--- /dev/null
+##
+# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
+# This file is part of openvim
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+# For those usages not covered by the Apache License, Version 2.0 please
+# contact with: nfvlabs@tid.es
+##
+
+
+
+#Miscellaneous
+#Option to test openvim without the needed infrastructure, possible values are
+# "normal" by default, Openflow controller (OFC), switch and real host are needed
+# "test" Used for testing http API and database without connecting to host or to OFC
+# "host only" Used when neither OFC nor OF switch are provided.
+# Dataplane network connection must be done manually.
+# "OF only" Used for testing of new openflow controllers support. No real VM deployments will be done but
+# OFC will be used as in real mode
+# "development" Forced a cloud-type deployment, nomal memory instead of hugepages is used,
+# without cpu pinning, and using a bridge network instead of a real OFC dataplane networks.
+# The same 'development_bridge' (see below) is used for all dataplane networks
+mode: test
+
+#Openflow controller information
+of_controller: floodlight # Type of controller to be used.
+ # Valid controllers are 'opendaylight', 'floodlight' or <custom>
+#of_controller_module: module # Only needed for <custom>. Python module that implement
+ # this controller. By default a file with the name <custom>.py is used
+#of_<other>: value # Other parameters required by <custom> controller. Consumed by __init__
+of_user: user credentials # User credentials for the controller if needed
+of_password: passwd credentials # Password credentials for the controller if needed
+of_controller_ip: 127.0.0.1 # IP address where the Openflow controller is listening
+of_controller_port: 7070 # TCP port where the Openflow controller is listening (REST API server)
+of_controller_dpid: '00:01:02:03:04:05:06:07' # Openflow Switch identifier (put here the right number)
+
+#This option is used for those openflow switch that cannot deliver one packet to several output with different vlan tags
+#When set to true, it fails when trying to attach different vlan tagged ports to the same net
+of_controller_nets_with_same_vlan: false # (by default, true)
+
+#Server parameters
+http_host: 0.0.0.0 # IP address where openvim is listening (by default, localhost)
+http_port: 9080 # General port where openvim is listening (by default, 9080)
+http_admin_port: 9085 # Admin port where openvim is listening (when missing, no administration server is launched)
+
+#database parameters
+db_host: localhost # by default localhost
+db_user: vim # DB user
+db_passwd: vimpw # DB password
+db_name: vim_db # Name of the VIM DB
+
+#host paremeters
+image_path: "/opt/VNF/images" # Folder, same for every host, where the VNF images will be copied
+
+#testing parameters (used by ./test/test_openvim.py)
+tenant_id: fc7b43b6-6bfa-11e4-84d2-5254006d6777 # Default tenant identifier for testing
+
+#VLAN ranges used for the dataplane networks (ptp, data)
+#When a network is created an unused value in this range is used
+network_vlan_range_start: 3000
+network_vlan_range_end: 4000
+
+# Overlay network implementation. Options are:
+# - ovs : (by default) Use a vlxan mesh between computes to handle the network overlay.
+# - bridge: Use pre-populated linux bridges with L2 conectivity at compte nodes.
+network_type : ovs
+ovs_controller_ip : localhost # dhcp controller IP address, must be change in order to
+ovs_controller_user : "osm_dhcp" # User for the dchp controller for OVS networks
+ovs_controller_file_path : "/var/lib/openvim" # Path for dhcp daemon configuration, by default '/var/lib/openvim'
+
+
+#host bridge interfaces for networks
+# Apply only for 'network_type: bridge'
+# Indicates the bridges at compute nodes to be used for the overlay networks
+# Bridge networks need to be pre-provisioned on each host and Openvim uses those pre-provisioned bridge networks.
+# Openvim assumes that the following bridge interfaces have been created on each host, appropriately associated to a physical port.
+# The following information needs to be provided:
+# - Name of the bridge (identical in all hosts)
+# - VLAN tag associated to each bridge interface
+# - The speed of the physical port in Gbps, where that bridge interface was created
+# For instance, next example assumes that 10 bridges have been created on each host
+# using vlans 2001 to 2010, associated to a 1Gbps physical port
+#bridge_ifaces:
+# #name: [vlan, speed in Gbps]
+# virbrMan1: [2001, 1]
+# virbrMan2: [2002, 1]
+# virbrMan3: [2003, 1]
+# virbrMan4: [2004, 1]
+# virbrMan5: [2005, 1]
+# virbrMan6: [2006, 1]
+# virbrMan7: [2007, 1]
+# virbrMan8: [2008, 1]
+# virbrMan9: [2009, 1]
+# virbrMan10: [2010, 1]
+
+#Used only when 'mode' is at development'. Indicates which 'bridge_ifaces' is used for dataplane networks
+#development_bridge: virbrMan10
+
+#DHCP SERVER PARAMETERS.
+#In case some of the previous 'bridge_ifaces' are connected to an EXTERNAL dhcp server, provide
+# the server parameters to allow openvim getting the allocated IP addresses of virtual machines
+# connected to the indicated 'bridge_ifaces' and or 'nets'. Openvim will connect to the dhcp server by ssh.
+#DHCP server must contain a shell script "get_dhcp_lease.sh" included in the path, that accepts a mac address as
+# parameter and return empty or the allocated IP address. See an example at the end of the file
+# ./openvim/dhcp_thread.py
+#COMMENT all lines in case you do not have a DHCP server in 'normal', 'development' or 'host only' modes.
+# For 'test' or 'OF only' modes you can leave then uncommented, because in these modes fake IP
+# address are generated instead of connecting with a real DHCP server.
+dhcp_server:
+ host: host-ip-or-name
+ #port: 22 #ssh port, by default 22
+ provider: isc-dhcp-server #dhcp-server type
+ user: user
+ #provide password, or key if needed
+ password: passwd
+ #key: ssh-access-key
+ #list of the previous bridge interfaces attached to this dhcp server
+ bridge_ifaces: [ virbrMan1, virbrMan2 ]
+ #list of the networks attached to this dhcp server
+ nets: [default]
+
+
+#logging parameters # DEBUG, INFO, WARNING, ERROR, CRITICAL
+log_level: ERROR
+log_level_db: DEBUG
+log_level_of: DEBUG
+
+