From: garciadeblas <gerardo.garciadeblas@telefonica.com>
Date: Wed, 11 May 2016 12:47:39 +0000 (+0200)
Subject: New script to install automatically openmano
X-Git-Tag: v1.0.0~78^2~2
X-Git-Url: https://osm.etsi.org/gitweb/?a=commitdiff_plain;h=refs%2Fchanges%2F09%2F209%2F1;p=osm%2FRO.git

New script to install automatically openmano

Signed-off-by: garciadeblas <gerardo.garciadeblas@telefonica.com>
---

diff --git a/scripts/install-openmano.sh b/scripts/install-openmano.sh
new file mode 100755
index 00000000..3d2db5f3
--- /dev/null
+++ b/scripts/install-openmano.sh
@@ -0,0 +1,248 @@
+#!/bin/bash
+
+##
+# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
+# This file is part of openmano
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+# For those usages not covered by the Apache License, Version 2.0 please
+# contact with: nfvlabs@tid.es
+##
+
+#ONLY TESTED for Ubuntu 14.10 14.04, CentOS7 and RHEL7
+#Get needed packages, source code and configure to run openmano
+#Ask for database user and password if not provided
+#        $1: database user
+#        $2: database password 
+
+function usage(){
+    echo  -e "usage: sudo $0 [db-user [db-passwd]]\n  Install source code in ./openmano"
+}
+
+function install_packages(){
+    [ -x /usr/bin/apt-get ] && apt-get install -y $*
+    [ -x /usr/bin/yum ]     && yum install -y $*   
+    
+    #check properly installed
+    for PACKAGE in $*
+    do
+        PACKAGE_INSTALLED="no"
+        [ -x /usr/bin/apt-get ] && dpkg -l $PACKAGE            &>> /dev/null && PACKAGE_INSTALLED="yes"
+        [ -x /usr/bin/yum ]     && yum list installed $PACKAGE &>> /dev/null && PACKAGE_INSTALLED="yes" 
+        if [ "$PACKAGE_INSTALLED" = "no" ]
+        then
+            echo "failed to install package '$PACKAGE'. Revise network connectivity and try again"
+            exit -1
+       fi
+    done
+}
+
+#check root privileges and non a root user behind
+[ "$1" == "-h" -o "$1" == "--help" ] && usage && exit 0
+[ "$USER" != "root" ] && echo "Needed root privileges" >&2 && usage >&2 && exit -1
+[ -z "$SUDO_USER" -o "$SUDO_USER" = "root" ] && echo "Must be runned with sudo from a non root user"  >&2 && usage >&2 && exit -1
+
+
+#Discover Linux distribution
+#try redhat type
+[ -f /etc/redhat-release ] && _DISTRO=$(cat /etc/redhat-release 2>/dev/null | cut  -d" " -f1) 
+#if not assuming ubuntu type
+[ -f /etc/redhat-release ] || _DISTRO=$(lsb_release -is  2>/dev/null)            
+if [ "$_DISTRO" == "Ubuntu" ]
+then
+    _RELEASE="14"
+    if ! lsb_release -rs | grep -q "14."
+    then 
+        read -e -p "WARNING! Not tested Ubuntu version. Continue assuming a '$_RELEASE' type? (y/N)" KK
+        [ "$KK" != "y" -a  "$KK" != "yes" ] && echo "Cancelled" && exit 0
+    fi
+elif [ "$_DISTRO" == "CentOS" ]
+then
+    _RELEASE="7" 
+    if ! cat /etc/redhat-release | grep -q "7."
+    then
+        read -e -p "WARNING! Not tested CentOS version. Continue assuming a '_RELEASE' type? (y/N)" KK
+        [ "$KK" != "y" -a  "$KK" != "yes" ] && echo "Cancelled" && exit 0
+    fi
+elif [ "$_DISTRO" == "Red" ]
+then
+    _RELEASE="7" 
+    if ! cat /etc/redhat-release | grep -q "7."
+    then
+        read -e -p "WARNING! Not tested Red Hat OS version. Continue assuming a '_RELEASE' type? (y/N)" KK
+        [ "$KK" != "y" -a  "$KK" != "yes" ] && echo "Cancelled" && exit 0
+    fi
+else  #[ "$_DISTRO" != "Ubuntu" -a "$_DISTRO" != "CentOS" -a "$_DISTRO" != "Red" ] 
+    _DISTRO_DISCOVER=$_DISTRO
+    [ -x /usr/bin/apt-get ] && _DISTRO="Ubuntu" && _RELEASE="14"
+    [ -x /usr/bin/yum ]     && _DISTRO="CentOS" && _RELEASE="7"
+    read -e -p "WARNING! Not tested Linux distribution '$_DISTRO_DISCOVER '. Continue assuming a '$_DISTRO $_RELEASE' type? (y/N)" KK
+    [ "$KK" != "y" -a  "$KK" != "yes" ] && echo "Cancelled" && exit 0
+fi
+
+
+
+echo '
+#################################################################
+#####        UPDATE REPOSITORIES                            #####
+#################################################################'
+[ "$_DISTRO" == "Ubuntu" ] && apt-get update -y
+
+[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && yum check-update -y
+[ "$_DISTRO" == "CentOS" ] && sudo yum install -y epel-release
+[ "$_DISTRO" == "Red" ] && wget http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm \
+  && sudo rpm -ivh epel-release-7-5.noarch.rpm && sudo yum install -y epel-release && rm -f epel-release-7-5.noarch.rpm
+[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && sudo yum repolist
+
+
+echo '
+#################################################################
+#####               INSTALL REQUIRED PACKAGES               #####
+#################################################################'
+[ "$_DISTRO" == "Ubuntu" ] && install_packages "git screen wget mysql-server"
+[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "git screen wget mariadb mariadb-server"
+
+if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ]
+then
+    #start services. By default CentOS does not start services
+    service mariadb start
+    service httpd   start
+    systemctl enable mariadb
+    systemctl enable httpd
+    read -e -p "Do you want to configure mariadb (recommended if not done before) (Y/n)" KK
+    [ "$KK" != "n" -a  "$KK" != "no" ] && mysql_secure_installation
+
+    read -e -p "Do you want to set firewall to grant web access port 80,443  (Y/n)" KK
+    [ "$KK" != "n" -a  "$KK" != "no" ] && 
+        firewall-cmd --permanent --zone=public --add-service=http &&
+        firewall-cmd --permanent --zone=public --add-service=https &&
+        firewall-cmd --reload
+fi
+
+#check and ask for database user password. Must be done after database installation
+[ -n "$1" ] && DBUSER=$1
+[ -z "$1" ] && DBUSER=root
+[ -n "$2" ] && DBPASSWD="-p$2"
+[ -z "$2" ] && DBPASSWD=""
+echo -e "\nCheking database connection and ask for credentials"
+while !  echo "" | mysql -u$DBUSER $DBPASSWD
+do
+        [ -n "$logintry" ] &&  echo -e "\nInvalid database credentials!!!. Try again (Ctrl+c to abort)"
+        [ -z "$logintry" ] &&  echo -e "\nProvide database credentials"
+        read -e -p "database user? ($DBUSER) " DBUSER_
+        [ -n "$DBUSER_" ] && DBUSER=$DBUSER_
+        read -e -s -p "database password? (Enter for not using password) " DBPASSWD_
+        [ -n "$DBPASSWD_" ] && DBPASSWD="-p$DBPASSWD_"
+        [ -z "$DBPASSWD_" ] && DBPASSWD=""
+        logintry="yes"
+done
+
+echo '
+#################################################################
+#####        INSTALL PYTHON PACKAGES                        #####
+#################################################################'
+[ "$_DISTRO" == "Ubuntu" ] && install_packages "python-yaml python-libvirt python-bottle python-mysqldb python-jsonschema python-paramiko python-argcomplete python-requests"
+[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "PyYAML libvirt-python MySQL-python python-jsonschema python-paramiko python-argcomplete python-requests"
+
+#The only way to install python-bottle on Centos7 is with easy_install or pip
+[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && easy_install -U bottle
+
+#install openstack client needed for using openstack as a VIM
+[ "$_DISTRO" == "Ubuntu" ] && install_packages "python-novaclient python-keystoneclient python-glanceclient python-neutronclient"
+[ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ] && install_packages "python-devel" && easy_install python-novaclient python-keystoneclient python-glanceclient python-neutronclient #TODO revise if gcc python-pip is needed
+
+echo '
+#################################################################
+#####        DOWNLOAD SOURCE                                #####
+#################################################################'
+su $SUDO_USER -c 'git clone https://osm.etsi.org/gerrit/osm/openmano.git openmano'
+
+echo '
+#################################################################
+#####        CREATE DATABASE                                #####
+#################################################################'
+mysqladmin -u$DBUSER $DBPASSWD create mano_db
+
+echo "CREATE USER 'mano'@'localhost' identified by 'manopw';"   | mysql -u$DBUSER $DBPASSWD
+echo "GRANT ALL PRIVILEGES ON mano_db.* TO 'mano'@'localhost';" | mysql -u$DBUSER $DBPASSWD
+
+su $SUDO_USER -c 'openmano/database_utils/init_mano_db.sh -u mano -p manopw'
+
+if [ "$_DISTRO" == "CentOS" -o "$_DISTRO" == "Red" ]
+then
+    echo '
+#################################################################
+#####        CONFIGURE firewalld                            #####
+#################################################################'
+    read -e -p "Configure firewalld for openmanod port 9090? (Y/n)" KK
+    if [ "$KK" != "n" -a  "$KK" != "no" ]
+    then
+        #Creates a service file for openmano
+        echo '<?xml version="1.0" encoding="utf-8"?>
+<service>
+ <short>openmanod</short>
+ <description>openmanod service</description>
+ <port protocol="tcp" port="9090"/>
+</service>' > /etc/firewalld/services/openmanod.xml
+        #put proper permissions
+        pushd /etc/firewalld/services > /dev/null
+        restorecon openmanod.xml
+        chmod 640 openmanod.xml
+        popd > /dev/null
+        #Add the openmanod service to the default zone permanently and reload the firewall configuration
+        firewall-cmd --permanent --add-service=openmanod > /dev/null
+        firewall-cmd --reload > /dev/null
+        echo "done." 
+    else
+        echo "skipping."
+    fi
+fi
+
+echo '
+#################################################################
+#####             CONFIGURE OPENMANO CLIENT                 #####
+#################################################################'
+#creates a link at ~/bin
+su $SUDO_USER -c 'mkdir -p ~/bin'
+rm -f /home/${SUDO_USER}/bin/openmano
+rm -f /home/${SUDO_USER}/bin/service-openmano
+ln -s ${PWD}/openmano/openmano/openmano /home/${SUDO_USER}/bin/openmano
+ln -s ${PWD}/openmano/scripts/service-openmano.sh  /home/${SUDO_USER}/bin/service-openmano
+
+#insert /home/<user>/bin in the PATH
+#skiped because normally this is done authomatically when ~/bin exist
+#if ! su $SUDO_USER -c 'echo $PATH' | grep -q "/home/${SUDO_USER}/bin"
+#then
+#    echo "    inserting /home/$SUDO_USER/bin in the PATH at .bashrc"
+#    su $SUDO_USER -c 'echo "PATH=\$PATH:/home/\${USER}/bin" >> ~/.bashrc'
+#fi
+
+#configure arg-autocomplete for this user
+#in case of minimal instalation this package is not installed by default
+[[ "$_DISTRO" == "CentOS" || "$_DISTRO" == "Red" ]] && yum install -y bash-completion
+#su $SUDO_USER -c 'mkdir -p ~/.bash_completion.d'
+su $SUDO_USER -c 'activate-global-python-argcomplete --user'
+if ! grep -q bash_completion.d/python-argcomplete.sh /home/${SUDO_USER}/.bashrc
+then
+    echo "    inserting .bash_completion.d/python-argcomplete.sh execution at .bashrc"
+    su $SUDO_USER -c 'echo ". /home/${USER}/.bash_completion.d/python-argcomplete.sh" >> ~/.bashrc'
+fi
+
+echo
+echo "Done!  you may need to logout and login again for loading the configuration"
+echo " Run './openmano/scripts/service-openmano.sh start' for starting openmano in a screen"
+
+
+