From: Adam Israel Date: Fri, 30 Jun 2017 16:04:00 +0000 (-0400) Subject: Remove core osm layers to juju-charms repo X-Git-Tag: v3.0.0rc~5 X-Git-Url: https://osm.etsi.org/gitweb/?a=commitdiff_plain;h=eca441c3a6166b1b319eb31858086c85f21d33aa;p=osm%2FSO.git Remove core osm layers to juju-charms repo Remove the sshproxy and vnfproxy layers to the juju-charms repository Signed-off-by: Adam Israel --- diff --git a/charms/layers/sshproxy/.gitignore b/charms/layers/sshproxy/.gitignore deleted file mode 100644 index b8e7ba3a..00000000 --- a/charms/layers/sshproxy/.gitignore +++ /dev/null @@ -1 +0,0 @@ -trusty/ diff --git a/charms/layers/sshproxy/README.md b/charms/layers/sshproxy/README.md deleted file mode 100644 index c66ff751..00000000 --- a/charms/layers/sshproxy/README.md +++ /dev/null @@ -1,97 +0,0 @@ -# Overview - -This is a [Juju] layer intended to ease the development of charms that need -to execute commands over SSH, such as proxy charms. - -# What is a proxy charm? - -A proxy charm is a limited type of charm that does not interact with software running on the same host, such as controlling and configuring a remote device (a static VM image, a router/switch, etc.). It cannot take advantage of some of Juju's key features, such as [scaling], [relations], and [leadership]. - -Proxy charms are primarily a stop-gap, intended to prototype quickly, with the end goal being to develop it into a full-featured charm, which installs and executes code on the same machine as the charm is running. - -# Integration - -After you've [created your charm], open `interfaces.yaml` and add -`layer:sshproxy` to the includes stanza, as shown below: -``` -includes: ['layer:basic', 'layer:sshproxy'] -``` - -## Reactive states - -This layer will set the following states: - -- `sshproxy.configured` This state is set when SSH credentials have been supplied to the charm. - - -## Example -In `reactive/mycharm.py`, you can add logic to execute commands over SSH. This -example is run via a `start` action, and starts a service running on a remote -host. -``` -... -import charms.sshproxy - - -@when('sshproxy.configured') -@when('actions.start') -def start(): - """ Execute's the command, via the start action` using the - configured SSH credentials - """ - sshproxy.ssh("service myservice start") - -``` - -## Actions -This layer includes a built-in `run` action useful for debugging or running arbitrary commands: - -``` -$ juju run-action mycharm/0 run command=hostname -Action queued with id: 014b72f3-bc02-4ecb-8d38-72bce03bbb63 - -$ juju show-action-output 014b72f3-bc02-4ecb-8d38-72bce03bbb63 -results: - output: juju-66a5f3-11 -status: completed -timing: - completed: 2016-10-27 19:53:49 +0000 UTC - enqueued: 2016-10-27 19:53:44 +0000 UTC - started: 2016-10-27 19:53:48 +0000 UTC - -``` -## Known Limitations and Issues - -### Security issues - -- Password and key-based authentications are supported, with the caveat that -both (password and private key) are stored plaintext within the Juju controller. - -# Configuration and Usage - -This layer adds the following configuration options: -- ssh-hostname -- ssh-username -- ssh-password -- ssh-private-key - -Once [configure] those values at any time. Once they are set, the `sshproxy.configured` state flag will be toggled: - -``` -juju deploy mycharm ssh-hostname=10.10.10.10 ssh-username=ubuntu ssh-password=yourpassword -``` -or -``` -juju deploy mycharm ssh-hostname=10.10.10.10 ssh-username=ubuntu ssh-private-key="`cat ~/.ssh/id_rsa`" -``` - - -# Contact Information -Homepage: https://github.com/AdamIsrael/layer-sshproxy - -[Juju]: https://jujucharms.com/about -[configure]: https://jujucharms.com/docs/2.0/charms-config -[scaling]: https://jujucharms.com/docs/2.0/charms-scaling -[relations]: https://jujucharms.com/docs/2.0/charms-relations -[leadership]: https://jujucharms.com/docs/2.0/developer-leadership -[created your charm]: https://jujucharms.com/docs/2.0/developer-getting-started diff --git a/charms/layers/sshproxy/actions.yaml b/charms/layers/sshproxy/actions.yaml deleted file mode 100644 index 501b2f99..00000000 --- a/charms/layers/sshproxy/actions.yaml +++ /dev/null @@ -1,26 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -run: - description: "Run an arbitrary command" - params: - command: - description: "The command to execute." - type: string - default: "" - required: - - command diff --git a/charms/layers/sshproxy/actions/run b/charms/layers/sshproxy/actions/run deleted file mode 100755 index d85d3fac..00000000 --- a/charms/layers/sshproxy/actions/run +++ /dev/null @@ -1,34 +0,0 @@ -#!/usr/bin/env python3 -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## -import sys -sys.path.append('lib') - -from charms.reactive import main -from charms.reactive import set_state -from charmhelpers.core.hookenv import action_fail, action_name - -""" -`set_state` only works here because it's flushed to disk inside the `main()` -loop. remove_state will need to be called inside the action method. -""" -set_state('actions.{}'.format(action_name())) - -try: - main() -except Exception as e: - action_fail(repr(e)) diff --git a/charms/layers/sshproxy/config.yaml b/charms/layers/sshproxy/config.yaml deleted file mode 100644 index 07f37568..00000000 --- a/charms/layers/sshproxy/config.yaml +++ /dev/null @@ -1,34 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -options: - ssh-hostname: - type: string - default: "" - description: "The hostname or IP address of the machine to" - ssh-username: - type: string - default: "" - description: "The username to login as." - ssh-password: - type: string - default: "" - description: "The password used to authenticate." - ssh-private-key: - type: string - default: "" - description: "The private ssh key to be used to authenticate." diff --git a/charms/layers/sshproxy/layer.yaml b/charms/layers/sshproxy/layer.yaml deleted file mode 100644 index 4f095a64..00000000 --- a/charms/layers/sshproxy/layer.yaml +++ /dev/null @@ -1,18 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -includes: ['layer:basic'] # if you use any interfaces, add them here diff --git a/charms/layers/sshproxy/lib/charms/sshproxy.py b/charms/layers/sshproxy/lib/charms/sshproxy.py deleted file mode 100644 index b247bcf2..00000000 --- a/charms/layers/sshproxy/lib/charms/sshproxy.py +++ /dev/null @@ -1,124 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -from charmhelpers.core.hookenv import ( - config, -) -import io -import paramiko - -from subprocess import ( - Popen, - CalledProcessError, - PIPE, -) - - -def _run(cmd, env=None): - """ Run a command, either on the local machine or remotely via SSH. """ - if isinstance(cmd, str): - cmd = cmd.split(' ') if ' ' in cmd else [cmd] - - cfg = config() - if all(k in cfg for k in ['ssh-hostname', 'ssh-username', - 'ssh-password', 'ssh-private-key']): - host = cfg['ssh-hostname'] - user = cfg['ssh-username'] - passwd = cfg['ssh-password'] - key = cfg['ssh-private-key'] - - if host and user and (passwd or key): - return ssh(cmd, host, user, passwd, key) - - p = Popen(cmd, - env=env, - shell=True, - stdout=PIPE, - stderr=PIPE) - stdout, stderr = p.communicate() - retcode = p.poll() - if retcode > 0: - raise CalledProcessError(returncode=retcode, - cmd=cmd, - output=stderr.decode("utf-8").strip()) - return (stdout.decode('utf-8').strip(), stderr.decode('utf-8').strip()) - - -def get_ssh_client(host, user, password=None, key=None): - """Return a connected Paramiko ssh object""" - - client = paramiko.SSHClient() - client.set_missing_host_key_policy(paramiko.AutoAddPolicy()) - - pkey = None - if key: - f = io.StringIO(key) - pkey = paramiko.RSAKey.from_private_key(f) - - ########################################################################### - # There is a bug in some versions of OpenSSH 4.3 (CentOS/RHEL 5) where # - # the server may not send the SSH_MSG_USERAUTH_BANNER message except when # - # responding to an auth_none request. For example, paramiko will attempt # - # to use password authentication when a password is set, but the server # - # could deny that, instead requesting keyboard-interactive. The hack to # - # workaround this is to attempt a reconnect, which will receive the right # - # banner, and authentication can proceed. See the following for more info # - # https://github.com/paramiko/paramiko/issues/432 # - # https://github.com/paramiko/paramiko/pull/438 # - ########################################################################### - - try: - client.connect(host, port=22, username=user, - password=password, pkey=pkey) - except paramiko.ssh_exception.SSHException as e: - if 'Error reading SSH protocol banner' == str(e): - # Once more, with feeling - client.connect(host, port=22, username=user, - password=password, pkey=pkey) - pass - else: - raise paramiko.ssh_exception.SSHException(e) - - return client - - -def sftp(local_file, remote_file, host, user, password=None, key=None): - """Copy a local file to a remote host""" - client = get_ssh_client(host, user, password, key) - - # Create an sftp connection from the underlying transport - sftp = paramiko.SFTPClient.from_transport(client.get_transport()) - sftp.put(local_file, remote_file) - client.close() - - -def ssh(cmd, host, user, password=None, key=None): - """ Run an arbitrary command over SSH. """ - client = get_ssh_client(host, user, password, key) - - cmds = ' '.join(cmd) - stdin, stdout, stderr = client.exec_command(cmds, get_pty=True) - retcode = stdout.channel.recv_exit_status() - client.close() # @TODO re-use connections - if retcode > 0: - output = stderr.read().strip() - raise CalledProcessError(returncode=retcode, cmd=cmd, - output=output) - return ( - stdout.read().decode('utf-8').strip(), - stderr.read().decode('utf-8').strip() - ) diff --git a/charms/layers/sshproxy/metadata.yaml b/charms/layers/sshproxy/metadata.yaml deleted file mode 100644 index effeb6a1..00000000 --- a/charms/layers/sshproxy/metadata.yaml +++ /dev/null @@ -1,31 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -name: sshproxy -summary: Layer to copy files to or run commands on a remote host over ssh -maintainer: Adam Israel -description: | - This layer is intended to provide common ssh functionality, such as - running a command on a remote host. -series: - - trusty - - xenial -tags: - # Replace "misc" with one or more whitelisted tags from this list: - # https://jujucharms.com/docs/stable/authors-charm-metadata - - misc -subordinate: false diff --git a/charms/layers/sshproxy/reactive/sshproxy.py b/charms/layers/sshproxy/reactive/sshproxy.py deleted file mode 100644 index e1508ca0..00000000 --- a/charms/layers/sshproxy/reactive/sshproxy.py +++ /dev/null @@ -1,73 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -from charmhelpers.core.hookenv import ( - action_fail, - action_get, - action_set, - config, -) -from charms.reactive import ( - remove_state, - set_state, - when, -) -import charms.sshproxy -import subprocess - - -@when('config.changed') -def ssh_configured(): - """ Checks to see if the charm is configured with SSH credentials. If so, - set a state flag that can be used to execute ssh-only actions. - - For example: - - @when('sshproxy.configured') - def run_remote_command(cmd): - ... - - @when_not('sshproxy.configured') - def run_local_command(cmd): - ... - """ - cfg = config() - if all(k in cfg for k in ['ssh-hostname', 'ssh-username', - 'ssh-password', 'ssh-private-key']): - set_state('sshproxy.configured') - else: - remove_state('sshproxy.configured') - - -@when('actions.run') -def run_command(): - """ - Run an arbitrary command, either locally or over SSH with the configured - credentials. - """ - try: - cmd = action_get('command') - output, err = charms.sshproxy._run(cmd) - if len(err): - action_fail("Command '{}' returned error code {}".format(cmd, err)) - else: - action_set({'output': output}) - except subprocess.CalledProcessError as e: - action_fail('Command failed: %s (%s)' % - (' '.join(e.cmd), str(e.output))) - finally: - remove_state('actions.run') diff --git a/charms/layers/sshproxy/tests/00-setup b/charms/layers/sshproxy/tests/00-setup deleted file mode 100755 index 1e5f91bc..00000000 --- a/charms/layers/sshproxy/tests/00-setup +++ /dev/null @@ -1,22 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -#!/bin/bash - -sudo add-apt-repository ppa:juju/stable -y -sudo apt-get update -sudo apt-get install amulet python-requests -y diff --git a/charms/layers/sshproxy/tests/10-deploy b/charms/layers/sshproxy/tests/10-deploy deleted file mode 100755 index f5d2f5d6..00000000 --- a/charms/layers/sshproxy/tests/10-deploy +++ /dev/null @@ -1,76 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -#!/usr/bin/python3 - -import amulet -import requests -import unittest -import string -import random - - -class TestCharm(unittest.TestCase): - user = None - passwd = None - - def id_generator(self, size=6, chars=string.ascii_uppercase + string.digits): - return ''.join(random.choice(chars) for _ in range(size)) - - def setUp(self): - - # Setup random user/password - self.user = self.id_generator() - self.passwd = self.id_generator() - - self.d = amulet.Deployment() - - self.d.add('sshproxy') - self.d.add('ubuntu') - - self.d.expose('sshproxy') - - self.d.setup(timeout=900) - self.d.sentry.wait() - - # Add - ubuntu_0 = d.sentry['ubuntu'][0] - ubuntu_0.ssh("sudo adduser {}".format(self.user)) - ubuntu_0.ssh("echo '{}' | sudo passwd {} --stdin".format(self.passwd, self.user)) - - self.unit = self.d.sentry['sshproxy'][0] - - def test_service(self): - - # Configure the unit - - # Run a command - - # Verify the output - - # test we can access over http - # page = requests.get('http://{}'.format(self.unit.info['public-address'])) - # self.assertEqual(page.status_code, 200) - # Now you can use self.d.sentry[SERVICE][UNIT] to address each of the units and perform - # more in-depth steps. Each self.d.sentry[SERVICE][UNIT] has the following methods: - # - .info - An array of the information of that unit from Juju - # - .file(PATH) - Get the details of a file on that unit - # - .file_contents(PATH) - Get plain text output of PATH file from that unit - # - .directory(PATH) - Get details of directory - # - .directory_contents(PATH) - List files and folders in PATH on that unit - # - .relation(relation, service:rel) - Get relation data from return service - pass diff --git a/charms/layers/sshproxy/wheelhouse.txt b/charms/layers/sshproxy/wheelhouse.txt deleted file mode 100644 index ab6de07b..00000000 --- a/charms/layers/sshproxy/wheelhouse.txt +++ /dev/null @@ -1,18 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -paramiko>=1.16.0,<1.17 diff --git a/charms/layers/vnfproxy/README.md b/charms/layers/vnfproxy/README.md deleted file mode 100644 index 8379e50c..00000000 --- a/charms/layers/vnfproxy/README.md +++ /dev/null @@ -1,172 +0,0 @@ -# vnfproxy - -## Overview - -This charm layer is intended for use by vendors who wish to integrate with -OSM. The current release of OSM only supports a lightweight version of Juju -charms, which we will refer to as "proxy charms". Consider the diagram below: - -``` -+---------------------+ +---------------------+ -| <----+ | -| Resource | | Service | -| Orchestrator (RO) +----> Orchestrator (SO) | -| | | | -+------------------+--+ +-------+----^--------+ - | | | - | | | - | | | - +-----v-----+ +-v----+--+ - | <-------+ | - | Virtual | | Proxy | - | Machine | | Charm | - | +-------> | - +-----------+ +---------+ -``` - -The Virtual Machine (VM) is created by the Resource Orchestrator (RO), at the -request of the Service Orchestrator (SO). Once the VM has been created, a -"proxy charm" is deployed in order to facilitate operations between the SO and -your service running within the VM. - -As such, a proxy charm will expose a number of "actions" that are run via the -SO. By default, the following actions are exposed: - -```bash -actions -├── reboot -├── restart -├── run -├── start -└── stop -``` - -Some actions, such as `run` and `reboot`, do not require any additional configuration. `start`, `stop` and `restart`, however, will require you to -implement the command(s) required to interact with your service. - -## Usage - -Create the framework for your proxy charm: - -```bash -$ charm create pingpong -$ cd pingpong -``` - -Modify `layer.yaml` to the following: -```yaml -includes: - - layer:basic - - layer:vnfproxy -``` - -The `metadata.yaml` describes your service. It should look similar to the following: - -```yaml -name: vnfproxy -summary: A layer for developing OSM "proxy" charms. -maintainer: Adam Israel -description: | - VNF "proxy" charms are a lightweight version of a charm that, rather than - installing software on the same machine, execute commands over an ssh channel. -series: - - trusty - - xenial -tags: - - osm - - vnf -subordinate: false -``` - -Implement the default action(s) you wish to support by adding the following code to reactive/pingpong.py and fill in the cmd to be run: - -```python -@when('actions.start') -def start(): - err = '' - try: - cmd = "" - result, err = charms.sshproxy._run(cmd) - except: - action_fail('command failed:' + err) - else: - action_set({'outout': result}) - finally: - remove_flag('actions.start') - - -@when('actions.stop') -def stop(): - err = '' - try: - # Enter the command to stop your service(s) - cmd = "service myname stop" - result, err = charms.sshproxy._run(cmd) - except: - action_fail('command failed:' + err) - else: - action_set({'outout': result}) - finally: - remove_flag('actions.stop') - - -@when('actions.restart') -def restart(): - err = '' - try: - # Enter the command to restart your service(s) - cmd = "service myname restart" - result, err = charms.sshproxy._run(cmd) - except: - action_fail('command failed:' + err) - else: - action_set({'outout': result}) - finally: - remove_flag('actions.restart') -``` - -Rename `README.ex` to `README.md` and describe your application and its usage. - --- fix this. there are cases where the config is useful -- Delete `config.yaml`, since the charm's configuration will be driven by the SO. - -Create the `actions.yaml` file; this will describe the additional operations you would like to perform on or against your service. - -```yaml -set-server: - description: "Set the target IP address and port" - params: - server-ip: - description: "IP on which the target service is listening." - type: string - default: "" - server-port: - description: "Port on which the target service is listening." - type: integer - default: 5555 - required: - - server-ip -set-rate: - description: "Set the rate of packet generation." - params: - rate: - description: "Packet rate." - type: integer - default: 5 -get-stats: - description: "Get the stats." -get-state: - description: "Get the admin state of the target service." -get-rate: - description: "Get the rate set on the target service." -get-server: - description: "Get the target server and IP set" -``` - - -Once you've implemented your actions, you need to compile the various charm layers: -```bash -$ charm build - -``` - -## Contact diff --git a/charms/layers/vnfproxy/actions.yaml b/charms/layers/vnfproxy/actions.yaml deleted file mode 100644 index a9ee2ba0..00000000 --- a/charms/layers/vnfproxy/actions.yaml +++ /dev/null @@ -1,25 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -start: - description: "Stop the service" -stop: - description: "Stop the service" -restart: - description: "Stop the service" -reboot: - description: "Reboot the machine" diff --git a/charms/layers/vnfproxy/actions/reboot b/charms/layers/vnfproxy/actions/reboot deleted file mode 100755 index 751c88cf..00000000 --- a/charms/layers/vnfproxy/actions/reboot +++ /dev/null @@ -1,34 +0,0 @@ -#!/usr/bin/env python3 -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## -import sys -sys.path.append('lib') - -from charms.reactive import main -from charms.reactive import set_state -from charmhelpers.core.hookenv import action_fail - -""" -`set_state` only works here because it's flushed to disk inside the `main()` -loop. remove_state will need to be called inside the action method. -""" -set_state('actions.reboot') - -try: - main() -except Exception as e: - action_fail(repr(e)) diff --git a/charms/layers/vnfproxy/actions/restart b/charms/layers/vnfproxy/actions/restart deleted file mode 100755 index f62929b1..00000000 --- a/charms/layers/vnfproxy/actions/restart +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/env python3 -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -import sys -sys.path.append('lib') - -from charms.reactive import main -from charms.reactive import set_state -from charmhelpers.core.hookenv import action_fail - -""" -`set_state` only works here because it's flushed to disk inside the `main()` -loop. remove_state will need to be called inside the action method. -""" -set_state('actions.restart') - -try: - main() -except Exception as e: - action_fail(repr(e)) diff --git a/charms/layers/vnfproxy/actions/start b/charms/layers/vnfproxy/actions/start deleted file mode 100755 index a9db3d07..00000000 --- a/charms/layers/vnfproxy/actions/start +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/env python3 -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -import sys -sys.path.append('lib') - -from charms.reactive import main -from charms.reactive import set_state -from charmhelpers.core.hookenv import action_fail - -""" -`set_state` only works here because it's flushed to disk inside the `main()` -loop. remove_state will need to be called inside the action method. -""" -set_state('actions.start') - -try: - main() -except Exception as e: - action_fail(repr(e)) diff --git a/charms/layers/vnfproxy/actions/stop b/charms/layers/vnfproxy/actions/stop deleted file mode 100755 index 38904868..00000000 --- a/charms/layers/vnfproxy/actions/stop +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/env python3 -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -import sys -sys.path.append('lib') - -from charms.reactive import main -from charms.reactive import set_state -from charmhelpers.core.hookenv import action_fail - -""" -`set_state` only works here because it's flushed to disk inside the `main()` -loop. remove_state will need to be called inside the action method. -""" -set_state('actions.stop') - -try: - main() -except Exception as e: - action_fail(repr(e)) diff --git a/charms/layers/vnfproxy/icon.svg b/charms/layers/vnfproxy/icon.svg deleted file mode 100644 index e092eef7..00000000 --- a/charms/layers/vnfproxy/icon.svg +++ /dev/null @@ -1,279 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - image/svg+xml - - - - - - - - - - - diff --git a/charms/layers/vnfproxy/layer.yaml b/charms/layers/vnfproxy/layer.yaml deleted file mode 100644 index 89bf2457..00000000 --- a/charms/layers/vnfproxy/layer.yaml +++ /dev/null @@ -1,20 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -includes: - - layer:basic - - layer:sshproxy diff --git a/charms/layers/vnfproxy/metadata.yaml b/charms/layers/vnfproxy/metadata.yaml deleted file mode 100644 index 909643d5..00000000 --- a/charms/layers/vnfproxy/metadata.yaml +++ /dev/null @@ -1,30 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -name: vnfproxy -summary: A layer for developing OSM "proxy" charms. -maintainer: Adam Israel -description: | - VNF "proxy" charms are a lightweight version of a charm that, rather than - installing software on the same machine, execute commands over an ssh channel. -series: - - trusty - - xenial -tags: - - osm - - vnf -subordinate: false diff --git a/charms/layers/vnfproxy/reactive/vnfproxy.py b/charms/layers/vnfproxy/reactive/vnfproxy.py deleted file mode 100644 index 2b26212b..00000000 --- a/charms/layers/vnfproxy/reactive/vnfproxy.py +++ /dev/null @@ -1,75 +0,0 @@ -from charmhelpers.core.hookenv import ( - action_fail, - action_set, -) - -from charms.reactive import ( - when, - remove_state as remove_flag, -) -import charms.sshproxy - - -@when('actions.reboot') -def reboot(): - err = '' - try: - result, err = charms.sshproxy._run("reboot") - except: - action_fail('command failed:' + err) - else: - action_set({'outout': result}) - finally: - remove_flag('actions.reboot') - - -############################################################################### -# Below is an example implementation of the start/stop/restart actions. # -# To use this, copy the below code into your layer and add the appropriate # -# command(s) necessary to perform the action. # -############################################################################### - -# @when('actions.start') -# def start(): -# err = '' -# try: -# cmd = "service myname start" -# result, err = charms.sshproxy._run(cmd) -# except: -# action_fail('command failed:' + err) -# else: -# action_set({'outout': result}) -# finally: -# remove_flag('actions.start') -# -# -# @when('actions.stop') -# def stop(): -# err = '' -# try: -# # Enter the command to stop your service(s) -# cmd = "service myname stop" -# result, err = charms.sshproxy._run(cmd) -# except: -# action_fail('command failed:' + err) -# else: -# action_set({'outout': result}) -# finally: -# remove_flag('actions.stop') -# -# -# @when('actions.restart') -# def restart(): -# err = '' -# try: -# # Enter the command to restart your service(s) -# cmd = "service myname restart" -# result, err = charms.sshproxy._run(cmd) -# except: -# action_fail('command failed:' + err) -# else: -# action_set({'outout': result}) -# finally: -# remove_flag('actions.restart') -# -# diff --git a/charms/layers/vnfproxy/tests/00-setup b/charms/layers/vnfproxy/tests/00-setup deleted file mode 100755 index 1e5f91bc..00000000 --- a/charms/layers/vnfproxy/tests/00-setup +++ /dev/null @@ -1,22 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -#!/bin/bash - -sudo add-apt-repository ppa:juju/stable -y -sudo apt-get update -sudo apt-get install amulet python-requests -y diff --git a/charms/layers/vnfproxy/tests/10-deploy b/charms/layers/vnfproxy/tests/10-deploy deleted file mode 100755 index 5bb90445..00000000 --- a/charms/layers/vnfproxy/tests/10-deploy +++ /dev/null @@ -1,52 +0,0 @@ -## -# Copyright 2016 Canonical Ltd. -# All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -## - -#!/usr/bin/python3 - -import amulet -import requests -import unittest - - -class TestCharm(unittest.TestCase): - def setUp(self): - self.d = amulet.Deployment() - - self.d.add('vnfproxy') - self.d.expose('vnfproxy') - - self.d.setup(timeout=900) - self.d.sentry.wait() - - self.unit = self.d.sentry['vnfproxy'][0] - - def test_service(self): - # test we can access over http - page = requests.get('http://{}'.format(self.unit.info['public-address'])) - self.assertEqual(page.status_code, 200) - # Now you can use self.d.sentry[SERVICE][UNIT] to address each of the units and perform - # more in-depth steps. Each self.d.sentry[SERVICE][UNIT] has the following methods: - # - .info - An array of the information of that unit from Juju - # - .file(PATH) - Get the details of a file on that unit - # - .file_contents(PATH) - Get plain text output of PATH file from that unit - # - .directory(PATH) - Get details of directory - # - .directory_contents(PATH) - List files and folders in PATH on that unit - # - .relation(relation, service:rel) - Get relation data from return service - - -if __name__ == '__main__': - unittest.main()