From 9a5b6ee6e058267c073ba2fd2802fb551853ee90 Mon Sep 17 00:00:00 2001 From: Dominik Fleischmann Date: Tue, 9 Jun 2020 11:45:08 +0200 Subject: [PATCH] Add HA option and minor fixes This commit adds the --ha option which will install the osm-ha bundle instead of the standard osm bundle. Additionally this commit includes the following fixes: - change the use of route to ip route which is preinstalled in Ubuntu Desktop also. - Change final command of post install osmclient message - Change post install osmclient message to be only shown during install and not uninstall. - Fix the deletion of the wrong model in uninstall - Pining Juju snap to 2.7/stable Change-Id: Iccf3bda7ec2f9a2279e5535d819e2a1968a59687 Signed-off-by: Dominik Fleischmann --- installers/charmed_install.sh | 27 +++++++++++++------- installers/charmed_uninstall.sh | 4 +-- installers/full_install_osm.sh | 44 +++++++++++++++++---------------- installers/install_osm.sh | 1 + 4 files changed, 44 insertions(+), 32 deletions(-) diff --git a/installers/charmed_install.sh b/installers/charmed_install.sh index e534c117..297348aa 100755 --- a/installers/charmed_install.sh +++ b/installers/charmed_install.sh @@ -27,6 +27,7 @@ function check_arguments(){ --lxd) LXD_CLOUD="$2" ;; --lxd-cred) LXD_CREDENTIALS="$2" ;; --microstack) MICROSTACK=y ;; + --ha) BUNDLE="osm-ha" ;; --tag) TAG="$2" ;; esac shift @@ -35,9 +36,8 @@ function check_arguments(){ # echo $BUNDLE $KUBECONFIG $LXDENDPOINT } function install_snaps(){ - sudo snap install juju --classic - [ ! -v KUBECFG ] && sudo snap install microk8s --classic && sudo usermod -a -G microk8s ubuntu && mkdir -p ~/.kube && sudo chown -f -R `whoami` ~/.kube - [ -v KUBECFG ] && sudo snap install kubectl --classic && KUBECTL="kubectl --kubeconfig $KUBECFG" + sudo snap install juju --classic --channel=2.7/stable + [ ! -v KUBECFG ] && sudo snap install microk8s --classic && sudo usermod -a -G microk8s `whoami` && mkdir -p ~/.kube && sudo chown -f -R `whoami` ~/.kube } function bootstrap_k8s_lxd(){ @@ -50,6 +50,14 @@ function bootstrap_k8s_lxd(){ else sg microk8s -c "echo ${DEFAULT_IP}-${DEFAULT_IP} | microk8s.enable metallb" sg microk8s -c "microk8s.enable storage dns" + while true + do + sg microk8s -c "microk8s.status" | grep 'storage: enabled' + if [ $? -eq 0 ]; then + break + fi + sleep 1 + done [ ! -v BOOTSTRAP_NEEDED ] && sg microk8s -c "microk8s.config" | juju add-k8s $K8S_CLOUD_NAME $ADD_K8S_OPTS [ -v BOOTSTRAP_NEEDED ] && sg microk8s -c "juju bootstrap microk8s $CONTROLLER_NAME --config controller-service-type=loadbalancer" && K8S_CLOUD_NAME=microk8s @@ -141,9 +149,10 @@ function deploy_charmed_osm(){ function check_osm_deployed() { while true do - pod_name=`sg microk8s -c "$KUBECTL -n osm get pods | grep ui-k8s | grep -v operator" | awk '{print $1}'` - if [[ `sg microk8s -c "$KUBECTL -n osm wait pod $pod_name --for condition=Ready"` ]]; then - if [[ `sg microk8s -c "$KUBECTL -n osm wait pod lcm-k8s-0 --for condition=Ready"` ]]; then + pod_name=`sg microk8s -c "microk8s.kubectl -n osm get pods | grep ui-k8s | grep -v operator" | awk '{print $1; exit}'` + + if [[ `sg microk8s -c "microk8s.kubectl -n osm wait pod $pod_name --for condition=Ready"` ]]; then + if [[ `sg microk8s -c "microk8s.kubectl -n osm wait pod lcm-k8s-0 --for condition=Ready"` ]]; then break fi fi @@ -167,7 +176,7 @@ function create_overlay() { local vca_cacert=$(cat $HOME/.local/share/juju/controllers.yaml | yq --arg CONTROLLER_NAME $CONTROLLER_NAME '.controllers[$CONTROLLER_NAME]["ca-cert"]' --raw-output | base64 | tr -d \\n) # Calculate the default route of this machine - local DEFAULT_IF=`route -n |awk '$1~/^0.0.0.0/ {print $8}'` + local DEFAULT_IF=`ip route list match 0.0.0.0 | awk '{print $5}'` local vca_apiproxy=`ip -o -4 a |grep ${DEFAULT_IF}|awk '{split($4,a,"/"); print a[1]}'` # Generate a new overlay.yaml, overriding any existing one @@ -238,7 +247,7 @@ function install_microstack() { ubuntu1604 ssh-keygen -t rsa -N "" -f ~/.ssh/microstack microstack.openstack keypair create --public-key ~/.ssh/microstack.pub microstack - export OSM_HOSTNAME=`juju status --format yaml | yq -r '.applications["nbi-k8s"].address'` + export OSM_HOSTNAME=`juju status --format json | jq -rc '.applications."nbi-k8s".address'` osm vim-create --name microstack-site \ --user admin \ --password keystone \ @@ -255,7 +264,7 @@ function install_microstack() { version: 3}' } -DEFAULT_IF=`route -n |awk '$1~/^0.0.0.0/ {print $8}'` +DEFAULT_IF=`ip route list match 0.0.0.0 | awk '{print $5}'` DEFAULT_IP=`ip -o -4 a |grep ${DEFAULT_IF}|awk '{split($4,a,"/"); print a[1]}'` check_arguments $@ diff --git a/installers/charmed_uninstall.sh b/installers/charmed_uninstall.sh index 3242446f..ef2b293c 100755 --- a/installers/charmed_uninstall.sh +++ b/installers/charmed_uninstall.sh @@ -14,7 +14,7 @@ # -juju destroy-model osm --destroy-storage -juju destroy-model test --destroy-storage +juju destroy-model osm --destroy-storage -y +juju destroy-model test --destroy-storage -y sudo snap unalias osm sudo snap remove osmclient diff --git a/installers/full_install_osm.sh b/installers/full_install_osm.sh index ae5c83ec..99999269 100755 --- a/installers/full_install_osm.sh +++ b/installers/full_install_osm.sh @@ -63,10 +63,11 @@ function usage(){ echo -e " --charmed: Deploy and operate OSM with Charms on k8s" echo -e " [--bundle ]: Specify with which bundle to deploy OSM with charms (--charmed option)" echo -e " [--k8s ]: Specify with which kubernetes to deploy OSM with charms (--charmed option)" - echo -e " [--vca ]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)" - echo -e " [--lxd ]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)" + echo -e " [--vca ]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)" + echo -e " [--lxd ]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)" echo -e " [--lxd-cred ]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)" echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)" + echo -e " [--ha]: Installs High Availability bundle. (--charmed option)" echo -e " [--tag]: Docker image tag" } @@ -250,7 +251,7 @@ function check_install_iptables_persistent(){ #Configure NAT rules, based on the current IP addresses of containers function nat(){ check_install_iptables_persistent - + echo -e "\nConfiguring NAT rules" echo -e " Required root privileges" sudo $OSM_DEVOPS/installers/nat_osm @@ -396,7 +397,7 @@ function install_docker_compose() { function install_juju() { echo "Installing juju" - sudo snap install juju --classic + sudo snap install juju --classic --channel=2.7/stable [[ ":$PATH": != *":/snap/bin:"* ]] && PATH="/snap/bin:${PATH}" echo "Finished installation of juju" return 0 @@ -527,7 +528,7 @@ function generate_docker_images() { if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS ; then sg docker -c "docker pull google/cadvisor:${PROMETHEUS_CADVISOR_TAG}" || FATAL "cannot get prometheus cadvisor docker image" - fi + fi echo "Finished generation of docker images" } @@ -1417,6 +1418,7 @@ while getopts ":b:r:c:k:u:R:D:o:m:H:S:s:w:t:U:P:A:l:L:K:-: hy" o; do [ "${OPTARG}" == "lxd" ] && continue [ "${OPTARG}" == "lxd-cred" ] && continue [ "${OPTARG}" == "microstack" ] && continue + [ "${OPTARG}" == "ha" ] && continue [ "${OPTARG}" == "tag" ] && continue [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue echo -e "Invalid option: '--$OPTARG'\n" >&2 @@ -1455,23 +1457,23 @@ if [ -n "$CHARMED" ]; then /usr/share/osm-devops/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D /usr/share/osm-devops -t $DOCKER_TAG "$@" else /usr/share/osm-devops/installers/charmed_install.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D /usr/share/osm-devops -t $DOCKER_TAG "$@" - fi - echo "Your installation is now complete, follow these steps for configuring the osmclient:" - echo - echo "1. Get the NBI IP with the following command:" - echo - echo "juju status --format yaml | yq -r '.applications[\"nbi-k8s\"].address'" - echo - echo "2. Create the OSM_HOSTNAME environment variable with the NBI IP" - echo - echo "export OSM_HOSTNAME=" - echo - echo "3. Add the previous command to your .bashrc for other Shell sessions" - echo - echo "export OSM_HOSTNAME= >> ~/.bashrc" - echo - echo "DONE" + echo "Your installation is now complete, follow these steps for configuring the osmclient:" + echo + echo "1. Get the NBI IP with the following command:" + echo + echo NBI_IP='`juju status --format json | jq -rc '"'"'.applications."nbi-k8s".address'"'"'`' + echo + echo "2. Create the OSM_HOSTNAME environment variable with the NBI IP" + echo + echo "export OSM_HOSTNAME=\$NBI_IP" + echo + echo "3. Add the previous command to your .bashrc for other Shell sessions" + echo + echo "echo \"export OSM_HOSTNAME=\$NBI_IP\" >> ~/.bashrc" + echo + echo "DONE" + fi exit 0 fi diff --git a/installers/install_osm.sh b/installers/install_osm.sh index 4ede4191..36593541 100755 --- a/installers/install_osm.sh +++ b/installers/install_osm.sh @@ -75,6 +75,7 @@ function usage(){ echo -e " [--lxd ]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)" echo -e " [--lxd-cred ]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)" echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)" + echo -e " [--ha]: Installs High Availability bundle. (--charmed option)" echo -e " [--tag]: Docker image tag" } -- 2.25.1