openvimd.cfg - osm/openvim - Gitiles

 ##
 # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
 # This file is part of openvim
 # All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"); you may
 # not use this file except in compliance with the License. You may obtain
 # a copy of the License at
 #
 #         http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 # License for the specific language governing permissions and limitations
 # under the License.
 #
 # For those usages not covered by the Apache License, Version 2.0 please
 # contact with: nfvlabs@tid.es
 ##


 #Miscellaneous
 #Option to test openvim without the needed infrastructure, possible values are
 #    "normal"      by default, Openflow controller (OFC), switch and real host are needed
 #    "test"        Used for testing http API and database without connecting to host or to OFC
 #    "host only"   Used when neither OFC nor OF switch are provided.
 #                  Dataplane network connection must be done manually.
 #    "OF only"     Used for testing of new openflow controllers support. No real VM deployments will be done but
 #                  OFC will be used as in real mode
 #    "development" Forced a cloud-type deployment, nomal memory instead of hugepages is used,
 #                  without cpu pinning, and using a bridge network instead of a real OFC dataplane networks.
 #                  The same 'development_bridge' (see below) is used for all dataplane networks
 mode: test

 #Openflow controller information
 of_controller:      floodlight                   # Type of controller to be used.
                                                  # Valid controllers are 'opendaylight', 'floodlight' or <custom>
 #of_controller_module: module                    # Only needed for <custom>.  Python module that implement
                                                  # this controller. By default a file with the name  <custom>.py is used
 #of_<other>:           value                     # Other parameters required by <custom> controller. Consumed by __init__
 of_user:            user credentials             # User credentials for the controller if needed
 of_password:        passwd credentials           # Password credentials for the controller if needed
 of_controller_ip:   127.0.0.1                    # IP address where the Openflow controller is listening
 of_controller_port: 7070                         # TCP port where the Openflow controller is listening (REST API server)
 of_controller_dpid: '00:01:02:03:04:05:06:07'    # Openflow Switch identifier (put here the right number)

 #This option is used for those openflow switch that cannot deliver one packet to several output with different vlan tags
 #When set to true, it fails when trying to attach different vlan tagged ports to the same net
 of_controller_nets_with_same_vlan: false         # (by default, true)

 #Server parameters
 http_host:       0.0.0.0             # IP address where openvim is listening (by default, localhost)
 http_port:       9080                # General port where openvim is listening (by default, 9080)
 http_admin_port: 9085                # Admin port where openvim is listening (when missing, no administration server is launched)

 #database parameters
 db_host:   localhost                   # by default localhost
 db_user:   vim                       # DB user
 db_passwd: vimpw                     # DB password
 db_name:   vim_db                    # Name of the VIM DB

 #host paremeters
 image_path: "/opt/VNF/images"        # Folder, same for every host, where the VNF images will be copied

 #testing parameters (used by ./test/test_openvim.py)
 tenant_id: fc7b43b6-6bfa-11e4-84d2-5254006d6777   # Default tenant identifier for testing

 #VLAN ranges used for the dataplane networks (ptp, data)
 #When a network is created an unused value in this range is used
 network_vlan_range_start: 3000
 network_vlan_range_end:   4000

 # Overlay network implementation. Options are:
 # - ovs :   (by default) Use a vlxan mesh between computes to handle the network overlay.
 # - bridge: Use pre-populated linux bridges with L2 conectivity at compte nodes.
 network_type : ovs
 ovs_controller_ip   :   localhost                   # dhcp controller IP address, must be change in order to
 ovs_controller_user :   "osm_dhcp"                  # User for the dchp controller for OVS networks
 ovs_controller_file_path  :   "/var/lib/openvim"    # Path for dhcp daemon configuration, by default '/var/lib/openvim'


 #host bridge interfaces for networks
 # Apply only for 'network_type: bridge'
 # Indicates the bridges at compute nodes to be used for the overlay networks
 # Bridge networks need to be pre-provisioned on each host and Openvim uses those pre-provisioned bridge networks.
 # Openvim assumes that the following bridge interfaces have been created on each host, appropriately associated to a physical port.
 # The following information needs to be provided:
 #    - Name of the bridge (identical in all hosts)
 #    - VLAN tag associated to each bridge interface
 #    - The speed of the physical port in Gbps, where that bridge interface was created
 # For instance, next example assumes that 10 bridges have been created on each host
 # using vlans 2001 to 2010, associated to a 1Gbps physical port
 #bridge_ifaces:
 #   #name:      [vlan, speed in Gbps]
 #   virbrMan1:  [2001, 1]
 #   virbrMan2:  [2002, 1]
 #   virbrMan3:  [2003, 1]
 #   virbrMan4:  [2004, 1]
 #   virbrMan5:  [2005, 1]
 #   virbrMan6:  [2006, 1]
 #   virbrMan7:  [2007, 1]
 #   virbrMan8:  [2008, 1]
 #   virbrMan9:  [2009, 1]
 #   virbrMan10: [2010, 1]

 #Used only when 'mode' is at development'. Indicates which 'bridge_ifaces' is used for dataplane networks
 #development_bridge: virbrMan10

 #DHCP SERVER PARAMETERS.
 #In case some of the previous 'bridge_ifaces' are connected to an EXTERNAL dhcp server, provide
 #   the server parameters to allow openvim getting the allocated IP addresses of virtual machines
 #   connected to the indicated 'bridge_ifaces' and or 'nets'. Openvim will connect to the dhcp server by ssh.
 #DHCP server must contain a shell script "get_dhcp_lease.sh" included in the path, that accepts a mac address as
 #   parameter and return empty or the allocated IP address. See an example at the end of the file
 #   ./openvim/dhcp_thread.py
 #COMMENT all lines in case you do not have a DHCP server in 'normal', 'development'  or 'host only' modes.
 #   For 'test' or 'OF only' modes you can leave then uncommented, because in these modes fake IP
 #   address are generated instead of connecting with a real DHCP server.
 dhcp_server:
    host:     host-ip-or-name
    #port:     22               #ssh port, by default 22
    provider: isc-dhcp-server  #dhcp-server type
    user:     user
    #provide password, or key if needed
    password: passwd
    #key:     ssh-access-key
    #list of the previous bridge interfaces attached to this dhcp server
    bridge_ifaces:   [ virbrMan1, virbrMan2 ]
    #list of the networks attached to this dhcp server
    nets: [default]


 #logging parameters       # DEBUG, INFO, WARNING, ERROR, CRITICAL
 log_level:       ERROR
 log_level_db:    DEBUG
 log_level_of:    DEBUG
	##
	# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
	# This file is part of openvim
	# All Rights Reserved.
	#
	# Licensed under the Apache License, Version 2.0 (the "License"); you may
	# not use this file except in compliance with the License. You may obtain
	# a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
	# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
	# License for the specific language governing permissions and limitations
	# under the License.
	#
	# For those usages not covered by the Apache License, Version 2.0 please
	# contact with: nfvlabs@tid.es
	##



	#Miscellaneous
	#Option to test openvim without the needed infrastructure, possible values are
	# "normal" by default, Openflow controller (OFC), switch and real host are needed
	# "test" Used for testing http API and database without connecting to host or to OFC
	# "host only" Used when neither OFC nor OF switch are provided.
	# Dataplane network connection must be done manually.
	# "OF only" Used for testing of new openflow controllers support. No real VM deployments will be done but
	# OFC will be used as in real mode
	# "development" Forced a cloud-type deployment, nomal memory instead of hugepages is used,
	# without cpu pinning, and using a bridge network instead of a real OFC dataplane networks.
	# The same 'development_bridge' (see below) is used for all dataplane networks
	mode: test

	#Openflow controller information
	of_controller: floodlight # Type of controller to be used.
	# Valid controllers are 'opendaylight', 'floodlight' or <custom>
	#of_controller_module: module # Only needed for <custom>. Python module that implement
	# this controller. By default a file with the name <custom>.py is used
	#of_<other>: value # Other parameters required by <custom> controller. Consumed by __init__
	of_user: user credentials # User credentials for the controller if needed
	of_password: passwd credentials # Password credentials for the controller if needed
	of_controller_ip: 127.0.0.1 # IP address where the Openflow controller is listening
	of_controller_port: 7070 # TCP port where the Openflow controller is listening (REST API server)
	of_controller_dpid: '00:01:02:03:04:05:06:07' # Openflow Switch identifier (put here the right number)

	#This option is used for those openflow switch that cannot deliver one packet to several output with different vlan tags
	#When set to true, it fails when trying to attach different vlan tagged ports to the same net
	of_controller_nets_with_same_vlan: false # (by default, true)

	#Server parameters
	http_host: 0.0.0.0 # IP address where openvim is listening (by default, localhost)
	http_port: 9080 # General port where openvim is listening (by default, 9080)
	http_admin_port: 9085 # Admin port where openvim is listening (when missing, no administration server is launched)

	#database parameters
	db_host: localhost # by default localhost
	db_user: vim # DB user
	db_passwd: vimpw # DB password
	db_name: vim_db # Name of the VIM DB

	#host paremeters
	image_path: "/opt/VNF/images" # Folder, same for every host, where the VNF images will be copied

	#testing parameters (used by ./test/test_openvim.py)
	tenant_id: fc7b43b6-6bfa-11e4-84d2-5254006d6777 # Default tenant identifier for testing

	#VLAN ranges used for the dataplane networks (ptp, data)
	#When a network is created an unused value in this range is used
	network_vlan_range_start: 3000
	network_vlan_range_end: 4000

	# Overlay network implementation. Options are:
	# - ovs : (by default) Use a vlxan mesh between computes to handle the network overlay.
	# - bridge: Use pre-populated linux bridges with L2 conectivity at compte nodes.
	network_type : ovs
	ovs_controller_ip : localhost # dhcp controller IP address, must be change in order to
	ovs_controller_user : "osm_dhcp" # User for the dchp controller for OVS networks
	ovs_controller_file_path : "/var/lib/openvim" # Path for dhcp daemon configuration, by default '/var/lib/openvim'


	#host bridge interfaces for networks
	# Apply only for 'network_type: bridge'
	# Indicates the bridges at compute nodes to be used for the overlay networks
	# Bridge networks need to be pre-provisioned on each host and Openvim uses those pre-provisioned bridge networks.
	# Openvim assumes that the following bridge interfaces have been created on each host, appropriately associated to a physical port.
	# The following information needs to be provided:
	# - Name of the bridge (identical in all hosts)
	# - VLAN tag associated to each bridge interface
	# - The speed of the physical port in Gbps, where that bridge interface was created
	# For instance, next example assumes that 10 bridges have been created on each host
	# using vlans 2001 to 2010, associated to a 1Gbps physical port
	#bridge_ifaces:
	# #name: [vlan, speed in Gbps]
	# virbrMan1: [2001, 1]
	# virbrMan2: [2002, 1]
	# virbrMan3: [2003, 1]
	# virbrMan4: [2004, 1]
	# virbrMan5: [2005, 1]
	# virbrMan6: [2006, 1]
	# virbrMan7: [2007, 1]
	# virbrMan8: [2008, 1]
	# virbrMan9: [2009, 1]
	# virbrMan10: [2010, 1]

	#Used only when 'mode' is at development'. Indicates which 'bridge_ifaces' is used for dataplane networks
	#development_bridge: virbrMan10

	#DHCP SERVER PARAMETERS.
	#In case some of the previous 'bridge_ifaces' are connected to an EXTERNAL dhcp server, provide
	# the server parameters to allow openvim getting the allocated IP addresses of virtual machines
	# connected to the indicated 'bridge_ifaces' and or 'nets'. Openvim will connect to the dhcp server by ssh.
	#DHCP server must contain a shell script "get_dhcp_lease.sh" included in the path, that accepts a mac address as
	# parameter and return empty or the allocated IP address. See an example at the end of the file
	# ./openvim/dhcp_thread.py
	#COMMENT all lines in case you do not have a DHCP server in 'normal', 'development' or 'host only' modes.
	# For 'test' or 'OF only' modes you can leave then uncommented, because in these modes fake IP
	# address are generated instead of connecting with a real DHCP server.
	dhcp_server:
	host: host-ip-or-name
	#port: 22 #ssh port, by default 22
	provider: isc-dhcp-server #dhcp-server type
	user: user
	#provide password, or key if needed
	password: passwd
	#key: ssh-access-key
	#list of the previous bridge interfaces attached to this dhcp server
	bridge_ifaces: [ virbrMan1, virbrMan2 ]
	#list of the networks attached to this dhcp server
	nets: [default]


	#logging parameters # DEBUG, INFO, WARNING, ERROR, CRITICAL
	log_level: ERROR
	log_level_db: DEBUG
	log_level_of: DEBUG