundle (--charmed option)"
81 echo -e " [--ha]: Installs High Availability bundle. (--charmed option)"
82 echo -e " [--tag]: Docker image tag. (--charmed option)"
83 echo -e " [--registry]: Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
84 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
87 # takes a juju/accounts.yaml file and returns the password specific
88 # for a controller. I wrote this using only bash tools to minimize
89 # additions of other packages
90 function parse_juju_password
{
91 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
92 password_file
="${HOME}/.local/share/juju/accounts.yaml"
93 local controller_name
=$1
94 local s
='[[:space:]]*' w
='[a-zA-Z0-9_-]*' fs
=$
(echo @|
tr @
'\034')
95 sed -ne "s|^\($s\):|\1|" \
96 -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
97 -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
98 awk -F$fs -v controller
=$controller_name '{
99 indent = length($1)/2;
101 for (i in vname) {if (i > indent) {delete vname[i]}}
102 if (length($3) > 0) {
103 vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
104 if (match(vn,controller) && match($2,"password")) {
109 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
112 function set_vca_variables
() {
113 OSM_VCA_CLOUDNAME
="lxd-cloud"
114 [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME
="localhost"
115 if [ -z "$OSM_VCA_HOST" ]; then
116 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST
=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
117 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST
=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
118 [ -z "$OSM_VCA_HOST" ] && FATAL
"Cannot obtain juju controller IP address"
120 if [ -z "$OSM_VCA_SECRET" ]; then
121 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET
=$
(parse_juju_password
$OSM_NAMESPACE)
122 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET
=$
(parse_juju_password
$CONTROLLER_NAME)
123 [ -z "$OSM_VCA_SECRET" ] && FATAL
"Cannot obtain juju secret"
125 if [ -z "$OSM_VCA_PUBKEY" ]; then
126 OSM_VCA_PUBKEY
=$
(cat $HOME/.local
/share
/juju
/ssh
/juju_id_rsa.pub
)
127 [ -z "$OSM_VCA_PUBKEY" ] && FATAL
"Cannot obtain juju public key"
129 if [ -z "$OSM_VCA_CACERT" ]; then
130 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT
=$
(juju controllers
--format json | jq
-r --arg controller
$OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 |
tr -d \\n
)
131 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT
=$
(juju controllers
--format json | jq
-r --arg controller
$CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 |
tr -d \\n
)
132 [ -z "$OSM_VCA_CACERT" ] && FATAL
"Cannot obtain juju CA certificate"
136 function generate_secret
() {
137 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
138 head /dev
/urandom |
tr -dc A-Za-z0-9 |
head -c 32
139 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
142 function check_packages
() {
144 echo -e "Checking required packages: ${NEEDED_PACKAGES}"
145 for PACKAGE
in ${NEEDED_PACKAGES} ; do
147 if [ $?
-ne 0 ]; then
148 echo -e "Package ${PACKAGE} is not installed."
149 echo -e "Updating apt-cache ..."
151 echo -e "Installing ${PACKAGE} ..."
152 sudo apt-get
install -y ${PACKAGE} || FATAL
"failed to install ${PACKAGE}"
155 echo -e "Required packages are present: ${NEEDED_PACKAGES}"
159 # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
160 # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
161 # Return: true(0) if user type 'yes'; false (1) if user type 'no'
162 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
163 read -e -p "$1" USER_CONFIRMATION
165 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
166 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
167 [ "${USER_CONFIRMATION,,}" == "yes" ] ||
[ "${USER_CONFIRMATION,,}" == "y" ] && return 0
168 [ "${USER_CONFIRMATION,,}" == "no" ] ||
[ "${USER_CONFIRMATION,,}" == "n" ] && return 1
169 read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
171 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
174 function install_osmclient
(){
175 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
176 CLIENT_RELEASE
=${RELEASE#"-R "}
177 CLIENT_REPOSITORY_KEY
="OSM%20ETSI%20Release%20Key.gpg"
178 CLIENT_REPOSITORY
=${REPOSITORY#"-r "}
179 CLIENT_REPOSITORY_BASE
=${REPOSITORY_BASE#"-u "}
180 key_location
=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
181 curl
$key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE
=1 apt-key add
-
182 sudo add-apt-repository
-y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
183 sudo apt-get
-y update
184 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y python3-pip
185 sudo
-H LC_ALL
=C python3
-m pip
install -U pip
186 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y python3-osm-im python3-osmclient
187 if [ -f /usr
/lib
/python
3/dist-packages
/osm_im
/requirements.txt
]; then
188 python3
-m pip
install -r /usr
/lib
/python
3/dist-packages
/osm_im
/requirements.txt
190 if [ -f /usr
/lib
/python
3/dist-packages
/osmclient
/requirements.txt
]; then
191 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y libmagic1
192 python3
-m pip
install -r /usr
/lib
/python
3/dist-packages
/osmclient
/requirements.txt
194 [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME
=`lxc list | awk '($2=="SO-ub"){print $6}'`
195 [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME
=`lxc list | awk '($2=="RO"){print $6}'`
196 echo -e "\nOSM client installed"
197 if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
198 echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
199 echo " export OSM_HOSTNAME=${OSM_HOSTNAME}"
200 echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
202 echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
203 echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
204 echo " export OSM_HOSTNAME=<OSM_host>"
206 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
210 function docker_login
() {
211 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
213 [ -z "${DEBUG_INSTALL}" ] || DEBUG
"Docker registry user: ${DOCKER_REGISTRY_USER}"
214 sg docker
-c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
215 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
218 function generate_docker_images
() {
219 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
220 echo "Generating docker images"
221 _build_from
=$COMMIT_ID
222 [ -z "$_build_from" ] && _build_from
="latest"
223 echo "OSM Docker images generated from $_build_from"
224 LWTEMPDIR
="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX
")"
225 trap 'rm -rf "${LWTEMPDIR}"' EXIT
226 for module
in MON POL NBI KEYSTONE RO LCM NG-UI PLA
; do
227 if [ -z "$TO_REBUILD" ] ||
echo $TO_REBUILD |
grep -q ${module} ; then
228 module_lower
=${module,,}
229 if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
232 git
-C ${LWTEMPDIR} clone https
://osm.etsi.org
/gerrit
/osm
/$module
233 git
-C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
234 sg docker
-c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
237 if [ -z "$TO_REBUILD" ] ||
echo $TO_REBUILD |
grep -q osmclient
; then
238 BUILD_ARGS
+=(--build-arg REPOSITORY
="$REPOSITORY")
239 BUILD_ARGS
+=(--build-arg RELEASE
="$RELEASE")
240 BUILD_ARGS
+=(--build-arg REPOSITORY_KEY
="$REPOSITORY_KEY")
241 BUILD_ARGS
+=(--build-arg REPOSITORY_BASE
="$REPOSITORY_BASE")
242 sg docker
-c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
244 echo "Finished generation of docker images"
245 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
248 function cmp_overwrite
() {
249 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
252 if ! $
(cmp "${file1}" "${file2}" >/dev
/null
2>&1); then
253 if [ -f "${file2}" ]; then
254 ask_user
"The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
256 cp -b ${file1} ${file2}
259 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
262 #deploys osm pods and services
263 function deploy_osm_services() {
264 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
265 # helm is already installed as part of install_kubeadm_cluster.sh
267 # Generate helm values to be passed with -f osm-values.yaml
268 sudo mkdir -p ${OSM_HELM_WORK_DIR}
269 sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
271 pubkey: \"${OSM_VCA_PUBKEY}\"
274 # Generate helm values to be passed with --set
276 # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret
=false
"
277 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
278 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath
=${OSM_NAMESPACE_VOL}"
279 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.
host=${OSM_VCA_HOST}"
280 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret
=${OSM_VCA_SECRET}"
281 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert
=${OSM_VCA_CACERT}"
282 [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY
=${OSM_VCA_APIPROXY}"
283 [ ! "$OSM_DOCKER_TAG" == "testing-daily
" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag
=${OSM_DOCKER_TAG}"
284 [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance
=true
"
285 if [ -n "${OSM_BEHIND_PROXY}" ]; then
286 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy
=true
"
287 [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=${HTTP_PROXY}"
288 [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=${HTTPS_PROXY}"
289 [ -n "${NO_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=${NO_PROXY}"
292 echo "helm
-n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers
/helm
/osm
-f ${OSM_HELM_WORK_DIR}/osm-values.yaml
${OSM_HELM_OPTS}"
293 helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}
295 # Override existing values.yaml with the final values.yaml used to install OSM
296 helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
297 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
300 #deploy charmed services
301 function deploy_charmed_services() {
302 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
303 juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
304 juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE
305 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
309 function deploy_mongodb() {
310 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
311 deploy_charmed_services
312 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
315 function install_osm_ngsa_service() {
316 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
317 NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
318 [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
319 $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
320 FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed
"
321 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
324 function add_local_k8scluster() {
325 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
326 /usr/bin/osm --all-projects vim-create \
327 --name _system-osm-vim \
328 --account_type dummy \
329 --auth_url http://dummy \
330 --user osm --password osm --tenant osm \
331 --description "dummy
" \
332 --config '{management_network_name: mgmt}'
333 /usr/bin/osm --all-projects k8scluster-add \
334 --creds ${HOME}/.kube/config \
335 --vim _system-osm-vim \
336 --k8s-nets '{"net1
": null}' \
338 --description "OSM Internal Cluster
" \
340 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
343 function configure_apt_proxy() {
344 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
346 OSM_APT_PROXY_FILE="/etc
/apt
/apt.conf.d
/osm-apt
"
347 echo "Configuring apt proxy
in file ${OSM_APT_PROXY_FILE}"
348 if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
349 sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
350 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
353 sudo sed -i "s|Proxy.
*|Proxy
\"${OSM_APT_PROXY}\"; }|
" ${OSM_APT_PROXY_FILE}
355 sudo apt-get update || FATAL "Configured apt proxy
, but couldn
't run 'apt-get update
'. Check ${OSM_APT_PROXY_FILE}"
356 track prereq apt_proxy_configured_ok
357 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
360 function ask_proceed() {
361 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
363 [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
364 1. Install and configure LXD
367 4. Disable swap space
368 5. Install and initialize Kubernetes
370 Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
372 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
375 function check_osm_behind_proxy() {
376 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
378 export OSM_BEHIND_PROXY=""
379 export OSM_PROXY_ENV_VARIABLES=""
380 [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
381 [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
382 [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
383 [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
384 [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
385 [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
387 echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
388 echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
390 if [ -n "${OSM_BEHIND_PROXY}" ]; then
391 [ -z "$ASSUME_YES" ] && ! ask_user "
392 The following env variables have been found for the current user:
393 ${OSM_PROXY_ENV_VARIABLES}.
395 This suggests that this machine is behind a proxy and a special configuration is required.
396 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
399 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
400 Depending on the program, the env variables to work behind a proxy might be different
401 (e.g. http_proxy vs HTTP_PROXY).
403 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
404 and HTTPS_PROXY are defined.
406 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
407 those env variables are also set for root user. If you are not sure whether those variables
408 are configured for the root user, you can stop the installation now.
410 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
412 echo "This machine is not behind a proxy"
415 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
418 function find_devops_folder() {
419 if [ -z "$OSM_DEVOPS" ]; then
420 if [ -n "$TEST_INSTALLER" ]; then
421 echo -e "\nUsing local devops repo for OSM installation"
422 OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
424 echo -e "\nCreating temporary dir for OSM installation"
425 OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
426 trap 'rm -rf "$OSM_DEVOPS"' EXIT
427 git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
432 function install_osm() {
433 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
438 check_osm_behind_proxy
439 check_packages "git wget curl tar snapd"
440 sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
443 track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
445 track checks checkingroot_ok
446 [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
447 track checks noroot_ok
449 track checks proceed_ok
451 echo "Installing OSM"
453 [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
455 echo "Determining IP address of the interface with the default route"
456 [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print
$5; exit}')
457 [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~
/^
0.0.0.0/ {print
$8; exit}')
458 [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
459 OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a
,"/"); print a
[1]; exit}'`
460 [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
462 # configure apt proxy
463 [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
465 # if no host is passed in, we need to install lxd, unless explicilty asked not to
466 if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then
467 LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
468 [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
469 $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
472 track prereq prereqok_ok
474 if [ ! -n "$INSTALL_NODOCKER" ]; then
475 DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
476 [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
477 [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
478 $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
481 track docker_ce docker_ce_ok
483 echo "Creating folders for installation"
484 [ ! -d "$OSM_WORK_DIR" ] && sudo mkdir -p $OSM_WORK_DIR
485 sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_WORK_DIR/kubeadm-config.yaml
487 $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
488 FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
489 track k8scluster k8scluster_ok
491 JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
492 [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
493 [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
494 [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
495 [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
496 [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
497 $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
501 # Deploy OSM services
502 [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
503 track docker_images docker_images_ok
506 track deploy_osm deploy_mongodb_ok
508 track deploy_osm deploy_osm_services_k8s_ok
509 if [ -n "$INSTALL_K8S_MONITOR" ]; then
510 # install OSM MONITORING
511 install_k8s_monitoring
512 track deploy_osm install_k8s_monitoring_ok
514 if [ -n "$INSTALL_NGSA" ]; then
515 # optional NGSA install
516 install_osm_ngsa_service
517 track deploy_osm install_osm_ngsa_ok
520 [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
521 track osmclient osmclient_ok
523 echo -e "Checking OSM health state..."
524 $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
525 (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
526 echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
527 track healthchecks osm_unhealthy didnotconverge)
528 track healthchecks after_healthcheck_ok
531 track final_ops add_local_k8scluster_ok
533 arrange_docker_default_network_policy
535 wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
538 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
542 function install_to_openstack() {
543 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
546 FATAL "OpenStack installer requires a valid external network name"
549 # Install Pip for Python3
550 sudo apt install -y python3-pip python3-venv
551 sudo -H LC_ALL=C python3 -m pip install -U pip
553 # Create a venv to avoid conflicts with the host installation
554 python3 -m venv $OPENSTACK_PYTHON_VENV
556 source $OPENSTACK_PYTHON_VENV/bin/activate
558 # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
559 python -m pip install -U wheel
560 python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
562 # Install the Openstack cloud module (ansible>=2.10)
563 ansible-galaxy collection install openstack.cloud
565 export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
567 OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
569 ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
571 if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
572 ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
575 if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
576 ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
579 # Execute the Ansible playbook based on openrc or clouds.yaml
582 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
583 $OSM_DEVOPS/installers/openstack/site.yml
585 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
586 -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
592 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
596 function arrange_docker_default_network_policy() {
597 echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
598 sudo iptables -I DOCKER-USER -j ACCEPT
599 sudo iptables-save | sudo tee /etc/iptables/rules.v4
600 sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
603 function install_k8s_monitoring() {
604 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
605 # install OSM monitoring
606 sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
607 sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
608 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
611 function dump_vars(){
612 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
613 echo "APT_PROXY_URL=$APT_PROXY_URL"
614 echo "DEVELOP=$DEVELOP"
615 echo "DEBUG_INSTALL=$DEBUG_INSTALL"
616 echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
617 echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
618 echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
619 echo "DOCKER_USER=$DOCKER_USER"
620 echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
621 echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
622 echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
623 echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
624 echo "INSTALL_LXD=$INSTALL_LXD"
625 echo "INSTALL_NGSA=$INSTALL_NGSA"
626 echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
627 echo "INSTALL_NOJUJU=$INSTALL_NOJUJU"
628 echo "INSTALL_NOLXD=$INSTALL_NOLXD"
629 echo "INSTALL_ONLY=$INSTALL_ONLY"
630 echo "INSTALL_PLA=$INSTALL_PLA"
631 echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
632 echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
633 echo "NO_HOST_PORTS=$NO_HOST_PORTS"
634 echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
635 echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
636 echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
637 echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
638 echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
639 echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
640 echo "OSM_DEVOPS=$OSM_DEVOPS"
641 echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
642 echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
643 echo "OSM_NAMESPACE=$OSM_NAMESPACE"
644 echo "OSM_VCA_HOST=$OSM_VCA_HOST"
645 echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
646 echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
647 echo "OSM_WORK_DIR=$OSM_WORK_DIR"
648 echo "PULL_IMAGES=$PULL_IMAGES"
649 echo "RECONFIGURE=$RECONFIGURE"
650 echo "RELEASE=$RELEASE"
651 echo "REPOSITORY=$REPOSITORY"
652 echo "REPOSITORY_BASE=$REPOSITORY_BASE"
653 echo "REPOSITORY_KEY=$REPOSITORY_KEY"
654 echo "SHOWOPTS=$SHOWOPTS"
655 echo "TEST_INSTALLER=$TEST_INSTALLER"
656 echo "TO_REBUILD=$TO_REBUILD"
657 echo "UNINSTALL=$UNINSTALL"
658 echo "UPDATE=$UPDATE"
659 echo "Install from specific refspec (-b): $COMMIT_ID"
660 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
663 function parse_docker_registry_url() {
664 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
665 DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); split(a
[1],b
,":"); print b
[1]}')
666 DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); split(a
[1],b
,":"); print b
[2]}')
667 DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); print a
[2]}')
668 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
672 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
673 echo "** Trapped CTRL-C"
674 FATAL "User stopped the installation"
675 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
688 INSTALL_FROM_SOURCE=""
692 INSTALL_K8S_MONITOR=""
696 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
697 LXD_REPOSITORY_PATH=""
698 INSTALL_LIGHTWEIGHT="y"
699 INSTALL_TO_OPENSTACK=""
700 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
701 OPENSTACK_PUBLIC_NET_NAME=""
702 OPENSTACK_ATTACH_VOLUME="false"
703 OPENSTACK_SSH_KEY_FILE=""
704 OPENSTACK_USERDATA_FILE=""
705 OPENSTACK_VM_NAME="server-osm"
706 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
712 INSTALL_NOHOSTCLIENT=""
713 INSTALL_CACHELXDIMAGES=""
718 OSM_VCA_CLOUDNAME="localhost"
719 OSM_VCA_K8S_CLOUDNAME="k8scloud"
723 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
724 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
725 OSM_WORK_DIR="/etc/osm"
726 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
727 OSM_HOST_VOL="/var/lib/osm"
728 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
729 OSM_DOCKER_TAG=latest
730 DOCKER_USER=opensourcemano
733 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
734 PROMETHEUS_TAG=v2.28.1
736 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
737 PROMETHEUS_CADVISOR_TAG=latest
739 OSM_DATABASE_COMMONKEY=
740 ELASTIC_VERSION=6.4.2
741 ELASTIC_CURATOR_VERSION=5.5.4
742 POD_NETWORK_CIDR=10.244.0.0/16
743 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
744 RE_CHECK='^
[a-z0-9
]([-a-z0-9]*[a-z0-9
])?$
'
748 OSM_INSTALLATION_TYPE="Default"
750 while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
753 APT_PROXY_URL=${OPTARG}
760 REPOSITORY="${OPTARG}"
761 REPO_ARGS+=(-r "$REPOSITORY")
764 REPOSITORY_KEY="${OPTARG}"
765 REPO_ARGS+=(-k "$REPOSITORY_KEY")
768 REPOSITORY_BASE="${OPTARG}"
769 REPO_ARGS+=(-u "$REPOSITORY_BASE")
773 REPO_ARGS+=(-R "$RELEASE")
776 OSM_DEVOPS="${OPTARG}"
780 [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
781 [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
784 INSTALL_TO_OPENSTACK="y"
785 if [ -n "${OPTARG}" ]; then
786 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
788 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
793 OPENSTACK_SSH_KEY_FILE="${OPTARG}"
796 OPENSTACK_USERDATA_FILE="${OPTARG}"
799 OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
802 [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
803 [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
804 [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
805 [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
806 [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
807 [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
808 [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
809 [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
810 [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
811 [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
812 [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
813 [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
814 [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
815 [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
816 [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
819 OSM_VCA_HOST="${OPTARG}"
822 OSM_VCA_SECRET="${OPTARG}"
825 OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
828 OSM_DOCKER_TAG="${OPTARG}"
829 REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
832 DOCKER_USER="${OPTARG}"
835 OSM_VCA_PUBKEY=$(cat ${OPTARG})
838 OSM_VCA_APIPROXY="${OPTARG}"
841 LXD_CLOUD_FILE="${OPTARG}"
844 LXD_CRED_FILE="${OPTARG}"
847 CONTROLLER_NAME="${OPTARG}"
850 DOCKER_REGISTRY_URL="${OPTARG}"
853 DOCKER_PROXY_URL="${OPTARG}"
856 MODULE_DOCKER_TAG="${OPTARG}"
859 [ "${OPTARG}" == "help" ] && usage && exit 0
860 [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
861 [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
862 [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
863 [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
864 [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
865 [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
866 [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
867 [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
868 [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
869 [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
870 [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
871 [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
872 [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue
873 [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
874 [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
875 [ "${OPTARG}" == "pullimages" ] && continue
876 [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
877 [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
878 [ "${OPTARG}" == "bundle" ] && continue
879 [ "${OPTARG}" == "k8s" ] && continue
880 [ "${OPTARG}" == "lxd" ] && continue
881 [ "${OPTARG}" == "lxd-cred" ] && continue
882 [ "${OPTARG}" == "microstack" ] && continue
883 [ "${OPTARG}" == "overlay" ] && continue
884 [ "${OPTARG}" == "only-vca" ] && continue
885 [ "${OPTARG}" == "small-profile" ] && continue
886 [ "${OPTARG}" == "vca" ] && continue
887 [ "${OPTARG}" == "ha" ] && continue
888 [ "${OPTARG}" == "tag" ] && continue
889 [ "${OPTARG}" == "registry" ] && continue
890 [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
891 [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
892 [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
893 [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
894 [ "${OPTARG}" == "nocachelxdimages" ] && continue
895 [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
896 echo -e "Invalid option: '--$OPTARG'\n" >&2
900 echo "Option -$OPTARG requires an argument" >&2
904 echo -e "Invalid option: '-$OPTARG'\n" >&2
919 source $OSM_DEVOPS/common/all_funcs
921 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
922 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
924 # Uninstall if "--uninstall"
925 if [ -n "$UNINSTALL" ]; then
926 if [ -n "$CHARMED" ]; then
927 ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
928 FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
930 ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
931 FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
937 # Installation starts here
939 # Get README and create OSM_TRACK_INSTALLATION_ID
940 wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README.txt &> /dev/null
941 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
943 # Get OS info to be tracked
944 os_distro=$(lsb_release -i 2>/dev/null | awk '{print
$3}')
946 os_release=$(lsb_release -r 2>/dev/null | awk '{print
$2}')
948 os_info="${os_distro}_${os_release}"
949 os_info="${os_info// /_}"
951 # Charmed installation
952 if [ -n "$CHARMED" ]; then
953 sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
954 ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
955 FATAL_TRACK charmed_install "charmed_install.sh failed"
956 wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
961 # Installation to Openstack
962 if [ -n "$INSTALL_TO_OPENSTACK" ]; then
963 install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
968 # Community_installer
969 # Check incompatible options
970 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
971 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
972 # Special cases go first
973 # if develop, we force master
974 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
975 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
976 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
977 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
978 # This is where installation starts