LOG = logging.getLogger("dcemulator.net")
LOG.setLevel(logging.DEBUG)
+# default CPU period used for cpu percentage-based cfs values (microseconds)
+CPU_PERIOD = 1000000
+
class DCNetwork(Containernet):
"""
Wraps the original Mininet/Containernet class and provides
"""
def __init__(self, controller=RemoteController, monitor=False,
- enable_learning=False, # learning switch behavior of the default ovs switches icw Ryu controller can be turned off/on, neede for E-LAN functionality
+ enable_learning=False, # learning switch behavior of the default ovs switches icw Ryu controller can be turned off/on, needed for E-LAN functionality
dc_emulation_max_cpu=1.0, # fraction of overall CPU time for emulation
dc_emulation_max_mem=512, # emulation max mem in MB
**kwargs):
# initialize resource model registrar
self.rm_registrar = ResourceModelRegistrar(
dc_emulation_max_cpu, dc_emulation_max_mem)
+ self.cpu_period = CPU_PERIOD
def addDatacenter(self, label, metadata={}, resource_log_path=None):
"""
def _addMonitorFlow(self, vnf_src_name, vnf_dst_name, vnf_src_interface=None, vnf_dst_interface=None,
tag=None, **kwargs):
+ """
+ Add a monitoring flow entry that adds a special flowentry/counter at the begin or end of a chain.
+ So this monitoring flowrule exists on top of a previously defined chain rule and uses the same vlan tag/routing.
+ :param vnf_src_name:
+ :param vnf_dst_name:
+ :param vnf_src_interface:
+ :param vnf_dst_interface:
+ :param tag: vlan tag to be used for this chain (same tag as existing chain)
+ :param monitor_placement: 'tx' or 'rx' indicating to place the extra flowentry resp. at the beginning or end of the chain
+ :return:
+ """
src_sw = None
src_sw_inport_nr = 0
kwargs['switch_outport_name'] = dst_sw_outport_name
kwargs['skip_vlan_tag'] = True
- monitor_placement = kwargs.get('monitor_placement')
+ monitor_placement = kwargs.get('monitor_placement').strip()
# put monitor flow at the dst switch
insert_flow = False
if monitor_placement == 'tx' and path.index(current_hop) == 0: # first node:
# put monitoring flow at the src switch
elif monitor_placement == 'rx' and path.index(current_hop) == len(path) - 1: # last node:
insert_flow = True
- else:
+ elif monitor_placement not in ['rx', 'tx']:
LOG.exception('invalid monitor command: {0}'.format(monitor_placement))
:param cookie: cookie for the installed flowrules (can be used later as identifier for a set of installed chains)
:param match: custom match entry to be added to the flowrules (default: only in_port and vlan tag)
:param priority: custom flowrule priority
+<<<<<<< HEAD
+ :param monitor: boolean to indicate whether this chain is a monitoring chain
+ :param tag: vlan tag to be used for this chain (pre-defined or new one if none is specified)
+=======
+ :param path: custom path between the two VNFs (list of switches)
+>>>>>>> upstream/master
:return: output log string
"""
return ret
else:
# no chain existing (or E-LAN) -> install normal chain
- LOG.warning('*** installing monitoring chain without pre-defined chain from {0}:{1} -> {2}:{3}'.
+ LOG.warning('*** installing monitoring chain without pre-defined NSD chain from {0}:{1} -> {2}:{3}'.
format(vnf_src_name, vnf_src_interface, vnf_dst_name, vnf_dst_interface))
pass
if cmd == 'add-flow' or cmd == 'del-flows':
ret = self._chainAddFlow(vnf_src_name, vnf_dst_name, vnf_src_interface, vnf_dst_interface, **kwargs)
if kwargs.get('bidirectional'):
+ if kwargs.get('path') is not None:
+ kwargs['path'] = list(reversed(kwargs.get('path')))
ret = ret +'\n' + self._chainAddFlow(vnf_dst_name, vnf_src_name, vnf_dst_interface, vnf_src_interface, **kwargs)
else:
dst_sw_outport_name = link_dict[link]['src_port_name']
break
-
- # get shortest path
- try:
- # returns the first found shortest path
- # if all shortest paths are wanted, use: all_shortest_paths
- path = nx.shortest_path(self.DCNetwork_graph, src_sw, dst_sw, weight=kwargs.get('weight'))
- except:
- LOG.exception("No path could be found between {0} and {1} using src_sw={2} and dst_sw={3}".format(
- vnf_src_name, vnf_dst_name, src_sw, dst_sw))
- LOG.debug("Graph nodes: %r" % self.DCNetwork_graph.nodes())
- LOG.debug("Graph edges: %r" % self.DCNetwork_graph.edges())
- for e, v in self.DCNetwork_graph.edges():
- LOG.debug("%r" % self.DCNetwork_graph[e][v])
- return "No path could be found between {0} and {1}".format(vnf_src_name, vnf_dst_name)
+ path = kwargs.get('path')
+ if path is None:
+ # get shortest path
+ try:
+ # returns the first found shortest path
+ # if all shortest paths are wanted, use: all_shortest_paths
+ path = nx.shortest_path(self.DCNetwork_graph, src_sw, dst_sw, weight=kwargs.get('weight'))
+ except:
+ LOG.exception("No path could be found between {0} and {1} using src_sw={2} and dst_sw={3}".format(
+ vnf_src_name, vnf_dst_name, src_sw, dst_sw))
+ LOG.debug("Graph nodes: %r" % self.DCNetwork_graph.nodes())
+ LOG.debug("Graph edges: %r" % self.DCNetwork_graph.edges())
+ for e, v in self.DCNetwork_graph.edges():
+ LOG.debug("%r" % self.DCNetwork_graph[e][v])
+ return "No path could be found between {0} and {1}".format(vnf_src_name, vnf_dst_name)
LOG.info("Path between {0} and {1}: {2}".format(vnf_src_name, vnf_dst_name, path))
for i in range(0,len(path)):
current_node = self.getNodeByName(current_hop)
- if path.index(current_hop) < len(path)-1:
- next_hop = path[path.index(current_hop)+1]
+ if i < len(path) - 1:
+ next_hop = path[i + 1]
else:
- #last switch reached
+ # last switch reached
next_hop = vnf_dst_name
next_node = self.getNodeByName(next_hop)
kwargs['current_hop'] = current_hop
kwargs['switch_inport_name'] = src_sw_inport_name
kwargs['switch_outport_name'] = dst_sw_outport_name
+ kwargs['pathindex'] = i
if self.controller == RemoteController:
## set flow entry via ryu rest api
match_input = kwargs.get('match')
cmd = kwargs.get('cmd')
path = kwargs.get('path')
- current_hop = kwargs.get('current_hop')
+ index = kwargs.get('pathindex')
+
vlan = kwargs.get('vlan')
priority = kwargs.get('priority')
# flag to not set the ovs port vlan tag
if cmd == 'add-flow':
prefix = 'stats/flowentry/add'
if vlan != None:
- if path.index(current_hop) == 0: # first node
+ if index == 0: # first node
# set vlan tag in ovs instance (to isolate E-LANs)
if not skip_vlan_tag:
in_port_name = kwargs.get('switch_inport_name')
action = {}
action['type'] = 'SET_FIELD'
action['field'] = 'vlan_vid'
- action['value'] = vlan
+ # ryu expects the field to be masked
+ action['value'] = vlan | 0x1000
flow['actions'].append(action)
- if path.index(current_hop) == len(path) - 1: # last node
+ elif index == len(path) - 1: # last node
# set vlan tag in ovs instance (to isolate E-LANs)
if not skip_vlan_tag:
out_port_name = kwargs.get('switch_outport_name')
action['type'] = 'POP_VLAN'
flow['actions'].append(action)
- if 0 < path.index(current_hop) < (len(path) - 1): # middle nodes
+ else: # middle nodes
match += ',dl_vlan=%s' % vlan
# output action must come last
match_input = kwargs.get('match')
cmd = kwargs.get('cmd')
path = kwargs.get('path')
- current_hop = kwargs.get('current_hop')
+ index = kwargs.get('pathindex')
vlan = kwargs.get('vlan')
s = ','
if cmd == 'add-flow':
action = 'action=%s' % switch_outport_nr
if vlan != None:
- if path.index(current_hop) == 0: # first node
+ if index == 0: # first node
action = ('action=mod_vlan_vid:%s' % vlan) + (',output=%s' % switch_outport_nr)
match = '-O OpenFlow13 ' + match
- elif path.index(current_hop) == len(path) - 1: # last node
+ elif index == len(path) - 1: # last node
match += ',dl_vlan=%s' % vlan
action = 'action=strip_vlan,output=%s' % switch_outport_nr
else: # middle nodes
dict.update({match[0]:m2})
return dict
+ def find_connected_dc_interface(self, vnf_src_name, vnf_src_interface):
+ for connected_sw in self.DCNetwork_graph.neighbors(vnf_src_name):
+ link_dict = self.DCNetwork_graph[vnf_src_name][connected_sw]
+ for link in link_dict:
+ if (link_dict[link]['src_port_id'] == vnf_src_interface or
+ link_dict[link]['src_port_name'] == vnf_src_interface): # Fix: we might also get interface names, e.g, from a son-emu-cli call
+ # found the right link and connected switch
+ src_sw = connected_sw
+ src_sw_inport_nr = link_dict[link]['dst_port_nr']
+ src_sw_inport_name = link_dict[link]['dst_port_name']
+ return src_sw_inport_name
projects / osm / vim-emu.git / blobdiff