# contact with: nfvlabs@tid.es
##
-# Authors: Antonio Lopez, Pablo Montes, Alfonso Tierno
+# Authors: Antonio Lopez, Pablo Montes, Alfonso Tierno, Leonardo Mirabal
# June 2015
# Personalize RHEL7.1 on compute nodes
# @base, @core, @development, @network-file-system-client, @virtualization-hypervisor, @virtualization-platform, @virtualization-tools
+
function usage(){
- echo -e "Usage: sudo $0 [-y] <user-name> [ <iface-name> [<ip-address>|dhcp] ]"
+ echo -e "Usage: sudo $0 [-f] <user-name> [<iface-for-overlay-bridges>]"
echo -e " Configure compute host for VIM usage. (version 0.4). Params:"
- echo -e " -y do not prompt for confirmation. If a new user is created, the user name is set as password"
+ echo -e " -f do not prompt for confirmation. If a new user is created, the user name is set as password"
echo -e " <user-name> Create if not exist and configure this user for openvim to connect"
- echo -e " <iface-name> if suplied creates bridge interfaces on this interface, needed for openvim"
- echo -e " ip or dhcp if suplied, configure the interface with this ip address (/24) or 'dhcp' "
+ echo -e " [<iface-for-overlay-bridges>] Only needed for old openvim versions. Iface to create pre-provioned bridges for network conectivity"
+
}
#1.2 input parameters
FORCE=""
-while getopts "y" o; do
+while getopts "f" o; do
case "${o}" in
- y)
+ f)
FORCE="yes"
;;
*)
user_name=$1
interface=$2
-ip_iface=$3
-if [ -n "$interface" ] && ! ifconfig $interface &> /dev/null
+
+if [ -z $interface ] && ! ifconfig $interface &> /dev/null
then
echo "Error: interface '$interface' is not present in the system"
usage
#################################################################'
# Required packages
-apt-get -y update
-#apt-get -y install grub-common screen virt-manager ethtool build-essential x11-common x11-utils x11-apps libguestfs-tools hwloc libguestfs-tools numactl vlan nfs-common nfs-kernel-server
-apt-get -y install grub-common screen virt-manager ethtool build-essential x11-common x11-utils libguestfs-tools hwloc libguestfs-tools numactl vlan nfs-common nfs-kernel-server
-
+apt-get -y update
+apt-get -y install grub-common screen virt-manager ethtool build-essential x11-common x11-utils \
+ libguestfs-tools hwloc libguestfs-tools numactl vlan nfs-common nfs-kernel-server openvswitch-switch
echo "Remove unneeded packages....."
apt-get -y autoremove
# Selinux management
#yum install -y policycoreutils-python
-
-
echo '
#################################################################
##### INSTALL USER #####
fi
fi
-## Allow admin users to access without password
-#if ! grep -q "#openmano" /etc/sudoers
-#then
-# cat >> /home/${user_name}/script_visudo.sh << EOL
-##!/bin/bash
-#cat \$1 | awk '(\$0~"requiretty"){print "#"\$0}(\$0!~"requiretty"){print \$0}' > tmp
-#cat tmp > \$1
-#rm tmp
-#echo "" >> \$1
-#echo "#openmano allow to group admin to grant root privileges without password" >> \$1
-#echo "%admin ALL=(ALL) NOPASSWD: ALL" >> \$1
-#EOL
-# chmod +x /home/${user_name}/script_visudo.sh
-# echo "allowing admin user to get root privileges withut password"
-# export EDITOR=/home/${user_name}/script_visudo.sh && sudo -E visudo
-# rm -f /home/${user_name}/script_visudo.sh
-#fi
-
+# Allow admin users to access without password
+if ! grep -q "#openmano" /etc/sudoers
+then
+ cat >> /home/${user_name}/script_visudo.sh << EOL
+#!/bin/bash
+echo "#openmano allow to group admin to grant root privileges without password" >> \$1
+echo "${user_name} ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers
+EOL
+ chmod +x /home/${user_name}/script_visudo.sh
+ echo "allowing admin user to get root privileges withut password"
+ export EDITOR=/home/${user_name}/script_visudo.sh && sudo -E visudo
+ rm -f /home/${user_name}/script_visudo.sh
+fi
echo '
#################################################################
if [ -n "$interface" ]
then
-
- # For management and data interfaces
- rm -f /etc/udev/rules.d/pci_config.rules # it will be created to define VFs
+ # For management and data interfaces
+ rm -f /etc/udev/rules.d/pci_config.rules # it will be created to define VFs
- # Set ONBOOT=on and MTU=9000 on the interface used for the bridges
- echo "configuring iface $interface"
+ # Set ONBOOT=on and MTU=9000 on the interface used for the bridges
+ echo "configuring iface $interface"
-#MTU for interfaces and bridges
-MTU=9000
+ #MTU for interfaces and bridges
+ MTU=9000
-cp /etc/network/interfaces interfaces.tmp
-
-
- #Create infrastructure bridge, normally used for connecting to compute nodes, openflow controller, ...
+ cp /etc/network/interfaces interfaces.tmp
+ #Create infrastructure bridge, normally used for connecting to compute nodes, openflow controller, ...
#Create VLAN for infrastructure bridge
- echo "
+echo "
######### CUTLINE #########
auto ${interface}
iface ${interface} inet manual
- post-up ip link set dev ${interface} mtu ${MTU}
+post-up ip link set dev ${interface} mtu ${MTU}
auto ${interface}.1001
iface ${interface}.1001 inet manual
- vlan-raw-device ${interface}
- post-up ip link set mtu $MTU dev ${interface}.1001
+vlan-raw-device ${interface}
+post-up ip link set mtu $MTU dev ${interface}.1001
" >> interfaces.tmp
-# echo "ifconfig ${interface} mtu $MTU
-# ifconfig ${interface} up
-#" > mtu.tmp
+ # echo "ifconfig ${interface} mtu $MTU
+ # ifconfig ${interface} up
+ #" > mtu.tmp
- #Create bridge interfaces
- echo "Creating bridge ifaces: "
- for ((i=1;i<=20;i++))
- do
- i2digits=$i
- [ $i -lt 10 ] && i2digits="0$i"
- echo " virbrMan$i vlan 20$i2digits"
+ #Create bridge interfaces
+ echo "Creating bridge ifaces: "
+ for ((i=1;i<=20;i++))
+ do
+ i2digits=$i
+ [ $i -lt 10 ] && i2digits="0$i"
+ echo " virbrMan$i vlan 20$i2digits"
- j=$i
+ j=$i
- echo "
+echo "
auto ${interface}.20$i2digits
iface ${interface}.20$i2digits inet manual
- post-up ip link set mtu $MTU dev ${interface}.20$i2digits
+vlan-raw-device ${interface}
+post-up ip link set mtu $MTU dev ${interface}.20$i2digits
auto virbrMan$j
iface virbrMan$j inet manual
- bridge_ports ${interface}.20$i2digits
- post-up ip link set dev virbrMan$j && ip link set mtu 9000 dev virbrMan$j
+bridge_ports ${interface}.20$i2digits
+post-up ip link set dev virbrMan$j && ip link set mtu $MTU dev virbrMan$j
" >> interfaces.tmp
-# echo "ifconfig ${interface}.20$i2digits mtu $MTU
-#ifconfig virbrMan$j mtu $MTU
-#ifconfig virbrMan$j up
-#" >> mtu.tmp
+ done
- done
+ # echo "ifconfig em2.1001 mtu $MTU
+ #ifconfig virbrInf mtu $MTU
+ #ifconfig virbrInf up
+ #" >> mtu.tmp
- echo "
-auto em2.1001
-iface em2.1001 inet manual
- post-up ip link set dev em2.1001 mtu 9000
-
-auto virbrInf
-iface virbrInf inet manual
- bridge_ports em2.1001
- post-up ip link set dev virbrInf && ip link set mtu 9000 dev virbrInf
-" >> interfaces.tmp
-
-# echo "ifconfig em2.1001 mtu $MTU
-#ifconfig virbrInf mtu $MTU
-#ifconfig virbrInf up
-#" >> mtu.tmp
-
-if ! grep -q "#### CUTLINE ####" /etc/network/interfaces
-then
- echo "====== Copying interfaces.tmp to /etc/network/interfaces"
- cp interfaces.tmp /etc/network/interfaces
-fi
+ if ! grep -q "#### CUTLINE ####" /etc/network/interfaces
+ then
+ echo "====== Copying interfaces.tmp to /etc/network/interfaces"
+ cp interfaces.tmp /etc/network/interfaces
+ fi
#popd
fi
-
-# Activate 8 Virtual Functions per PF on Niantic cards (ixgbe driver)
+################### Activate 8 Virtual Functions per PF on Niantic cards (ixgbe driver)
if [[ `lsmod | cut -d" " -f1 | grep "ixgbe" | grep -v vf` ]]
-then
- if ! grep -q "ixgbe" /etc/modprobe.d/ixgbe.conf
- then
- echo "options ixgbe max_vfs=8" >> /etc/modprobe.d/ixgbe.conf
- fi
+ then
+ if ! grep -q "ixgbe" /etc/modprobe.d/ixgbe.conf
+ then
+ echo "options ixgbe max_vfs=8" >> /etc/modprobe.d/ixgbe.conf
+ fi
-fi
+ fi
echo "#!/bin/bash" > /etc/activate-vfs.sh
chmod +x /etc/activate-vfs.sh
#fi
chmod a+rwx /var/lib/libvirt/images
-mkdir /usr/libexec/
+mkdir -p /usr/libexec/
pushd /usr/libexec/
ln -s /usr/bin/qemu-system-x86_64 qemu-kvm
popd
projects / osm / openvim.git / commitdiff