Newer
Older
#!/bin/bash
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
set +eux
K8S_VERSION=1.28
K8S_PACKAGE_VERSION="$K8S_VERSION".2-1.1
# installs kubernetes packages
function install_kube() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
# Kubernetes releases can be found here: https://kubernetes.io/releases/
# To check other available versions, run the following command
# curl -s https://packages.cloud.google.com/apt/dists/kubernetes-xenial/main/binary-amd64/Packages | grep Version | awk '{print $2}'
sudo apt-get -y update && sudo apt-get install -y apt-transport-https ca-certificates curl
curl -fsSL https://pkgs.k8s.io/core:/stable:/v"$K8S_VERSION"/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v'$K8S_VERSION'/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list
echo "Installing Kubernetes Packages ..."
sudo apt-get install -y kubelet=${K8S_PACKAGE_VERSION} kubeadm=${K8S_PACKAGE_VERSION} kubectl=${K8S_PACKAGE_VERSION}
sudo apt-mark hold kubelet kubeadm kubectl
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# check and track kube packages installation
function check_and_track_kube_install() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
kubelet_version=$(dpkg -s kubelet|grep Version|awk '{print $2}')
[ -n "${kubelet_version}" ] || FATAL_TRACK k8scluster "Kubelet was not installed."
kubeadm_version=$(dpkg -s kubeadm|grep Version|awk '{print $2}')
[ -n "${kubeadm_version}" ] || FATAL_TRACK k8scluster "Kubeadm was not installed."
kubectl_version=$(dpkg -s kubectl|grep Version|awk '{print $2}')
[ -n "${kubectl_version}" ] || FATAL_TRACK k8scluster "Kubectl was not installed."
track k8scluster install_k8s_ok none none none kubelet ${kubelet_version} none none kubeadm ${kubeadm_version} none none kubectl ${kubectl_version} none none
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# initializes kubernetes control plane
function init_kubeadm() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
sudo swapoff -a
sudo sed -i.bak '/.*none.*swap/s/^\(.*\)$/#\1/g' /etc/fstab
sudo kubeadm init --config $1 --dry-run || FATAL_TRACK k8scluster "kubeadm init dry-run failed"
sudo kubeadm init --config $1
sleep 5
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# Initializes kubeconfig file
function kube_config_dir() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
[ ! -d $K8S_MANIFEST_DIR ] && FATAL_TRACK k8scluster "Kubernetes folder $K8S_MANIFEST_DIR was not found"
mkdir -p $HOME/.kube
sudo cp /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# test kubernetes installation
function check_and_track_init_k8s() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo "Reading existing namespaces"
kubectl get ns || FATAL_TRACK k8scluster "Failed getting namespaces"
track k8scluster init_k8s_ok
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# deploys flannel as daemonsets
function deploy_cni_provider() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
CNI_DIR="$(mktemp -d -q --tmpdir "flannel.XXXXXX")"
trap 'rm -rf "${CNI_DIR}"' EXIT
KUBE_FLANNEL_FILE_URL="https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml"
wget --retry-on-host-error --retry-on-http-error 404,429,503 --tries=5 "${KUBE_FLANNEL_FILE_URL}" -P $CNI_DIR
[ ! -f $CNI_DIR/kube-flannel.yml ] && FATAL_TRACK k8scluster "Cannot Install Flannel because $CNI_DIR/kube-flannel.yml was not found. Maybe the file ${KUBE_FLANNEL_FILE_URL} is temporarily not accessible"
kubectl apply -f $CNI_DIR
[ $? -ne 0 ] && FATAL_TRACK k8scluster "Cannot Install Flannel"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# taints K8s master node
function taint_master_node() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
K8S_MASTER=$(kubectl get nodes | awk '$3~/control-plane/'| awk '{print $1; exit}')
kubectl taint node $K8S_MASTER node-role.kubernetes.io/control-plane:NoSchedule-
sleep 5
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# check and track kube packages installation
function check_and_track_k8s_ready_before_helm() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
kubectl get events || FATAL_TRACK k8scluster "Failed getting events"
track k8scluster k8s_ready_before_helm
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
function install_k8s_storageclass() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
# Openebs versions can be found here: https://github.com/openebs/openebs/releases
OPENEBS_VERSION="3.7.0"
echo "Installing OpenEBS"
helm repo add openebs https://openebs.github.io/charts
helm repo update
helm install --create-namespace --namespace openebs openebs openebs/openebs --version ${OPENEBS_VERSION}
helm ls -n openebs
local storageclass_timeout=400
local counter=0
local storageclass_ready=""
echo "Waiting for storageclass"
while (( counter < storageclass_timeout ))
do
kubectl get storageclass openebs-hostpath &> /dev/null
if [ $? -eq 0 ] ; then
echo "Storageclass available"
storageclass_ready="y"
break
else
counter=$((counter + 15))
sleep 15
fi
done
[ -n "$storageclass_ready" ] || FATAL_TRACK k8scluster "Storageclass not ready after $storageclass_timeout seconds. Cannot install openebs"
kubectl patch storageclass openebs-hostpath -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
#installs metallb from helm
function install_helm_metallb() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo "Installing MetalLB"
helm repo add metallb https://metallb.github.io/metallb
helm repo update
helm install --create-namespace --namespace metallb-system metallb metallb/metallb --version ${METALLB_VERSION}
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
function configure_ipaddresspool_metallb() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo "Creating IP address pool manifest: ${OSM_CLUSTER_WORK_DIR}/metallb-ipaddrpool.yaml"
METALLB_IP_RANGE="$DEFAULT_IP/32"
echo "apiVersion: metallb.io/v1beta1
kind: IPAddressPool
metadata:
name: first-pool
namespace: metallb-system
spec:
addresses:
- ${METALLB_IP_RANGE}" | sudo tee -a ${OSM_CLUSTER_WORK_DIR}/metallb-ipaddrpool.yaml
echo "Applying IP address pool manifest: kubectl apply -f ${OSM_CLUSTER_WORK_DIR}/metallb-ipaddrpool.yaml"
kubectl apply -f ${OSM_CLUSTER_WORK_DIR}/metallb-ipaddrpool.yaml || FATAL_TRACK k8scluster "Cannot create IP address Pool in MetalLB"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
#installs cert-manager
function install_helm_certmanager() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo "Installing cert-manager"
CERTMANAGER_VERSION="v1.9.1"
helm repo add jetstack https://charts.jetstack.io
helm repo update
helm install cert-manager --create-namespace --namespace cert-manager jetstack/cert-manager \
--version ${CERTMANAGER_VERSION} --set installCRDs=true --set prometheus.enabled=false \
--set clusterResourceNamespace=osm \
--set extraArgs="{--enable-certificate-owner-ref=true}"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
#checks openebs and metallb readiness
function check_for_readiness() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
# Default input values
sampling_period=2 # seconds
time_for_readiness=20 # seconds ready
time_for_failure=200 # seconds broken
OPENEBS_NAMESPACE=openebs
METALLB_NAMESPACE=metallb-system
CERTMANAGER_NAMESPACE=cert-manager
# STACK_NAME=osm # By default, "osm"
# Equivalent number of samples
oks_threshold=$((time_for_readiness/${sampling_period})) # No. ok samples to declare the system ready
failures_threshold=$((time_for_failure/${sampling_period})) # No. nok samples to declare the system broken
failures_in_a_row=0
oks_in_a_row=0
####################################################################################
# Loop to check system readiness
####################################################################################
while [[ (${failures_in_a_row} -lt ${failures_threshold}) && (${oks_in_a_row} -lt ${oks_threshold}) ]]
do
# State of OpenEBS
OPENEBS_STATE=$(kubectl get pod -n ${OPENEBS_NAMESPACE} --no-headers 2>&1)
OPENEBS_READY=$(echo "${OPENEBS_STATE}" | awk '$2=="1/1" || $2=="2/2" {printf ("%s\t%s\t\n", $1, $2)}')
OPENEBS_NOT_READY=$(echo "${OPENEBS_STATE}" | awk '$2!="1/1" && $2!="2/2" {printf ("%s\t%s\t\n", $1, $2)}')
COUNT_OPENEBS_READY=$(echo "${OPENEBS_READY}"| grep -v -e '^$' | wc -l)
COUNT_OPENEBS_NOT_READY=$(echo "${OPENEBS_NOT_READY}" | grep -v -e '^$' | wc -l)
# State of MetalLB
METALLB_STATE=$(kubectl get pod -n ${METALLB_NAMESPACE} --no-headers 2>&1)
METALLB_READY=$(echo "${METALLB_STATE}" | awk '$2=="1/1" || $2=="4/4" {printf ("%s\t%s\t\n", $1, $2)}')
METALLB_NOT_READY=$(echo "${METALLB_STATE}" | awk '$2!="1/1" && $2!="4/4" {printf ("%s\t%s\t\n", $1, $2)}')
COUNT_METALLB_READY=$(echo "${METALLB_READY}" | grep -v -e '^$' | wc -l)
COUNT_METALLB_NOT_READY=$(echo "${METALLB_NOT_READY}" | grep -v -e '^$' | wc -l)
# State of CertManager
CERTMANAGER_STATE=$(kubectl get pod -n ${CERTMANAGER_NAMESPACE} --no-headers 2>&1)
CERTMANAGER_READY=$(echo "${CERTMANAGER_STATE}" | awk '$2=="1/1" || $2=="2/2" {printf ("%s\t%s\t\n", $1, $2)}')
CERTMANAGER_NOT_READY=$(echo "${CERTMANAGER_STATE}" | awk '$2!="1/1" && $2!="2/2" {printf ("%s\t%s\t\n", $1, $2)}')
COUNT_CERTMANAGER_READY=$(echo "${CERTMANAGER_READY}" | grep -v -e '^$' | wc -l)
COUNT_CERTMANAGER_NOT_READY=$(echo "${CERTMANAGER_NOT_READY}" | grep -v -e '^$' | wc -l)
# OK sample
if [[ $((${COUNT_OPENEBS_NOT_READY}+${COUNT_METALLB_NOT_READY})) -eq 0 ]]
then
((++oks_in_a_row))
failures_in_a_row=0
echo -ne ===\> Successful checks: "${oks_in_a_row}"/${oks_threshold}\\r
# NOK sample
else
((++failures_in_a_row))
oks_in_a_row=0
echo
echo Bootstraping... "${failures_in_a_row}" checks of ${failures_threshold}
# Reports failed pods in OpenEBS
if [[ "${COUNT_OPENEBS_NOT_READY}" -ne 0 ]]
then
echo "OpenEBS: Waiting for ${COUNT_OPENEBS_NOT_READY} of $((${COUNT_OPENEBS_NOT_READY}+${COUNT_OPENEBS_READY})) pods to be ready:"
echo "${OPENEBS_NOT_READY}"
echo
fi
# Reports failed pods in MetalLB
if [[ "${COUNT_METALLB_NOT_READY}" -ne 0 ]]
then
echo "MetalLB: Waiting for ${COUNT_METALLB_NOT_READY} of $((${COUNT_METALLB_NOT_READY}+${COUNT_METALLB_READY})) pods to be ready:"
echo "${METALLB_NOT_READY}"
echo
fi
# Reports failed pods in CertManager
if [[ "${COUNT_CERTMANAGER_NOT_READY}" -ne 0 ]]
then
echo "CertManager: Waiting for ${COUNT_CERTMANAGER_NOT_READY} of $((${COUNT_CERTMANAGER_NOT_READY}+${COUNT_CERTMANAGER_READY})) pods to be ready:"
echo "${CERTMANAGER_NOT_READY}"
echo
fi
fi
#------------ NEXT SAMPLE
sleep ${sampling_period}
done
####################################################################################
# OUTCOME
####################################################################################
if [[ (${failures_in_a_row} -ge ${failures_threshold}) ]]
then
echo
FATAL_TRACK k8scluster "K8S CLUSTER IS BROKEN"
else
echo
echo "K8S CLUSTER IS READY"
fi
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
#removes osm deployments and services
function remove_k8s_namespace() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo "Deleting existing namespace $1: kubectl delete ns $1"
kubectl delete ns $1 2>/dev/null
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
# main
while getopts ":D:d:i:-: " o; do
case "${o}" in
i)
DEFAULT_IP="${OPTARG}"
;;
d)
OSM_CLUSTER_WORK_DIR="${OPTARG}"
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
;;
D)
OSM_DEVOPS="${OPTARG}"
;;
-)
[ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="y" && continue
echo -e "Invalid option: '--$OPTARG'\n" >&2
exit 1
;;
:)
echo "Option -$OPTARG requires an argument" >&2
exit 1
;;
\?)
echo -e "Invalid option: '-$OPTARG'\n" >&2
exit 1
;;
*)
exit 1
;;
esac
done
source $OSM_DEVOPS/common/logging
source $OSM_DEVOPS/common/track
echo "DEBUG_INSTALL=$DEBUG_INSTALL"
echo "DEFAULT_IP=$DEFAULT_IP"
echo "OSM_DEVOPS=$OSM_DEVOPS"
echo "OSM_CLUSTER_WORK_DIR=$OSM_CLUSTER_WORK_DIR"
echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
echo "HOME=$HOME"
garciadeblas
committed
echo "Creating folders for installation"
[ ! -d "$OSM_CLUSTER_WORK_DIR" ] && sudo mkdir -p $OSM_CLUSTER_WORK_DIR
echo "Copying kubeadm-config from $OSM_DEVOPS/installers/kubeadm-config.yaml to $OSM_CLUSTER_WORK_DIR/kubeadm-config.yaml"
sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_CLUSTER_WORK_DIR/kubeadm-config.yaml
check_and_track_kube_install
init_kubeadm $OSM_CLUSTER_WORK_DIR/kubeadm-config.yaml
check_and_track_init_k8s
deploy_cni_provider
taint_master_node
check_and_track_k8s_ready_before_helm
remove_k8s_namespace osm
# install_helm has been moved to install_helm_client.sh, run from full_install_osm.sh,
# but tracking is still here because the installation analytics still expects it
track k8scluster install_helm_ok
install_k8s_storageclass
track k8scluster k8s_storageclass_ok
track k8scluster k8s_metallb_ok
install_helm_certmanager
track k8scluster k8s_certmanager_ok
track k8scluster k8s_ready_ok
configure_ipaddresspool_metallb