+++ /dev/null
-#!/bin/bash
-
-##
-# Copyright 2015 Telefonica Investigacion y Desarrollo, S.A.U.
-# This file is part of openmano
-# All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-#
-# For those usages not covered by the Apache License, Version 2.0 please
-# contact with: nfvlabs@tid.es
-##
-
-#This script can be used as a basic test of openmano.
-#WARNING: It destroy the database content
-
-
-function usage(){
- echo -e "usage: ${BASH_SOURCE[0]} [OPTIONS] <action>\n test openmano with fake tenant, datancenters, etc."\
- "It assumes that you have configured openmano cli with HOST,PORT,TENANT with environment variables"
- "If not, it will use by default localhost:9080 and creates a new TENANT"
- echo -e " -h --help shows this help"
-}
-
-function is_valid_uuid(){
- echo "$1" | grep -q -E '^[0-9a-f]{8}-([0-9a-f]{4}-){3}[0-9a-f]{12}$' && return 0
- return 1
-}
-
-DIRNAME=$(dirname $(readlink -f ${BASH_SOURCE[0]}))
-DIRmano=$(dirname $DIRNAME)
-DIRscript=${DIRmano}/scripts
-
-#detect paths of executables, preceding the relative paths
-openmano=openmano && [[ -x "${DIRmano}/openmano" ]] && openmano="${DIRmano}/openmano"
-service_openmano=service-openmano && [[ -x "$DIRscript/service-openmano" ]] &&
- service_openmano="$DIRscript/service-openmano"
-initopenvim="initopenvim"
-openvim="openvim"
-
-function _exit()
-{
- EXIT_STATUS=$1
- for item in $ToDelete
- do
- command=${item%%:*}
- uuid=${item#*:}
- [[ $command == "datacenter-detach" ]] && force="" || force=-f
- printf "%-50s" "$command $uuid:"
- ! $openmano $command $uuid $force >> /dev/null && echo FAIL && EXIT_STATUS=1 || echo OK
- done
- [[ ${BASH_SOURCE[0]} != $0 ]] && return $1 || exit $EXIT_STATUS
-}
-
-
-# process options
-source ${DIRscript}/get-options.sh "force:-f help:h insert-bashrc init-openvim:initopenvim install-openvim screen" \
- $* || _exit 1
-
-# help
-[ -n "$option_help" ] && usage && _exit 0
-
-
-ToDelete=""
-DCs="dc-fake1-openstack dc-fake2-openvim" #dc-fake3-vmware
-Ts="fake-tenant1 fake-tenand2"
-SDNs="sdn-fake1-opendaylight sdn-fake2-floodlight sdn-fake3-onos"
-
-for T in $Ts
-do
- printf "%-50s" "Creating fake tenant '$T':"
- ! result=`$openmano tenant-create "$T"` && echo FAIL && echo " $result" && _exit 1
- tenant=`echo $result |gawk '{print $1}'`
- ! is_valid_uuid $tenant && echo "FAIL" && echo " $result" && _exit 1
- echo $tenant
- ToDelete="tenant-delete:$tenant $ToDelete"
- [[ -z "$OPENMANO_TENANT" ]] && export OPENMANO_TENANT=$tenant
-done
-
-index=0
-for DC in $DCs
-do
- index=$((index+1))
- printf "%-50s" "Creating datacenter '$DC':"
- ! result=`$openmano datacenter-create "$DC" "http://$DC/v2.0" --type=${DC##*-} --config='{insecure: True}'` &&
- echo FAIL && echo " $result" && _exit 1
- datacenter=`echo $result |gawk '{print $1}'`
- ! is_valid_uuid $datacenter && echo "FAIL" && echo " $result" && _exit 1
- echo $datacenter
- eval DC${index}=$datacenter
- ToDelete="datacenter-delete:$datacenter $ToDelete"
- [[ -z "$datacenter_empty" ]] && datacenter_empty=datacenter
-
- printf "%-50s" "Attaching openmano tenant to the datacenter:"
- ! result=`$openmano datacenter-attach "$DC" --vim-tenant-name=osm --config='{insecure: False}'` &&
- echo FAIL && echo " $result" && _exit 1
- ToDelete="datacenter-detach:$datacenter $ToDelete"
- echo OK
-done
-
-printf "%-50s" "Datacenter list:"
-! result=`$openmano datacenter-list` &&
- echo "FAIL" && echo " $result" && _exit 1
-for verbose in "" -v -vv -vvv
-do
- ! result=`$openmano datacenter-list "$DC" $verbose` &&
- echo "FAIL" && echo " $result" && _exit 1
-done
-echo OK
-
-dpid_prefix=55:56:57:58:59:60:61:0
-dpid_sufix=0
-for SDN in $SDNs
-do
- printf "%-50s" "Creating SDN controller '$SDN':"
- ! result=`$openmano sdn-controller-create "$SDN" --ip 4.5.6.7 --port 80 --type=${SDN##*-} \
- --user user --passwd p --dpid=${dpid_prefix}${dpid_sufix}` && echo "FAIL" && echo " $result" && _exit 1
- sdn=`echo $result |gawk '{print $1}'`
- #check a valid uuid is obtained
- ! is_valid_uuid $sdn && echo "FAIL" && echo " $result" && _exit 1
- echo $sdn
- ToDelete="sdn-controller-delete:$sdn $ToDelete"
- dpid_sufix=$((dpid_sufix+1))
-
-done
-printf "%-50s" "Edit SDN-controller:"
-for edit in user=u password=p ip=5.6.6.7 port=81 name=name dpid=45:55:54:45:44:44:55:67
-do
- ! result=`$openmano sdn-controller-edit $sdn -f --"${edit}"` &&
- echo "FAIL" && echo " $result" && _exit 1
-done
-echo OK
-
-printf "%-50s" "SDN-controller list:"
-! result=`$openmano sdn-controller-list` &&
- echo "FAIL" && echo " $result" && _exit 1
-for verbose in "" -v -vv -vvv
-do
- ! result=`$openmano sdn-controller-list "$sdn" $verbose` &&
- echo "FAIL" && echo " $result" && _exit 1
-done
-echo OK
-
-printf "%-50s" "Add sdn to datacenter:"
-! result=`$openmano datacenter-edit -f $DC --sdn-controller $SDN` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Clear Port mapping:"
-! result=`$openmano datacenter-sdn-port-mapping-clear -f $DC` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Set Port mapping:"
-! result=`$openmano datacenter-sdn-port-mapping-set -f $DC ${DIRmano}/sdn/sdn_port_mapping.yaml` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "List Port mapping:"
-for verbose in "" -v -vv -vvv
-do
- ! result=`$openmano datacenter-sdn-port-mapping-list "$DC" $verbose` &&
- echo "FAIL" && echo " $result" && _exit 1
-done
-echo OK
-
-printf "%-50s" "Set again Port mapping:"
-! result=`$openmano datacenter-sdn-port-mapping-set -f $DC ${DIRmano}/sdn/sdn_port_mapping.yaml` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Clear again Port mapping:"
-! result=`$openmano datacenter-sdn-port-mapping-clear -f $DC` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Set again Port mapping:"
-! result=`$openmano datacenter-sdn-port-mapping-set -f $DC ${DIRmano}/sdn/sdn_port_mapping.yaml` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Remove datacenter sdn:"
-! result=`$openmano datacenter-edit -f $DC --sdn-controller null` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Negative list port mapping:"
-result=`$openmano datacenter-sdn-port-mapping-list $DC` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Add again datacenter sdn:"
-! result=`$openmano datacenter-edit -f $DC --sdn-controller $SDN` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-printf "%-50s" "Empty list port mapping:"
-! [[ `$openmano datacenter-sdn-port-mapping-list $DC | wc -l` -eq 6 ]] &&
- echo "FAIL" && _exit 1 || echo OK
-
-printf "%-50s" "Set again Port mapping:"
-! result=`$openmano datacenter-sdn-port-mapping-set -f $DC ${DIRmano}/sdn/sdn_port_mapping.yaml` &&
- echo "FAIL" && echo " $result" && _exit 1 || echo OK
-
-_exit 0
-