--- /dev/null
+#!/bin/bash
+
+##
+# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
+# This file is part of openmano
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+# For those usages not covered by the Apache License, Version 2.0 please
+# contact with: nfvlabs@tid.es
+##
+
+# Authors: Antonio Lopez, Pablo Montes, Alfonso Tierno
+# 2016 March 18
+# Modified to run on grub2 and efi boot
+
+# Personalize RHEL7.2 on compute nodes
+# Prepared to work with the following network card drivers:
+# tg3, igb drivers for management interfaces
+# ixgbe (Intel Niantic) and i40e (Intel Fortville) drivers for data plane interfaces
+
+# To download:
+# wget https://raw.githubusercontent.com/nfvlabs/openmano/master/scripts/configure-compute-node-RHEL7.1.sh
+# To execute:
+# chmod +x ./configure-compute-node-RHEL7.1.sh
+# sudo ./configure-compute-node-RHEL7.1.sh <user> <iface>
+
+# Assumptions:
+# All virtualization options activated on BIOS (vt-d, vt-x, SR-IOV, no power savings...)
+# RHEL7.2 installed without /home partition and with the following packages selection:
+# @base, @core, @development, @network-file-system-client, @virtualization-hypervisor, @virtualization-platform, @virtualization-tools
+
+# 2016 Aug 17 Antonio López
+# Changed virbrInf to virbrVIM, to reflect that this bridge is used to communicate with the VIM (OpenVIM)
+# Changed the vlan tag used by virbrVIM from 2000 to 1100
+
+function usage(){
+ echo -e "Usage: sudo $0 [-y] <user-name> [ <iface-name> [<ip-address>|dhcp] ]"
+ echo -e " Configure compute host for VIM usage. (version 0.4). Params:"
+ echo -e " -y do not prompt for confirmation. If a new user is created, the user name is set as password"
+ echo -e " <user-name> Create if not exist and configure this user for openvim to connect"
+ echo -e " <iface-name> if suplied creates bridge interfaces on this interface, needed for openvim"
+ echo -e " ip or dhcp if suplied, configure the interface with this ip address (/24) or 'dhcp' "
+}
+
+
+#1 CHECK input parameters
+#1.1 root privileges
+[ "$USER" != "root" ] && echo "Needed root privileges" && usage && exit -1
+
+#1.2 input parameters
+FORCE=""
+while getopts "y" o; do
+ case "${o}" in
+ y)
+ FORCE="yes"
+ ;;
+ *)
+ usage
+ exit -1
+ ;;
+ esac
+done
+shift $((OPTIND-1))
+
+
+if [ $# -lt 1 ]
+then
+ usage
+ exit
+fi
+
+user_name=$1
+interface=$2
+ip_iface=$3
+
+if [ -n "$interface" ] && ! ifconfig $interface &> /dev/null
+then
+ echo "Error: interface '$interface' is not present in the system"
+ usage
+ exit 1
+fi
+
+echo '
+#################################################################
+##### INSTALL NEEDED PACKETS #####
+#################################################################'
+
+# Required packages
+yum repolist
+yum check-update
+yum update -y
+yum install -y screen virt-manager ethtool gcc gcc-c++ xorg-x11-xauth xorg-x11-xinit xorg-x11-deprecated-libs libXtst guestfish hwloc libhugetlbfs-utils libguestfs-tools numactl
+# Selinux management
+yum install -y policycoreutils-python
+
+echo '
+#################################################################
+##### INSTALL USER #####
+#################################################################'
+
+# Add required groups
+groupadd -f nfvgroup
+groupadd -f libvirt #for other operating systems may be libvirtd
+
+# Adds user, default password same as name
+if grep -q "^${user_name}:" /etc/passwd
+then
+ #user exist, add to group
+ echo "adding user ${user_name} to groups libvirt,nfvgroup"
+ usermod -a -G libvirt,nfvgroup -g nfvgroup $user_name
+else
+ #create user if it does not exist
+ [ -z "$FORCE" ] && read -p "user '${user_name}' does not exist, create (Y/n)" kk
+ if ! [ -z "$kk" -o "$kk"="y" -o "$kk"="Y" ]
+ then
+ exit
+ fi
+ echo "creating and configuring user ${user_name}"
+ useradd -m -G libvirt,nfvgroup -g nfvgroup $user_name
+ #Password
+ if [ -z "$FORCE" ]
+ then
+ echo "Provide a password for $user_name"
+ passwd $user_name
+ else
+ echo -e "$user_name\n$user_name" | passwd --stdin $user_name
+ fi
+fi
+
+#Setting default libvirt URI for the user
+echo "Setting default libvirt URI for the user"
+echo "if test -x `which virsh`; then" >> /home/${user_name}/.bash_profile
+echo " export LIBVIRT_DEFAULT_URI=qemu:///system" >> /home/${user_name}/.bash_profile
+echo "fi" >> /home/${user_name}/.bash_profile
+
+echo '
+#################################################################
+##### INSTALL HUGEPAGES ISOLCPUS GRUB #####
+#################################################################'
+
+# Huge pages 1G auto mount
+mkdir -p /mnt/huge
+if ! grep -q "Huge pages" /etc/fstab
+then
+ echo "" >> /etc/fstab
+ echo "# Huge pages" >> /etc/fstab
+ echo "nodev /mnt/huge hugetlbfs pagesize=1GB 0 0" >> /etc/fstab
+ echo "" >> /etc/fstab
+fi
+
+# Huge pages reservation service
+if ! [ -f /usr/lib/systemd/system/hugetlb-gigantic-pages.service ]
+then
+ echo "configuring huge pages service"
+ cat > /usr/lib/systemd/system/hugetlb-gigantic-pages.service << EOL
+[Unit]
+Description=HugeTLB Gigantic Pages Reservation
+DefaultDependencies=no
+Before=dev-hugepages.mount
+ConditionPathExists=/sys/devices/system/node
+ConditionKernelCommandLine=hugepagesz=1G
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=/usr/lib/systemd/hugetlb-reserve-pages
+
+[Install]
+WantedBy=sysinit.target
+EOL
+fi
+# Grub virtualization options:
+
+# Get isolcpus
+isolcpus=`gawk 'BEGIN{pre=-2;}
+ ($1=="processor"){pro=$3;}
+ ($1=="core" && $4!=0){
+ if (pre+1==pro){endrange="-" pro}
+ else{cpus=cpus endrange sep pro; sep=","; endrange="";};
+ pre=pro;}
+ END{printf("%s",cpus endrange);}' /proc/cpuinfo`
+
+
+# Huge pages reservation file: reserving all memory apart from 4GB per NUMA node
+# Get the number of hugepages: all memory but 8GB reserved for the OS
+#totalmem=`dmidecode --type 17|grep Size |grep MB |gawk '{suma+=$2} END {print suma/1024}'`
+#hugepages=$(($totalmem-8))
+
+if ! [ -f /usr/lib/systemd/hugetlb-reserve-pages ]
+then
+ cat > /usr/lib/systemd/hugetlb-reserve-pages << EOL
+#!/bin/bash
+nodes_path=/sys/devices/system/node/
+if [ ! -d \$nodes_path ]; then
+ echo "ERROR: \$nodes_path does not exist"
+ exit 1
+fi
+
+reserve_pages()
+{
+ echo \$1 > \$nodes_path/\$2/hugepages/hugepages-1048576kB/nr_hugepages
+}
+
+# This example reserves all available memory apart from 4 GB for linux
+# using 1GB size. You can modify it to your needs or comment the lines
+# to avoid reserve memory in a numa node
+EOL
+ for f in /sys/devices/system/node/node?/meminfo
+ do
+ node=`head -n1 $f | gawk '($5=="kB"){print $2}'`
+ memory=`head -n1 $f | gawk '($5=="kB"){print $4}'`
+ memory=$((memory+1048576-1)) #memory must be ceiled
+ memory=$((memory/1048576)) #from `kB to GB
+ #if memory
+ [ $memory -gt 4 ] && echo "reserve_pages $((memory-4)) node$node" >> /usr/lib/systemd/hugetlb-reserve-pages
+ done
+
+ # Run the following commands to enable huge pages early boot reservation:
+ chmod +x /usr/lib/systemd/hugetlb-reserve-pages
+ systemctl enable hugetlb-gigantic-pages
+fi
+
+# Prepares the text to add at the end of the grub line, including blacklisting ixgbevf driver in the host
+
+textokernel="intel_iommu=on default_hugepagesz=1G hugepagesz=1G isolcpus=$isolcpus modprobe.blacklist=ixgbevf modprobe.blacklist=i40evf"
+
+# Add text to the kernel line
+if ! grep -q "intel_iommu=on default_hugepagesz=1G hugepagesz=1G" /etc/default/grub
+then
+ echo "adding cmdline ${textokernel}"
+ sed -i "/^GRUB_CMDLINE_LINUX=/s/\"\$/ ${textokernel}\"/" /etc/default/grub
+
+ # grub2 upgrade
+
+ # BIOS based systems
+ grub2-mkconfig -o /boot/grub2/grub.cfg
+
+ # UEFI based systems
+ grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
+
+fi
+
+echo '
+#################################################################
+##### OTHER CONFIGURATION #####
+#################################################################'
+
+# Disable requiretty
+if ! grep -q "#openmano" /etc/sudoers
+then
+ cat >> /home/${user_name}/script_visudo.sh << EOL
+#!/bin/bash
+cat \$1 | awk '(\$0~"requiretty"){print "#"\$0}(\$0!~"requiretty"){print \$0}' > tmp
+cat tmp > \$1
+rm tmp
+EOL
+ chmod +x /home/${user_name}/script_visudo.sh
+ echo "Disabling requitetty"
+ export EDITOR=/home/${user_name}/script_visudo.sh && sudo -E visudo
+ rm -f /home/${user_name}/script_visudo.sh
+fi
+
+#Configure polkint to run virsh as a normal user
+echo "Configuring polkint to run virsh as a normal user"
+cat >> /etc/polkit-1/localauthority/50-local.d/50-org.libvirt-access.pkla << EOL
+[libvirt Admin Access]
+Identity=unix-group:libvirt
+Action=org.libvirt.unix.manage
+ResultAny=yes
+ResultInactive=yes
+ResultActive=yes
+EOL
+
+# Links the OpenMANO required folder /opt/VNF/images to /var/lib/libvirt/images. The OS installation
+# should have only a / partition with all possible space available
+
+echo " link /opt/VNF/images to /var/lib/libvirt/images"
+if [ "$user_name" != "" ]
+then
+ #mkdir -p /home/${user_name}/VNF_images
+ #chown -R ${user_name}:nfvgroup /home/${user_name}/VNF_images
+ #chmod go+x $HOME
+
+ # The orchestator needs to link the images folder
+ rm -f /opt/VNF/images
+ mkdir -p /opt/VNF/
+ ln -s /var/lib/libvirt/images /opt/VNF/images
+ chown -R ${user_name}:nfvgroup /opt/VNF
+ chown -R root:nfvgroup /var/lib/libvirt/images
+ chmod g+rwx /var/lib/libvirt/images
+
+ # Selinux management
+ #echo "configure Selinux management"
+ #semanage fcontext -a -t virt_image_t "/home/${user_name}/VNF_images(/.*)?"
+ #cat /etc/selinux/targeted/contexts/files/file_contexts.local |grep virt_image
+ #restorecon -R -v /home/${user_name}/VNF_images
+else
+ mkdir -p /opt/VNF/images
+ chmod o+rx /opt/VNF/images
+fi
+
+echo "creating local information /opt/VNF/images/hostinfo.yaml"
+echo "#By default openvim assumes control plane interface naming as em1,em2,em3,em4 " > /opt/VNF/images/hostinfo.yaml
+echo "#and bridge ifaces as virbrMan1, virbrMan2, ..." >> /opt/VNF/images/hostinfo.yaml
+echo "#if compute node contain a different name it must be indicated in this file" >> /opt/VNF/images/hostinfo.yaml
+echo "#with the format extandard-name: compute-name" >> /opt/VNF/images/hostinfo.yaml
+if [ "$interface" != "" -a "$interface" != "em1" ]
+then
+ echo "iface_names:" >> /opt/VNF/images/hostinfo.yaml
+ echo " em1: ${interface}" >> /opt/VNF/images/hostinfo.yaml
+fi
+chmod o+r /opt/VNF/images/hostinfo.yaml
+
+# deactivate memory overcommit
+echo "deactivate memory overcommit"
+service ksmtuned stop
+service ksm stop
+chkconfig ksmtuned off
+chkconfig ksm off
+
+
+# Libvirt options (uncomment the following)
+echo "configure Libvirt options"
+sed -i 's/#unix_sock_group = "libvirt"/unix_sock_group = "libvirt"/' /etc/libvirt/libvirtd.conf
+sed -i 's/#unix_sock_rw_perms = "0770"/unix_sock_rw_perms = "0770"/' /etc/libvirt/libvirtd.conf
+sed -i 's/#unix_sock_dir = "\/var\/run\/libvirt"/unix_sock_dir = "\/var\/run\/libvirt"/' /etc/libvirt/libvirtd.conf
+sed -i 's/#auth_unix_rw = "none"/auth_unix_rw = "none"/' /etc/libvirt/libvirtd.conf
+
+#creating the polkit grant access for libvirt user.
+#This does not work !!!! so commented. No way to get running without uncomented the auth_unix_rw = "none" line
+#
+#cat > /etc/polkit-1/localauthority/50-local.d/50-org.example-libvirt-remote-access.pkla << EOL
+#[libvirt Management Access]
+# Identity=unix-user:n2;unix-user:kk
+# Action=org.libvirt.unix.manage
+# ResultAny=yes
+# ResultInactive=yes
+# ResultActive=yes
+#EOL
+
+# Configuration change of qemu for the numatune bug issue
+# RHEL7.1: for this version should not be necesary - to revise
+#if ! grep -q "cgroup_controllers = [ \"cpu\", \"devices\", \"memory\", \"blkio\", \"cpuacct\" ]" /etc/libvirt/qemu.conf
+#then
+#cat /etc/libvirt/qemu.conf | awk '{print $0}($0~"#cgroup_controllers"){print "cgroup_controllers = [ \"cpu\", \"devices\", \"memory\", \"blkio\", \"cpuacct\" ]"}' > tmp
+#mv tmp /etc/libvirt/qemu.conf
+#fi
+
+echo '
+#################################################################
+##### NETWORK CONFIGURATION #####
+#################################################################'
+# Network config (if the second parameter is net)
+if [ -n "$interface" ]
+then
+
+ # Deactivate network manager
+ systemctl stop NetworkManager
+ systemctl disable NetworkManager
+
+ # For management and data interfaces
+ #rm -f /etc/udev/rules.d/pci_config.rules # it will be created to define VFs
+
+ pushd /etc/sysconfig/network-scripts/
+
+ # Set ONBOOT=on and MTU=9000 on the interface used for the bridges
+ echo "configuring iface $interface"
+ cat ifcfg-$interface | grep -e HWADDR -e UUID > $interface.tmp
+ echo "TYPE=Ethernet
+NAME=$interface
+DEVICE=$interface
+TYPE=Ethernet
+ONBOOT=yes
+NM_CONTROLLED=no
+MTU=9000
+BOOTPROTO=none
+IPV6INIT=no" >> $interface.tmp
+ mv $interface.tmp ifcfg-$interface
+
+ # Management interfaces
+# integrated_interfaces=""
+# nb_ifaces=0
+# for iface in `ifconfig -a | grep ":\ " | cut -f 1 -d":"| grep -v "_" | grep -v "\." | grep -v "lo" | sort`
+# do
+# driver=`ethtool -i $iface| awk '($0~"driver"){print $2}'`
+# if [ $driver != "ixgbe" ] && [ $driver != "bridge" ]
+# then
+# integrated_interfaces="$integrated_interfaces $iface"
+# nb_ifaces=$((nb_ifaces+1))
+# eval iface${nb_ifaces}=$iface
+# fi
+# done
+
+ #Create infrastructure bridge, normally used for connecting to compute nodes, openflow controller, ...
+ echo "DEVICE=virbrVIM
+NAME=virbrVIM
+TYPE=Bridge
+ONBOOT=yes
+DELAY=0
+NM_CONTROLLED=no
+MTU=9000
+USERCTL=no" > ifcfg-virbrVIM
+[[ $ip_iface != "dhcp" ]] && [[ $ip_iface != "" ]] && echo -e "BOOTPROTO=static\nIPADDR=${ip_iface}\nNETMASK=255.255.255.0" >> ifcfg-virbrVIM
+
+ #Create VLAN for infrastructure bridge
+ echo "DEVICE=${interface}.1100
+NAME=${interface}.1100
+ONBOOT=yes
+NM_CONTROLLED=no
+USERCTL=no
+VLAN=yes
+MTU=9000
+BOOTPROTO=none
+BRIDGE=virbrVIM" > ifcfg-${interface}.1100
+
+
+ #Create bridge interfaces
+ echo "Creating bridge ifaces: "
+ for ((i=1;i<=20;i++))
+ do
+ i2digits=$i
+ [ $i -lt 10 ] && i2digits="0$i"
+ echo " virbrMan$i vlan 20$i2digits"
+ echo "DEVICE=virbrMan$i
+NAME=virbrMan$i
+TYPE=Bridge
+ONBOOT=yes
+DELAY=0
+NM_CONTROLLED=no
+MTU=9000
+USERCTL=no" > ifcfg-virbrMan$i
+
+#Without IP:
+#BOOTPROTO=static
+#IPADDR=10.10.10.$((i+209))
+#NETMASK=255.255.255.0" > ifcfg-virbrMan$i
+
+ # create the required interfaces to connect the bridges
+ echo "DEVICE=${interface}.20$i2digits
+NAME=${interface}.20$i2digits
+ONBOOT=yes
+NM_CONTROLLED=no
+USERCTL=no
+VLAN=yes
+BOOTPROTO=none
+MTU=9000
+BRIDGE=virbrMan$i" > ifcfg-${interface}.20$i2digits
+ done
+
+ iface=$interface
+ if [ -n "$ip_iface" ]
+ then
+ echo "configuring iface $iface interface with ip $ip_iface"
+ # Network interfaces
+ # 1Gbps interfaces are configured with ONBOOT=yes and static IP address
+ cat ifcfg-$iface | grep -e HWADDR -e UUID > $iface.tmp
+ echo "TYPE=Ethernet
+NAME=$iface
+DEVICE=$iface
+TYPE=Ethernet
+ONBOOT=yes
+NM_CONTROLLED=no
+MTU=9000
+IPV6INIT=no" >> $iface.tmp
+ [ $ip_iface = "dhcp" ] && echo -e "BOOTPROTO=dhcp\nDHCP_HOSTNAME=$HOSTNAME" >> $iface.tmp
+ [ $ip_iface != "dhcp" ] && echo -e "BOOTPROTO=static\nIPADDR=${ip_iface}\nNETMASK=255.255.255.0" >> $iface.tmp
+ mv $iface.tmp ifcfg-$iface
+ fi
+ # Script to create vfs
+ echo "#!/bin/bash" > /root/activate-vfs.sh
+ chmod +x /root/activate-vfs.sh
+ for iface in `ifconfig -a | grep ": " | cut -f 1 -d":" | grep -v -e "_" -e "\." -e "lo" -e "virbr" -e "tap"`
+ do
+ # 10/40 Gbps interfaces
+ # Intel X520 cards: driver ixgbe
+ # Intel XL710 Fortville cards: driver i40e
+ driver=`ethtool -i $iface| awk '($0~"driver"){print $2}'`
+ if [ "$driver" = "i40e" -o "$driver" = "ixgbe" ]
+ then
+ echo "configuring dataplane iface $iface"
+
+ # Create 8 SR-IOV per PF by udev rules only for Fortville cards (i40e driver)
+ if [ "$driver" = "i40e" ]
+ then
+ pci=`ethtool -i $iface | awk '($0~"bus-info"){print $2}'`
+ echo "echo 8 > /sys/bus/pci/devices/$pci/sriov_numvfs" >> /root/activate-vfs.sh
+ fi
+
+ # Configure PF to boot automatically and to have a big MTU
+ # 10Gbps interfaces are configured with ONBOOT=yes and MTU=2000
+ cat ifcfg-$iface | grep -e HWADDR -e UUID > $iface.tmp
+ echo "TYPE=Ethernet
+NAME=$iface
+DEVICE=$iface
+ONBOOT=yes
+MTU=9000
+NM_CONTROLLED=no
+IPV6INIT=no
+BOOTPROTO=none" >> $iface.tmp
+ mv $iface.tmp ifcfg-$iface
+ fi
+ done
+ popd
+fi
+# add entry in rc.local for activate-vfs
+grep -q 'touch /var/lock/subsys/local' '/etc/rc.d/rc.local'
+if [[ $? == 0 ]]
+then
+ echo "/root/activate-vfs.sh" >> /etc/rc.local
+fi
+
+
+
+# Activate 8 Virtual Functions per PF on Niantic cards (ixgbe driver)
+if [[ `lsmod | cut -d" " -f1 | grep "ixgbe" | grep -v vf` ]]
+then
+ if ! grep -q "ixgbe" /etc/modprobe.d/ixgbe.conf
+ then
+ echo "options ixgbe max_vfs=8" >> /etc/modprobe.d/ixgbe.conf
+ fi
+
+fi
+
+# Executes dracut to load drivers on boot
+echo "Regenerating initramfs"
+dracut --force
+
+# To define 8 VFs per PF we do it on rc.local, because the driver needs to be unloaded and loaded again
+#if ! grep -q "NFV" /etc/rc.local
+#then
+# echo "" >> /etc/rc.local
+# echo "# NFV" >> /etc/rc.local
+# echo "modprobe -r ixgbe" >> /etc/rc.local
+# echo "modprobe ixgbe max_vfs=8" >> /etc/rc.local
+# echo "" >> /etc/rc.local
+
+# chmod +x /etc/rc.d/rc.local
+
+#fi
+
+echo
+echo "Do not forget to create a shared (NFS, Samba, ...) where original virtual machine images are allocated"
+echo
+echo "Do not forget to copy the public ssh key of openvim user into /home/${user_name}/.ssh/authorized_keys for authomatic login from openvim controller"
+echo
+
+echo "Reboot the system to make the changes effective"
+