Add openflow-port-mapping CLI command

[osm/openvim.git] / openvimd.cfg

diff --git a/openvimd.cfg b/openvimd.cfg
index 2d1aabb..9641938 100644 (file)
--- a/openvimd.cfg
+++ b/openvimd.cfg
@@ -35,7 +35,7 @@
 mode: test
 
 #Openflow controller information
-of_controller:      floodlight                   # Type of controller to be used. 
+of_controller:      floodlight                   # Type of controller to be used.
                                                  # Valid controllers are 'opendaylight', 'floodlight' or <custom>
 #of_controller_module: module                    # Only needed for <custom>.  Python module that implement
                                                  # this controller. By default a file with the name  <custom>.py is used 
@@ -51,12 +51,12 @@ of_controller_dpid: '00:01:02:03:04:05:06:07'    # Openflow Switch identifier (p
 of_controller_nets_with_same_vlan: false         # (by default, true)
 
 #Server parameters
-http_host:       localhost           # IP address where openvim is listening (by default, localhost)
+http_host:       0.0.0.0             # IP address where openvim is listening (by default, localhost)
 http_port:       9080                # General port where openvim is listening (by default, 9080)
 http_admin_port: 9085                # Admin port where openvim is listening (when missing, no administration server is launched)
 
 #database parameters
-db_host:   0.0.0.0                   # by default localhost
+db_host:   localhost                   # by default localhost
 db_user:   vim                       # DB user
 db_passwd: vimpw                     # DB password
 db_name:   vim_db                    # Name of the VIM DB
@@ -72,8 +72,18 @@ tenant_id: fc7b43b6-6bfa-11e4-84d2-5254006d6777   # Default tenant identifier fo
 network_vlan_range_start: 3000
 network_vlan_range_end:   4000
 
+# Overlay network implementation. Options are:
+# - ovs :   (by default) Use a vlxan mesh between computes to handle the network overlay.
+# - bridge: Use pre-populated linux bridges with L2 conectivity at compte nodes.
+network_type : ovs
+ovs_controller_ip   :   localhost                   # dhcp controller IP address, must be change in order to
+ovs_controller_user :   "osm_dhcp"                  # User for the dchp controller for OVS networks
+ovs_controller_file_path  :   "/var/lib/openvim"    # Path for dhcp daemon configuration, by default '/var/lib/openvim'
+
+
 #host bridge interfaces for networks
-# Openvim cannot create bridge networks automatically, in the same way as other CMS do.
+# Apply only for 'network_type: bridge'
+# Indicates the bridges at compute nodes to be used for the overlay networks
 # Bridge networks need to be pre-provisioned on each host and Openvim uses those pre-provisioned bridge networks.
 # Openvim assumes that the following bridge interfaces have been created on each host, appropriately associated to a physical port.
 # The following information needs to be provided:
@@ -82,21 +92,21 @@ network_vlan_range_end:   4000
 #    - The speed of the physical port in Gbps, where that bridge interface was created
 # For instance, next example assumes that 10 bridges have been created on each host
 # using vlans 2001 to 2010, associated to a 1Gbps physical port 
-bridge_ifaces:
-   #name:      [vlan, speed in Gbps]
-   virbrMan1:  [2001, 1]
-   virbrMan2:  [2002, 1]
-   virbrMan3:  [2003, 1]
-   virbrMan4:  [2004, 1]
-   virbrMan5:  [2005, 1]
-   virbrMan6:  [2006, 1]
-   virbrMan7:  [2007, 1]
-   virbrMan8:  [2008, 1]
-   virbrMan9:  [2009, 1]
-   virbrMan10: [2010, 1]
+#bridge_ifaces:
+#   #name:      [vlan, speed in Gbps]
+#   virbrMan1:  [2001, 1]
+#   virbrMan2:  [2002, 1]
+#   virbrMan3:  [2003, 1]
+#   virbrMan4:  [2004, 1]
+#   virbrMan5:  [2005, 1]
+#   virbrMan6:  [2006, 1]
+#   virbrMan7:  [2007, 1]
+#   virbrMan8:  [2008, 1]
+#   virbrMan9:  [2009, 1]
+#   virbrMan10: [2010, 1]
 
 #Used only when 'mode' is at development'. Indicates which 'bridge_ifaces' is used for dataplane networks
-development_bridge: virbrMan10
+#development_bridge: virbrMan10
 
 #DHCP SERVER PARAMETERS. 
 #In case some of the previous 'bridge_ifaces' are connected to an EXTERNAL dhcp server, provide 
@@ -126,3 +136,5 @@ dhcp_server:
 log_level:       ERROR
 log_level_db:    DEBUG
 log_level_of:    DEBUG
+
+