+++ /dev/null
-##
-# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
-# This file is part of openvim
-# All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-#
-# For those usages not covered by the Apache License, Version 2.0 please
-# contact with: nfvlabs@tid.es
-##
-
-
-
-#Miscellaneous
-#Option to test openvim without the needed infrastructure, possible values are
-# "normal" by default, Openflow controller (OFC), switch and real host are needed
-# "test" Used for testing http API and database without connecting to host or to OFC
-# "host only" Used when neither OFC nor OF switch are provided.
-# Dataplane network connection must be done manually.
-# "OF only" Used for testing of new openflow controllers support. No real VM deployments will be done but
-# OFC will be used as in real mode
-# "development" Forced a cloud-type deployment, nomal memory instead of hugepages is used,
-# without cpu pinning, and using a bridge network instead of a real OFC dataplane networks.
-# The same 'development_bridge' (see below) is used for all dataplane networks
-mode: test
-
-#Openflow controller information
-of_controller: floodlight # Type of controller to be used.
- # Valid controllers are 'opendaylight', 'floodlight' or <custom>
-#of_controller_module: module # Only needed for <custom>. Python module that implement
- # this controller. By default a file with the name <custom>.py is used
-#of_<other>: value # Other parameters required by <custom> controller. Consumed by __init__
-of_user: user credentials # User credentials for the controller if needed
-of_password: passwd credentials # Password credentials for the controller if needed
-of_controller_ip: 127.0.0.1 # IP address where the Openflow controller is listening
-of_controller_port: 7070 # TCP port where the Openflow controller is listening (REST API server)
-of_controller_dpid: '00:01:02:03:04:05:06:07' # Openflow Switch identifier (put here the right number)
-
-#This option is used for those openflow switch that cannot deliver one packet to several output with different vlan tags
-#When set to true, it fails when trying to attach different vlan tagged ports to the same net
-of_controller_nets_with_same_vlan: false # (by default, true)
-
-#Server parameters
-http_host: 0.0.0.0 # IP address where openvim is listening (by default, localhost)
-http_port: 9080 # General port where openvim is listening (by default, 9080)
-http_admin_port: 9085 # Admin port where openvim is listening (when missing, no administration server is launched)
-
-#database parameters
-db_host: localhost # by default localhost
-db_user: vim # DB user
-db_passwd: vimpw # DB password
-db_name: vim_db # Name of the VIM DB
-
-#host paremeters
-image_path: "/opt/VNF/images" # Folder, same for every host, where the VNF images will be copied
-
-#testing parameters (used by ./test/test_openvim.py)
-tenant_id: fc7b43b6-6bfa-11e4-84d2-5254006d6777 # Default tenant identifier for testing
-
-#VLAN ranges used for the dataplane networks (ptp, data)
-#When a network is created an unused value in this range is used
-network_vlan_range_start: 3000
-network_vlan_range_end: 4000
-
-# Overlay network implementation. Options are:
-# - ovs : (by default) Use a vlxan mesh between computes to handle the network overlay.
-# - bridge: Use pre-populated linux bridges with L2 conectivity at compte nodes.
-network_type : ovs
-ovs_controller_ip : localhost # dhcp controller IP address, must be change in order to
-ovs_controller_user : "osm_dhcp" # User for the dchp controller for OVS networks
-ovs_controller_file_path : "/var/lib/openvim" # Path for dhcp daemon configuration, by default '/var/lib/openvim'
-
-
-#host bridge interfaces for networks
-# Apply only for 'network_type: bridge'
-# Indicates the bridges at compute nodes to be used for the overlay networks
-# Bridge networks need to be pre-provisioned on each host and Openvim uses those pre-provisioned bridge networks.
-# Openvim assumes that the following bridge interfaces have been created on each host, appropriately associated to a physical port.
-# The following information needs to be provided:
-# - Name of the bridge (identical in all hosts)
-# - VLAN tag associated to each bridge interface
-# - The speed of the physical port in Gbps, where that bridge interface was created
-# For instance, next example assumes that 10 bridges have been created on each host
-# using vlans 2001 to 2010, associated to a 1Gbps physical port
-#bridge_ifaces:
-# #name: [vlan, speed in Gbps]
-# virbrMan1: [2001, 1]
-# virbrMan2: [2002, 1]
-# virbrMan3: [2003, 1]
-# virbrMan4: [2004, 1]
-# virbrMan5: [2005, 1]
-# virbrMan6: [2006, 1]
-# virbrMan7: [2007, 1]
-# virbrMan8: [2008, 1]
-# virbrMan9: [2009, 1]
-# virbrMan10: [2010, 1]
-
-#Used only when 'mode' is at development'. Indicates which 'bridge_ifaces' is used for dataplane networks
-#development_bridge: virbrMan10
-
-#DHCP SERVER PARAMETERS.
-#In case some of the previous 'bridge_ifaces' are connected to an EXTERNAL dhcp server, provide
-# the server parameters to allow openvim getting the allocated IP addresses of virtual machines
-# connected to the indicated 'bridge_ifaces' and or 'nets'. Openvim will connect to the dhcp server by ssh.
-#DHCP server must contain a shell script "get_dhcp_lease.sh" included in the path, that accepts a mac address as
-# parameter and return empty or the allocated IP address. See an example at the end of the file
-# ./openvim/dhcp_thread.py
-#COMMENT all lines in case you do not have a DHCP server in 'normal', 'development' or 'host only' modes.
-# For 'test' or 'OF only' modes you can leave then uncommented, because in these modes fake IP
-# address are generated instead of connecting with a real DHCP server.
-dhcp_server:
- host: host-ip-or-name
- #port: 22 #ssh port, by default 22
- provider: isc-dhcp-server #dhcp-server type
- user: user
- #provide password, or key if needed
- password: passwd
- #key: ssh-access-key
- #list of the previous bridge interfaces attached to this dhcp server
- bridge_ifaces: [ virbrMan1, virbrMan2 ]
- #list of the networks attached to this dhcp server
- nets: [default]
-
-
-#logging parameters # DEBUG, INFO, WARNING, ERROR, CRITICAL
-log_level: ERROR
-log_level_db: DEBUG
-log_level_of: DEBUG
-
-