| #!/bin/bash |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| function usage(){ |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| echo -e "usage: $0 [OPTIONS]" |
| echo -e "Install OSM" |
| echo -e " OPTIONS" |
| echo -e " -h / --help: print this help" |
| echo -e " -y: do not prompt for confirmation, assumes yes" |
| echo -e " -r <repo>: use specified repository name for osm packages" |
| echo -e " -R <release>: use specified release for osm binaries (deb packages, lxd images, ...)" |
| echo -e " -u <repo base>: use specified repository url for osm packages" |
| echo -e " -k <repo key>: use specified repository public key url" |
| echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag" |
| echo -e " -b master (main dev branch)" |
| echo -e " -b v2.0 (v2.0 branch)" |
| echo -e " -b tags/v1.1.0 (a specific tag)" |
| echo -e " ..." |
| echo -e " -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)" |
| echo -e " -s <namespace> namespace when installed using k8s, default is osm" |
| echo -e " -H <VCA host> use specific juju host controller IP" |
| echo -e " -S <VCA secret> use VCA/juju secret key" |
| echo -e " -P <VCA pubkey> use VCA/juju public key file" |
| echo -e " -A <VCA apiproxy> use VCA/juju API proxy" |
| echo -e " --pla: install the PLA module for placement support" |
| echo -e " --old-sa: install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway" |
| echo -e " --ng-sa: install new Service Assurance framework (Airflow, AlertManager and Pushgateway) (enabled by default)" |
| echo -e " -m <MODULE>: install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)" |
| echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor, ng-sa)" |
| echo -e " -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/" |
| echo -e " -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack" |
| echo -e " -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack" |
| echo -e " -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack" |
| echo -e " -D <devops path> use local devops installation path" |
| echo -e " -w <work dir> Location to store runtime installation" |
| echo -e " -t <docker tag> specify osm docker tag (default is latest)" |
| echo -e " -l: LXD cloud yaml file" |
| echo -e " -L: LXD credentials yaml file" |
| echo -e " -K: Specifies the name of the controller to use - The controller must be already bootstrapped" |
| echo -e " -d <docker registry URL> use docker registry URL instead of dockerhub" |
| echo -e " -p <docker proxy URL> set docker proxy URL as part of docker CE configuration" |
| echo -e " -T <docker tag> specify docker tag for the modules specified with option -m" |
| echo -e " --debug: debug mode" |
| echo -e " --nocachelxdimages: do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)" |
| echo -e " --cachelxdimages: cache local lxd images, create cronjob for that cache (will make installation longer)" |
| echo -e " --nolxd: do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)" |
| echo -e " --nodocker: do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)" |
| echo -e " --nojuju: do not juju, assumes already installed" |
| echo -e " --nodockerbuild:do not build docker images (use existing locally cached images)" |
| echo -e " --nohostports: do not expose docker ports to host (useful for creating multiple instances of osm on the same host)" |
| echo -e " --nohostclient: do not install the osmclient" |
| echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules" |
| echo -e " --source: install OSM from source code using the latest stable tag" |
| echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch" |
| echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano" |
| echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana" |
| echo -e " --volume: create a VM volume when installing to OpenStack" |
| echo -e " --showopts: print chosen options and exit (only for debugging)" |
| echo -e " --charmed: Deploy and operate OSM with Charms on k8s" |
| echo -e " [--bundle <bundle path>]: Specify with which bundle to deploy OSM with charms (--charmed option)" |
| echo -e " [--k8s <kubeconfig path>]: Specify with which kubernetes to deploy OSM with charms (--charmed option)" |
| echo -e " [--vca <name>]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)" |
| echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)" |
| echo -e " [--lxd <yaml path>]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)" |
| echo -e " [--lxd-cred <yaml path>]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)" |
| echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)" |
| echo -e " [--overlay]: Add an overlay to override some defaults of the default bundle (--charmed option)" |
| echo -e " [--ha]: Installs High Availability bundle. (--charmed option)" |
| echo -e " [--tag]: Docker image tag. (--charmed option)" |
| echo -e " [--registry]: Docker registry with optional credentials as user:pass@hostname:port (--charmed option)" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| # takes a juju/accounts.yaml file and returns the password specific |
| # for a controller. I wrote this using only bash tools to minimize |
| # additions of other packages |
| function parse_juju_password { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| password_file="${HOME}/.local/share/juju/accounts.yaml" |
| local controller_name=$1 |
| local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034') |
| sed -ne "s|^\($s\):|\1|" \ |
| -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \ |
| -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file | |
| awk -F$fs -v controller=$controller_name '{ |
| indent = length($1)/2; |
| vname[indent] = $2; |
| for (i in vname) {if (i > indent) {delete vname[i]}} |
| if (length($3) > 0) { |
| vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")} |
| if (match(vn,controller) && match($2,"password")) { |
| printf("%s",$3); |
| } |
| } |
| }' |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function set_vca_variables() { |
| OSM_VCA_CLOUDNAME="lxd-cloud" |
| [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost" |
| if [ -z "$OSM_VCA_HOST" ]; then |
| [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'` |
| [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'` |
| [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address" |
| fi |
| if [ -z "$OSM_VCA_SECRET" ]; then |
| [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE) |
| [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME) |
| [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret" |
| fi |
| if [ -z "$OSM_VCA_PUBKEY" ]; then |
| OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub) |
| [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key" |
| fi |
| if [ -z "$OSM_VCA_CACERT" ]; then |
| [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n) |
| [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n) |
| [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate" |
| fi |
| } |
| |
| function generate_secret() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32 |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function check_packages() { |
| NEEDED_PACKAGES="$1" |
| echo -e "Checking required packages: ${NEEDED_PACKAGES}" |
| for PACKAGE in ${NEEDED_PACKAGES} ; do |
| dpkg -L ${PACKAGE} |
| if [ $? -ne 0 ]; then |
| echo -e "Package ${PACKAGE} is not installed." |
| echo -e "Updating apt-cache ..." |
| sudo apt-get update |
| echo -e "Installing ${PACKAGE} ..." |
| sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}" |
| fi |
| done |
| echo -e "Required packages are present: ${NEEDED_PACKAGES}" |
| } |
| |
| function ask_user(){ |
| # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive |
| # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed |
| # Return: true(0) if user type 'yes'; false (1) if user type 'no' |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| read -e -p "$1" USER_CONFIRMATION |
| while true ; do |
| [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0 |
| [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1 |
| [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0 |
| [ "${USER_CONFIRMATION,,}" == "no" ] || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1 |
| read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION |
| done |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function install_osmclient(){ |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| CLIENT_RELEASE=${RELEASE#"-R "} |
| CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg" |
| CLIENT_REPOSITORY=${REPOSITORY#"-r "} |
| CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "} |
| key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY |
| curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add - |
| sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM" |
| sudo apt-get -y update |
| sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip |
| sudo -H LC_ALL=C python3 -m pip install -U pip |
| sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient |
| if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then |
| python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt |
| fi |
| if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then |
| sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libmagic1 |
| python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt |
| fi |
| [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'` |
| [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'` |
| echo -e "\nOSM client installed" |
| if [ -z "$INSTALL_LIGHTWEIGHT" ]; then |
| echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:" |
| echo " export OSM_HOSTNAME=${OSM_HOSTNAME}" |
| echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}" |
| else |
| echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)." |
| echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:" |
| echo " export OSM_HOSTNAME=<OSM_host>" |
| fi |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| return 0 |
| } |
| |
| function docker_login() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| echo "Docker login" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}" |
| sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function generate_docker_images() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| echo "Generating docker images" |
| _build_from=$COMMIT_ID |
| [ -z "$_build_from" ] && _build_from="latest" |
| echo "OSM Docker images generated from $_build_from" |
| LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")" |
| trap 'rm -rf "${LWTEMPDIR}"' EXIT |
| for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do |
| if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then |
| module_lower=${module,,} |
| if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then |
| continue |
| fi |
| git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module |
| git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID} |
| sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image" |
| fi |
| done |
| if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then |
| BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY") |
| BUILD_ARGS+=(--build-arg RELEASE="$RELEASE") |
| BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY") |
| BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE") |
| sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ." |
| fi |
| echo "Finished generation of docker images" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function cmp_overwrite() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| file1="$1" |
| file2="$2" |
| if ! $(cmp "${file1}" "${file2}" >/dev/null 2>&1); then |
| if [ -f "${file2}" ]; then |
| ask_user "The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2} |
| else |
| cp -b ${file1} ${file2} |
| fi |
| fi |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| #deploys osm pods and services |
| function deploy_osm_services() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| # helm is already installed as part of install_kubeadm_cluster.sh |
| |
| # Generate helm values to be passed with -f osm-values.yaml |
| sudo mkdir -p ${OSM_HELM_WORK_DIR} |
| sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml |
| vca: |
| pubkey: \"${OSM_VCA_PUBKEY}\" |
| EOF" |
| |
| # Generate helm values to be passed with --set |
| OSM_HELM_OPTS="" |
| # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false" |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}" |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}" |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}" |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}" |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}" |
| [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}" |
| [ ! "$OSM_DOCKER_TAG" == "14" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag=${OSM_DOCKER_TAG}" |
| [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true" |
| if [ -n "${OSM_BEHIND_PROXY}" ]; then |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true" |
| [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=\"${HTTP_PROXY}\"" |
| [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=\"${HTTPS_PROXY}\"" |
| if [ -n "${NO_PROXY}" ]; then |
| if [[ ! "${NO_PROXY}" =~ .*".svc".* ]]; then |
| NO_PROXY="${NO_PROXY},.svc" |
| fi |
| if [[ ! "${NO_PROXY}" =~ .*".cluster.local".* ]]; then |
| NO_PROXY="${NO_PROXY},.cluster.local" |
| fi |
| OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=\"${NO_PROXY//,/\,}\"" |
| fi |
| fi |
| |
| echo "helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}" |
| helm -n $OSM_NAMESPACE install $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm -f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS} |
| |
| # Override existing values.yaml with the final values.yaml used to install OSM |
| helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| #deploy charmed services |
| function deploy_charmed_services() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME |
| juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| #deploy mongodb |
| function deploy_mongodb() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}" |
| [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}" |
| $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \ |
| FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function install_osm_ngsa_service() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}" |
| [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}" |
| $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \ |
| FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function add_local_k8scluster() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| /usr/bin/osm --all-projects vim-create \ |
| --name _system-osm-vim \ |
| --account_type dummy \ |
| --auth_url http://dummy \ |
| --user osm --password osm --tenant osm \ |
| --description "dummy" \ |
| --config '{management_network_name: mgmt}' |
| /usr/bin/osm --all-projects k8scluster-add \ |
| --creds ${HOME}/.kube/config \ |
| --vim _system-osm-vim \ |
| --k8s-nets '{"net1": null}' \ |
| --version '1.15' \ |
| --description "OSM Internal Cluster" \ |
| _system-osm-k8s |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function configure_apt_proxy() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| OSM_APT_PROXY=$1 |
| OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt" |
| echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}" |
| if [ ! -f ${OSM_APT_PROXY_FILE} ]; then |
| sudo bash -c "cat <<EOF > ${OSM_APT_PROXY} |
| Acquire::http { Proxy \"${OSM_APT_PROXY}\"; } |
| EOF" |
| else |
| sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE} |
| fi |
| sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}" |
| track prereq apt_proxy_configured_ok |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function ask_proceed() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| |
| [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following |
| 1. Install and configure LXD |
| 2. Install juju |
| 3. Install docker CE |
| 4. Disable swap space |
| 5. Install and initialize Kubernetes |
| as pre-requirements. |
| Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1 |
| |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function check_osm_behind_proxy() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| |
| export OSM_BEHIND_PROXY="" |
| export OSM_PROXY_ENV_VARIABLES="" |
| [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy" |
| [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy" |
| [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY" |
| [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY" |
| [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy" |
| [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY" |
| |
| echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}" |
| echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}" |
| |
| if [ -n "${OSM_BEHIND_PROXY}" ]; then |
| [ -z "$ASSUME_YES" ] && ! ask_user " |
| The following env variables have been found for the current user: |
| ${OSM_PROXY_ENV_VARIABLES}. |
| |
| This suggests that this machine is behind a proxy and a special configuration is required. |
| The installer will install Docker CE, LXD and Juju to work behind a proxy using those |
| env variables. |
| |
| Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap. |
| Depending on the program, the env variables to work behind a proxy might be different |
| (e.g. http_proxy vs HTTP_PROXY). |
| |
| For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY |
| and HTTPS_PROXY are defined. |
| |
| Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that |
| those env variables are also set for root user. If you are not sure whether those variables |
| are configured for the root user, you can stop the installation now. |
| |
| Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1 |
| else |
| echo "This machine is not behind a proxy" |
| fi |
| |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function find_devops_folder() { |
| if [ -z "$OSM_DEVOPS" ]; then |
| if [ -n "$TEST_INSTALLER" ]; then |
| echo -e "\nUsing local devops repo for OSM installation" |
| OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))" |
| else |
| echo -e "\nCreating temporary dir for OSM installation" |
| OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")" |
| trap 'rm -rf "$OSM_DEVOPS"' EXIT |
| git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS |
| fi |
| fi |
| } |
| |
| function install_osm() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| |
| trap ctrl_c INT |
| |
| |
| check_osm_behind_proxy |
| check_packages "git wget curl tar snapd" |
| sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works" |
| find_devops_folder |
| |
| track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none |
| |
| track checks checkingroot_ok |
| [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges." |
| track checks noroot_ok |
| ask_proceed |
| track checks proceed_ok |
| |
| echo "Installing OSM" |
| |
| [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url |
| |
| echo "Determining IP address of the interface with the default route" |
| [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}') |
| [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}') |
| [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0" |
| OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'` |
| [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route" |
| |
| # configure apt proxy |
| [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL |
| |
| # if no host is passed in, we need to install lxd, unless explicilty asked not to |
| if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then |
| LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}" |
| [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P" |
| $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed" |
| fi |
| |
| track prereq prereqok_ok |
| |
| if [ ! -n "$INSTALL_NODOCKER" ]; then |
| DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}" |
| [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}" |
| [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P" |
| $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed" |
| fi |
| |
| track docker_ce docker_ce_ok |
| |
| echo "Creating folders for installation" |
| [ ! -d "$OSM_WORK_DIR" ] && sudo mkdir -p $OSM_WORK_DIR |
| sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_WORK_DIR/kubeadm-config.yaml |
| |
| $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \ |
| FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed" |
| track k8scluster k8scluster_ok |
| |
| JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}" |
| [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}" |
| [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}" |
| [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}" |
| [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}" |
| [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P" |
| $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed" |
| set_vca_variables |
| track juju juju_ok |
| |
| # Deploy OSM services |
| [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images |
| track docker_images docker_images_ok |
| |
| deploy_mongodb |
| track deploy_osm deploy_mongodb_ok |
| deploy_osm_services |
| track deploy_osm deploy_osm_services_k8s_ok |
| if [ -n "$INSTALL_K8S_MONITOR" ]; then |
| # install OSM MONITORING |
| install_k8s_monitoring |
| track deploy_osm install_k8s_monitoring_ok |
| fi |
| if [ -n "$INSTALL_NGSA" ]; then |
| # optional NGSA install |
| install_osm_ngsa_service |
| track deploy_osm install_osm_ngsa_ok |
| fi |
| |
| [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient |
| track osmclient osmclient_ok |
| |
| echo -e "Checking OSM health state..." |
| $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \ |
| (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \ |
| echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \ |
| track healthchecks osm_unhealthy didnotconverge) |
| track healthchecks after_healthcheck_ok |
| |
| add_local_k8scluster |
| track final_ops add_local_k8scluster_ok |
| |
| arrange_docker_default_network_policy |
| |
| wget -q -O- https://osm-download.etsi.org/ftp/osm-14.0-fourteen/README2.txt &> /dev/null |
| track end |
| sudo find /etc/osm |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| return 0 |
| } |
| |
| function install_to_openstack() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| |
| if [ -z "$2" ]; then |
| FATAL "OpenStack installer requires a valid external network name" |
| fi |
| |
| # Install Pip for Python3 |
| sudo apt install -y python3-pip python3-venv |
| sudo -H LC_ALL=C python3 -m pip install -U pip |
| |
| # Create a venv to avoid conflicts with the host installation |
| python3 -m venv $OPENSTACK_PYTHON_VENV |
| |
| source $OPENSTACK_PYTHON_VENV/bin/activate |
| |
| # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train |
| python -m pip install -U wheel |
| python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11" |
| |
| # Install the Openstack cloud module (ansible>=2.10) |
| ansible-galaxy collection install openstack.cloud |
| |
| export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg" |
| |
| OSM_INSTALLER_ARGS="${REPO_ARGS[@]}" |
| |
| ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME" |
| |
| if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then |
| ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE" |
| fi |
| |
| if [ -n "$OPENSTACK_USERDATA_FILE" ]; then |
| ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE" |
| fi |
| |
| # Execute the Ansible playbook based on openrc or clouds.yaml |
| if [ -e "$1" ]; then |
| . $1 |
| ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \ |
| $OSM_DEVOPS/installers/openstack/site.yml |
| else |
| ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \ |
| -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml |
| fi |
| |
| # Exit from venv |
| deactivate |
| |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| return 0 |
| } |
| |
| function arrange_docker_default_network_policy() { |
| echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other." |
| sudo iptables -I DOCKER-USER -j ACCEPT |
| sudo iptables-save | sudo tee /etc/iptables/rules.v4 |
| sudo ip6tables-save | sudo tee /etc/iptables/rules.v6 |
| } |
| |
| function install_k8s_monitoring() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| # install OSM monitoring |
| sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh |
| sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function dump_vars(){ |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| echo "APT_PROXY_URL=$APT_PROXY_URL" |
| echo "DEVELOP=$DEVELOP" |
| echo "DEBUG_INSTALL=$DEBUG_INSTALL" |
| echo "DOCKER_NOBUILD=$DOCKER_NOBUILD" |
| echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL" |
| echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL" |
| echo "DOCKER_USER=$DOCKER_USER" |
| echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES" |
| echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE" |
| echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR" |
| echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT" |
| echo "INSTALL_LXD=$INSTALL_LXD" |
| echo "INSTALL_NGSA=$INSTALL_NGSA" |
| echo "INSTALL_NODOCKER=$INSTALL_NODOCKER" |
| echo "INSTALL_NOJUJU=$INSTALL_NOJUJU" |
| echo "INSTALL_NOLXD=$INSTALL_NOLXD" |
| echo "INSTALL_ONLY=$INSTALL_ONLY" |
| echo "INSTALL_PLA=$INSTALL_PLA" |
| echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK" |
| echo "INSTALL_VIMEMU=$INSTALL_VIMEMU" |
| echo "NO_HOST_PORTS=$NO_HOST_PORTS" |
| echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME" |
| echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD" |
| echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME" |
| echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE" |
| echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE" |
| echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME" |
| echo "OSM_DEVOPS=$OSM_DEVOPS" |
| echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG" |
| echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR" |
| echo "OSM_NAMESPACE=$OSM_NAMESPACE" |
| echo "OSM_VCA_HOST=$OSM_VCA_HOST" |
| echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY" |
| echo "OSM_VCA_SECRET=$OSM_VCA_SECRET" |
| echo "OSM_WORK_DIR=$OSM_WORK_DIR" |
| echo "PULL_IMAGES=$PULL_IMAGES" |
| echo "RECONFIGURE=$RECONFIGURE" |
| echo "RELEASE=$RELEASE" |
| echo "REPOSITORY=$REPOSITORY" |
| echo "REPOSITORY_BASE=$REPOSITORY_BASE" |
| echo "REPOSITORY_KEY=$REPOSITORY_KEY" |
| echo "SHOWOPTS=$SHOWOPTS" |
| echo "TEST_INSTALLER=$TEST_INSTALLER" |
| echo "TO_REBUILD=$TO_REBUILD" |
| echo "UNINSTALL=$UNINSTALL" |
| echo "UPDATE=$UPDATE" |
| echo "Install from specific refspec (-b): $COMMIT_ID" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function parse_docker_registry_url() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}') |
| DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}') |
| DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}') |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| function ctrl_c() { |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function |
| echo "** Trapped CTRL-C" |
| FATAL "User stopped the installation" |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function |
| } |
| |
| UNINSTALL="" |
| DEVELOP="" |
| UPDATE="" |
| RECONFIGURE="" |
| TEST_INSTALLER="" |
| INSTALL_LXD="" |
| SHOWOPTS="" |
| COMMIT_ID="" |
| ASSUME_YES="" |
| APT_PROXY_URL="" |
| INSTALL_FROM_SOURCE="" |
| DEBUG_INSTALL="" |
| RELEASE="ReleaseTEN" |
| REPOSITORY="stable" |
| INSTALL_K8S_MONITOR="" |
| INSTALL_NGSA="y" |
| INSTALL_PLA="" |
| INSTALL_VIMEMU="" |
| LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd" |
| LXD_REPOSITORY_PATH="" |
| INSTALL_LIGHTWEIGHT="y" |
| INSTALL_TO_OPENSTACK="" |
| OPENSTACK_OPENRC_FILE_OR_CLOUD="" |
| OPENSTACK_PUBLIC_NET_NAME="" |
| OPENSTACK_ATTACH_VOLUME="false" |
| OPENSTACK_SSH_KEY_FILE="" |
| OPENSTACK_USERDATA_FILE="" |
| OPENSTACK_VM_NAME="server-osm" |
| OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm" |
| INSTALL_ONLY="" |
| TO_REBUILD="" |
| INSTALL_NOLXD="" |
| INSTALL_NODOCKER="" |
| INSTALL_NOJUJU="" |
| INSTALL_NOHOSTCLIENT="" |
| INSTALL_CACHELXDIMAGES="" |
| OSM_DEVOPS= |
| OSM_VCA_HOST= |
| OSM_VCA_SECRET= |
| OSM_VCA_PUBKEY= |
| OSM_VCA_CLOUDNAME="localhost" |
| OSM_VCA_K8S_CLOUDNAME="k8scloud" |
| OSM_NAMESPACE=osm |
| NO_HOST_PORTS="" |
| DOCKER_NOBUILD="" |
| REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg" |
| REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian" |
| OSM_WORK_DIR="/etc/osm" |
| OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm" |
| OSM_HOST_VOL="/var/lib/osm" |
| OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}" |
| OSM_DOCKER_TAG=latest |
| DOCKER_USER=opensourcemano |
| PULL_IMAGES="y" |
| KAFKA_TAG=2.11-1.0.2 |
| KIWIGRID_K8S_SIDECAR_TAG="1.15.6" |
| PROMETHEUS_TAG=v2.28.1 |
| GRAFANA_TAG=8.1.1 |
| PROMETHEUS_NODE_EXPORTER_TAG=0.18.1 |
| PROMETHEUS_CADVISOR_TAG=latest |
| KEYSTONEDB_TAG=10 |
| OSM_DATABASE_COMMONKEY= |
| ELASTIC_VERSION=6.4.2 |
| ELASTIC_CURATOR_VERSION=5.5.4 |
| POD_NETWORK_CIDR=10.244.0.0/16 |
| K8S_MANIFEST_DIR="/etc/kubernetes/manifests" |
| RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$' |
| DOCKER_REGISTRY_URL= |
| DOCKER_PROXY_URL= |
| MODULE_DOCKER_TAG= |
| OSM_INSTALLATION_TYPE="Default" |
| |
| while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do |
| case "${o}" in |
| a) |
| APT_PROXY_URL=${OPTARG} |
| ;; |
| b) |
| COMMIT_ID=${OPTARG} |
| PULL_IMAGES="" |
| ;; |
| r) |
| REPOSITORY="${OPTARG}" |
| REPO_ARGS+=(-r "$REPOSITORY") |
| ;; |
| k) |
| REPOSITORY_KEY="${OPTARG}" |
| REPO_ARGS+=(-k "$REPOSITORY_KEY") |
| ;; |
| u) |
| REPOSITORY_BASE="${OPTARG}" |
| REPO_ARGS+=(-u "$REPOSITORY_BASE") |
| ;; |
| R) |
| RELEASE="${OPTARG}" |
| REPO_ARGS+=(-R "$RELEASE") |
| ;; |
| D) |
| OSM_DEVOPS="${OPTARG}" |
| ;; |
| o) |
| INSTALL_ONLY="y" |
| [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue |
| [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue |
| ;; |
| O) |
| INSTALL_TO_OPENSTACK="y" |
| if [ -n "${OPTARG}" ]; then |
| OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}" |
| else |
| echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2 |
| usage && exit 1 |
| fi |
| ;; |
| f) |
| OPENSTACK_SSH_KEY_FILE="${OPTARG}" |
| ;; |
| F) |
| OPENSTACK_USERDATA_FILE="${OPTARG}" |
| ;; |
| N) |
| OPENSTACK_PUBLIC_NET_NAME="${OPTARG}" |
| ;; |
| m) |
| [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue |
| [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue |
| [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue |
| [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue |
| [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue |
| [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue |
| [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue |
| [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue |
| [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue |
| [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue |
| [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue |
| [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue |
| [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue |
| [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue |
| [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue |
| ;; |
| H) |
| OSM_VCA_HOST="${OPTARG}" |
| ;; |
| S) |
| OSM_VCA_SECRET="${OPTARG}" |
| ;; |
| s) |
| OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0 |
| ;; |
| t) |
| OSM_DOCKER_TAG="${OPTARG}" |
| REPO_ARGS+=(-t "$OSM_DOCKER_TAG") |
| ;; |
| U) |
| DOCKER_USER="${OPTARG}" |
| ;; |
| P) |
| OSM_VCA_PUBKEY=$(cat ${OPTARG}) |
| ;; |
| A) |
| OSM_VCA_APIPROXY="${OPTARG}" |
| ;; |
| l) |
| LXD_CLOUD_FILE="${OPTARG}" |
| ;; |
| L) |
| LXD_CRED_FILE="${OPTARG}" |
| ;; |
| K) |
| CONTROLLER_NAME="${OPTARG}" |
| ;; |
| d) |
| DOCKER_REGISTRY_URL="${OPTARG}" |
| ;; |
| p) |
| DOCKER_PROXY_URL="${OPTARG}" |
| ;; |
| T) |
| MODULE_DOCKER_TAG="${OPTARG}" |
| ;; |
| -) |
| [ "${OPTARG}" == "help" ] && usage && exit 0 |
| [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue |
| [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue |
| [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue |
| [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue |
| [ "${OPTARG}" == "update" ] && UPDATE="y" && continue |
| [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue |
| [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue |
| [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue |
| [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue |
| [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue |
| [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue |
| [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue |
| [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue |
| [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue |
| [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue |
| [ "${OPTARG}" == "pullimages" ] && continue |
| [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue |
| [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue |
| [ "${OPTARG}" == "bundle" ] && continue |
| [ "${OPTARG}" == "k8s" ] && continue |
| [ "${OPTARG}" == "lxd" ] && continue |
| [ "${OPTARG}" == "lxd-cred" ] && continue |
| [ "${OPTARG}" == "microstack" ] && continue |
| [ "${OPTARG}" == "overlay" ] && continue |
| [ "${OPTARG}" == "only-vca" ] && continue |
| [ "${OPTARG}" == "small-profile" ] && continue |
| [ "${OPTARG}" == "vca" ] && continue |
| [ "${OPTARG}" == "ha" ] && continue |
| [ "${OPTARG}" == "tag" ] && continue |
| [ "${OPTARG}" == "registry" ] && continue |
| [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue |
| [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue |
| [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue |
| [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue |
| [ "${OPTARG}" == "nocachelxdimages" ] && continue |
| [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue |
| echo -e "Invalid option: '--$OPTARG'\n" >&2 |
| usage && exit 1 |
| ;; |
| :) |
| echo "Option -$OPTARG requires an argument" >&2 |
| usage && exit 1 |
| ;; |
| \?) |
| echo -e "Invalid option: '-$OPTARG'\n" >&2 |
| usage && exit 1 |
| ;; |
| h) |
| usage && exit 0 |
| ;; |
| y) |
| ASSUME_YES="y" |
| ;; |
| *) |
| usage && exit 1 |
| ;; |
| esac |
| done |
| |
| source $OSM_DEVOPS/common/all_funcs |
| |
| [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on |
| [ -n "$SHOWOPTS" ] && dump_vars && exit 0 |
| |
| # Uninstall if "--uninstall" |
| if [ -n "$UNINSTALL" ]; then |
| if [ -n "$CHARMED" ]; then |
| ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \ |
| FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed" |
| else |
| ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \ |
| FATAL_TRACK community_uninstall "uninstall_osm.sh failed" |
| fi |
| echo -e "\nDONE" |
| exit 0 |
| fi |
| |
| # Installation starts here |
| |
| # Get README and create OSM_TRACK_INSTALLATION_ID |
| wget -q -O- https://osm-download.etsi.org/ftp/osm-14.0-fourteen/README.txt &> /dev/null |
| export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)" |
| |
| # Get OS info to be tracked |
| os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}') |
| echo $os_distro |
| os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}') |
| echo $os_release |
| os_info="${os_distro}_${os_release}" |
| os_info="${os_info// /_}" |
| |
| # Charmed installation |
| if [ -n "$CHARMED" ]; then |
| sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works" |
| ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \ |
| FATAL_TRACK charmed_install "charmed_install.sh failed" |
| wget -q -O- https://osm-download.etsi.org/ftp/osm-14.0-fourteen/README2.txt &> /dev/null |
| echo -e "\nDONE" |
| exit 0 |
| fi |
| |
| # Installation to Openstack |
| if [ -n "$INSTALL_TO_OPENSTACK" ]; then |
| install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME |
| echo -e "\nDONE" |
| exit 0 |
| fi |
| |
| # Community_installer |
| # Check incompatible options |
| [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options" |
| [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option" |
| # Special cases go first |
| # if develop, we force master |
| [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master" |
| [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring |
| [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service |
| [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0 |
| # This is where installation starts |
| install_osm |
| echo -e "\nDONE" |
| exit 0 |