test/basictest.sh - osm/RO - Gitiles

 #!/bin/bash

 ##
 # Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
 # This file is part of openmano
 # All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"); you may
 # not use this file except in compliance with the License. You may obtain
 # a copy of the License at
 #
 #         http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 # License for the specific language governing permissions and limitations
 # under the License.
 #
 # For those usages not covered by the Apache License, Version 2.0 please
 # contact with: nfvlabs@tid.es
 ##

 #This script can be used as a basic test of openmano.
 #WARNING: It destroy the database content


 function usage(){
     echo -e "usage: ${BASH_SOURCE[0]} [OPTIONS] <action>\n  test openmano using openvim as a VIM"
     echo -e "           the OPENVIM_HOST, OPENVIM_PORT shell variables indicate openvim location"
     echo -e "           by default localhost:9080"
     echo -e "  <action> is a list of the following items (by default 'reset create delete')"
     echo -e "    reset     reset the openmano database content"
     echo -e "    create    creates items"
     echo -e "    delete    delete created items"
     echo -e "  OPTIONS:"
     echo -e "    -f --force       does not prompt for confirmation"
     echo -e "    -h --help        shows this help"
     echo -e "    --screen         forces to run openmano (and openvim) service in a screen"
     echo -e "    --insert-bashrc  insert the created tenant,datacenter variables at"
     echo -e "                     ~/.bashrc to be available by openmano CLI"
     echo -e "    --install-openvim   install openvim in test mode"
     echo -e "    --init-openvim   if openvim runs locally, an init is called to clean openvim"
     echo -e "                      database and add fake hosts"
 }

 function is_valid_uuid(){
     echo "$1" | grep -q -E '^[0-9a-f]{8}-([0-9a-f]{4}-){3}[0-9a-f]{12}$' && return 0
     return 1
 }

 #detect if is called with a source to use the 'exit'/'return' command for exiting
 DIRNAME=$(dirname $(readlink -f ${BASH_SOURCE[0]}))
 DIRmano=$(dirname $DIRNAME)
 DIRscript=${DIRmano}/scripts

 [[ ${BASH_SOURCE[0]} != $0 ]] && _exit="return" || _exit="exit"


 #process options
 source ${DIRscript}/get-options.sh "force:f help:h insert-bashrc init-openvim install-openvim screen" $* || $_exit 1

 #help
 [ -n "$option_help" ] && usage && $_exit 0

 #check correct arguments
 force_param="" && [[ -n "$option_force" ]] && force_param=" -f"
 insert_bashrc_param="" && [[ -n "$option_insert_bashrc" ]] && insert_bashrc_param=" --insert-bashrc"
 screen_mano_param="" && [[ -n "$option_screen" ]] && screen_mano_param=" --screen-name=mano"
 screen_vim_param=""  && [[ -n "$option_screen" ]] && screen_vim_param=" --screen-name=vim"

 action_list=""

 for argument in $params
 do
     if [[ $argument == reset ]] || [[ $argument == create ]] || [[ $argument == delete ]] || [[ -z "$argument" ]]
     then
         action_list="$action_list $argument"
         continue
     fi
     echo "invalid argument '$argument'?  Type -h for help" >&2 && $_exit 1
 done

 export OPENMANO_HOST=localhost
 export OPENMANO_PORT=9090
 [[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_HOST=localhost"  >> ~/.bashrc
 [[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_PORT=9090"  >> ~/.bashrc


 #by default action should be reset and create
 [[ -z $action_list ]]  && action_list="reset create delete"

 if [[ -n "$option_install_openvim" ]]
 then
     mkdir -p ${DIRNAME}/local
     pushd ${DIRNAME}/local
     echo "installing openvim at  ${DIRNAME}/openvim ... "
     wget -O install-openvim.sh "https://osm.etsi.org/gitweb/?p=osm/openvim.git;a=blob_plain;f=scripts/install-openvim.sh"
     chmod +x install-openvim.sh
     sudo ./install-openvim.sh --no-install-packages --force --quiet --develop
     export alias initopenvim="${PWD}/openvim/scripts/initopenvim.sh"
     export alias openvim="${PWD}/openvim/scripts/openvim"
     option_init_openvim=""
     ${DIRNAME}/local/openvim/scripts/initopenvim.sh${force_param}${insert_bashrc_param}${screen_vim_param} || echo "WARNING openvim cannot be initialized. The rest of test can fail!"

     popd
 fi
 [[ -z "$option_init_openvim" ]] || initopenvim${force_param}${insert_bashrc_param}${screen_vim_param} || echo "WARNING openvim cannot be initialized. The rest of test can fail!"

 #check openvim client variables are set
 #fail=""
 #[[ -z $OPENVIM_HOST ]] && echo "OPENVIM_HOST variable not defined" >&2 && fail=1
 #[[ -z $OPENVIM_PORT ]] && echo "OPENVIM_PORT variable not defined" >&2 && fail=1
 #[[ -n $fail ]] && $_exit 1


 for action in $action_list
 do
 #if [[ $action == "install-openvim" ]]
     #echo "Installing and starting openvim"
     #mkdir -p temp
     #pushd temp
     #wget https://github.com/nfvlabs/openvim/raw/v0.4/scripts/install-openvim.sh
     #chmod -x install-openvim.sh
 #fi

 if [[ $action == "reset" ]]
 then

     #ask for confirmation if argument is not -f --force
     force_=y
     [[ -z "$option_force" ]] && read -e -p "WARNING: reset openmano database, content will be lost!!! Continue(y/N) " force_
     [[ $force_ != y ]] && [[ $force_ != yes ]] && echo "aborted!" && $_exit

     echo "Stopping openmano"
     $DIRscript/service-openmano.sh mano stop${screen_mano_param}
     echo "Initializing openmano database"
     $DIRmano/database_utils/init_mano_db.sh -u mano -p manopw --createdb
     echo "Starting openmano"
     $DIRscript/service-openmano.sh mano start${screen_mano_param}
     echo

 elif [[ $action == "delete" ]]
 then
     result=`openmano tenant-list TEST-tenant`
     nfvotenant=`echo $result |gawk '{print $1}'`
     #check a valid uuid is obtained
     is_valid_uuid $nfvotenant || ! echo "Tenant TEST-tenant not found. Already delete?" >&2 || $_exit 1
     export OPENMANO_TENANT=$nfvotenant
     ${DIRmano}/openmano instance-scenario-delete -f simple-instance     || echo "fail"
     ${DIRmano}/openmano instance-scenario-delete -f complex-instance    || echo "fail"
     ${DIRmano}/openmano instance-scenario-delete -f complex2-instance   || echo "fail"
     ${DIRmano}/openmano instance-scenario-delete -f complex3-instance   || echo "fail"
     ${DIRmano}/openmano instance-scenario-delete -f complex4-instance   || echo "fail"
     ${DIRmano}/openmano instance-scenario-delete -f complex5-instance   || echo "fail"
     ${DIRmano}/openmano scenario-delete -f simple           || echo "fail"
     ${DIRmano}/openmano scenario-delete -f complex          || echo "fail"
     ${DIRmano}/openmano scenario-delete -f complex2         || echo "fail"
     ${DIRmano}/openmano scenario-delete -f complex3         || echo "fail"
     ${DIRmano}/openmano scenario-delete -f complex4         || echo "fail"
     ${DIRmano}/openmano scenario-delete -f complex5         || echo "fail"
     ${DIRmano}/openmano vnf-delete -f linux                 || echo "fail"
     ${DIRmano}/openmano vnf-delete -f linux_2VMs_v02        || echo "fail"
     ${DIRmano}/openmano vnf-delete -f dataplaneVNF_2VMs     || echo "fail"
     ${DIRmano}/openmano vnf-delete -f dataplaneVNF_2VMs_v02 || echo "fail"
     ${DIRmano}/openmano vnf-delete -f dataplaneVNF4 || echo "fail"
     ${DIRmano}/openmano vnf-delete -f dataplaneVNF2         || echo "fail"
     ${DIRmano}/openmano vnf-delete -f dataplaneVNF3         || echo "fail"
     ${DIRmano}/openmano datacenter-detach TEST-dc           || echo "fail"
     ${DIRmano}/openmano datacenter-delete -f TEST-dc        || echo "fail"
     ${DIRmano}/openmano tenant-delete -f TEST-tenant        || echo "fail"
     echo

 elif [[ $action == "create" ]]
 then
     printf "%-50s" "Creating openmano tenant 'TEST-tenant': "
     result=`${DIRmano}/openmano tenant-create TEST-tenant --description="created by basictest.sh"`
     nfvotenant=`echo $result |gawk '{print $1}'`
     #check a valid uuid is obtained
     ! is_valid_uuid $nfvotenant && echo "FAIL" && echo "    $result" && $_exit 1
     export OPENMANO_TENANT=$nfvotenant
     [[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_TENANT=$nfvotenant"  >> ~/.bashrc
     echo $nfvotenant

     printf "%-50s" "Creating datacenter 'TEST-dc' in openmano:"
     [[ -z $OPENVIM_HOST ]] && OPENVIM_HOST=localhost
     [[ -z $OPENVIM_PORT ]] && OPENVIM_PORT=9080
     URL_ADMIN_PARAM=""
     [[ -n $OPENVIM_ADMIN_PORT ]] && URL_ADMIN_PARAM=" --url_admin=http://${OPENVIM_HOST}:${OPENVIM_ADMIN_PORT}/openvim"
     result=`${DIRmano}/openmano datacenter-create TEST-dc "http://${OPENVIM_HOST}:${OPENVIM_PORT}/openvim" --type=openvim${URL_ADMIN_PARAM} --config="{test: no use just for test}"`
     datacenter=`echo $result |gawk '{print $1}'`
     #check a valid uuid is obtained
     ! is_valid_uuid $datacenter && echo "FAIL" && echo "    $result" && $_exit 1
     echo $datacenter
     export OPENMANO_DATACENTER=$datacenter
     [[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_DATACENTER=$datacenter"  >> ~/.bashrc

     printf "%-50s" "Attaching openmano tenant to the datacenter:"
     result=`${DIRmano}/openmano datacenter-attach TEST-dc --config="{test: no use just for test}"`
     [[ $? != 0 ]] && echo  "FAIL" && echo "    $result" && $_exit 1
     echo OK

     printf "%-50s" "Updating external nets in openmano: "
     result=`${DIRmano}/openmano datacenter-netmap-delete -f --all`
     [[ $? != 0 ]] && echo  "FAIL" && echo "    $result"  && $_exit 1
     result=`${DIRmano}/openmano datacenter-netmap-import -f`
     [[ $? != 0 ]] && echo  "FAIL" && echo "    $result"  && $_exit 1
     echo OK

     for VNF in linux dataplaneVNF1 dataplaneVNF2 dataplaneVNF_2VMs dataplaneVNF_2VMs_v02 dataplaneVNF3 linux_2VMs_v02 dataplaneVNF4
     do
         printf "%-50s" "Creating VNF '${VNF}': "
         result=`$DIRmano/openmano vnf-create $DIRmano/vnfs/examples/${VNF}.yaml`
         vnf=`echo $result |gawk '{print $1}'`
         #check a valid uuid is obtained
         ! is_valid_uuid $vnf && echo FAIL && echo "    $result" &&  $_exit 1
         echo $vnf
     done
     for NS in simple complex complex2 complex3 complex4 complex5
     do
         printf "%-50s" "Creating scenario '${NS}':"
         result=`$DIRmano/openmano scenario-create $DIRmano/scenarios/examples/${NS}.yaml`
         scenario=`echo $result |gawk '{print $1}'`
         ! is_valid_uuid $scenario && echo FAIL && echo "    $result" &&  $_exit 1
         echo $scenario
     done

     for IS in simple complex complex2 complex3 complex5
     do
         printf "%-50s" "Creating instance-scenario '${IS}':"
         result=`$DIRmano/openmano instance-scenario-create  --scenario ${IS} --name ${IS}-instance`
         instance=`echo $result |gawk '{print $1}'`
         ! is_valid_uuid $instance && echo FAIL && echo "    $result" &&  $_exit 1
         echo $instance
     done

     printf "%-50s" "Creating instance-scenario 'complex4':"
     result=`$DIRmano/openmano instance-scenario-create $DIRmano/instance-scenarios/examples/instance-creation-complex4.yaml`
     instance=`echo $result |gawk '{print $1}'`
     ! is_valid_uuid $instance && echo FAIL && echo "    $result" &&  $_exit 1
     echo $instance

     echo
     #echo "Check virtual machines are deployed"
     #vms_error=`openvim vm-list | grep ERROR | wc -l`
     #vms=`openvim vm-list | wc -l`
     #[[ $vms -ne 8 ]]       &&  echo "WARNING: $vms VMs created, must be 8 VMs" >&2 && $_exit 1
     #[[ $vms_error -gt 0 ]] &&  echo "WARNING: $vms_error VMs with ERROR" >&2       && $_exit 1
 fi
 done

 echo
 echo DONE
	#!/bin/bash

	##
	# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
	# This file is part of openmano
	# All Rights Reserved.
	#
	# Licensed under the Apache License, Version 2.0 (the "License"); you may
	# not use this file except in compliance with the License. You may obtain
	# a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
	# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
	# License for the specific language governing permissions and limitations
	# under the License.
	#
	# For those usages not covered by the Apache License, Version 2.0 please
	# contact with: nfvlabs@tid.es
	##

	#This script can be used as a basic test of openmano.
	#WARNING: It destroy the database content


	function usage(){
	echo -e "usage: ${BASH_SOURCE[0]} [OPTIONS] <action>\n test openmano using openvim as a VIM"
	echo -e " the OPENVIM_HOST, OPENVIM_PORT shell variables indicate openvim location"
	echo -e " by default localhost:9080"
	echo -e " <action> is a list of the following items (by default 'reset create delete')"
	echo -e " reset reset the openmano database content"
	echo -e " create creates items"
	echo -e " delete delete created items"
	echo -e " OPTIONS:"
	echo -e " -f --force does not prompt for confirmation"
	echo -e " -h --help shows this help"
	echo -e " --screen forces to run openmano (and openvim) service in a screen"
	echo -e " --insert-bashrc insert the created tenant,datacenter variables at"
	echo -e " ~/.bashrc to be available by openmano CLI"
	echo -e " --install-openvim install openvim in test mode"
	echo -e " --init-openvim if openvim runs locally, an init is called to clean openvim"
	echo -e " database and add fake hosts"
	}

	function is_valid_uuid(){
	echo "$1" \| grep -q -E '^[0-9a-f]{8}-([0-9a-f]{4}-){3}[0-9a-f]{12}$' && return 0
	return 1
	}

	#detect if is called with a source to use the 'exit'/'return' command for exiting
	DIRNAME=$(dirname $(readlink -f ${BASH_SOURCE[0]}))
	DIRmano=$(dirname $DIRNAME)
	DIRscript=${DIRmano}/scripts

	[[ ${BASH_SOURCE[0]} != $0 ]] && _exit="return" \|\| _exit="exit"


	#process options
	source ${DIRscript}/get-options.sh "force:f help:h insert-bashrc init-openvim install-openvim screen" $* \|\| $_exit 1

	#help
	[ -n "$option_help" ] && usage && $_exit 0

	#check correct arguments
	force_param="" && [[ -n "$option_force" ]] && force_param=" -f"
	insert_bashrc_param="" && [[ -n "$option_insert_bashrc" ]] && insert_bashrc_param=" --insert-bashrc"
	screen_mano_param="" && [[ -n "$option_screen" ]] && screen_mano_param=" --screen-name=mano"
	screen_vim_param="" && [[ -n "$option_screen" ]] && screen_vim_param=" --screen-name=vim"

	action_list=""

	for argument in $params
	do
	if [[ $argument == reset ]] \|\| [[ $argument == create ]] \|\| [[ $argument == delete ]] \|\| [[ -z "$argument" ]]
	then
	action_list="$action_list $argument"
	continue
	fi
	echo "invalid argument '$argument'? Type -h for help" >&2 && $_exit 1
	done

	export OPENMANO_HOST=localhost
	export OPENMANO_PORT=9090
	[[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_HOST=localhost" >> ~/.bashrc
	[[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_PORT=9090" >> ~/.bashrc


	#by default action should be reset and create
	[[ -z $action_list ]] && action_list="reset create delete"

	if [[ -n "$option_install_openvim" ]]
	then
	mkdir -p ${DIRNAME}/local
	pushd ${DIRNAME}/local
	echo "installing openvim at ${DIRNAME}/openvim ... "
	wget -O install-openvim.sh "https://osm.etsi.org/gitweb/?p=osm/openvim.git;a=blob_plain;f=scripts/install-openvim.sh"
	chmod +x install-openvim.sh
	sudo ./install-openvim.sh --no-install-packages --force --quiet --develop
	export alias initopenvim="${PWD}/openvim/scripts/initopenvim.sh"
	export alias openvim="${PWD}/openvim/scripts/openvim"
	option_init_openvim=""
	${DIRNAME}/local/openvim/scripts/initopenvim.sh${force_param}${insert_bashrc_param}${screen_vim_param} \|\| echo "WARNING openvim cannot be initialized. The rest of test can fail!"

	popd
	fi
	[[ -z "$option_init_openvim" ]] \|\| initopenvim${force_param}${insert_bashrc_param}${screen_vim_param} \|\| echo "WARNING openvim cannot be initialized. The rest of test can fail!"

	#check openvim client variables are set
	#fail=""
	#[[ -z $OPENVIM_HOST ]] && echo "OPENVIM_HOST variable not defined" >&2 && fail=1
	#[[ -z $OPENVIM_PORT ]] && echo "OPENVIM_PORT variable not defined" >&2 && fail=1
	#[[ -n $fail ]] && $_exit 1


	for action in $action_list
	do
	#if [[ $action == "install-openvim" ]]
	#echo "Installing and starting openvim"
	#mkdir -p temp
	#pushd temp
	#wget https://github.com/nfvlabs/openvim/raw/v0.4/scripts/install-openvim.sh
	#chmod -x install-openvim.sh
	#fi

	if [[ $action == "reset" ]]
	then

	#ask for confirmation if argument is not -f --force
	force_=y
	[[ -z "$option_force" ]] && read -e -p "WARNING: reset openmano database, content will be lost!!! Continue(y/N) " force_
	[[ $force_ != y ]] && [[ $force_ != yes ]] && echo "aborted!" && $_exit

	echo "Stopping openmano"
	$DIRscript/service-openmano.sh mano stop${screen_mano_param}
	echo "Initializing openmano database"
	$DIRmano/database_utils/init_mano_db.sh -u mano -p manopw --createdb
	echo "Starting openmano"
	$DIRscript/service-openmano.sh mano start${screen_mano_param}
	echo

	elif [[ $action == "delete" ]]
	then
	result=`openmano tenant-list TEST-tenant`
	nfvotenant=`echo $result \|gawk '{print $1}'`
	#check a valid uuid is obtained
	is_valid_uuid $nfvotenant \|\| ! echo "Tenant TEST-tenant not found. Already delete?" >&2 \|\| $_exit 1
	export OPENMANO_TENANT=$nfvotenant
	${DIRmano}/openmano instance-scenario-delete -f simple-instance \|\| echo "fail"
	${DIRmano}/openmano instance-scenario-delete -f complex-instance \|\| echo "fail"
	${DIRmano}/openmano instance-scenario-delete -f complex2-instance \|\| echo "fail"
	${DIRmano}/openmano instance-scenario-delete -f complex3-instance \|\| echo "fail"
	${DIRmano}/openmano instance-scenario-delete -f complex4-instance \|\| echo "fail"
	${DIRmano}/openmano instance-scenario-delete -f complex5-instance \|\| echo "fail"
	${DIRmano}/openmano scenario-delete -f simple \|\| echo "fail"
	${DIRmano}/openmano scenario-delete -f complex \|\| echo "fail"
	${DIRmano}/openmano scenario-delete -f complex2 \|\| echo "fail"
	${DIRmano}/openmano scenario-delete -f complex3 \|\| echo "fail"
	${DIRmano}/openmano scenario-delete -f complex4 \|\| echo "fail"
	${DIRmano}/openmano scenario-delete -f complex5 \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f linux \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f linux_2VMs_v02 \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f dataplaneVNF_2VMs \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f dataplaneVNF_2VMs_v02 \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f dataplaneVNF4 \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f dataplaneVNF2 \|\| echo "fail"
	${DIRmano}/openmano vnf-delete -f dataplaneVNF3 \|\| echo "fail"
	${DIRmano}/openmano datacenter-detach TEST-dc \|\| echo "fail"
	${DIRmano}/openmano datacenter-delete -f TEST-dc \|\| echo "fail"
	${DIRmano}/openmano tenant-delete -f TEST-tenant \|\| echo "fail"
	echo

	elif [[ $action == "create" ]]
	then
	printf "%-50s" "Creating openmano tenant 'TEST-tenant': "
	result=`${DIRmano}/openmano tenant-create TEST-tenant --description="created by basictest.sh"`
	nfvotenant=`echo $result \|gawk '{print $1}'`
	#check a valid uuid is obtained
	! is_valid_uuid $nfvotenant && echo "FAIL" && echo " $result" && $_exit 1
	export OPENMANO_TENANT=$nfvotenant
	[[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_TENANT=$nfvotenant" >> ~/.bashrc
	echo $nfvotenant

	printf "%-50s" "Creating datacenter 'TEST-dc' in openmano:"
	[[ -z $OPENVIM_HOST ]] && OPENVIM_HOST=localhost
	[[ -z $OPENVIM_PORT ]] && OPENVIM_PORT=9080
	URL_ADMIN_PARAM=""
	[[ -n $OPENVIM_ADMIN_PORT ]] && URL_ADMIN_PARAM=" --url_admin=http://${OPENVIM_HOST}:${OPENVIM_ADMIN_PORT}/openvim"
	result=`${DIRmano}/openmano datacenter-create TEST-dc "http://${OPENVIM_HOST}:${OPENVIM_PORT}/openvim" --type=openvim${URL_ADMIN_PARAM} --config="{test: no use just for test}"`
	datacenter=`echo $result \|gawk '{print $1}'`
	#check a valid uuid is obtained
	! is_valid_uuid $datacenter && echo "FAIL" && echo " $result" && $_exit 1
	echo $datacenter
	export OPENMANO_DATACENTER=$datacenter
	[[ -n "$option_insert_bashrc" ]] && echo -e "\nexport OPENMANO_DATACENTER=$datacenter" >> ~/.bashrc

	printf "%-50s" "Attaching openmano tenant to the datacenter:"
	result=`${DIRmano}/openmano datacenter-attach TEST-dc --config="{test: no use just for test}"`
	[[ $? != 0 ]] && echo "FAIL" && echo " $result" && $_exit 1
	echo OK

	printf "%-50s" "Updating external nets in openmano: "
	result=`${DIRmano}/openmano datacenter-netmap-delete -f --all`
	[[ $? != 0 ]] && echo "FAIL" && echo " $result" && $_exit 1
	result=`${DIRmano}/openmano datacenter-netmap-import -f`
	[[ $? != 0 ]] && echo "FAIL" && echo " $result" && $_exit 1
	echo OK

	for VNF in linux dataplaneVNF1 dataplaneVNF2 dataplaneVNF_2VMs dataplaneVNF_2VMs_v02 dataplaneVNF3 linux_2VMs_v02 dataplaneVNF4
	do
	printf "%-50s" "Creating VNF '${VNF}': "
	result=`$DIRmano/openmano vnf-create $DIRmano/vnfs/examples/${VNF}.yaml`
	vnf=`echo $result \|gawk '{print $1}'`
	#check a valid uuid is obtained
	! is_valid_uuid $vnf && echo FAIL && echo " $result" && $_exit 1
	echo $vnf
	done
	for NS in simple complex complex2 complex3 complex4 complex5
	do
	printf "%-50s" "Creating scenario '${NS}':"
	result=`$DIRmano/openmano scenario-create $DIRmano/scenarios/examples/${NS}.yaml`
	scenario=`echo $result \|gawk '{print $1}'`
	! is_valid_uuid $scenario && echo FAIL && echo " $result" && $_exit 1
	echo $scenario
	done

	for IS in simple complex complex2 complex3 complex5
	do
	printf "%-50s" "Creating instance-scenario '${IS}':"
	result=`$DIRmano/openmano instance-scenario-create --scenario ${IS} --name ${IS}-instance`
	instance=`echo $result \|gawk '{print $1}'`
	! is_valid_uuid $instance && echo FAIL && echo " $result" && $_exit 1
	echo $instance
	done

	printf "%-50s" "Creating instance-scenario 'complex4':"
	result=`$DIRmano/openmano instance-scenario-create $DIRmano/instance-scenarios/examples/instance-creation-complex4.yaml`
	instance=`echo $result \|gawk '{print $1}'`
	! is_valid_uuid $instance && echo FAIL && echo " $result" && $_exit 1
	echo $instance

	echo
	#echo "Check virtual machines are deployed"
	#vms_error=`openvim vm-list \| grep ERROR \| wc -l`
	#vms=`openvim vm-list \| wc -l`
	#[[ $vms -ne 8 ]] && echo "WARNING: $vms VMs created, must be 8 VMs" >&2 && $_exit 1
	#[[ $vms_error -gt 0 ]] && echo "WARNING: $vms_error VMs with ERROR" >&2 && $_exit 1
	fi
	done

	echo
	echo DONE