2 # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
3 # This file is part of openvim
6 # Licensed under the Apache License, Version 2.0 (the "License"); you may
7 # not use this file except in compliance with the License. You may obtain
8 # a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
14 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
15 # License for the specific language governing permissions and limitations
18 # For those usages not covered by the Apache License, Version 2.0 please
19 # contact with: nfvlabs@tid.es
25 #Option to test openvim without the needed infrastructure, possible values are
26 # "normal" by default, Openflow controller (OFC), switch and real host are needed
27 # "test" Used for testing http API and database without connecting to host or to OFC
28 # "host only" Used when neither OFC nor OF switch are provided.
29 # Dataplane network connection must be done manually.
30 # "OF only" Used for testing of new openflow controllers support. No real VM deployments will be done but
31 # OFC will be used as in real mode
32 # "development" Forced a cloud-type deployment, nomal memory instead of hugepages is used,
33 # without cpu pinning, and using a bridge network instead of a real OFC dataplane networks.
34 # The same 'development_bridge' (see below) is used for all dataplane networks
37 #Openflow controller information
38 of_controller: floodlight # Type of controller to be used.
39 # Valid controllers are 'opendaylight', 'floodlight' or <custom>
40 #of_controller_module: module # Only needed for <custom>. Python module that implement
41 # this controller. By default a file with the name <custom>.py is used
42 #of_<other>: value # Other parameters required by <custom> controller. Consumed by __init__
43 of_user: user credentials # User credentials for the controller if needed
44 of_password: passwd credentials # Password credentials for the controller if needed
45 of_controller_ip: 127.0.0.1 # IP address where the Openflow controller is listening
46 of_controller_port: 7070 # TCP port where the Openflow controller is listening (REST API server)
47 of_controller_dpid: '00:01:02:03:04:05:06:07' # Openflow Switch identifier (put here the right number)
49 #This option is used for those openflow switch that cannot deliver one packet to several output with different vlan tags
50 #When set to true, it fails when trying to attach different vlan tagged ports to the same net
51 of_controller_nets_with_same_vlan: false # (by default, true)
54 http_host: localhost # IP address where openvim is listening (by default, localhost)
55 http_port: 9080 # General port where openvim is listening (by default, 9080)
56 http_admin_port: 9085 # Admin port where openvim is listening (when missing, no administration server is launched)
59 db_host: 0.0.0.0 # by default localhost
60 db_user: vim # DB user
61 db_passwd: vimpw # DB password
62 db_name: vim_db # Name of the VIM DB
65 image_path: "/opt/VNF/images" # Folder, same for every host, where the VNF images will be copied
67 #testing parameters (used by ./test/test_openvim.py)
68 tenant_id: fc7b43b6-6bfa-11e4-84d2-5254006d6777 # Default tenant identifier for testing
70 #VLAN ranges used for the dataplane networks (ptp, data)
71 #When a network is created an unused value in this range is used
72 network_vlan_range_start: 3000
73 network_vlan_range_end: 4000
75 # Overlay network implementation. Options are:
76 # - ovs : (by default) Use a vlxan mesh between computes to handle the network overlay.
77 # - bridge: Use pre-populated linux bridges with L2 conectivity at compte nodes.
79 ovs_controller_ip : localhost # dhcp controller IP address, must be change in order to
80 ovs_controller_user : "osm_dhcp" # User for the dchp controller for OVS networks
81 ovs_controller_file_path : "/var/lib/openvim" # Path for dhcp daemon configuration, by default '/var/lib/openvim'
84 #host bridge interfaces for networks
85 # Apply only for 'network_type: bridge'
86 # Indicates the bridges at compute nodes to be used for the overlay networks
87 # Bridge networks need to be pre-provisioned on each host and Openvim uses those pre-provisioned bridge networks.
88 # Openvim assumes that the following bridge interfaces have been created on each host, appropriately associated to a physical port.
89 # The following information needs to be provided:
90 # - Name of the bridge (identical in all hosts)
91 # - VLAN tag associated to each bridge interface
92 # - The speed of the physical port in Gbps, where that bridge interface was created
93 # For instance, next example assumes that 10 bridges have been created on each host
94 # using vlans 2001 to 2010, associated to a 1Gbps physical port
96 # #name: [vlan, speed in Gbps]
97 # virbrMan1: [2001, 1]
98 # virbrMan2: [2002, 1]
99 # virbrMan3: [2003, 1]
100 # virbrMan4: [2004, 1]
101 # virbrMan5: [2005, 1]
102 # virbrMan6: [2006, 1]
103 # virbrMan7: [2007, 1]
104 # virbrMan8: [2008, 1]
105 # virbrMan9: [2009, 1]
106 # virbrMan10: [2010, 1]
108 #Used only when 'mode' is at development'. Indicates which 'bridge_ifaces' is used for dataplane networks
109 #development_bridge: virbrMan10
111 #DHCP SERVER PARAMETERS.
112 #In case some of the previous 'bridge_ifaces' are connected to an EXTERNAL dhcp server, provide
113 # the server parameters to allow openvim getting the allocated IP addresses of virtual machines
114 # connected to the indicated 'bridge_ifaces' and or 'nets'. Openvim will connect to the dhcp server by ssh.
115 #DHCP server must contain a shell script "get_dhcp_lease.sh" included in the path, that accepts a mac address as
116 # parameter and return empty or the allocated IP address. See an example at the end of the file
117 # ./openvim/dhcp_thread.py
118 #COMMENT all lines in case you do not have a DHCP server in 'normal', 'development' or 'host only' modes.
119 # For 'test' or 'OF only' modes you can leave then uncommented, because in these modes fake IP
120 # address are generated instead of connecting with a real DHCP server.
122 host: host-ip-or-name
123 #port: 22 #ssh port, by default 22
124 provider: isc-dhcp-server #dhcp-server type
126 #provide password, or key if needed
129 #list of the previous bridge interfaces attached to this dhcp server
130 bridge_ifaces: [ virbrMan1, virbrMan2 ]
131 #list of the networks attached to this dhcp server
135 #logging parameters # DEBUG, INFO, WARNING, ERROR, CRITICAL