| #!/bin/bash |
| |
| ## |
| # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U. |
| # This file is part of openvim |
| # All Rights Reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may |
| # not use this file except in compliance with the License. You may obtain |
| # a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations |
| # under the License. |
| # |
| # For those usages not covered by the Apache License, Version 2.0 please |
| # contact with: nfvlabs@tid.es |
| ## |
| |
| # |
| #Upgrade/Downgrade openvim database preserving the content |
| # |
| |
| DBUSER="vim" |
| DBPASS="" |
| DBHOST="localhost" |
| DBPORT="3306" |
| DBNAME="vim_db" |
| |
| # Detect paths |
| MYSQL=$(which mysql) |
| AWK=$(which awk) |
| GREP=$(which grep) |
| DIRNAME=`dirname $0` |
| |
| function usage(){ |
| echo -e "Usage: $0 OPTIONS [{openvim_version}]" |
| echo -e " Upgrades/Downgrades openvim database preserving the content" |
| echo -e " if openvim_version is not provided it tries to get from openvimd.py using relative path" |
| echo -e " OPTIONS" |
| echo -e " -u USER database user. '$DBUSER' by default. Prompts if DB access fails" |
| echo -e " -p PASS database password. 'No password' or 'vimpw' by default. Prompts if DB access fails" |
| echo -e " -P PORT database port. '$DBPORT' by default" |
| echo -e " -h HOST database host. '$DBHOST' by default" |
| echo -e " -d NAME database name. '$DBNAME' by default. Prompts if DB access fails" |
| echo -e " --help shows this help" |
| } |
| |
| while getopts ":u:p:P:h:d:-:" o; do |
| case "${o}" in |
| u) |
| DBUSER="$OPTARG" |
| ;; |
| p) |
| DBPASS="$OPTARG" |
| ;; |
| P) |
| DBPORT="$OPTARG" |
| ;; |
| d) |
| DBNAME="$OPTARG" |
| ;; |
| h) |
| DBHOST="$OPTARG" |
| ;; |
| -) |
| [ "${OPTARG}" == "help" ] && usage && exit 0 |
| echo "Invalid option: --$OPTARG" >&2 && usage >&2 |
| exit 1 |
| ;; |
| \?) |
| echo "Invalid option: -$OPTARG" >&2 && usage >&2 |
| exit 1 |
| ;; |
| :) |
| echo "Option -$OPTARG requires an argument." >&2 && usage >&2 |
| exit 1 |
| ;; |
| *) |
| usage >&2 |
| exit -1 |
| ;; |
| esac |
| done |
| shift $((OPTIND-1)) |
| |
| |
| #GET OPENVIM VERSION |
| OPENVIM_VER="$1" |
| if [ -z "$OPENVIM_VER" ] |
| then |
| OPENVIM_VER=`${DIRNAME}/../openvimd.py -v` |
| OPENVIM_VER=${OPENVIM_VER%%-r*} |
| OPENVIM_VER=${OPENVIM_VER##*version } |
| echo " Detected openvim version $OPENVIM_VER" |
| fi |
| VERSION_1=`echo $OPENVIM_VER | cut -f 1 -d"."` |
| VERSION_2=`echo $OPENVIM_VER | cut -f 2 -d"."` |
| VERSION_3=`echo $OPENVIM_VER | cut -f 3 -d"."` |
| if ! [ "$VERSION_1" -ge 0 -a "$VERSION_2" -ge 0 -a "$VERSION_3" -ge 0 ] 2>/dev/null |
| then |
| [ -n "$1" ] && echo "Invalid openvim version '$1', expected 'X.X.X'" >&2 |
| [ -z "$1" ] && echo "Can not get openvim version" >&2 |
| exit -1 |
| fi |
| OPENVIM_VER_NUM=`printf "%d%03d%03d" ${VERSION_1} ${VERSION_2} ${VERSION_3}` |
| |
| #Creating temporary file |
| TEMPFILE="$(mktemp -q --tmpdir "migratemanodb.XXXXXX")" |
| trap 'rm -f "$TEMPFILE"' EXIT |
| chmod 0600 "$TEMPFILE" |
| |
| #if password is missing, before prompting for it try without password and with "manopw" |
| DBHOST_="-h$DBHOST" |
| DBPORT_="-P$DBPORT" |
| DEF_EXTRA_FILE_PARAM="--defaults-extra-file=$TEMPFILE" |
| if [ -z "${DBPASS}" ] |
| then |
| password_ok="" |
| echo -e "[client]\nuser='${DBUSER}'\npassword='vimpw'" > "$TEMPFILE" |
| mysql --defaults-extra-file="$TEMPFILE" $DBHOST_ $DBPORT_ $DBNAME -e "quit" >/dev/null 2>&1 && DBPASS="vimpw" |
| echo -e "[client]\nuser='${DBUSER}'\npassword=''" > "$TEMPFILE" |
| mysql --defaults-extra-file="$TEMPFILE" $DBHOST_ $DBPORT_ $DBNAME -e "quit" >/dev/null 2>&1 && DBPASS="" |
| fi |
| echo -e "[client]\nuser='${DBUSER}'\npassword='${DBPASS}'" > "$TEMPFILE" |
| |
| #check and ask for database user password |
| while ! mysql "$DEF_EXTRA_FILE_PARAM" $DBHOST_ $DBPORT_ $DBNAME -e "quit" >/dev/null 2>&1 |
| do |
| [ -n "$logintry" ] && echo -e "\nInvalid database credentials!!!. Try again (Ctrl+c to abort)" |
| [ -z "$logintry" ] && echo -e "\nProvide database name and credentials" |
| read -e -p "mysql database name($DBNAME): " KK |
| [ -n "$KK" ] && DBNAME="$KK" |
| read -e -p "mysql user($DBUSER): " KK |
| [ -n "$KK" ] && DBUSER="$KK" |
| read -e -s -p "mysql password: " DBPASS |
| echo -e "[client]\nuser='${DBUSER}'\npassword='${DBPASS}'" > "$TEMPFILE" |
| logintry="yes" |
| echo |
| done |
| |
| DBCMD="mysql $DEF_EXTRA_FILE_PARAM $DBHOST_ $DBPORT_ $DBNAME" |
| #echo DBCMD $DBCMD |
| |
| #GET DATABASE VERSION |
| #check that the database seems a openvim database |
| if ! echo -e "show create table instances;\nshow create table numas" | $DBCMD >/dev/null 2>&1 |
| then |
| echo " database $DBNAME does not seem to be an openvim database" >&2 |
| exit -1; |
| fi |
| |
| if ! echo 'show create table schema_version;' | $DBCMD >/dev/null 2>&1 |
| then |
| DATABASE_VER="0.0" |
| DATABASE_VER_NUM=0 |
| else |
| DATABASE_VER_NUM=`echo "select max(version_int) from schema_version;" | $DBCMD | tail -n+2` |
| DATABASE_VER=`echo "select version from schema_version where version_int='$DATABASE_VER_NUM';" | $DBCMD | tail -n+2` |
| [ "$DATABASE_VER_NUM" -lt 0 -o "$DATABASE_VER_NUM" -gt 100 ] && echo " Error can not get database version ($DATABASE_VER?)" >&2 && exit -1 |
| #echo "_${DATABASE_VER_NUM}_${DATABASE_VER}" |
| fi |
| |
| |
| #GET DATABASE TARGET VERSION |
| DATABASE_TARGET_VER_NUM=0 |
| [ $OPENVIM_VER_NUM -gt 1091 ] && DATABASE_TARGET_VER_NUM=1 #>0.1.91 => 1 |
| [ $OPENVIM_VER_NUM -ge 2003 ] && DATABASE_TARGET_VER_NUM=2 #0.2.03 => 2 |
| [ $OPENVIM_VER_NUM -ge 2005 ] && DATABASE_TARGET_VER_NUM=3 #0.2.5 => 3 |
| [ $OPENVIM_VER_NUM -ge 3001 ] && DATABASE_TARGET_VER_NUM=4 #0.3.1 => 4 |
| [ $OPENVIM_VER_NUM -ge 4001 ] && DATABASE_TARGET_VER_NUM=5 #0.4.1 => 5 |
| [ $OPENVIM_VER_NUM -ge 4002 ] && DATABASE_TARGET_VER_NUM=6 #0.4.2 => 6 |
| [ $OPENVIM_VER_NUM -ge 4005 ] && DATABASE_TARGET_VER_NUM=7 #0.4.5 => 7 |
| [ $OPENVIM_VER_NUM -ge 4010 ] && DATABASE_TARGET_VER_NUM=8 #0.4.10 => 8 |
| [ $OPENVIM_VER_NUM -ge 5001 ] && DATABASE_TARGET_VER_NUM=9 #0.5.1 => 9 |
| #TODO ... put next versions here |
| |
| |
| function upgrade_to_1(){ |
| echo " upgrade database from version 0.0 to version 0.1" |
| echo " CREATE TABLE \`schema_version\`" |
| echo "CREATE TABLE \`schema_version\` ( |
| \`version_int\` INT NOT NULL COMMENT 'version as a number. Must not contain gaps', |
| \`version\` VARCHAR(20) NOT NULL COMMENT 'version as a text', |
| \`openvim_ver\` VARCHAR(20) NOT NULL COMMENT 'openvim version', |
| \`comments\` VARCHAR(2000) NULL COMMENT 'changes to database', |
| \`date\` DATE NULL, |
| PRIMARY KEY (\`version_int\`) |
| ) |
| COMMENT='database schema control version' |
| COLLATE='utf8_general_ci' |
| ENGINE=InnoDB;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO \`schema_version\` (\`version_int\`, \`version\`, \`openvim_ver\`, \`comments\`, \`date\`) |
| VALUES (1, '0.1', '0.2.00', 'insert schema_version; alter nets with last_error column', '2015-05-05');" | $DBCMD |
| echo " ALTER TABLE \`nets\`, ADD COLUMN \`last_error\`" |
| echo "ALTER TABLE \`nets\` |
| ADD COLUMN \`last_error\` VARCHAR(200) NULL AFTER \`status\`;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_1(){ |
| echo " downgrade database from version 0.1 to version 0.0" |
| echo " ALTER TABLE \`nets\` DROP COLUMN \`last_error\`" |
| echo "ALTER TABLE \`nets\` DROP COLUMN \`last_error\`;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo " DROP TABLE \`schema_version\`" |
| echo "DROP TABLE \`schema_version\`;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function upgrade_to_2(){ |
| echo " upgrade database from version 0.1 to version 0.2" |
| echo " ALTER TABLE \`of_ports_pci_correspondence\` \`resources_port\` \`ports\` ADD COLUMN \`switch_dpid\`" |
| for table in of_ports_pci_correspondence resources_port ports |
| do |
| echo "ALTER TABLE \`${table}\` |
| ADD COLUMN \`switch_dpid\` CHAR(23) NULL DEFAULT NULL AFTER \`switch_port\`; " | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE ${table} CHANGE COLUMN switch_port switch_port VARCHAR(24) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| [ $table == of_ports_pci_correspondence ] || |
| echo "ALTER TABLE ${table} DROP INDEX vlan_switch_port, ADD UNIQUE INDEX vlan_switch_port (vlan, switch_port, switch_dpid);" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| done |
| echo " UPDATE procedure UpdateSwitchPort" |
| echo "DROP PROCEDURE IF EXISTS UpdateSwitchPort; |
| delimiter // |
| CREATE PROCEDURE UpdateSwitchPort() MODIFIES SQL DATA SQL SECURITY INVOKER |
| COMMENT 'Load the openflow switch ports from of_ports_pci_correspondece into resoureces_port and ports' |
| BEGIN |
| #DELETES switch_port entry before writing, because if not it fails for key constrains |
| UPDATE ports |
| RIGHT JOIN resources_port as RP on ports.uuid=RP.port_id |
| INNER JOIN resources_port as RP2 on RP2.id=RP.root_id |
| INNER JOIN numas on RP.numa_id=numas.id |
| INNER JOIN hosts on numas.host_id=hosts.uuid |
| INNER JOIN of_ports_pci_correspondence as PC on hosts.ip_name=PC.ip_name and RP2.pci=PC.pci |
| SET ports.switch_port=null, ports.switch_dpid=null, RP.switch_port=null, RP.switch_dpid=null; |
| #write switch_port into resources_port and ports |
| UPDATE ports |
| RIGHT JOIN resources_port as RP on ports.uuid=RP.port_id |
| INNER JOIN resources_port as RP2 on RP2.id=RP.root_id |
| INNER JOIN numas on RP.numa_id=numas.id |
| INNER JOIN hosts on numas.host_id=hosts.uuid |
| INNER JOIN of_ports_pci_correspondence as PC on hosts.ip_name=PC.ip_name and RP2.pci=PC.pci |
| SET ports.switch_port=PC.switch_port, ports.switch_dpid=PC.switch_dpid, RP.switch_port=PC.switch_port, RP.switch_dpid=PC.switch_dpid; |
| END// |
| delimiter ;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO \`schema_version\` (\`version_int\`, \`version\`, \`openvim_ver\`, \`comments\`, \`date\`) |
| VALUES (2, '0.2', '0.2.03', 'update Procedure UpdateSwitchPort', '2015-05-06');" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function upgrade_to_3(){ |
| echo " upgrade database from version 0.2 to version 0.3" |
| echo " change size of source_name at table resources_port" |
| echo "ALTER TABLE resources_port CHANGE COLUMN source_name source_name VARCHAR(24) NULL DEFAULT NULL AFTER port_id;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo " CREATE PROCEDURE GetAllAvailablePorts" |
| echo "delimiter // |
| CREATE PROCEDURE GetAllAvailablePorts(IN Numa INT) CONTAINS SQL SQL SECURITY INVOKER |
| COMMENT 'Obtain all -including those not connected to switch port- ports available for a numa' |
| BEGIN |
| SELECT port_id, pci, Mbps, Mbps - Mbps_consumed as Mbps_free, totalSRIOV - coalesce(usedSRIOV,0) as availableSRIOV, switch_port, mac |
| FROM |
| ( |
| SELECT id as port_id, Mbps, pci, switch_port, mac |
| FROM resources_port |
| WHERE numa_id = Numa AND id=root_id AND status = 'ok' AND instance_id IS NULL |
| ) as A |
| INNER JOIN |
| ( |
| SELECT root_id, sum(Mbps_used) as Mbps_consumed, COUNT(id)-1 as totalSRIOV |
| FROM resources_port |
| WHERE numa_id = Numa AND status = 'ok' |
| GROUP BY root_id |
| ) as B |
| ON A.port_id = B.root_id |
| LEFT JOIN |
| ( |
| SELECT root_id, COUNT(id) as usedSRIOV |
| FROM resources_port |
| WHERE numa_id = Numa AND status = 'ok' AND instance_id IS NOT NULL |
| GROUP BY root_id |
| ) as C |
| ON A.port_id = C.root_id |
| ORDER BY Mbps_free, availableSRIOV, pci; |
| END// |
| delimiter ;"| $DBCMD || ! ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (3, '0.3', '0.2.5', 'New Procedure GetAllAvailablePorts', '2015-07-09');"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function upgrade_to_4(){ |
| echo " upgrade database from version 0.3 to version 0.4" |
| echo " remove unique VLAN index at 'resources_port', 'ports'" |
| echo "ALTER TABLE resources_port DROP INDEX vlan_switch_port;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE ports DROP INDEX vlan_switch_port;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo " change table 'ports'" |
| echo "ALTER TABLE ports CHANGE COLUMN model model VARCHAR(12) NULL DEFAULT NULL COMMENT 'driver model for bridge ifaces; PF,VF,VFnotShared for data ifaces' AFTER mac;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE ports DROP COLUMN vlan_changed;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE resources_port DROP COLUMN vlan;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (4, '0.4', '0.3.1', 'Remove unique index VLAN at resources_port', '2015-09-04');"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function upgrade_to_X(){ |
| #TODO, this change of foreign key does not work |
| echo " upgrade database from version 0.X to version 0.X" |
| echo "ALTER TABLE instances DROP FOREIGN KEY FK_instances_flavors, DROP INDEX FK_instances_flavors, |
| DROP FOREIGN KEY FK_instances_images, DROP INDEX FK_instances_flavors,;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE instances |
| ADD CONSTRAINT FK_instances_flavors FOREIGN KEY (flavor_id, tenant_id) REFERENCES tenants_flavors (flavor_id, tenant_id), |
| ADD CONSTRAINT FK_instances_images FOREIGN KEY (image_id, tenant_id) REFERENCES tenants_images (image_id, tenant_id);" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function downgrade_from_2(){ |
| echo " downgrade database from version 0.2 to version 0.1" |
| echo " UPDATE procedure UpdateSwitchPort" |
| echo "DROP PROCEDURE IF EXISTS UpdateSwitchPort; |
| delimiter // |
| CREATE PROCEDURE UpdateSwitchPort() MODIFIES SQL DATA SQL SECURITY INVOKER |
| BEGIN |
| UPDATE |
| resources_port INNER JOIN ( |
| SELECT resources_port.id,KK.switch_port |
| FROM resources_port INNER JOIN numas on resources_port.numa_id=numas.id |
| INNER JOIN hosts on numas.host_id=hosts.uuid |
| INNER JOIN of_ports_pci_correspondence as KK on hosts.ip_name=KK.ip_name and resources_port.pci=KK.pci |
| ) as TABLA |
| ON resources_port.root_id=TABLA.id |
| SET resources_port.switch_port=TABLA.switch_port |
| WHERE resources_port.root_id=TABLA.id; |
| END// |
| delimiter ;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo " ALTER TABLE \`of_ports_pci_correspondence\` \`resources_port\` \`ports\` DROP COLUMN \`switch_dpid\`" |
| for table in of_ports_pci_correspondence resources_port ports |
| do |
| [ $table == of_ports_pci_correspondence ] || |
| echo "ALTER TABLE ${table} DROP INDEX vlan_switch_port, ADD UNIQUE INDEX vlan_switch_port (vlan, switch_port);" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE \`${table}\` DROP COLUMN \`switch_dpid\`;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| switch_port_size=12 |
| [ $table == of_ports_pci_correspondence ] && switch_port_size=50 |
| echo "ALTER TABLE ${table} CHANGE COLUMN switch_port switch_port VARCHAR(${switch_port_size}) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| done |
| echo "DELETE FROM \`schema_version\` WHERE \`version_int\` = '2';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_3(){ |
| echo " downgrade database from version 0.3 to version 0.2" |
| echo " change back size of source_name at table resources_port" |
| echo "ALTER TABLE resources_port CHANGE COLUMN source_name source_name VARCHAR(20) NULL DEFAULT NULL AFTER port_id;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo " DROP PROCEDURE GetAllAvailablePorts" |
| echo "DROP PROCEDURE GetAllAvailablePorts;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int = '3';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_4(){ |
| echo " downgrade database from version 0.4 to version 0.3" |
| echo " adding back unique index VLAN at 'resources_port','ports'" |
| echo "ALTER TABLE resources_port ADD COLUMN vlan SMALLINT(5) UNSIGNED NULL DEFAULT NULL AFTER Mbps_used;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "UPDATE resources_port SET vlan= 99+id-root_id WHERE id != root_id;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE resources_port ADD UNIQUE INDEX vlan_switch_port (vlan, switch_port, switch_dpid);" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE ports ADD UNIQUE INDEX vlan_switch_port (vlan, switch_port, switch_dpid);" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo " change back table 'ports'" |
| echo "ALTER TABLE ports CHANGE COLUMN model model VARCHAR(12) NULL DEFAULT NULL AFTER mac;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE ports ADD COLUMN vlan_changed SMALLINT(5) NULL DEFAULT NULL COMMENT '!=NULL when original vlan have been changed to match a pmp net with all ports in the same vlan' AFTER switch_port;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int = '4';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| |
| function upgrade_to_5(){ |
| echo " upgrade database from version 0.4 to version 0.5" |
| echo " add 'ip_address' to ports'" |
| echo "ALTER TABLE ports ADD COLUMN ip_address VARCHAR(64) NULL DEFAULT NULL AFTER mac;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (5, '0.5', '0.4.1', 'Add ip_address to ports', '2015-09-04');"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_5(){ |
| echo " downgrade database from version 0.5 to version 0.4" |
| echo " removing 'ip_address' from 'ports'" |
| echo "ALTER TABLE ports DROP COLUMN ip_address;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int = '5';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function upgrade_to_6(){ |
| echo " upgrade database from version 0.5 to version 0.6" |
| echo " Change enalarge name, description to 255 at all database" |
| for table in flavors images instances tenants |
| do |
| name_length=255 |
| [[ $table == tenants ]] || name_length=64 |
| echo -en " $table \r" |
| echo "ALTER TABLE $table CHANGE COLUMN name name VARCHAR($name_length) NOT NULL, CHANGE COLUMN description description VARCHAR(255) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| done |
| echo -en " hosts \r" |
| echo "ALTER TABLE hosts CHANGE COLUMN name name VARCHAR(255) NOT NULL, CHANGE COLUMN ip_name ip_name VARCHAR(64) NOT NULL, CHANGE COLUMN user user VARCHAR(64) NOT NULL, CHANGE COLUMN password password VARCHAR(64) NULL DEFAULT NULL, CHANGE COLUMN description description VARCHAR(255) NULL DEFAULT NULL, CHANGE COLUMN features features VARCHAR(255) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " nets \r" |
| echo "ALTER TABLE nets CHANGE COLUMN name name VARCHAR(255) NOT NULL, CHANGE COLUMN last_error last_error VARCHAR(255) NULL DEFAULT NULL, CHANGE COLUMN bind bind VARCHAR(36) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " instances \r" |
| echo "ALTER TABLE instances CHANGE COLUMN last_error last_error VARCHAR(255) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " ports \r" |
| echo "ALTER TABLE ports CHANGE COLUMN name name VARCHAR(64) NOT NULL, CHANGE COLUMN switch_port switch_port VARCHAR(64) NULL DEFAULT NULL, CHANGE COLUMN switch_dpid switch_dpid VARCHAR(64) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " of_flows \r" |
| echo "ALTER TABLE of_flows CHANGE COLUMN name name VARCHAR(64) NOT NULL, CHANGE COLUMN net_id net_id VARCHAR(36) NULL DEFAULT NULL, CHANGE COLUMN actions actions VARCHAR(255) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " of_ports_pci_cor... \r" |
| echo "ALTER TABLE of_ports_pci_correspondence CHANGE COLUMN ip_name ip_name VARCHAR(64) NULL DEFAULT NULL, CHANGE COLUMN switch_port switch_port VARCHAR(64) NULL DEFAULT NULL, CHANGE COLUMN switch_dpid switch_dpid VARCHAR(64) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " resources_port \r" |
| echo "ALTER TABLE resources_port CHANGE COLUMN source_name source_name VARCHAR(64) NULL DEFAULT NULL, CHANGE COLUMN switch_port switch_port VARCHAR(64) NULL DEFAULT NULL, CHANGE COLUMN switch_dpid switch_dpid VARCHAR(64) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (6, '0.6', '0.4.2', 'Enlarging name at database', '2016-02-01');" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_6(){ |
| echo " downgrade database from version 0.6 to version 0.5" |
| echo " Change back name,description to shorter length at all database" |
| for table in flavors images instances tenants |
| do |
| name_length=50 |
| [[ $table == flavors ]] || [[ $table == images ]] || name_length=36 |
| echo -en " $table \r" |
| echo "ALTER TABLE $table CHANGE COLUMN name name VARCHAR($name_length) NOT NULL, CHANGE COLUMN description description VARCHAR(100) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| done |
| echo -en " hosts \r" |
| echo "ALTER TABLE hosts CHANGE COLUMN name name VARCHAR(36) NOT NULL, CHANGE COLUMN ip_name ip_name VARCHAR(36) NOT NULL, CHANGE COLUMN user user VARCHAR(36) NOT NULL, CHANGE COLUMN password password VARCHAR(36) NULL DEFAULT NULL, CHANGE COLUMN description description VARCHAR(100) NULL DEFAULT NULL, CHANGE COLUMN features features VARCHAR(50) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " nets \r" |
| echo "ALTER TABLE nets CHANGE COLUMN name name VARCHAR(50) NOT NULL, CHANGE COLUMN last_error last_error VARCHAR(200) NULL DEFAULT NULL, CHANGE COLUMN bind bind VARCHAR(36) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " instances \r" |
| echo "ALTER TABLE instances CHANGE COLUMN last_error last_error VARCHAR(200) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " ports \r" |
| echo "ALTER TABLE ports CHANGE COLUMN name name VARCHAR(25) NULL DEFAULT NULL, CHANGE COLUMN switch_port switch_port VARCHAR(24) NULL DEFAULT NULL, CHANGE COLUMN switch_dpid switch_dpid VARCHAR(23) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " of_flows \r" |
| echo "ALTER TABLE of_flows CHANGE COLUMN name name VARCHAR(50) NULL DEFAULT NULL, CHANGE COLUMN net_id net_id VARCHAR(50) NULL DEFAULT NULL, CHANGE COLUMN actions actions VARCHAR(100) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " of_ports_pci_cor... \r" |
| echo "ALTER TABLE of_ports_pci_correspondence CHANGE COLUMN ip_name ip_name VARCHAR(50) NULL DEFAULT NULL, CHANGE COLUMN switch_port switch_port VARCHAR(24) NULL DEFAULT NULL, CHANGE COLUMN switch_dpid switch_dpid VARCHAR(23) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo -en " resources_port \r" |
| echo "ALTER TABLE resources_port CHANGE COLUMN source_name source_name VARCHAR(24) NULL DEFAULT NULL, CHANGE COLUMN switch_port switch_port VARCHAR(24) NULL DEFAULT NULL, CHANGE COLUMN switch_dpid switch_dpid VARCHAR(23) NULL DEFAULT NULL;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int='6';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function upgrade_to_7(){ |
| echo " upgrade database from version 0.6 to version 0.7" |
| echo " add 'bind_net','bind_type','cidr','enable_dhcp' to 'nets'" |
| echo "ALTER TABLE nets ADD COLUMN cidr VARCHAR(64) NULL DEFAULT NULL AFTER bind, ADD COLUMN enable_dhcp ENUM('true','false') NOT NULL DEFAULT 'false' after cidr, ADD COLUMN dhcp_first_ip VARCHAR(64) NULL DEFAULT NULL AFTER enable_dhcp, ADD COLUMN dhcp_last_ip VARCHAR(64) NULL DEFAULT NULL AFTER dhcp_first_ip;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE nets CHANGE COLUMN bind provider VARCHAR(36) NULL DEFAULT NULL AFTER vlan;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE nets ADD COLUMN bind_net VARCHAR(36) NULL DEFAULT NULL COMMENT 'To connect with other net' AFTER provider, ADD COLUMN bind_type VARCHAR(36) NULL DEFAULT NULL COMMENT 'VLAN:<tag> to insert/remove' after bind_net;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (7, '0.7', '0.4.5', 'Add bind_net to net table', '2016-02-12');"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_7(){ |
| echo " downgrade database from version 0.7 to version 0.6" |
| echo " removing 'bind_net','bind_type','cidr','enable_dhcp' from 'nets'" |
| echo "ALTER TABLE nets CHANGE COLUMN provider bind NULL DEFAULT NULL AFTER vlan;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE nets DROP COLUMN cidr, DROP COLUMN enable_dhcp, DROP COLUMN bind_net, DROP COLUMN bind_type, DROP COLUMN dhcp_first_ip, DROP COLUMN dhcp_last_ip;"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int = '7';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function upgrade_to_8(){ |
| echo " upgrade database from version 0.7 to version 0.8" |
| echo " add column 'checksum' to 'images'" |
| echo "ALTER TABLE images ADD COLUMN checksum VARCHAR(32) NULL AFTER name;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (8, '0.8', '0.4.10', 'add column checksum to images', '2016-09-30');"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_8(){ |
| echo " downgrade database from version 0.8 to version 0.7" |
| echo " remove column 'checksum' from 'images'" |
| echo "ALTER TABLE images DROP COLUMN checksum;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int = '8';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| function upgrade_to_9(){ |
| echo " upgrade database from version 0.8 to version 0.9" |
| echo " change length of columns 'path' and 'name' to 255 in table 'images', and change length of column 'name' to 255 in table 'flavors'" |
| echo "ALTER TABLE images CHANGE COLUMN path path VARCHAR(255) NOT NULL AFTER uuid, CHANGE COLUMN name name VARCHAR(255) NOT NULL AFTER path;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE flavors CHANGE COLUMN name name VARCHAR(255) NOT NULL AFTER uuid;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "INSERT INTO schema_version (version_int, version, openvim_ver, comments, date) VALUES (9, '0.9', '0.5.1', 'increase length of columns path and name to 255 in table images, and change length of column name to 255 in table flavors', '2017-01-10');"| $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| function downgrade_from_9(){ |
| echo " downgrade database from version 0.9 to version 0.8" |
| echo " change length of columns 'path' and 'name' to 100 and 64 in table 'images'" |
| echo "ALTER TABLE images CHANGE COLUMN path path VARCHAR(100) NOT NULL AFTER uuid, CHANGE COLUMN name name VARCHAR(64) NOT NULL AFTER path;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "ALTER TABLE flavors CHANGE COLUMN name name VARCHAR(64) NOT NULL AFTER uuid;" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| echo "DELETE FROM schema_version WHERE version_int = '9';" | $DBCMD || ! echo "ERROR. Aborted!" || exit -1 |
| } |
| |
| #TODO ... put funtions here |
| |
| |
| [ $DATABASE_TARGET_VER_NUM -eq $DATABASE_VER_NUM ] && echo " current database version $DATABASE_VER is ok" |
| #UPGRADE DATABASE step by step |
| while [ $DATABASE_TARGET_VER_NUM -gt $DATABASE_VER_NUM ] |
| do |
| DATABASE_VER_NUM=$((DATABASE_VER_NUM+1)) |
| upgrade_to_${DATABASE_VER_NUM} |
| #FILE_="${DIRNAME}/upgrade_to_${DATABASE_VER_NUM}.sh" |
| #[ ! -x "$FILE_" ] && echo "Error, can not find script '$FILE_' to upgrade" >&2 && exit -1 |
| #$FILE_ || exit -1 # if fail return |
| done |
| |
| #DOWNGRADE DATABASE step by step |
| while [ $DATABASE_TARGET_VER_NUM -lt $DATABASE_VER_NUM ] |
| do |
| #FILE_="${DIRNAME}/downgrade_from_${DATABASE_VER_NUM}.sh" |
| #[ ! -x "$FILE_" ] && echo "Error, can not find script '$FILE_' to downgrade" >&2 && exit -1 |
| #$FILE_ || exit -1 # if fail return |
| downgrade_from_${DATABASE_VER_NUM} |
| DATABASE_VER_NUM=$((DATABASE_VER_NUM-1)) |
| done |
| |
| #echo done |
| |