function usage(){
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo -e "usage: $0 [OPTIONS]"
- echo -e "Install OSM from binaries or source code (by default, from binaries)"
+ echo -e "Install OSM"
echo -e " OPTIONS"
echo -e " -h / --help: print this help"
echo -e " -y: do not prompt for confirmation, assumes yes"
echo -e " -b tags/v1.1.0 (a specific tag)"
echo -e " ..."
echo -e " -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
- echo -e " -s <stack name> or <namespace> user defined stack name when installed using swarm or namespace when installed using k8s, default is osm"
+ echo -e " -c <kubernetes engine>: use a specific kubernetes engine (options: kubeadm, k3s, microk8s), default is kubeadm"
+ echo -e " -s <namespace> namespace when installed using k8s, default is osm"
echo -e " -H <VCA host> use specific juju host controller IP"
echo -e " -S <VCA secret> use VCA/juju secret key"
echo -e " -P <VCA pubkey> use VCA/juju public key file"
- echo -e " -C <VCA cacert> use VCA/juju CA certificate file"
echo -e " -A <VCA apiproxy> use VCA/juju API proxy"
echo -e " --pla: install the PLA module for placement support"
+ echo -e " --old-sa: install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
+ echo -e " --ng-sa: install new Service Assurance framework (Airflow, AlertManager and Pushgateway) (enabled by default)"
echo -e " -m <MODULE>: install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
- echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor)"
+ echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
echo -e " -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
echo -e " -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
echo -e " -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano"
echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana"
echo -e " --volume: create a VM volume when installing to OpenStack"
-# echo -e " --reconfigure: reconfigure the modules (DO NOT change NAT rules)"
-# echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
echo -e " --showopts: print chosen options and exit (only for debugging)"
echo -e " --charmed: Deploy and operate OSM with Charms on k8s"
echo -e " [--bundle <bundle path>]: Specify with which bundle to deploy OSM with charms (--charmed option)"
echo -e " [--k8s <kubeconfig path>]: Specify with which kubernetes to deploy OSM with charms (--charmed option)"
echo -e " [--vca <name>]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
+ echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
echo -e " [--lxd <yaml path>]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
echo -e " [--lxd-cred <yaml path>]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)"
OSM_VCA_CLOUDNAME="lxd-cloud"
[ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
if [ -z "$OSM_VCA_HOST" ]; then
- [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_STACK_NAME"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
+ [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
[ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
[ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
fi
if [ -z "$OSM_VCA_SECRET" ]; then
- [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_STACK_NAME)
+ [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
[ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
[ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
fi
[ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
fi
if [ -z "$OSM_VCA_CACERT" ]; then
- [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_STACK_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
+ [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
[ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
[ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
fi
NEEDED_PACKAGES="$1"
echo -e "Checking required packages: ${NEEDED_PACKAGES}"
for PACKAGE in ${NEEDED_PACKAGES} ; do
- dpkg -L ${PACKAGE} &>/dev/null
+ dpkg -L ${PACKAGE}
if [ $? -ne 0 ]; then
- echo -e "Package ${PACKAGE} is not installed. Updating apt"
+ echo -e "Package ${PACKAGE} is not installed."
+ echo -e "Updating apt-cache ..."
sudo apt-get update
+ echo -e "Installing ${PACKAGE} ..."
sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
fi
done
echo -e "Required packages are present: ${NEEDED_PACKAGES}"
}
-function install_lxd() {
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- # Apply sysctl production values for optimal performance
- sudo cp ${OSM_DEVOPS}/installers/60-lxd-production.conf /etc/sysctl.d/60-lxd-production.conf
- sudo sysctl --system
-
- # Install LXD snap
- sudo apt-get remove --purge -y liblxc1 lxc-common lxcfs lxd lxd-client
- sudo snap install lxd --channel $LXD_VERSION/stable
-
- # Configure LXD
- sudo usermod -a -G lxd `whoami`
- cat ${OSM_DEVOPS}/installers/lxd-preseed.conf | sed 's/^config: {}/config:\n core.https_address: '$DEFAULT_IP':8443/' | sg lxd -c "lxd init --preseed"
- sg lxd -c "lxd waitready"
- DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
- [ -z "$DEFAULT_IF" ] && DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
- [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
- DEFAULT_MTU=$(ip addr show ${DEFAULT_IF} | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
- sg lxd -c "lxc profile device set default eth0 mtu $DEFAULT_MTU"
- sg lxd -c "lxc network set lxdbr0 bridge.mtu $DEFAULT_MTU"
- #sudo systemctl stop lxd-bridge
- #sudo systemctl --system daemon-reload
- #sudo systemctl enable lxd-bridge
- #sudo systemctl start lxd-bridge
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
function ask_user(){
# ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
# Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
- sudo apt-get update
- sudo apt-get install -y python3-pip
+ sudo apt-get -y update
+ sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip
sudo -H LC_ALL=C python3 -m pip install -U pip
- sudo -H LC_ALL=C python3 -m pip install -U python-magic pyangbind verboselogs
- sudo apt-get install -y python3-osm-im python3-osmclient
+ sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient
if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
fi
if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
- sudo apt-get install -y libcurl4-openssl-dev libssl-dev
+ sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libmagic1
python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
fi
[ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
function generate_docker_images() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- echo "Pulling and generating docker images"
- [ -n "${DOCKER_REGISTRY_URL}" ] && docker_login
-
- echo "Pulling docker images"
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q KAFKA ; then
- sg docker -c "docker pull wurstmeister/zookeeper" || FATAL "cannot get zookeeper docker image"
- sg docker -c "docker pull wurstmeister/kafka:${KAFKA_TAG}" || FATAL "cannot get kafka docker image"
- fi
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q MONGO ; then
- sg docker -c "docker pull mongo" || FATAL "cannot get mongo docker image"
- fi
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS ; then
- sg docker -c "docker pull prom/prometheus:${PROMETHEUS_TAG}" || FATAL "cannot get prometheus docker image"
- fi
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS-CADVISOR ; then
- sg docker -c "docker pull google/cadvisor:${PROMETHEUS_CADVISOR_TAG}" || FATAL "cannot get prometheus cadvisor docker image"
- fi
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q GRAFANA ; then
- sg docker -c "docker pull grafana/grafana:${GRAFANA_TAG}" || FATAL "cannot get grafana docker image"
- fi
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q NBI || echo $TO_REBUILD | grep -q KEYSTONE-DB ; then
- sg docker -c "docker pull mariadb:${KEYSTONEDB_TAG}" || FATAL "cannot get keystone-db docker image"
- fi
-
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q RO ; then
- sg docker -c "docker pull mysql:5" || FATAL "cannot get mysql docker image"
- fi
-
- if [ -n "$PULL_IMAGES" ]; then
- echo "Pulling OSM docker images"
- for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA osmclient; do
+ echo "Generating docker images"
+ _build_from=$COMMIT_ID
+ [ -z "$_build_from" ] && _build_from="latest"
+ echo "OSM Docker images generated from $_build_from"
+ LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
+ trap 'rm -rf "${LWTEMPDIR}"' EXIT
+ for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do
+ if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then
module_lower=${module,,}
if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
continue
fi
- module_tag="${OSM_DOCKER_TAG}"
- if [ -n "${MODULE_DOCKER_TAG}" ] && echo $TO_REBUILD | grep -q $module ; then
- module_tag="${MODULE_DOCKER_TAG}"
- fi
- echo "Pulling ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag} docker image"
- sg docker -c "docker pull ${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module_lower}:${module_tag}" || FATAL "cannot pull $module docker image"
- done
- else
- _build_from=$COMMIT_ID
- [ -z "$_build_from" ] && _build_from="latest"
- echo "OSM Docker images generated from $_build_from"
- LWTEMPDIR="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX")"
- trap 'rm -rf "${LWTEMPDIR}"' EXIT
- for module in MON POL NBI KEYSTONE RO LCM NG-UI PLA; do
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q ${module} ; then
- module_lower=${module,,}
- if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
- continue
- fi
- git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module
- git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
- sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
- fi
- done
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then
- BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY")
- BUILD_ARGS+=(--build-arg RELEASE="$RELEASE")
- BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY")
- BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE")
- sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
+ git -C ${LWTEMPDIR} clone https://osm.etsi.org/gerrit/osm/$module
+ git -C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
+ sg docker -c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
fi
- echo "Finished generation of docker images"
- fi
-
- echo "Finished pulling and generating docker images"
+ done
+ if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q osmclient; then
+ BUILD_ARGS+=(--build-arg REPOSITORY="$REPOSITORY")
+ BUILD_ARGS+=(--build-arg RELEASE="$RELEASE")
+ BUILD_ARGS+=(--build-arg REPOSITORY_KEY="$REPOSITORY_KEY")
+ BUILD_ARGS+=(--build-arg REPOSITORY_BASE="$REPOSITORY_BASE")
+ sg docker -c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
+ fi
+ echo "Finished generation of docker images"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-function generate_k8s_manifest_files() {
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- #Kubernetes resources
- sudo cp -bR ${OSM_DEVOPS}/installers/docker/osm_pods $OSM_DOCKER_WORK_DIR
- sudo rm -f $OSM_K8S_WORK_DIR/mongo.yaml
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-function generate_prometheus_grafana_files() {
- #this only works with docker swarm
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- # Prometheus files
- sudo mkdir -p $OSM_DOCKER_WORK_DIR/prometheus
- sudo cp -b ${OSM_DEVOPS}/installers/docker/prometheus/prometheus.yml $OSM_DOCKER_WORK_DIR/prometheus/prometheus.yml
-
- # Grafana files
- sudo mkdir -p $OSM_DOCKER_WORK_DIR/grafana
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/dashboards-osm.yml $OSM_DOCKER_WORK_DIR/grafana/dashboards-osm.yml
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/datasource-prometheus.yml $OSM_DOCKER_WORK_DIR/grafana/datasource-prometheus.yml
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/osm-sample-dashboard.json $OSM_DOCKER_WORK_DIR/grafana/osm-sample-dashboard.json
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/osm-system-dashboard.json $OSM_DOCKER_WORK_DIR/grafana/osm-system-dashboard.json
-
- # Prometheus Exporters files
- sudo mkdir -p $OSM_DOCKER_WORK_DIR/prometheus_exporters
- sudo cp -b ${OSM_DEVOPS}/installers/docker/prometheus_exporters/node_exporter.service $OSM_DOCKER_WORK_DIR/prometheus_exporters/node_exporter.service
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-function generate_docker_env_files() {
+#deploys osm pods and services
+function deploy_osm_services() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- echo "Doing a backup of existing env files"
- sudo cp $OSM_DOCKER_WORK_DIR/keystone-db.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/keystone.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/lcm.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/mon.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/nbi.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/pol.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/ro-db.env{,~}
- sudo cp $OSM_DOCKER_WORK_DIR/ro.env{,~}
-
- echo "Generating docker env files"
- # LCM
- if [ ! -f $OSM_DOCKER_WORK_DIR/lcm.env ]; then
- echo "OSMLCM_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_HOST" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_HOST=${OSM_VCA_HOST}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_HOST.*|OSMLCM_VCA_HOST=$OSM_VCA_HOST|g" $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_SECRET" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_SECRET=${OSM_VCA_SECRET}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_SECRET.*|OSMLCM_VCA_SECRET=$OSM_VCA_SECRET|g" $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_PUBKEY" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_PUBKEY=${OSM_VCA_PUBKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_PUBKEY.*|OSMLCM_VCA_PUBKEY=${OSM_VCA_PUBKEY}|g" $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_CACERT" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_CACERT=${OSM_VCA_CACERT}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_CACERT.*|OSMLCM_VCA_CACERT=${OSM_VCA_CACERT}|g" $OSM_DOCKER_WORK_DIR/lcm.env
+ # helm is already installed as part of install_kubeadm_cluster.sh
+
+ # Generate helm values to be passed with -f osm-values.yaml
+ sudo mkdir -p ${OSM_HELM_WORK_DIR}
+ if [ -n "${INSTALL_JUJU}" ]; then
+ sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
+vca:
+ pubkey: \"${OSM_VCA_PUBKEY}\"
+EOF"
fi
- if [ -n "$OSM_VCA_APIPROXY" ]; then
- if ! grep -Fq "OSMLCM_VCA_APIPROXY" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_APIPROXY.*|OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}|g" $OSM_DOCKER_WORK_DIR/lcm.env
+ # Generate helm values to be passed with --set
+ OSM_HELM_OPTS=""
+ # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}"
+ if [ -n "${INSTALL_JUJU}" ]; then
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.enabled=true"
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
+ fi
+ [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
+ [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set-string global.image.tag=${OSM_DOCKER_TAG}"
+ [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
+ if [ -n "${OSM_BEHIND_PROXY}" ]; then
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true"
+ [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=\"${HTTP_PROXY}\""
+ [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=\"${HTTPS_PROXY}\""
+ if [ -n "${NO_PROXY}" ]; then
+ if [[ ! "${NO_PROXY}" =~ .*".svc".* ]]; then
+ NO_PROXY="${NO_PROXY},.svc"
+ fi
+ if [[ ! "${NO_PROXY}" =~ .*".cluster.local".* ]]; then
+ NO_PROXY="${NO_PROXY},.cluster.local"
+ fi
+ OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=\"${NO_PROXY//,/\,}\""
fi
fi
- if ! grep -Fq "OSMLCM_VCA_ENABLEOSUPGRADE" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "# OSMLCM_VCA_ENABLEOSUPGRADE=false" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_APTMIRROR" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "# OSMLCM_VCA_APTMIRROR=http://archive.ubuntu.com/ubuntu/" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_CLOUD" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_CLOUD=${OSM_VCA_CLOUDNAME}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_CLOUD.*|OSMLCM_VCA_CLOUD=${OSM_VCA_CLOUDNAME}|g" $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- if ! grep -Fq "OSMLCM_VCA_K8S_CLOUD" $OSM_DOCKER_WORK_DIR/lcm.env; then
- echo "OSMLCM_VCA_K8S_CLOUD=${OSM_VCA_K8S_CLOUDNAME}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
- else
- sudo sed -i "s|OSMLCM_VCA_K8S_CLOUD.*|OSMLCM_VCA_K8S_CLOUD=${OSM_VCA_K8S_CLOUDNAME}|g" $OSM_DOCKER_WORK_DIR/lcm.env
- fi
-
- # RO
- MYSQL_ROOT_PASSWORD=$(generate_secret)
- if [ ! -f $OSM_DOCKER_WORK_DIR/ro-db.env ]; then
- echo "MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/ro-db.env
- fi
- if [ ! -f $OSM_DOCKER_WORK_DIR/ro.env ]; then
- echo "RO_DB_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/ro.env
- fi
- if ! grep -Fq "OSMRO_DATABASE_COMMONKEY" $OSM_DOCKER_WORK_DIR/ro.env; then
- echo "OSMRO_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/ro.env
- fi
-
- # Keystone
- KEYSTONE_DB_PASSWORD=$(generate_secret)
- SERVICE_PASSWORD=$(generate_secret)
- if [ ! -f $OSM_DOCKER_WORK_DIR/keystone-db.env ]; then
- echo "MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/keystone-db.env
- fi
- if [ ! -f $OSM_DOCKER_WORK_DIR/keystone.env ]; then
- echo "ROOT_DB_PASSWORD=${MYSQL_ROOT_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/keystone.env
- echo "KEYSTONE_DB_PASSWORD=${KEYSTONE_DB_PASSWORD}" |sudo tee -a $OSM_DOCKER_WORK_DIR/keystone.env
- echo "SERVICE_PASSWORD=${SERVICE_PASSWORD}" |sudo tee -a $OSM_DOCKER_WORK_DIR/keystone.env
- fi
-
- # NBI
- if [ ! -f $OSM_DOCKER_WORK_DIR/nbi.env ]; then
- echo "OSMNBI_AUTHENTICATION_SERVICE_PASSWORD=${SERVICE_PASSWORD}" |sudo tee $OSM_DOCKER_WORK_DIR/nbi.env
- echo "OSMNBI_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/nbi.env
- fi
-
- # MON
- if [ ! -f $OSM_DOCKER_WORK_DIR/mon.env ]; then
- echo "OSMMON_KEYSTONE_SERVICE_PASSWORD=${SERVICE_PASSWORD}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- echo "OSMMON_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- echo "OSMMON_SQL_DATABASE_URI=mysql://root:${MYSQL_ROOT_PASSWORD}@mysql:3306/mon" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- fi
-
- if ! grep -Fq "OS_NOTIFIER_URI" $OSM_DOCKER_WORK_DIR/mon.env; then
- echo "OS_NOTIFIER_URI=http://${DEFAULT_IP}:8662" |sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- else
- sudo sed -i "s|OS_NOTIFIER_URI.*|OS_NOTIFIER_URI=http://$DEFAULT_IP:8662|g" $OSM_DOCKER_WORK_DIR/mon.env
- fi
-
- if ! grep -Fq "OSMMON_VCA_HOST" $OSM_DOCKER_WORK_DIR/mon.env; then
- echo "OSMMON_VCA_HOST=${OSM_VCA_HOST}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- else
- sudo sed -i "s|OSMMON_VCA_HOST.*|OSMMON_VCA_HOST=$OSM_VCA_HOST|g" $OSM_DOCKER_WORK_DIR/mon.env
- fi
-
- if ! grep -Fq "OSMMON_VCA_SECRET" $OSM_DOCKER_WORK_DIR/mon.env; then
- echo "OSMMON_VCA_SECRET=${OSM_VCA_SECRET}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- else
- sudo sed -i "s|OSMMON_VCA_SECRET.*|OSMMON_VCA_SECRET=$OSM_VCA_SECRET|g" $OSM_DOCKER_WORK_DIR/mon.env
- fi
-
- if ! grep -Fq "OSMMON_VCA_CACERT" $OSM_DOCKER_WORK_DIR/mon.env; then
- echo "OSMMON_VCA_CACERT=${OSM_VCA_CACERT}" | sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
- else
- sudo sed -i "s|OSMMON_VCA_CACERT.*|OSMMON_VCA_CACERT=${OSM_VCA_CACERT}|g" $OSM_DOCKER_WORK_DIR/mon.env
+ if [ -n "${INSTALL_JUJU}" ]; then
+ OSM_HELM_OPTS="-f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
fi
-
-
- # POL
- if [ ! -f $OSM_DOCKER_WORK_DIR/pol.env ]; then
- echo "OSMPOL_SQL_DATABASE_URI=mysql://root:${MYSQL_ROOT_PASSWORD}@mysql:3306/pol" | sudo tee -a $OSM_DOCKER_WORK_DIR/pol.env
- fi
-
- echo "Finished generation of docker env files"
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-#creates secrets from env files which will be used by containers
-function kube_secrets(){
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- kubectl create ns $OSM_STACK_NAME
- kubectl create secret generic lcm-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/lcm.env
- kubectl create secret generic mon-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/mon.env
- kubectl create secret generic nbi-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/nbi.env
- kubectl create secret generic ro-db-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/ro-db.env
- kubectl create secret generic ro-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/ro.env
- kubectl create secret generic keystone-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/keystone.env
- kubectl create secret generic pol-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/pol.env
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-#deploys osm pods and services
-function deploy_osm_services() {
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- kubectl apply -n $OSM_STACK_NAME -f $OSM_K8S_WORK_DIR
+ echo "helm install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}"
+ helm install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}
+ # Override existing values.yaml with the final values.yaml used to install OSM
+ helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
#deploy charmed services
function deploy_charmed_services() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- juju add-model $OSM_STACK_NAME $OSM_VCA_K8S_CLOUDNAME
- juju deploy ch:mongodb-k8s -m $OSM_STACK_NAME
+ juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
+ juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-function deploy_osm_pla_service() {
+#deploy mongodb
+function deploy_mongodb() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- # corresponding to namespace_vol
- sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_DOCKER_WORK_DIR/osm_pla/pla.yaml
- # corresponding to deploy_osm_services
- kubectl apply -n $OSM_STACK_NAME -f $OSM_DOCKER_WORK_DIR/osm_pla
+ MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
+ [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
+ $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
+ FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-function parse_yaml() {
+function install_osm_ngsa_service() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- TAG=$1
- shift
- services=$@
- for module in $services; do
- if [ "$module" == "pla" ]; then
- if [ -n "$INSTALL_PLA" ]; then
- echo "Updating K8s manifest file from opensourcemano\/${module}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${module}:${TAG}"
- sudo sed -i "s#opensourcemano/pla:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/pla:${TAG}#g" ${OSM_DOCKER_WORK_DIR}/osm_pla/pla.yaml
- fi
- else
- echo "Updating K8s manifest file from opensourcemano\/${module}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${module}:${TAG}"
- sudo sed -i "s#opensourcemano/${module}:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module}:${TAG}#g" ${OSM_K8S_WORK_DIR}/${module}.yaml
- fi
- done
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-function update_manifest_files() {
- osm_services="nbi lcm ro pol mon ng-ui keystone pla prometheus"
- list_of_services=""
- for module in $osm_services; do
- module_upper="${module^^}"
- if ! echo $TO_REBUILD | grep -q $module_upper ; then
- list_of_services="$list_of_services $module"
- fi
- done
- if [ ! "$OSM_DOCKER_TAG" == "11" ]; then
- parse_yaml $OSM_DOCKER_TAG $list_of_services
- fi
- if [ -n "$MODULE_DOCKER_TAG" ]; then
- parse_yaml $MODULE_DOCKER_TAG $list_of_services_to_rebuild
- fi
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-function namespace_vol() {
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- osm_services="nbi lcm ro pol mon kafka mysql prometheus"
- for osm in $osm_services; do
- sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_K8S_WORK_DIR/$osm.yaml
- done
+ NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
+ [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
+ $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
+ FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-function install_osm() {
+function ask_proceed() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- track checks checkingroot_ok
- [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
- track checks noroot_ok
[ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
1. Install and configure LXD
5. Install and initialize Kubernetes
as pre-requirements.
Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
+
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
+function check_osm_behind_proxy() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+
+ export OSM_BEHIND_PROXY=""
+ export OSM_PROXY_ENV_VARIABLES=""
+ [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
+ [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
+ [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
+ [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
+ [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
+ [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
+
+ echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
+ echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
+
+ if [ -n "${OSM_BEHIND_PROXY}" ]; then
+ [ -z "$ASSUME_YES" ] && ! ask_user "
+The following env variables have been found for the current user:
+${OSM_PROXY_ENV_VARIABLES}.
+
+This suggests that this machine is behind a proxy and a special configuration is required.
+The installer will install Docker CE, LXD and Juju to work behind a proxy using those
+env variables.
+
+Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
+Depending on the program, the env variables to work behind a proxy might be different
+(e.g. http_proxy vs HTTP_PROXY).
+
+For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
+and HTTPS_PROXY are defined.
+
+Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
+those env variables are also set for root user. If you are not sure whether those variables
+are configured for the root user, you can stop the installation now.
+
+Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
+ else
+ echo "This machine is not behind a proxy"
+ fi
+
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
+function find_devops_folder() {
+ if [ -z "$OSM_DEVOPS" ]; then
+ if [ -n "$TEST_INSTALLER" ]; then
+ echo -e "\nUsing local devops repo for OSM installation"
+ OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
+ else
+ echo -e "\nCreating temporary dir for OSM installation"
+ OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
+ trap 'rm -rf "$OSM_DEVOPS"' EXIT
+ git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
+ fi
+ fi
+}
+
+function install_osm() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+
+ trap ctrl_c INT
+
+
+ check_osm_behind_proxy
+ check_packages "git wget curl tar snapd"
+ if [ -n "${INSTALL_JUJU}" ]; then
+ sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
+ fi
+ find_devops_folder
+
+ track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
+
+ track checks checkingroot_ok
+ [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
+ track checks noroot_ok
+ ask_proceed
track checks proceed_ok
echo "Installing OSM"
+ [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
+
echo "Determining IP address of the interface with the default route"
- DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
- [ -z "$DEFAULT_IF" ] && DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
- [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
- DEFAULT_IP=`ip -o -4 a s ${DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
- [ -z "$DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
+ [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
+ [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
+ [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
+ OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
+ [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
# configure apt proxy
[ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
- # if no host is passed in, we need to install lxd/juju, unless explicilty asked not to
- if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then
- check_packages "snapd"
- install_lxd
+ # if lxd is requested, we will install it
+ if [ -n "$INSTALL_LXD" ]; then
+ LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
+ [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
+ $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
fi
track prereq prereqok_ok
- if [ ! -n "$INSTALL_NODOCKER" ]; then
+ if [ -n "$INSTALL_DOCKER" ] || [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
+ if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
+ echo "Kubeadm requires docker, so docker will be installed."
+ fi
DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
[ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
+ [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
$OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
fi
-
track docker_ce docker_ce_ok
- echo "Creating folders for installation"
- [ ! -d "$OSM_DOCKER_WORK_DIR" ] && sudo mkdir -p $OSM_DOCKER_WORK_DIR
- [ ! -d "$OSM_DOCKER_WORK_DIR/osm_pla" -a -n "$INSTALL_PLA" ] && sudo mkdir -p $OSM_DOCKER_WORK_DIR/osm_pla
- sudo cp -b $OSM_DEVOPS/installers/docker/cluster-config.yaml $OSM_DOCKER_WORK_DIR/cluster-config.yaml
+ $OSM_DEVOPS/installers/install_helm_client.sh -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
+ FATAL_TRACK k8scluster "install_helm_client.sh failed"
+ track helm_client install_helm_client_ok
- $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${DEFAULT_IP} -d ${OSM_DOCKER_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
- FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
+ if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
+ KUBEADM_INSTALL_OPTS="-d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
+ $OSM_DEVOPS/installers/install_kubeadm_cluster.sh ${KUBEADM_INSTALL_OPTS} || \
+ FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
+ K8SCLUSTER_ADDONS_INSTALL_OPTS="-i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
+ $OSM_DEVOPS/installers/install_cluster_addons.sh ${K8SCLUSTER_ADDONS_INSTALL_OPTS} || \
+ FATAL_TRACK k8scluster "install_cluster_addons.sh failed"
+ fi
track k8scluster k8scluster_ok
- JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_STACK_NAME} -i ${DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
- [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
- [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
- [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
- [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
- $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
- set_vca_variables
- track juju juju_ok
-
- if [ -z "$OSM_DATABASE_COMMONKEY" ]; then
- OSM_DATABASE_COMMONKEY=$(generate_secret)
- [ -z "OSM_DATABASE_COMMONKEY" ] && FATAL "Cannot generate common db secret"
+ if [ -n "${INSTALL_JUJU}" ]; then
+ JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_CACHELXDIMAGES}"
+ [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
+ [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
+ [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
+ [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
+ [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
+ $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
+ set_vca_variables
fi
+ track juju juju_ok
# Deploy OSM services
- [ -z "$DOCKER_NOBUILD" ] && generate_docker_images
+ [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
track docker_images docker_images_ok
- generate_k8s_manifest_files
- track osm_files manifest_files_ok
- generate_docker_env_files
- track osm_files env_files_ok
-
- deploy_charmed_services
- track deploy_osm deploy_charmed_services_ok
- kube_secrets
- track deploy_osm kube_secrets_ok
- update_manifest_files
- track deploy_osm update_manifest_files_ok
- namespace_vol
- track deploy_osm namespace_vol_ok
+ deploy_mongodb
+ track deploy_osm deploy_mongodb_ok
deploy_osm_services
track deploy_osm deploy_osm_services_k8s_ok
- if [ -n "$INSTALL_PLA"]; then
- # optional PLA install
- deploy_osm_pla_service
- track deploy_osm deploy_osm_pla_ok
- fi
if [ -n "$INSTALL_K8S_MONITOR" ]; then
# install OSM MONITORING
install_k8s_monitoring
track deploy_osm install_k8s_monitoring_ok
fi
+ if [ -n "$INSTALL_NGSA" ]; then
+ # optional NGSA install
+ install_osm_ngsa_service
+ track deploy_osm install_osm_ngsa_ok
+ fi
[ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
track osmclient osmclient_ok
echo -e "Checking OSM health state..."
- $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_STACK_NAME} -k || \
+ $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
(echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
- echo -e "Check OSM status with: kubectl -n ${OSM_STACK_NAME} get all" && \
+ echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
track healthchecks osm_unhealthy didnotconverge)
track healthchecks after_healthcheck_ok
add_local_k8scluster
track final_ops add_local_k8scluster_ok
- wget -q -O- https://osm-download.etsi.org/ftp/osm-11.0-eleven/README2.txt &> /dev/null
+ # if lxd is requested, iptables firewall is updated to work with both docker and LXD
+ if [ -n "$INSTALL_LXD" ]; then
+ arrange_docker_default_network_policy
+ fi
+
+ wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
track end
sudo find /etc/osm
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
return 0
}
+function arrange_docker_default_network_policy() {
+ echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
+ sudo iptables -I DOCKER-USER -j ACCEPT
+ sudo iptables-save | sudo tee /etc/iptables/rules.v4
+ sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
+}
+
function install_k8s_monitoring() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
# install OSM monitoring
function dump_vars(){
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
echo "APT_PROXY_URL=$APT_PROXY_URL"
+ echo "K8S_CLUSTER_ENGINE=$K8S_CLUSTER_ENGINE"
echo "DEVELOP=$DEVELOP"
echo "DEBUG_INSTALL=$DEBUG_INSTALL"
echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
echo "DOCKER_USER=$DOCKER_USER"
echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
+ echo "INSTALL_JUJU=$INSTALL_JUJU"
echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
echo "INSTALL_LXD=$INSTALL_LXD"
- echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
- echo "INSTALL_NOJUJU=$INSTALL_NOJUJU"
- echo "INSTALL_NOLXD=$INSTALL_NOLXD"
+ echo "INSTALL_NGSA=$INSTALL_NGSA"
+ echo "INSTALL_DOCKER=$INSTALL_DOCKER"
echo "INSTALL_ONLY=$INSTALL_ONLY"
echo "INSTALL_PLA=$INSTALL_PLA"
echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
echo "OSM_DEVOPS=$OSM_DEVOPS"
echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
- echo "OSM_STACK_NAME=$OSM_STACK_NAME"
+ echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
+ echo "OSM_NAMESPACE=$OSM_NAMESPACE"
echo "OSM_VCA_HOST=$OSM_VCA_HOST"
echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-LXD_VERSION=4.0
-JUJU_VERSION=2.9
-JUJU_AGENT_VERSION=2.9.17
+function ctrl_c() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+ echo "** Trapped CTRL-C"
+ FATAL "User stopped the installation"
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
UNINSTALL=""
DEVELOP=""
UPDATE=""
COMMIT_ID=""
ASSUME_YES=""
APT_PROXY_URL=""
+K8S_CLUSTER_ENGINE="kubeadm"
INSTALL_FROM_SOURCE=""
DEBUG_INSTALL=""
RELEASE="ReleaseTEN"
REPOSITORY="stable"
-INSTALL_VIMEMU=""
+INSTALL_K8S_MONITOR=""
+INSTALL_NGSA="y"
INSTALL_PLA=""
+INSTALL_VIMEMU=""
LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
LXD_REPOSITORY_PATH=""
INSTALL_LIGHTWEIGHT="y"
OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
INSTALL_ONLY=""
TO_REBUILD=""
-INSTALL_NOLXD=""
-INSTALL_NODOCKER=""
-INSTALL_NOJUJU=""
-INSTALL_K8S_MONITOR=""
+INSTALL_DOCKER=""
+INSTALL_JUJU=""
INSTALL_NOHOSTCLIENT=""
INSTALL_CACHELXDIMAGES=""
OSM_DEVOPS=
OSM_VCA_PUBKEY=
OSM_VCA_CLOUDNAME="localhost"
OSM_VCA_K8S_CLOUDNAME="k8scloud"
-OSM_STACK_NAME=osm
+OSM_NAMESPACE=osm
NO_HOST_PORTS=""
DOCKER_NOBUILD=""
REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
OSM_WORK_DIR="/etc/osm"
-OSM_DOCKER_WORK_DIR="/etc/osm/docker"
-OSM_K8S_WORK_DIR="${OSM_DOCKER_WORK_DIR}/osm_pods"
+OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
OSM_HOST_VOL="/var/lib/osm"
-OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_STACK_NAME}"
-OSM_DOCKER_TAG=latest
+OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
+OSM_DOCKER_TAG="testing-daily"
DOCKER_USER=opensourcemano
PULL_IMAGES="y"
KAFKA_TAG=2.11-1.0.2
-PROMETHEUS_TAG=v2.4.3
-GRAFANA_TAG=latest
+KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
+PROMETHEUS_TAG=v2.28.1
+GRAFANA_TAG=8.1.1
PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
PROMETHEUS_CADVISOR_TAG=latest
KEYSTONEDB_TAG=10
MODULE_DOCKER_TAG=
OSM_INSTALLATION_TYPE="Default"
-while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
+while getopts ":a:b:c:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
case "${o}" in
a)
APT_PROXY_URL=${OPTARG}
COMMIT_ID=${OPTARG}
PULL_IMAGES=""
;;
+ c)
+ K8S_CLUSTER_ENGINE=${OPTARG}
+ [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ] && continue
+ [ "${K8S_CLUSTER_ENGINE}" == "k3s" ] && continue
+ [ "${K8S_CLUSTER_ENGINE}" == "microk8s" ] && continue
+ echo -e "Invalid argument for -c : ' ${K8S_CLUSTER_ENGINE}'\n" >&2
+ usage && exit 1
+ ;;
r)
REPOSITORY="${OPTARG}"
REPO_ARGS+=(-r "$REPOSITORY")
o)
INSTALL_ONLY="y"
[ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
+ [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
;;
O)
INSTALL_TO_OPENSTACK="y"
OSM_VCA_SECRET="${OPTARG}"
;;
s)
- OSM_STACK_NAME="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
+ OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
;;
t)
OSM_DOCKER_TAG="${OPTARG}"
[ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
[ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
[ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
- [ "${OPTARG}" == "nolxd" ] && INSTALL_NOLXD="y" && continue
- [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
+ [ "${OPTARG}" == "lxd" ] && INSTALL_LXD="y" && continue
+ [ "${OPTARG}" == "nolxd" ] && INSTALL_LXD="" && continue
+ [ "${OPTARG}" == "docker" ] && INSTALL_DOCKER="y" && continue
+ [ "${OPTARG}" == "nodocker" ] && INSTALL_DOCKER="" && continue
[ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
[ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
- [ "${OPTARG}" == "nojuju" ] && INSTALL_NOJUJU="--nojuju" && continue
+ [ "${OPTARG}" == "juju" ] && INSTALL_JUJU="y" && continue
+ [ "${OPTARG}" == "nojuju" ] && INSTALL_JUJU="" && continue
[ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
[ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
[ "${OPTARG}" == "pullimages" ] && continue
[ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
[ "${OPTARG}" == "bundle" ] && continue
[ "${OPTARG}" == "k8s" ] && continue
- [ "${OPTARG}" == "lxd" ] && continue
[ "${OPTARG}" == "lxd-cred" ] && continue
[ "${OPTARG}" == "microstack" ] && continue
[ "${OPTARG}" == "overlay" ] && continue
[ "${OPTARG}" == "only-vca" ] && continue
+ [ "${OPTARG}" == "small-profile" ] && continue
[ "${OPTARG}" == "vca" ] && continue
[ "${OPTARG}" == "ha" ] && continue
[ "${OPTARG}" == "tag" ] && continue
[ "${OPTARG}" == "registry" ] && continue
[ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
+ [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
+ [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
[ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
[ "${OPTARG}" == "nocachelxdimages" ] && continue
[ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
# Uninstall if "--uninstall"
if [ -n "$UNINSTALL" ]; then
if [ -n "$CHARMED" ]; then
- track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
else
exit 0
fi
-# Charmed installation
+# Installation starts here
+
+# Get README and create OSM_TRACK_INSTALLATION_ID
+wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README.txt &> /dev/null
+export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
+
+# Get OS info to be tracked
+os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}')
+echo $os_distro
+os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}')
+echo $os_release
+os_info="${os_distro}_${os_release}"
+os_info="${os_info// /_}"
+
if [ -n "$CHARMED" ]; then
- ${OSM_DEVOPS}/installers/charmed_install.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
+ # Charmed installation
+ sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
+ ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
FATAL_TRACK charmed_install "charmed_install.sh failed"
+ wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
echo -e "\nDONE"
exit 0
-fi
-
-# Installation to Openstack
-if [ -n "$INSTALL_TO_OPENSTACK" ]; then
+elif [ -n "$INSTALL_TO_OPENSTACK" ]; then
+ # Installation to Openstack
install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
echo -e "\nDONE"
exit 0
+else
+ # Community_installer
+ # Check incompatible options
+ [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
+ [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
+ # Special cases go first
+ # if develop, we force master
+ [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
+ [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
+ [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
+ [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
+ # This is where installation starts
+ install_osm
+ echo -e "\nDONE"
+ exit 0
fi
-
-# Community_installer
-[ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
-[ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
-[ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
-
-# if develop, we force master
-[ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
-
-check_packages "git wget curl tar"
-
-sudo snap install jq
-if [ -z "$OSM_DEVOPS" ]; then
- if [ -n "$TEST_INSTALLER" ]; then
- echo -e "\nUsing local devops repo for OSM installation"
- OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
- else
- echo -e "\nCreating temporary dir for OSM installation"
- OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
- trap 'rm -rf "$OSM_DEVOPS"' EXIT
-
- git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
-
- if [ -z "$COMMIT_ID" ]; then
- echo -e "\nGuessing the current stable release"
- LATEST_STABLE_DEVOPS=`git -C $OSM_DEVOPS tag -l v[0-9].* | sort -V | tail -n1`
- [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
-
- echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
- COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
- else
- echo -e "\nDEVOPS Using commit $COMMIT_ID"
- fi
- git -C $OSM_DEVOPS checkout $COMMIT_ID
- fi
-fi
-
-[ "${OSM_STACK_NAME}" == "osm" ] || OSM_DOCKER_WORK_DIR="$OSM_WORK_DIR/stack/$OSM_STACK_NAME"
-OSM_K8S_WORK_DIR="$OSM_DOCKER_WORK_DIR/osm_pods" && OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_STACK_NAME}"
-[ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
-[ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
-
-#Installation starts here
-wget -q -O- https://osm-download.etsi.org/ftp/osm-11.0-eleven/README.txt &> /dev/null
-export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
-
-track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
-
-install_osm
-echo -e "\nDONE"
-exit 0
-
projects / osm / devops.git / blobdiff