scripts/install-openmano.sh

   1 #!/bin/bash
   2
   3 ##
   4 # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
   5 # This file is part of openmano
   6 # All Rights Reserved.
   7 #
   8 # Licensed under the Apache License, Version 2.0 (the "License"); you may
   9 # not use this file except in compliance with the License. You may obtain
  10 # a copy of the License at
  11 #
  12 #         http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 # Unless required by applicable law or agreed to in writing, software
  15 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
  16 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  17 # License for the specific language governing permissions and limitations
  18 # under the License.
  19 #
  20 # For those usages not covered by the Apache License, Version 2.0 please
  21 # contact with: nfvlabs@tid.es
  22 ##
  23
  24 #ONLY TESTED in Ubuntu 16.04   partially tested in Ubuntu 14.10 14.04 16.04, CentOS7 and RHEL7
  25 #Get needed packages, source code and configure to run openmano
  26 #Ask for database user and password if not provided
  27
  28 function usage(){
  29     echo -e "usage: sudo $0 [OPTIONS]"
  30     echo -e "Install last stable source code in ./openmano and the needed packages"
  31     echo -e "On a Ubuntu 16.04 it configures openmano as a service"
  32     echo -e "  OPTIONS"
  33     echo -e "     -u USER:    database admin user. 'root' by default. Prompts if needed"
  34     echo -e "     -p PASS:    database admin password to be used or installed. Prompts if needed"
  35     echo -e "     -q --quiet: install in unattended mode"
  36     echo -e "     -h --help:  show this help"
  37     echo -e "     --develop:  install last version for developers, and do not configure as a service"
  38     echo -e "     --forcedb:  reinstall mano_db DB, deleting previous database if exists and creating a new one"
  39     echo -e "     --force:    makes idenpotent, delete previous installations folders if needed"
  40     echo -e "     --noclone:  assumes that openmano was cloned previously and that this script is run from the local repo"
  41     echo -e "     --no-install-packages: use this option to skip updating and installing the requires packages. This avoid wasting time if you are sure requires packages are present e.g. because of a previous installation"
  42 }
  43
  44 function install_packages(){
  45     [ -x /usr/bin/apt-get ] && apt-get install -y $*
  46     [ -x /usr/bin/yum ]     && yum install     -y $*
  47
  48     #check properly installed
  49     for PACKAGE in $*
  50     do
  51         PACKAGE_INSTALLED="no"
  52         [ -x /usr/bin/apt-get ] && dpkg -l $PACKAGE            &>> /dev/null && PACKAGE_INSTALLED="yes"
  53         [ -x /usr/bin/yum ]     && yum list installed $PACKAGE &>> /dev/null && PACKAGE_INSTALLED="yes"
  54         if [ "$PACKAGE_INSTALLED" = "no" ]
  55         then
  56             echo "failed to install package '$PACKAGE'. Revise network connectivity and try again" >&2
  57             exit 1
  58        fi
  59     done
  60 }
  61
  62 function db_exists() {
  63     RESULT=`mysqlshow --defaults-extra-file="$2" | grep -v Wildcard | grep -o $1`
  64     if [ "$RESULT" == "$1" ]; then
  65         echo " DB $1 exists"
  66         return 0
  67     fi
  68     echo " DB $1 does not exist"
  69     return 1
  70 }
  71
  72 GIT_URL=https://osm.etsi.org/gerrit/osm/RO.git
  73 DBUSER="root"
  74 DBPASSWD=""
  75 DBPASSWD_PARAM=""
  76 QUIET_MODE=""
  77 DEVELOP=""
  78 FORCEDB=""
  79 FORCE=""
  80 NOCLONE=""
  81 NO_PACKAGES=""
  82 while getopts ":u:p:hiq-:" o; do
  83     case "${o}" in
  84         u)
  85             export DBUSER="$OPTARG"
  86             ;;
  87         p)
  88             export DBPASSWD="$OPTARG"
  89             export DBPASSWD_PARAM="-p$OPTARG"
  90             ;;
  91         q)
  92             export QUIET_MODE=yes
  93             export DEBIAN_FRONTEND=noninteractive
  94             ;;
  95         h)
  96             usage && exit 0
  97             ;;
  98         -)
  99             [ "${OPTARG}" == "help" ] && usage && exit 0
 100             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 101             [ "${OPTARG}" == "forcedb" ] && FORCEDB="y" && continue
 102             [ "${OPTARG}" == "force" ]   && FORCEDB="y" && FORCE="y" && continue
 103             [ "${OPTARG}" == "noclone" ] && NOCLONE="y" && continue
 104             [ "${OPTARG}" == "quiet" ] && export QUIET_MODE=yes && export DEBIAN_FRONTEND=noninteractive && continue
 105             [ "${OPTARG}" == "no-install-packages" ] && export NO_PACKAGES=yes && continue
 106             echo -e "Invalid option: '--$OPTARG'\nTry $0 --help for more information" >&2
 107             exit 1
 108             ;;
 109         \?)
 110             echo -e "Invalid option: '-$OPTARG'\nTry $0 --help for more information" >&2
 111             exit 1
 112             ;;
 113         :)
 114             echo -e "Option '-$OPTARG' requires an argument\nTry $0 --help for more information" >&2
 115             exit 1
 116             ;;
 117         *)
 118             usage >&2
 119             exit 1
 120             ;;
 121     esac
 122 done
 123
 124 #check root privileges and non a root user behind
 125 [ "$USER" != "root" ] && echo "Needed root privileges" >&2 && exit 1
 126 if [[ -z "$SUDO_USER" ]] || [[ "$SUDO_USER" = "root" ]]
 127 then
 128     [[ -z $QUIET_MODE ]] && read -e -p "Install in the root user (y/N)?" KK
 129     [[ -z $QUIET_MODE ]] && [[ "$KK" != "y" ]] && [[ "$KK" != "yes" ]] && echo "Cancelled" && exit 1
 130     export SUDO_USER=root
 131 fi
 132
 133 #Discover Linux distribution
 134 #try redhat type
 135 [ -f /etc/redhat-release ] && _DISTRO=$(cat /etc/redhat-release 2>/dev/null | cut  -d" " -f1)
 136 #if not assuming ubuntu type
 137 [ -f /etc/redhat-release ] || _DISTRO=$(lsb_release -is  2>/dev/null)
 138 if [ "$_DISTRO" == "Ubuntu" ]
 139 then
 140     _RELEASE=$(lsb_release -rs)
 141     if [[ ${_RELEASE%%.*} != 14 ]] && [[ ${_RELEASE%%.*} != 16 ]]
 142     then
 143         [[ -z $QUIET_MODE ]] && read -e -p "WARNING! Not tested Ubuntu version. Continue assuming a trusty (14.XX)'? (y/N)" KK
 144         [[ -z $QUIET_MODE ]] && [[ "$KK" != "y" ]] && [[ "$KK" != "yes" ]] && echo "Cancelled" && exit 1
 145         _RELEASE = 14
 146     fi
 147 elif [ "$_DISTRO" == "CentOS" ]
 148 then
 149     _RELEASE="7"
 150     if ! cat /etc/redhat-release | grep -q "7."
 151     then
 152         [[ -z $QUIET_MODE ]] && read -e -p "WARNING! Not tested CentOS version. Continue assuming a '_RELEASE' type? (y/N)" KK
 153         [[ -z $QUIET_MODE ]] && [[ "$KK" != "y" ]] && [[ "$KK" != "yes" ]] && echo "Cancelled" && exit 1
 154     fi
 155 elif [ "$_DISTRO" == "Red" ]
 156 then
 157     _RELEASE="7"
 158     if ! cat /etc/redhat-release | grep -q "7."
 159     then
 160         [[ -z $QUIET_MODE ]] && read -e -p "WARNING! Not tested Red Hat OS version. Continue assuming a '_RELEASE' type? (y/N)" KK
 161         [[ -z $QUIET_MODE ]] && [[ "$KK" != "y" ]] && [[ "$KK" != "yes" ]] && echo "Cancelled" && exit 1
 162     fi
 163 else  #[ "$_DISTRO" != "Ubuntu" -a "$_DISTRO" != "CentOS" -a "$_DISTRO" != "Red" ]
 164     _DISTRO_DISCOVER=$_DISTRO
 165     [ -x /usr/bin/apt-get ] && _DISTRO="Ubuntu" && _RELEASE="14"
 166     [ -x /usr/bin/yum ]     && _DISTRO="CentOS" && _RELEASE="7"
 167     [[ -z $QUIET_MODE ]] && read -e -p "WARNING! Not tested Linux distribution '$_DISTRO_DISCOVER '. Continue assuming a '$_DISTRO $_RELEASE' type? (y/N)" KK
 168     [[ -z $QUIET_MODE ]] && [[ "$KK" != "y" ]] && [[ "$KK" != "yes" ]] && echo "Cancelled" && exit 1
 169 fi
 170
 171 #check if installed as a service
 172 INSTALL_AS_A_SERVICE=""
 173 [[ "$_DISTRO" == "Ubuntu" ]] &&  [[ ${_RELEASE%%.*} == 16 ]] && [[ -z $DEVELOP ]] && INSTALL_AS_A_SERVICE="y"
 174 #Next operations require knowing OPENMANO_BASEFOLDER
 175 if [[ -z "$NOCLONE" ]]; then
 176     if [[ -n "$INSTALL_AS_A_SERVICE" ]] ; then
 177         OPENMANO_BASEFOLDER=__openmano__${RANDOM}
 178     else
 179         OPENMANO_BASEFOLDER="${PWD}/openmano"
 180     fi
 181     [[ -n "$FORCE" ]] && rm -rf $OPENMANO_BASEFOLDER #make idempotent
 182 else
 183     HERE=$(realpath $(dirname $0))
 184     OPENMANO_BASEFOLDER=$(dirname $HERE)
 185 fi
 186
 187
 188 if [[ -z "$NO_PACKAGES" ]]
 189 then
 190 echo '
 191 #################################################################
 192 #####        UPDATE REPOSITORIES                            #####
 193 #################################################################'
 194 [ "$_DISTRO" == "Ubuntu" ] && apt-get update -y
 195
 196 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && yum check-update -y
 197 [ "$_DISTRO" == "CentOS" ] && sudo yum install -y epel-release
 198 [ "$_DISTRO" == "Red" ] && wget http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm \
 199   && sudo rpm -ivh epel-release-7-5.noarch.rpm && sudo yum install -y epel-release && rm -f epel-release-7-5.noarch.rpm
 200 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && sudo yum repolist
 201
 202 fi
 203
 204 if [[ -z "$NO_PACKAGES" ]]
 205 then
 206 echo '
 207 #################################################################
 208 #####               INSTALL REQUIRED PACKAGES               #####
 209 #################################################################'
 210 [ "$_DISTRO" == "Ubuntu" ] && install_packages "git screen wget mysql-server"
 211 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "git screen wget mariadb mariadb-server"
 212
 213 if [[ "$_DISTRO" == "Ubuntu" ]]
 214 then
 215     #start services. By default CentOS does not start services
 216     service mysql start >> /dev/null
 217     # try to set admin password, ignore if fails
 218     [[ -n $DBPASSWD ]] && mysqladmin -u $DBUSER -s password $DBPASSWD
 219 fi
 220
 221 if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ]
 222 then
 223     #start services. By default CentOS does not start services
 224     service mariadb start
 225     service httpd   start
 226     systemctl enable mariadb
 227     systemctl enable httpd
 228     read -e -p "Do you want to configure mariadb (recommended if not done before) (Y/n)" KK
 229     [ "$KK" != "n" -a  "$KK" != "no" ] && mysql_secure_installation
 230
 231     read -e -p "Do you want to set firewall to grant web access port 80,443  (Y/n)" KK
 232     [ "$KK" != "n" -a  "$KK" != "no" ] &&
 233         firewall-cmd --permanent --zone=public --add-service=http &&
 234         firewall-cmd --permanent --zone=public --add-service=https &&
 235         firewall-cmd --reload
 236 fi
 237 fi  #[[ -z "$NO_PACKAGES" ]]
 238
 239 #check and ask for database user password. Must be done after database installation
 240 if [[ -n $QUIET_MODE ]]
 241 then
 242     echo -e "\nCheking database connection and ask for credentials"
 243     while ! mysqladmin -s -u$DBUSER $DBPASSWD_PARAM status >/dev/null
 244     do
 245         [ -n "$logintry" ] &&  echo -e "\nInvalid database credentials!!!. Try again (Ctrl+c to abort)"
 246         [ -z "$logintry" ] &&  echo -e "\nProvide database credentials"
 247         read -e -p "database user? ($DBUSER) " DBUSER_
 248         [ -n "$DBUSER_" ] && DBUSER=$DBUSER_
 249         read -e -s -p "database password? (Enter for not using password) " DBPASSWD_
 250         [ -n "$DBPASSWD_" ] && DBPASSWD="$DBPASSWD_" && DBPASSWD_PARAM="-p$DBPASSWD_"
 251         [ -z "$DBPASSWD_" ] && DBPASSWD=""           && DBPASSWD_PARAM=""
 252         logintry="yes"
 253     done
 254 fi
 255
 256 if [[ -z "$NO_PACKAGES" ]]
 257 then
 258 echo '
 259 #################################################################
 260 #####        INSTALL PYTHON PACKAGES                        #####
 261 #################################################################'
 262 [ "$_DISTRO" == "Ubuntu" ] && install_packages "python-yaml python-bottle python-mysqldb python-jsonschema python-paramiko python-argcomplete python-requests python-logutils libxml2-dev libxslt-dev python-dev python-pip"
 263 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "PyYAML MySQL-python python-jsonschema python-paramiko python-argcomplete python-requests python-logutils libxslt-devel libxml2-devel python-devel python-pip"
 264
 265 #required for vmware connector TODO move that to separete opt in install script
 266 sudo pip install --upgrade pip
 267 sudo pip install pyvcloud
 268 sudo pip install progressbar
 269 sudo pip install prettytable
 270 sudo pip install pyvmomi
 271
 272 #The only way to install python-bottle on Centos7 is with easy_install or pip
 273 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && easy_install -U bottle
 274
 275 #install openstack client needed for using openstack as a VIM
 276 [ "$_DISTRO" == "Ubuntu" ] && install_packages "python-novaclient python-keystoneclient python-glanceclient python-neutronclient"
 277 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "python-devel" && easy_install python-novaclient python-keystoneclient python-glanceclient python-neutronclient #TODO revise if gcc python-pip is needed
 278 fi  #[[ -z "$NO_PACKAGES" ]]
 279
 280 if [[ -z $NOCLONE ]]; then
 281     echo '
 282 #################################################################
 283 #####        DOWNLOAD SOURCE                                #####
 284 #################################################################'
 285     su $SUDO_USER -c "git clone ${GIT_URL} ${OPENMANO_BASEFOLDER}"
 286     su $SUDO_USER -c "cp ${OPENMANO_BASEFOLDER}/.gitignore-common ${OPENMANO_BASEFOLDER}/.gitignore"
 287     [[ -z $DEVELOP ]] && su $SUDO_USER -c "git -C  ${OPENMANO_BASEFOLDER} checkout tags/v1.0.2"
 288 fi
 289
 290 echo '
 291 #################################################################
 292 #####        CREATE DATABASE                                #####
 293 #################################################################'
 294 echo -e "\nCreating temporary file form MYSQL installation and initialization"
 295 TEMPFILE="$(mktemp -q --tmpdir "installopenmano.XXXXXX")"
 296 trap 'rm -f "$TEMPFILE"' EXIT
 297 chmod 0600 "$TEMPFILE"
 298 echo -e "[client]\n user='$DBUSER'\n password='$DBPASSWD'">"$TEMPFILE"
 299
 300 if db_exists "mano_db" $TEMPFILE ; then
 301     if [[ -n $FORCEDB ]]; then
 302         echo "   Deleting previous database mano_db"
 303         DBDELETEPARAM=""
 304         [[ -n $QUIET_MODE ]] && DBDELETEPARAM="-f"
 305         mysqladmin --defaults-extra-file=$TEMPFILE -s drop mano_db $DBDELETEPARAM || ! echo "Could not delete mano_db database" || exit 1
 306         #echo "REVOKE ALL PRIVILEGES ON mano_db.* FROM 'mano'@'localhost';" | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 307         #echo "DELETE USER 'mano'@'localhost';"   | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 308         mysqladmin --defaults-extra-file=$TEMPFILE -s create mano_db || ! echo "Error creating mano_db database" || exit 1
 309         echo "DROP USER 'mano'@'localhost';"   | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 310         echo "CREATE USER 'mano'@'localhost' identified by 'manopw';"   | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 311         echo "GRANT ALL PRIVILEGES ON mano_db.* TO 'mano'@'localhost';" | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 312         echo " Database 'mano_db' created, user 'mano' password 'manopw'"
 313     else
 314         echo "Database exists. Use option '--forcedb' to force the deletion of the existing one" && exit 1
 315     fi
 316 else
 317     mysqladmin -u$DBUSER $DBPASSWD_PARAM -s create mano_db || ! echo "Error creating mano_db database" || exit 1
 318     echo "CREATE USER 'mano'@'localhost' identified by 'manopw';"   | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 319     echo "GRANT ALL PRIVILEGES ON mano_db.* TO 'mano'@'localhost';" | mysql --defaults-extra-file=$TEMPFILE -s || ! echo "Failed while creating user mano at database" || exit 1
 320     echo " Database 'mano_db' created, user 'mano' password 'manopw'"
 321 fi
 322
 323
 324 echo '
 325 #################################################################
 326 #####        INIT DATABASE                                  #####
 327 #################################################################'
 328 su $SUDO_USER -c "${OPENMANO_BASEFOLDER}/database_utils/init_mano_db.sh -u mano -p manopw -d mano_db" || ! echo "Failed while initializing database" || exit 1
 329
 330
 331 if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ]
 332 then
 333     echo '
 334 #################################################################
 335 #####        CONFIGURE firewalld                            #####
 336 #################################################################'
 337     KK=yes
 338     [[ -z $QUIET_MODE ]] && read -e -p "Configure firewalld for openmanod port 9090? (Y/n)" KK
 339     if [ "$KK" != "n" -a  "$KK" != "no" ]
 340     then
 341         #Creates a service file for openmano
 342         echo '<?xml version="1.0" encoding="utf-8"?>
 343 <service>
 344  <short>openmanod</short>
 345  <description>openmanod service</description>
 346  <port protocol="tcp" port="9090"/>
 347 </service>' > /etc/firewalld/services/openmanod.xml
 348         #put proper permissions
 349         pushd /etc/firewalld/services > /dev/null
 350         restorecon openmanod.xml
 351         chmod 640 openmanod.xml
 352         popd > /dev/null
 353         #Add the openmanod service to the default zone permanently and reload the firewall configuration
 354         firewall-cmd --permanent --add-service=openmanod > /dev/null
 355         firewall-cmd --reload > /dev/null
 356         echo "done."
 357     else
 358         echo "skipping."
 359     fi
 360 fi
 361
 362 echo '
 363 #################################################################
 364 #####             CONFIGURE OPENMANO CLIENT                 #####
 365 #################################################################'
 366 #creates a link at ~/bin if not configured as a service
 367 if [[ -z "$INSTALL_AS_A_SERVICE" ]]
 368 then
 369     su $SUDO_USER -c 'mkdir -p ${HOME}/bin'
 370     su $SUDO_USER -c 'rm -f ${HOME}/bin/openmano'
 371     su $SUDO_USER -c 'rm -f ${HOME}/bin/openmano-report'
 372     su $SUDO_USER -c 'rm -f ${HOME}/bin/service-openmano'
 373     su $SUDO_USER -c "ln -s '${OPENMANO_BASEFOLDER}/openmano' "'${HOME}/bin/openmano'
 374     su $SUDO_USER -c "ln -s '${OPENMANO_BASEFOLDER}/scripts/openmano-report.sh'   "'${HOME}/bin/openmano-report'
 375     su $SUDO_USER -c "ln -s '${OPENMANO_BASEFOLDER}/scripts/service-openmano.sh'  "'${HOME}/bin/service-openmano'
 376
 377     #insert /home/<user>/bin in the PATH
 378     #skiped because normally this is done authomatically when ~/bin exist
 379     #if ! su $SUDO_USER -c 'echo $PATH' | grep -q "${HOME}/bin"
 380     #then
 381     #    echo "    inserting /home/$SUDO_USER/bin in the PATH at .bashrc"
 382     #    su $SUDO_USER -c 'echo "PATH=\$PATH:\${HOME}/bin" >> ~/.bashrc'
 383     #fi
 384     if [[ $SUDO_USER == root ]]
 385     then
 386         if ! echo $PATH | grep -q "${HOME}/bin"
 387         then
 388             echo "PATH=\$PATH:\${HOME}/bin" >> ${HOME}/.bashrc
 389         fi
 390     fi
 391 fi
 392
 393 #configure arg-autocomplete for this user
 394 #in case of minimal instalation this package is not installed by default
 395 [[ "$_DISTRO" == "CentOS" || "$_DISTRO" == "Red" ]] && yum install -y bash-completion
 396 #su $SUDO_USER -c 'mkdir -p ~/.bash_completion.d'
 397 su $SUDO_USER -c 'activate-global-python-argcomplete --user'
 398 if ! su  $SUDO_USER -c 'grep -q bash_completion.d/python-argcomplete.sh ${HOME}/.bashrc'
 399 then
 400     echo "    inserting .bash_completion.d/python-argcomplete.sh execution at .bashrc"
 401     su $SUDO_USER -c 'echo ". ${HOME}/.bash_completion.d/python-argcomplete.sh" >> ~/.bashrc'
 402 fi
 403
 404
 405
 406
 407 if [[ -n "$INSTALL_AS_A_SERVICE"  ]]
 408 then
 409 echo '
 410 #################################################################
 411 #####             CONFIGURE OPENMANO SERVICE                #####
 412 #################################################################'
 413
 414     ${OPENMANO_BASEFOLDER}/scripts/install-openmano-service.sh -f ${OPENMANO_BASEFOLDER} `[[ -z "$NOCLONE" ]] && echo "-d"`
 415 #    rm -rf ${OPENMANO_BASEFOLDER}
 416 #    alias service-openmano="service openmano"
 417 #    echo 'alias service-openmano="service openmano"' >> ${HOME}/.bashrc
 418
 419     echo
 420     echo "Done!  installed at /opt/openmano"
 421     echo " Manage server with 'sudo service openmano start|stop|status|...' "
 422
 423
 424 else
 425
 426     echo
 427     echo "Done!  you may need to logout and login again for loading client configuration"
 428     echo " Run './${OPENMANO_BASEFOLDER}/scripts/service-openmano.sh start' for starting openmano in a screen"
 429
 430 fi
 431
 432
 433