test/test_vimconn.sh

   1 #!/bin/bash
   2
   3 ##
   4 # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
   5 # This file is part of openmano
   6 # All Rights Reserved.
   7 #
   8 # Licensed under the Apache License, Version 2.0 (the "License"); you may
   9 # not use this file except in compliance with the License. You may obtain
  10 # a copy of the License at
  11 #
  12 #         http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 # Unless required by applicable law or agreed to in writing, software
  15 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
  16 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  17 # License for the specific language governing permissions and limitations
  18 # under the License.
  19 #
  20 # For those usages not covered by the Apache License, Version 2.0 please
  21 # contact with: nfvlabs@tid.es
  22 ##
  23
  24 #This script can be used as a basic test of openmano deployment over a vim
  25 #in order to use you need to set the VIM_XXXX bash variables with a vim values
  26 #    VIM_TYPE         openstack or openvim
  27 #    VIM_USERNAME     e.g.: admin
  28 #    VIM_PASSWORD
  29 #    VIM_AUTH_URL     url to access VIM e.g. http:/openstack:35357/v2.0
  30 #    VIM_AUTH_URL_ADMIN admin url
  31 #    VIM_TENANT_NAME  e.g.: admin
  32 #    VIM_CONFIG       e.g.: "'network_vlan_ranges: sriov_net'"
  33 #    VIM_TEST_IMAGE_PATH_LINUX  image path(location) to use by the VNF linux
  34 #    VIM_TEST_IMAGE_PATH_NFV image path(location) to use by the VNF dataplaneVNF_2VMs and dataplaneVNF3
  35
  36 #it should be used with source. It can modifies /home/$USER/.bashrc appending the variables
  37 #you need to delete them manually if desired
  38
  39 function usage(){
  40     echo -e "usage: ${BASH_SOURCE[0]} [OPTIONS] <action>\n  test VIM managing from openmano"
  41     echo -e "  <action> is a list of the following items (by default 'reset create')"
  42     echo -e "    reset     reset the openmano database content"
  43     echo -e "    create    creates items at VIM"
  44     echo -e "    delete    delete created items"
  45     echo -e "  OPTIONS:"
  46     echo -e "    -f --force       does not prompt for confirmation"
  47     echo -e "    -h --help        shows this help"
  48     echo -e "    --insert-bashrc  insert the created tenant,datacenter variables at"
  49     echo -e "                     ~/.bashrc to be available by openmano config"
  50 }
  51
  52 function is_valid_uuid(){
  53     echo "$1" | grep -q -E '^[0-9a-f]{8}-([0-9a-f]{4}-){3}[0-9a-f]{12}$' && return 0
  54     echo "$1" | grep -q -E '^[0-9a-f]{32}$' && return 0
  55     return 1
  56 }
  57
  58 #detect if is called with a source to use the 'exit'/'return' command for exiting
  59 [[ ${BASH_SOURCE[0]} != $0 ]] && _exit="return" || _exit="exit"
  60
  61 #detect if environment variables are set
  62 fail=""
  63 [[ -z $VIM_TYPE ]]     && echo "VIM_TYPE variable not defined" >&2 && fail=1
  64 [[ -z $VIM_USERNAME ]] && echo "VIM_USERNAME variable not defined" >&2 && fail=1
  65 [[ -z $VIM_PASSWORD ]] && echo "VIM_PASSWORD variable not defined" >&2 && fail=1
  66 [[ -z $VIM_AUTH_URL ]] && echo "VIM_AUTH_URL variable not defined" >&2 && fail=1
  67 [[ -z $VIM_TENANT_NAME ]] && [[ -z $VIM_TENANT_NAME ]] && echo "neither VIM_TENANT_NAME not VIM_TENANT_ID variables are not defined" >&2 && fail=1
  68 [[ -z $VIM_CONFIG ]] && echo "VIM_CONFIG variable not defined" >&2 && fail=1
  69 [[ -z $VIM_TEST_IMAGE_PATH_LINUX ]] && echo "VIM_TEST_IMAGE_PATH_LINUX variable not defined" >&2 && fail=1
  70 [[ -z $VIM_TEST_IMAGE_PATH_NFV ]]   && echo "VIM_TEST_IMAGE_PATH_NFV variable not defined" >&2 && fail=1
  71 [[ -n $fail ]] && $_exit 1
  72
  73 #check correct arguments
  74 action_list=""
  75 for param in $*
  76 do
  77    if [[ $param == reset ]] || [[ $param == create ]] || [[ $param == delete ]]
  78    then
  79        action_list="$action_list $param"
  80    elif [[ $param == -h ]] || [[ $param == --help ]]
  81    then
  82        usage
  83        $_exit 0
  84    elif [[ $param == -f ]] || [[ $param == --force ]]
  85    then
  86        force=y
  87    elif [[ $param == --insert-bashrc ]]
  88    then
  89        insert_bashrc=y
  90    else
  91        echo "invalid argument '$param'?" &&  usage >&2 && $_exit 1
  92    fi
  93 done
  94
  95 DIRNAME=$(dirname $(readlink -f ${BASH_SOURCE[0]}))
  96 DIRmano=$(dirname $DIRNAME)
  97 DIRscript=${DIRmano}/scripts
  98 #by default action should be reset and create
  99 [[ -z $action_list ]] && action_list="reset create"
 100
 101 for action in $action_list
 102 do
 103 if [[ $action == "reset" ]]
 104 then
 105
 106     #ask for confirmation if argument is not -f --force
 107     [[ $force != y ]] && read -e -p "WARNING: reset openmano database, content will be lost!!! Continue(y/N)" force
 108     [[ $force != y ]] && [[ $force != yes ]] && echo "aborted!" && $_exit
 109
 110     echo "Stopping openmano"
 111     $DIRscript/service-openmano.sh mano stop
 112     echo "Initializing openmano database"
 113     $DIRmano/database_utils/init_mano_db.sh -u mano -p manopw --createdb
 114     echo "Starting openmano"
 115     $DIRscript/service-openmano.sh mano start
 116
 117 elif [[ $action == "delete" ]]
 118 then
 119     result=`openmano tenant-list TESTVIM-tenant`
 120     nfvotenant=`echo $result |gawk '{print $1}'`
 121     #check a valid uuid is obtained
 122     is_valid_uuid $nfvotenant || ! echo "Tenant TESTVIM-tenant not found. Already delete?" >&2 || $_exit 1
 123     export OPENMANO_TENANT=$nfvotenant
 124     openmano instance-scenario-delete -f simple-instance     || echo "fail"
 125     openmano instance-scenario-delete -f complex2-instance   || echo "fail"
 126     openmano scenario-delete -f simple       || echo "fail"
 127     openmano scenario-delete -f complex2     || echo "fail"
 128     openmano vnf-delete -f linux             || echo "fail"
 129     openmano vnf-delete -f dataplaneVNF_2VMs || echo "fail"
 130     openmano vnf-delete -f dataplaneVNF3     || echo "fail"
 131     openmano vnf-delete -f TESTVIM-VNF1          || echo "fail"
 132     openmano datacenter-detach TESTVIM-dc        || echo "fail"
 133     openmano datacenter-delete -f TESTVIM-dc     || echo "fail"
 134     openmano tenant-delete -f TESTVIM-tenant     || echo "fail"
 135
 136 elif [[ $action == "create" ]]
 137 then
 138
 139     printf "%-50s" "Creating openmano tenant 'TESTVIM-tenant': "
 140     result=`openmano tenant-create TESTVIM-tenant --description="created by test_vimconn.sh"`
 141     nfvotenant=`echo $result |gawk '{print $1}'`
 142     #check a valid uuid is obtained
 143     ! is_valid_uuid $nfvotenant && echo "FAIL" && echo "    $result" && $_exit 1
 144     export OPENMANO_TENANT=$nfvotenant
 145     [[ $insert_bashrc == y ]] && echo -e "\nexport OPENMANO_TENANT=$nfvotenant"  >> ~/.bashrc
 146     echo $nfvotenant
 147
 148     printf "%-50s" "Creating datacenter 'TESTVIM-dc' in openmano:"
 149     URL_ADMIN_PARAM=""
 150     [[ -n $VIM_AUTH_URL_ADMIN ]] && URL_ADMIN_PARAM="--url_admin=$VIM_AUTH_URL_ADMIN"
 151     result=`openmano datacenter-create TESTVIM-dc "${VIM_AUTH_URL}" "--type=$VIM_TYPE" $URL_ADMIN_PARAM "--config=${VIM_CONFIG}"`
 152     datacenter=`echo $result |gawk '{print $1}'`
 153     #check a valid uuid is obtained
 154     ! is_valid_uuid $datacenter && echo "FAIL" && echo "    $result" && $_exit 1
 155     echo $datacenter
 156     export OPENMANO_DATACENTER=$datacenter
 157     [[ $insert_bashrc == y ]] && echo -e "\nexport OPENMANO_DATACENTER=$datacenter"  >> ~/.bashrc
 158
 159     printf "%-50s" "Attaching openmano tenant to the datacenter:"
 160     [[ -n $VIM_PASSWORD ]]    && passwd_param="--password=$VIM_PASSWORD"                    || passwd_param=""
 161     [[ -n $VIM_TENANT_NAME ]] && vim_tenant_name_param="--vim-tenant-name=$VIM_TENANT_NAME" || vim_tenant_name_param=""
 162     [[ -n $VIM_TENANT_ID   ]] && vim_tenant_id_param="--vim-tenant-id=$VIM_TENANT_ID"       || vim_tenant_id_param=""
 163     [[ -n $VIM_PASSWORD ]] && passwd_param="--password=$VIM_PASSWORD" || passwd_param=""
 164     result=`openmano datacenter-attach TESTVIM-dc "--user=$VIM_USERNAME" "$passwd_param" "$vim_tenant_name_param"`
 165     [[ $? != 0 ]] && echo  "FAIL" && echo "    $result" && $_exit 1
 166     echo OK
 167
 168     printf "%-50s" "Updating external nets in openmano: "
 169     result=`openmano datacenter-netmap-delete -f --all`
 170     [[ $? != 0 ]] && echo  "FAIL" && echo "    $result"  && $_exit 1
 171     result=`openmano datacenter-netmap-import -f`
 172     [[ $? != 0 ]] && echo  "FAIL" && echo "    $result"  && $_exit 1
 173     echo OK
 174
 175     printf "%-50s" "Creating VNF 'linux': "
 176     #glance image-create --file=./US1404dpdk.qcow2 --name=US1404dpdk --disk-format=qcow2 --min-disk=2 --is-public=True --container-format=bare
 177     #nova image-meta US1404dpdk set location=/mnt/powervault/virtualization/vnfs/os/US1404dpdk.qcow2
 178     #glance image-create --file=./US1404user.qcow2 --min-disk=2 --is-public=True --container-format=bare --name=US1404user --disk-format=qcow2
 179     #nova image-meta US1404user  set location=/mnt/powervault/virtualization/vnfs/os/US1404user.qcow2
 180     result=`openmano vnf-create $DIRmano/vnfs/examples/linux.yaml "--image-path=$VIM_TEST_IMAGE_PATH_LINUX"`
 181     vnf=`echo $result |gawk '{print $1}'`
 182     #check a valid uuid is obtained
 183     ! is_valid_uuid $vnf && echo FAIL && echo "    $result" &&  $_exit 1
 184     echo $vnf
 185
 186     printf "%-50s" "Creating VNF 1PF,1VF,2GB,4PThreads: "
 187     result=`openmano vnf-create "vnf:
 188         name: TESTVIM-VNF1
 189         external-connections:
 190         - name: eth0
 191           type: mgmt
 192           VNFC: TESTVIM-VNF1-VM
 193           local_iface_name: eth0
 194         - name: PF0
 195           type: data
 196           VNFC: TESTVIM-VNF1-VM
 197           local_iface_name: PF0
 198         - name: VF0
 199           type: data
 200           VNFC: TESTVIM-VNF1-VM
 201           local_iface_name: VF0
 202         VNFC:
 203         - name: TESTVIM-VNF1-VM
 204           VNFC image: $VIM_TEST_IMAGE_PATH_NFV
 205           numas:
 206           - paired-threads: 2
 207             paired-threads-id: [ [0,2], [1,3] ]
 208             memory: 2
 209             interfaces:
 210             - name:  PF0
 211               vpci: '0000:00:11.0'
 212               dedicated: 'yes'
 213               bandwidth: 10 Gbps
 214               mac_address: '20:33:45:56:77:44'
 215             - name:  VF0
 216               vpci:  '0000:00:12.0'
 217               dedicated: 'no'
 218               bandwidth: 1 Gbps
 219               mac_address: '20:33:45:56:77:45'
 220           bridge-ifaces:
 221           - name: eth0
 222             vpci: '0000:00:09.0'
 223             bandwidth: 1 Mbps
 224             mac_address: '20:33:45:56:77:46'
 225             model: e1000
 226        "`
 227     vnf=`echo $result |gawk '{print $1}'`
 228     ! is_valid_uuid $vnf && echo FAIL && echo "    $result" && $_exit 1
 229     echo $vnf
 230
 231     printf "%-50s" "Creating VNF 'dataplaneVNF_2VMs': "
 232     result=`openmano vnf-create $DIRmano/vnfs/examples/dataplaneVNF_2VMs.yaml "--image-path=$VIM_TEST_IMAGE_PATH_NFV,$VIM_TEST_IMAGE_PATH_NFV"`
 233     vnf=`echo $result |gawk '{print $1}'`
 234     ! is_valid_uuid $vnf && echo FAIL && echo "    $result" && $_exit 1
 235     echo $vnf
 236
 237     printf "%-50s" "Creating VNF 'dataplaneVNF3.yaml': "
 238     result=`openmano vnf-create $DIRmano/vnfs/examples/dataplaneVNF3.yaml "--image-path=$VIM_TEST_IMAGE_PATH_NFV"`
 239     vnf=`echo $result |gawk '{print $1}'`
 240     ! is_valid_uuid $vnf && echo FAIL && echo "    $result" && $_exit 1
 241     echo $vnf
 242
 243     for sce in simple complex2
 244     do
 245       printf "%-50s" "Creating scenario '$sce':"
 246       result=`openmano scenario-create $DIRmano/scenarios/examples/${sce}.yaml`
 247       scenario=`echo $result |gawk '{print $1}'`
 248       ! is_valid_uuid $scenario && echo FAIL && echo "    $result" &&  $_exit 1
 249       echo $scenario
 250     done
 251
 252     #USER_KEY=""
 253     key_param1=""
 254     key_param2=""
 255     #for file_key in ${HOME}/.ssh/*.pub
 256     #do
 257     #    [[ -n ${USER_KEY} ]] && USER_KEY="${USER_KEY},"
 258     #    USER_KEY="${USER_KEY}$(cat $file_key)"
 259     #done
 260     #[[  -n ${USER_KEY} ]] && key_param1="--keypair=${USER}:${USER_KEY}" && key_param2="--keypair=${USER_KEY}"
 261     key_param1=--keypair-auto
 262
 263     for sce in simple complex2
 264     do
 265       printf "%-50s" "Deploying scenario '$sce':"
 266       result=`openmano instance-scenario-create --scenario $sce --name ${sce}-instance "$key_param1" "$key_param2"`
 267       instance=`echo $result |gawk '{print $1}'`
 268       ! is_valid_uuid $instance && echo FAIL && echo "    $result" && $_exit 1
 269       echo $instance
 270     done
 271
 272     echo
 273     echo DONE
 274 fi
 275 done
 276