scripts/install-openmano.sh

   1 #!/bin/bash
   2
   3 ##
   4 # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
   5 # This file is part of openmano
   6 # All Rights Reserved.
   7 #
   8 # Licensed under the Apache License, Version 2.0 (the "License"); you may
   9 # not use this file except in compliance with the License. You may obtain
  10 # a copy of the License at
  11 #
  12 #         http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 # Unless required by applicable law or agreed to in writing, software
  15 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
  16 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  17 # License for the specific language governing permissions and limitations
  18 # under the License.
  19 #
  20 # For those usages not covered by the Apache License, Version 2.0 please
  21 # contact with: nfvlabs@tid.es
  22 ##
  23
  24 #ONLY TESTED in Ubuntu 16.04   partially tested in Ubuntu 14.10 14.04 16.04, CentOS7 and RHEL7
  25 #Get needed packages, source code and configure to run openmano
  26 #Ask for database user and password if not provided
  27
  28 function usage(){
  29     echo -e "usage: sudo $0 [OPTIONS]"
  30     echo -e "Install last stable source code in ./openmano and the needed packages"
  31     echo -e "On a Ubuntu 16.04 it configures openmano as a service"
  32     echo -e "  OPTIONS"
  33     echo -e "     -u USER:    database admin user. 'root' by default. Prompts if needed"
  34     echo -e "     -p PASS:    database admin password to be used or installed. Prompts if needed"
  35     echo -e "     -q --quiet: install in unattended mode"
  36     echo -e "     -h --help:  show this help"
  37     echo -e "     --develop:  install last version for developers, and do not configure as a service"
  38     echo -e "     --forcedb:  reinstall mano_db DB, deleting previous database if exists and creating a new one"
  39     echo -e "     --updatedb: do not reinstall mano_db DB if it exists, just update database"
  40     echo -e "     --force:    makes idenpotent, delete previous installations folders if needed. It assumes --updatedb if --forcedb option is not provided"
  41     echo -e "     --noclone:  assumes that openmano was cloned previously and that this script is run from the local repo"
  42     echo -e "     --no-install-packages: use this option to skip updating and installing the requires packages. This avoid wasting time if you are sure requires packages are present e.g. because of a previous installation"
  43     echo -e "     --no-db: do not install mysql server"
  44 }
  45
  46 function install_packages(){
  47     [ -x /usr/bin/apt-get ] && apt-get install -y $*
  48     [ -x /usr/bin/yum ]     && yum install     -y $*
  49
  50     #check properly installed
  51     for PACKAGE in $*
  52     do
  53         PACKAGE_INSTALLED="no"
  54         [ -x /usr/bin/apt-get ] && dpkg -l $PACKAGE            &>> /dev/null && PACKAGE_INSTALLED="yes"
  55         [ -x /usr/bin/yum ]     && yum list installed $PACKAGE &>> /dev/null && PACKAGE_INSTALLED="yes"
  56         if [ "$PACKAGE_INSTALLED" = "no" ]
  57         then
  58             echo "failed to install package '$PACKAGE'. Revise network connectivity and try again" >&2
  59             exit 1
  60        fi
  61     done
  62 }
  63
  64 function ask_user(){
  65     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
  66     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
  67     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
  68     read -e -p "$1" USER_CONFIRMATION
  69     while true ; do
  70         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
  71         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
  72         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
  73         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
  74         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
  75     done
  76 }
  77
  78 GIT_URL=https://osm.etsi.org/gerrit/osm/RO.git
  79 GIT_OVIM_URL=https://osm.etsi.org/gerrit/osm/openvim.git
  80 DBUSER="root"
  81 DBPASSWD=""
  82 DBPASSWD_PARAM=""
  83 QUIET_MODE=""
  84 DEVELOP=""
  85 DB_FORCE_UPDATE=""
  86 UPDATEDB=""
  87 FORCE=""
  88 NOCLONE=""
  89 NO_PACKAGES=""
  90 NO_DB=""
  91
  92 while getopts ":u:p:hiq-:" o; do
  93     case "${o}" in
  94         u)
  95             export DBUSER="$OPTARG"
  96             ;;
  97         p)
  98             export DBPASSWD="$OPTARG"
  99             export DBPASSWD_PARAM="-p$OPTARG"
 100             ;;
 101         q)
 102             export QUIET_MODE=yes
 103             export DEBIAN_FRONTEND=noninteractive
 104             ;;
 105         h)
 106             usage && exit 0
 107             ;;
 108         -)
 109             [ "${OPTARG}" == "help" ] && usage && exit 0
 110             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 111             [ "${OPTARG}" == "forcedb" ] && DB_FORCE_UPDATE="${DB_FORCE_UPDATE}--forcedb" && continue
 112             [ "${OPTARG}" == "updatedb" ] && DB_FORCE_UPDATE="${DB_FORCE_UPDATE}--updatedb" && continue
 113             [ "${OPTARG}" == "force" ]   &&  FORCE="y" && continue
 114             [ "${OPTARG}" == "noclone" ] && NOCLONE="y" && continue
 115             [ "${OPTARG}" == "quiet" ] && export QUIET_MODE=yes && export DEBIAN_FRONTEND=noninteractive && continue
 116             [ "${OPTARG}" == "no-install-packages" ] && export NO_PACKAGES=yes && continue
 117             [ "${OPTARG}" == "no-db" ] && NO_DB="y" && continue
 118             echo -e "Invalid option: '--$OPTARG'\nTry $0 --help for more information" >&2
 119             exit 1
 120             ;;
 121         \?)
 122             echo -e "Invalid option: '-$OPTARG'\nTry $0 --help for more information" >&2
 123             exit 1
 124             ;;
 125         :)
 126             echo -e "Option '-$OPTARG' requires an argument\nTry $0 --help for more information" >&2
 127             exit 1
 128             ;;
 129         *)
 130             usage >&2
 131             exit 1
 132             ;;
 133     esac
 134 done
 135
 136 if [ "$DB_FORCE_UPDATE" == "--forcedb--updatedb" ] || [ "$DB_FORCE_UPDATE" == "--updatedb--forcedb" ] ; then
 137     echo "Error: options --forcedb and --updatedb are mutually exclusive" >&2
 138     exit 1
 139 elif [ -n "$FORCE" ] && [ -z "$DB_FORCE_UPDATE" ] ; then
 140     DB_FORCE_UPDATE="--updatedb"
 141 fi
 142
 143 #check root privileges and non a root user behind
 144 [ "$USER" != "root" ] && echo "Needed root privileges" >&2 && exit 1
 145 if [[ -z "$SUDO_USER" ]] || [[ "$SUDO_USER" = "root" ]]
 146 then
 147     [[ -z $QUIET_MODE ]] && ! ask_user "Install in the root user (y/N)? " n  && echo "Cancelled" && exit 1
 148     export SUDO_USER=root
 149 fi
 150
 151 # Discover Linux distribution
 152 # try redhat type
 153 [ -f /etc/redhat-release ] && _DISTRO=$(cat /etc/redhat-release 2>/dev/null | cut  -d" " -f1)
 154 # if not assuming ubuntu type
 155 [ -f /etc/redhat-release ] || _DISTRO=$(lsb_release -is  2>/dev/null)
 156 if [ "$_DISTRO" == "Ubuntu" ]
 157 then
 158     _RELEASE=$(lsb_release -rs)
 159     if [[ ${_RELEASE%%.*} != 14 ]] && [[ ${_RELEASE%%.*} != 16 ]]
 160     then
 161         [[ -z $QUIET_MODE ]] &&
 162             ! ask_user "WARNING! Not tested Ubuntu version. Continue assuming a trusty (14.XX)' (y/N)? " n &&
 163             echo "Cancelled" && exit 1
 164         _RELEASE = 14
 165     fi
 166 elif [ "$_DISTRO" == "CentOS" ]
 167 then
 168     _RELEASE="7"
 169     if ! cat /etc/redhat-release | grep -q "7."
 170     then
 171         [[ -z $QUIET_MODE ]] &&
 172             ! ask_user "WARNING! Not tested CentOS version. Continue assuming a '$_RELEASE' type (y/N)? " n &&
 173             echo "Cancelled" && exit 1
 174     fi
 175 elif [ "$_DISTRO" == "Red" ]
 176 then
 177     _RELEASE="7"
 178     if ! cat /etc/redhat-release | grep -q "7."
 179     then
 180         [[ -z $QUIET_MODE ]] &&
 181             ! ask_user "WARNING! Not tested Red Hat OS version. Continue assuming a '$_RELEASE' type (y/N)? " n &&
 182             echo "Cancelled" && exit 1
 183     fi
 184 else  #[ "$_DISTRO" != "Ubuntu" -a "$_DISTRO" != "CentOS" -a "$_DISTRO" != "Red" ]
 185     _DISTRO_DISCOVER=$_DISTRO
 186     [ -x /usr/bin/apt-get ] && _DISTRO="Ubuntu" && _RELEASE="14"
 187     [ -x /usr/bin/yum ]     && _DISTRO="CentOS" && _RELEASE="7"
 188     [[ -z $QUIET_MODE ]] &&
 189         ! ask_user "WARNING! Not tested Linux distribution '$_DISTRO_DISCOVER '. Continue assuming a '$_DISTRO $_RELEASE' type (y/N)? " n &&
 190         echo "Cancelled" && exit 1
 191 fi
 192
 193 #check if installed as a service
 194 INSTALL_AS_A_SERVICE=""
 195 [[ "$_DISTRO" == "Ubuntu" ]] &&  [[ ${_RELEASE%%.*} == 16 ]] && [[ -z $DEVELOP ]] && INSTALL_AS_A_SERVICE="y"
 196
 197 # Next operations require knowing BASEFOLDER
 198 if [[ -z "$NOCLONE" ]]; then
 199     if [[ -n "$INSTALL_AS_A_SERVICE" ]] ; then
 200         BASEFOLDER=__openmano__${RANDOM}
 201     else
 202         BASEFOLDER="${PWD}/openmano"
 203     fi
 204     [[ -n "$FORCE" ]] && rm -rf $BASEFOLDER #make idempotent
 205 else
 206     HERE=$(dirname $(readlink -f ${BASH_SOURCE[0]}))
 207     BASEFOLDER=$(dirname $HERE)
 208 fi
 209
 210 if [[ -z "$NO_PACKAGES" ]]
 211 then
 212     echo -e "\n"\
 213         "#################################################################\n"\
 214         "#####        UPDATE REPOSITORIES                            #####\n"\
 215         "#################################################################"
 216     [ "$_DISTRO" == "Ubuntu" ] && apt-get update -y
 217
 218     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && yum check-update -y
 219     [ "$_DISTRO" == "CentOS" ] && sudo yum install -y epel-release
 220     [ "$_DISTRO" == "Red" ] && wget http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm \
 221         && sudo rpm -ivh epel-release-7-5.noarch.rpm && sudo yum install -y epel-release && rm -f epel-release-7-5.noarch.rpm
 222     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && sudo yum repolist
 223
 224     echo -e "\n"\
 225         "#################################################################\n"\
 226         "#####        INSTALL REQUIRED PACKAGES                      #####\n"\
 227         "#################################################################"
 228     [ "$_DISTRO" == "Ubuntu" ] && install_packages "git make screen wget mysql-client"
 229     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "git make screen wget mariadb-client"
 230
 231     echo -e "\n"\
 232         "#################################################################\n"\
 233         "#####        INSTALL PYTHON PACKAGES                        #####\n"\
 234         "#################################################################"
 235     [ "$_DISTRO" == "Ubuntu" ] && install_packages "python-yaml python-bottle python-mysqldb python-jsonschema python-paramiko python-argcomplete python-requests python-logutils libxml2-dev libxslt-dev python-dev python-pip"
 236     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "PyYAML MySQL-python python-jsonschema python-paramiko python-argcomplete python-requests python-logutils libxslt-devel libxml2-devel python-devel python-pip"
 237     # The only way to install python-bottle on Centos7 is with easy_install or pip
 238     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && easy_install -U bottle
 239
 240     # required for vmware connector TODO move that to separete opt in install script
 241     sudo pip install --upgrade pip
 242     sudo pip install pyvcloud
 243     sudo pip install progressbar
 244     sudo pip install prettytable
 245     sudo pip install pyvmomi
 246
 247     # required for AWS connector
 248     [ "$_DISTRO" == "Ubuntu" ] && install_packages "python-boto"
 249     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "python-boto"  #TODO check if at Centos it exists with this name, or PIP should be used
 250
 251     # install openstack client needed for using openstack as a VIM
 252     [ "$_DISTRO" == "Ubuntu" ] && install_packages "python-novaclient python-keystoneclient python-glanceclient python-neutronclient python-cinderclient"
 253     [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "python-devel" && easy_install python-novaclient python-keystoneclient python-glanceclient python-neutronclient python-cinderclient #TODO revise if gcc python-pip is needed
 254 fi  # [[ -z "$NO_PACKAGES" ]]
 255
 256 if [[ -z $NOCLONE ]]; then
 257     echo -e "\n"\
 258         "#################################################################\n"\
 259         "#####        DOWNLOAD SOURCE                                #####\n"\
 260         "#################################################################"
 261     if [[ -d "${BASEFOLDER}" ]] ; then
 262         if [[ -n "$FORCE" ]] ; then
 263             echo "deleting '${BASEFOLDER}' folder"
 264             rm -rf "$BASEFOLDER" #make idempotent
 265         elif [[ -z "$QUIET_MODE" ]] ; then
 266             ! ask_user "folder '${BASEFOLDER}' exists, overwrite (y/N)? " n && echo "Cancelled!" && exit 1
 267             rm -rf "$BASEFOLDER"
 268         else
 269             echo "'${BASEFOLDER}' folder exists. Use "--force" to overwrite" >&2 && exit 1
 270         fi
 271     fi
 272     su $SUDO_USER -c "git clone ${GIT_URL} ${BASEFOLDER}"
 273     su $SUDO_USER -c "cp ${BASEFOLDER}/.gitignore-common ${BASEFOLDER}/.gitignore"
 274     [[ -z $DEVELOP ]] && su $SUDO_USER -c "git -C ${BASEFOLDER} checkout v2.0"
 275 fi
 276
 277 echo -e "\n"\
 278     "#################################################################\n"\
 279     "#####        INSTALLING OVIM LIBRARY                        #####\n"\
 280     "#################################################################"
 281 su $SUDO_USER -c "git -C ${BASEFOLDER} clone ${GIT_OVIM_URL} openvim"
 282 [[ -z $DEVELOP ]] && su $SUDO_USER -c "git -C ${BASEFOLDER}/openvim checkout v2.0"
 283
 284 # Install debian dependencies before setup.py
 285 [ "$_DISTRO" == "Ubuntu" ] && install_packages "libmysqlclient-dev"
 286 [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "libmysqlclient-dev"  #TODO check if that's the name in CentOS and RedHat
 287 make -C ${BASEFOLDER}/openvim lite
 288 rm -rf "${BASEFOLDER}/openvim"
 289 OSMLIBOVIM_PATH=`python -c 'import lib_osm_openvim; print lib_osm_openvim.__path__[0]'`
 290
 291 if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ]
 292 then
 293     echo -e "\n"\
 294         "#################################################################\n"\
 295         "#####        CONFIGURE firewalld                            #####\n"\
 296         "#################################################################"
 297     if [[ -z $QUIET_MODE ]] || ask_user "Configure firewalld for openmanod port 9090 (Y/n)? " y
 298     then
 299         #Creates a service file for openmano
 300         echo '<?xml version="1.0" encoding="utf-8"?>
 301 <service>
 302  <short>openmanod</short>
 303  <description>openmanod service</description>
 304  <port protocol="tcp" port="9090"/>
 305 </service>' > /etc/firewalld/services/openmanod.xml
 306         #put proper permissions
 307         pushd /etc/firewalld/services > /dev/null
 308         restorecon openmanod.xml
 309         chmod 640 openmanod.xml
 310         popd > /dev/null
 311         #Add the openmanod service to the default zone permanently and reload the firewall configuration
 312         firewall-cmd --permanent --add-service=openmanod > /dev/null
 313         firewall-cmd --reload > /dev/null
 314         echo "done."
 315     else
 316         echo "skipping."
 317     fi
 318 fi
 319
 320 echo -e "\n"\
 321     "#################################################################\n"\
 322     "#####        CONFIGURE OPENMANO CLIENT                      #####\n"\
 323     "#################################################################"
 324 #creates a link at ~/bin if not configured as a service
 325 if [[ -z "$INSTALL_AS_A_SERVICE" ]]
 326 then
 327     su $SUDO_USER -c 'mkdir -p ${HOME}/bin'
 328     su $SUDO_USER -c 'rm -f ${HOME}/bin/openmano'
 329     su $SUDO_USER -c 'rm -f ${HOME}/bin/openmano-report'
 330     su $SUDO_USER -c 'rm -f ${HOME}/bin/service-openmano'
 331     su $SUDO_USER -c "ln -s '${BASEFOLDER}/openmano' "'${HOME}/bin/openmano'
 332     su $SUDO_USER -c "ln -s '${BASEFOLDER}/scripts/openmano-report.sh'   "'${HOME}/bin/openmano-report'
 333     su $SUDO_USER -c "ln -s '${BASEFOLDER}/scripts/service-openmano'  "'${HOME}/bin/service-openmano'
 334
 335     #insert /home/<user>/bin in the PATH
 336     #skiped because normally this is done authomatically when ~/bin exists
 337     #if ! su $SUDO_USER -c 'echo $PATH' | grep -q "${HOME}/bin"
 338     #then
 339     #    echo "    inserting /home/$SUDO_USER/bin in the PATH at .bashrc"
 340     #    su $SUDO_USER -c 'echo "PATH=\$PATH:\${HOME}/bin" >> ~/.bashrc'
 341     #fi
 342
 343     if [[ $SUDO_USER == root ]]
 344     then
 345         if ! echo $PATH | grep -q "${HOME}/bin"
 346         then
 347             echo "PATH=\$PATH:\${HOME}/bin" >> ${HOME}/.bashrc
 348         fi
 349     fi
 350 fi
 351
 352 #configure arg-autocomplete for this user
 353 #in case of minimal instalation this package is not installed by default
 354 [[ "$_DISTRO" == "CentOS" || "$_DISTRO" == "Red" ]] && yum install -y bash-completion
 355 #su $SUDO_USER -c 'mkdir -p ~/.bash_completion.d'
 356 su $SUDO_USER -c 'activate-global-python-argcomplete --user'
 357 if ! su  $SUDO_USER -c 'grep -q bash_completion.d/python-argcomplete.sh ${HOME}/.bashrc'
 358 then
 359     echo "    inserting .bash_completion.d/python-argcomplete.sh execution at .bashrc"
 360     su $SUDO_USER -c 'echo ". ${HOME}/.bash_completion.d/python-argcomplete.sh" >> ~/.bashrc'
 361 fi
 362
 363 if [ -z "$NO_DB" ]; then
 364     echo -e "\n"\
 365         "#################################################################\n"\
 366         "#####               INSTALL DATABASE SERVER                 #####\n"\
 367         "#################################################################"
 368
 369     if [ -n "$QUIET_MODE" ]; then
 370         DB_QUIET='-q'
 371     fi
 372     ${BASEFOLDER}/database_utils/install-db-server.sh -U $DBUSER ${DBPASSWD_PARAM/p/P} $DB_QUIET $DB_FORCE_UPDATE || exit 1
 373     echo -e "\n"\
 374         "#################################################################\n"\
 375         "#####        CREATE AND INIT MANO_VIM DATABASE              #####\n"\
 376         "#################################################################"
 377     # Install mano_vim_db after setup
 378     ${OSMLIBOVIM_PATH}/database_utils/install-db-server.sh -U $DBUSER ${DBPASSWD_PARAM/p/P} -u mano -p manopw -d mano_vim_db --no-install-packages $DB_QUIET $DB_FORCE_UPDATE || exit 1
 379 fi   # [ -z "$NO_DB" ]
 380
 381 if [[ -n "$INSTALL_AS_A_SERVICE"  ]]
 382 then
 383     echo -e "\n"\
 384         "#################################################################\n"\
 385         "#####        CONFIGURE OPENMANO SERVICE                     #####\n"\
 386         "#################################################################"
 387
 388     ${BASEFOLDER}/scripts/install-openmano-service.sh -f ${BASEFOLDER} `[[ -z "$NOCLONE" ]] && echo "-d"`
 389     # rm -rf ${BASEFOLDER}
 390     # alias service-openmano="service openmano"
 391     # echo 'alias service-openmano="service openmano"' >> ${HOME}/.bashrc
 392     echo
 393     echo "Done!  installed at /opt/openmano"
 394     echo " Manage server with 'sudo service osm-ro start|stop|status|...' "
 395 else
 396     echo
 397     echo "Done!  you may need to logout and login again for loading client configuration"
 398     echo " Run './${BASEFOLDER}/scripts/service-openmano start' for starting openmano in a screen"
 399 fi