From 16304baf434c7154cdc3ff2f3f534932382e3a52 Mon Sep 17 00:00:00 2001 From: garciadeblas Date: Wed, 11 May 2016 14:47:39 +0200 Subject: [PATCH] New script to install automatically openmano Signed-off-by: garciadeblas --- scripts/install-openmano.sh | 248 ++++++++++++++++++++++++++++++++++++ 1 file changed, 248 insertions(+) create mode 100755 scripts/install-openmano.sh diff --git a/scripts/install-openmano.sh b/scripts/install-openmano.sh new file mode 100755 index 00000000..3d2db5f3 --- /dev/null +++ b/scripts/install-openmano.sh @@ -0,0 +1,248 @@ +#!/bin/bash + +## +# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U. +# This file is part of openmano +# All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may +# not use this file except in compliance with the License. You may obtain +# a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations +# under the License. +# +# For those usages not covered by the Apache License, Version 2.0 please +# contact with: nfvlabs@tid.es +## + +#ONLY TESTED for Ubuntu 14.10 14.04, CentOS7 and RHEL7 +#Get needed packages, source code and configure to run openmano +#Ask for database user and password if not provided +# $1: database user +# $2: database password + +function usage(){ + echo -e "usage: sudo $0 [db-user [db-passwd]]\n Install source code in ./openmano" +} + +function install_packages(){ + [ -x /usr/bin/apt-get ] && apt-get install -y $* + [ -x /usr/bin/yum ] && yum install -y $* + + #check properly installed + for PACKAGE in $* + do + PACKAGE_INSTALLED="no" + [ -x /usr/bin/apt-get ] && dpkg -l $PACKAGE &>> /dev/null && PACKAGE_INSTALLED="yes" + [ -x /usr/bin/yum ] && yum list installed $PACKAGE &>> /dev/null && PACKAGE_INSTALLED="yes" + if [ "$PACKAGE_INSTALLED" = "no" ] + then + echo "failed to install package '$PACKAGE'. Revise network connectivity and try again" + exit -1 + fi + done +} + +#check root privileges and non a root user behind +[ "$1" == "-h" -o "$1" == "--help" ] && usage && exit 0 +[ "$USER" != "root" ] && echo "Needed root privileges" >&2 && usage >&2 && exit -1 +[ -z "$SUDO_USER" -o "$SUDO_USER" = "root" ] && echo "Must be runned with sudo from a non root user" >&2 && usage >&2 && exit -1 + + +#Discover Linux distribution +#try redhat type +[ -f /etc/redhat-release ] && _DISTRO=$(cat /etc/redhat-release 2>/dev/null | cut -d" " -f1) +#if not assuming ubuntu type +[ -f /etc/redhat-release ] || _DISTRO=$(lsb_release -is 2>/dev/null) +if [ "$_DISTRO" == "Ubuntu" ] +then + _RELEASE="14" + if ! lsb_release -rs | grep -q "14." + then + read -e -p "WARNING! Not tested Ubuntu version. Continue assuming a '$_RELEASE' type? (y/N)" KK + [ "$KK" != "y" -a "$KK" != "yes" ] && echo "Cancelled" && exit 0 + fi +elif [ "$_DISTRO" == "CentOS" ] +then + _RELEASE="7" + if ! cat /etc/redhat-release | grep -q "7." + then + read -e -p "WARNING! Not tested CentOS version. Continue assuming a '_RELEASE' type? (y/N)" KK + [ "$KK" != "y" -a "$KK" != "yes" ] && echo "Cancelled" && exit 0 + fi +elif [ "$_DISTRO" == "Red" ] +then + _RELEASE="7" + if ! cat /etc/redhat-release | grep -q "7." + then + read -e -p "WARNING! Not tested Red Hat OS version. Continue assuming a '_RELEASE' type? (y/N)" KK + [ "$KK" != "y" -a "$KK" != "yes" ] && echo "Cancelled" && exit 0 + fi +else #[ "$_DISTRO" != "Ubuntu" -a "$_DISTRO" != "CentOS" -a "$_DISTRO" != "Red" ] + _DISTRO_DISCOVER=$_DISTRO + [ -x /usr/bin/apt-get ] && _DISTRO="Ubuntu" && _RELEASE="14" + [ -x /usr/bin/yum ] && _DISTRO="CentOS" && _RELEASE="7" + read -e -p "WARNING! Not tested Linux distribution '$_DISTRO_DISCOVER '. Continue assuming a '$_DISTRO $_RELEASE' type? (y/N)" KK + [ "$KK" != "y" -a "$KK" != "yes" ] && echo "Cancelled" && exit 0 +fi + + + +echo ' +################################################################# +##### UPDATE REPOSITORIES ##### +#################################################################' +[ "$_DISTRO" == "Ubuntu" ] && apt-get update -y + +[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && yum check-update -y +[ "$_DISTRO" == "CentOS" ] && sudo yum install -y epel-release +[ "$_DISTRO" == "Red" ] && wget http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm \ + && sudo rpm -ivh epel-release-7-5.noarch.rpm && sudo yum install -y epel-release && rm -f epel-release-7-5.noarch.rpm +[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && sudo yum repolist + + +echo ' +################################################################# +##### INSTALL REQUIRED PACKAGES ##### +#################################################################' +[ "$_DISTRO" == "Ubuntu" ] && install_packages "git screen wget mysql-server" +[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "git screen wget mariadb mariadb-server" + +if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] +then + #start services. By default CentOS does not start services + service mariadb start + service httpd start + systemctl enable mariadb + systemctl enable httpd + read -e -p "Do you want to configure mariadb (recommended if not done before) (Y/n)" KK + [ "$KK" != "n" -a "$KK" != "no" ] && mysql_secure_installation + + read -e -p "Do you want to set firewall to grant web access port 80,443 (Y/n)" KK + [ "$KK" != "n" -a "$KK" != "no" ] && + firewall-cmd --permanent --zone=public --add-service=http && + firewall-cmd --permanent --zone=public --add-service=https && + firewall-cmd --reload +fi + +#check and ask for database user password. Must be done after database installation +[ -n "$1" ] && DBUSER=$1 +[ -z "$1" ] && DBUSER=root +[ -n "$2" ] && DBPASSWD="-p$2" +[ -z "$2" ] && DBPASSWD="" +echo -e "\nCheking database connection and ask for credentials" +while ! echo "" | mysql -u$DBUSER $DBPASSWD +do + [ -n "$logintry" ] && echo -e "\nInvalid database credentials!!!. Try again (Ctrl+c to abort)" + [ -z "$logintry" ] && echo -e "\nProvide database credentials" + read -e -p "database user? ($DBUSER) " DBUSER_ + [ -n "$DBUSER_" ] && DBUSER=$DBUSER_ + read -e -s -p "database password? (Enter for not using password) " DBPASSWD_ + [ -n "$DBPASSWD_" ] && DBPASSWD="-p$DBPASSWD_" + [ -z "$DBPASSWD_" ] && DBPASSWD="" + logintry="yes" +done + +echo ' +################################################################# +##### INSTALL PYTHON PACKAGES ##### +#################################################################' +[ "$_DISTRO" == "Ubuntu" ] && install_packages "python-yaml python-libvirt python-bottle python-mysqldb python-jsonschema python-paramiko python-argcomplete python-requests" +[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "PyYAML libvirt-python MySQL-python python-jsonschema python-paramiko python-argcomplete python-requests" + +#The only way to install python-bottle on Centos7 is with easy_install or pip +[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && easy_install -U bottle + +#install openstack client needed for using openstack as a VIM +[ "$_DISTRO" == "Ubuntu" ] && install_packages "python-novaclient python-keystoneclient python-glanceclient python-neutronclient" +[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "python-devel" && easy_install python-novaclient python-keystoneclient python-glanceclient python-neutronclient #TODO revise if gcc python-pip is needed + +echo ' +################################################################# +##### DOWNLOAD SOURCE ##### +#################################################################' +su $SUDO_USER -c 'git clone https://osm.etsi.org/gerrit/osm/openmano.git openmano' + +echo ' +################################################################# +##### CREATE DATABASE ##### +#################################################################' +mysqladmin -u$DBUSER $DBPASSWD create mano_db + +echo "CREATE USER 'mano'@'localhost' identified by 'manopw';" | mysql -u$DBUSER $DBPASSWD +echo "GRANT ALL PRIVILEGES ON mano_db.* TO 'mano'@'localhost';" | mysql -u$DBUSER $DBPASSWD + +su $SUDO_USER -c 'openmano/database_utils/init_mano_db.sh -u mano -p manopw' + +if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] +then + echo ' +################################################################# +##### CONFIGURE firewalld ##### +#################################################################' + read -e -p "Configure firewalld for openmanod port 9090? (Y/n)" KK + if [ "$KK" != "n" -a "$KK" != "no" ] + then + #Creates a service file for openmano + echo ' + + openmanod + openmanod service + +' > /etc/firewalld/services/openmanod.xml + #put proper permissions + pushd /etc/firewalld/services > /dev/null + restorecon openmanod.xml + chmod 640 openmanod.xml + popd > /dev/null + #Add the openmanod service to the default zone permanently and reload the firewall configuration + firewall-cmd --permanent --add-service=openmanod > /dev/null + firewall-cmd --reload > /dev/null + echo "done." + else + echo "skipping." + fi +fi + +echo ' +################################################################# +##### CONFIGURE OPENMANO CLIENT ##### +#################################################################' +#creates a link at ~/bin +su $SUDO_USER -c 'mkdir -p ~/bin' +rm -f /home/${SUDO_USER}/bin/openmano +rm -f /home/${SUDO_USER}/bin/service-openmano +ln -s ${PWD}/openmano/openmano/openmano /home/${SUDO_USER}/bin/openmano +ln -s ${PWD}/openmano/scripts/service-openmano.sh /home/${SUDO_USER}/bin/service-openmano + +#insert /home//bin in the PATH +#skiped because normally this is done authomatically when ~/bin exist +#if ! su $SUDO_USER -c 'echo $PATH' | grep -q "/home/${SUDO_USER}/bin" +#then +# echo " inserting /home/$SUDO_USER/bin in the PATH at .bashrc" +# su $SUDO_USER -c 'echo "PATH=\$PATH:/home/\${USER}/bin" >> ~/.bashrc' +#fi + +#configure arg-autocomplete for this user +#in case of minimal instalation this package is not installed by default +[[ "$_DISTRO" == "CentOS" || "$_DISTRO" == "Red" ]] && yum install -y bash-completion +#su $SUDO_USER -c 'mkdir -p ~/.bash_completion.d' +su $SUDO_USER -c 'activate-global-python-argcomplete --user' +if ! grep -q bash_completion.d/python-argcomplete.sh /home/${SUDO_USER}/.bashrc +then + echo " inserting .bash_completion.d/python-argcomplete.sh execution at .bashrc" + su $SUDO_USER -c 'echo ". /home/${USER}/.bash_completion.d/python-argcomplete.sh" >> ~/.bashrc' +fi + +echo +echo "Done! you may need to logout and login again for loading the configuration" +echo " Run './openmano/scripts/service-openmano.sh start' for starting openmano in a screen" + + + -- 2.17.1