From: garciadeblas <gerardo.garciadeblas@telefonica.com>
Date: Sat, 29 Oct 2016 12:22:03 +0000 (+0200)
Subject: installer_from_source: refactored uninstall, nat and configure code; new tag v1.0.1
X-Git-Tag: v1.0.1~1
X-Git-Url: https://osm.etsi.org/gitweb/?a=commitdiff_plain;h=55490d4d8625560a021a4f8e11a56c2127549a69;p=osm%2Fdevops.git

installer_from_source: refactored uninstall, nat and configure code; new tag v1.0.1
nat_osm: new ports added: 8008, 80 to the SO-ub container

Change-Id: I2cb9767d904219a916ae89704086b1186189da70
Signed-off-by: garciadeblas <gerardo.garciadeblas@telefonica.com>
---

diff --git a/installers/install_from_source.sh b/installers/install_from_source.sh
index 3a1c959e..19ba1e6c 100755
--- a/installers/install_from_source.sh
+++ b/installers/install_from_source.sh
@@ -23,9 +23,78 @@ function usage(){
     echo -e "     -h / --help:   print this help"
 }
 
+#Uninstall OSM: remove containers
+function uninstall(){
+    if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
+        $OSM_DEVOPS/jenkins/host/clean_container RO
+        $OSM_DEVOPS/jenkins/host/clean_container VCA
+        $OSM_DEVOPS/jenkins/host/clean_container SO
+        #$OSM_DEVOPS/jenkins/host/clean_container UI
+    else
+        lxc stop RO && lxc delete RO
+        lxc stop VCA && lxc delete VCA
+        lxc stop SO-ub && lxc delete SO-ub
+    fi
+}
+
+#Configure NAT rules, based on the current IP addresses of containers
+function nat(){
+    echo -e "\nChecking required packages: iptables-persistent"
+    dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
+    sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
+    echo -e "\nConfiguring NAT rules"
+    echo -e "   Required root privileges"
+    sudo $OSM_DEVOPS/installers/nat_osm
+}
+
+#Configure VCA, SO and RO with the initial configuration:
+#  RO -> tenant:osm, logs to be sent to SO
+#  VCA -> juju-password
+#  SO -> route to Juju Controller, add RO account, add VCA account
+function configure(){
+    #Configure components
+    echo -e "\nConfiguring components"
+    . $OSM_DEVOPS/installers/export_ips
+
+    echo -e "       Configuring RO"
+    lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /opt/openmano/openmanod.cfg
+    lxc exec RO -- service openmano restart
+    time=0; step=1; timelength=10; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
+    RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
+
+    echo -e "       Configuring VCA"
+    JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
+    echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
+    JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
+
+    echo -e "       Configuring SO"
+    sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
+    lxc exec SO-ub -- nohup sudo -b -H /usr/rift/rift-shell -r -i /usr/rift -a /usr/rift/.artifacts -- ./demos/launchpad.py --use-xml-mode
+    time=0; step=20; timelength=200; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
+
+    curl -k --request POST \
+      --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
+      --header 'accept: application/vnd.yang.data+json' \
+      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
+      --header 'cache-control: no-cache' \
+      --header 'content-type: application/vnd.yang.data+json' \
+      --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}'
+
+    curl -k --request PUT \
+      --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
+      --header 'accept: application/vnd.yang.data+json' \
+      --header 'authorization: Basic YWRtaW46YWRtaW4=' \
+      --header 'cache-control: no-cache' \
+      --header 'content-type: application/vnd.yang.data+json' \
+      --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
+
+}
+
 UNINSTALL=""
 DEVELOP=""
 NAT=""
+RECONFIGURE=""
+TEST_INSTALLER=""
 while getopts ":h-:" o; do
     case "${o}" in
         h)
@@ -36,6 +105,8 @@ while getopts ":h-:" o; do
             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
+            [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
+            [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
             echo -e "Invalid option: '--$OPTARG'\n" >&2
             usage && exit 1
             ;;
@@ -49,43 +120,31 @@ while getopts ":h-:" o; do
     esac
 done
 
-echo -e "\nCreating temporary dir for OSM installation"
-TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
-trap 'rm -rf "$TEMPDIR"' EXIT
+if [ -n "$TEST_INSTALLER" ]; then
+    echo -e "\nUsing local devops repo for OSM installation"
+    TEMPDIR="$(dirname $(realpath $(dirname $0)))"
+else
+    echo -e "\nCreating temporary dir for OSM installation"
+    TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
+    trap 'rm -rf "$TEMPDIR"' EXIT
+fi
 
 echo -e "Checking required packages: git"
 dpkg -l git &>/dev/null || ! echo -e "     git not installed.\nInstalling git requires root privileges" || sudo apt install -y git
-echo -e "\nCloning devops repo temporarily"
-git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
-#DEVOPS_COMMITID="tags/v1.0.0"
-DEVOPS_COMMITID="master"
-git -C $TEMPDIR checkout $DEVOPS_COMMITID
-RC_CLONE=$?
+if [ -z "$TEST_INSTALLER" ]; then
+    echo -e "\nCloning devops repo temporarily"
+    git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
+    RC_CLONE=$?
+    DEVOPS_COMMITID="tags/v1.0.1"
+    git -C $TEMPDIR checkout $DEVOPS_COMMITID
+fi
 OSM_DEVOPS=$TEMPDIR
 OSM_JENKINS="$TEMPDIR/jenkins"
 . $OSM_JENKINS/common/all_funcs
 
-if [ -n "$UNINSTALL" ]; then
-    if [ $RC_CLONE ]; then
-        $OSM_DEVOPS/jenkins/host/clean_container RO
-        $OSM_DEVOPS/jenkins/host/clean_container VCA
-        $OSM_DEVOPS/jenkins/host/clean_container SO
-        #$OSM_DEVOPS/jenkins/host/clean_container UI
-    else
-        lxc stop RO && lxc delete RO
-        lxc stop VCA && lxc delete VCA
-        lxc stop SO-ub && lxc delete SO-ub
-    fi
-    exit 0
-fi
-
-if [ -n "$NAT" ]; then
-    echo -e "\nChecking required packages: iptables-persistent"
-    dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
-    sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
-    sudo $OSM_DEVOPS/installers/nat_osm
-    exit 0
-fi
+[ -n "$UNINSTALL" ] && uninstall && exit 0
+[ -n "$NAT" ] && nat && exit 0
+[ -n "$RECONFIGURE" ] && configure && exit 0
 
 #Installation starts here
 wget -q -O- https://osm-download.etsi.org/ftp/osm-1.0-one/README.txt &> /dev/null
@@ -94,60 +153,18 @@ echo -e "\nChecking required packages: wget, curl, tar"
 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt install -y wget curl tar
 
 echo -e "\nCreating the containers and building ..."
-COMMIT_ID="tags/v1.0.0"
-#COMMIT_ID="master"
+COMMIT_ID="tags/v1.0.1"
 [ -n "$DEVELOP" ] && COMMIT_ID="master"
 $OSM_DEVOPS/jenkins/host/start_build RO checkout $COMMIT_ID
 $OSM_DEVOPS/jenkins/host/start_build VCA
 $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID
 $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID
 
-#Install iptables-persistent
-echo -e "\nChecking required packages: iptables-persistent"
-dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
-sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
-
-#Configure NAT rules
-echo -e "\nConfiguring NAT rules"
-echo -e "   Required root privileges"
-sudo $OSM_DEVOPS/installers/nat_osm
+#Install iptables-persistent and configure NAT rules
+nat
 
 #Configure components
-echo -e "\nConfiguring components"
-. $OSM_DEVOPS/installers/export_ips
-
-echo -e "       Configuring RO"
-lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /opt/openmano/openmanod.cfg
-lxc exec RO -- service openmano restart
-time=0; step=1; timelength=10; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
-RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
-
-echo -e "       Configuring VCA"
-JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
-echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
-JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
-
-echo -e "       Configuring SO"
-sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
-lxc exec SO-ub -- nohup sudo -b -H /usr/rift/rift-shell -r -i /usr/rift -a /usr/rift/.artifacts -- ./demos/launchpad.py --use-xml-mode
-time=0; step=18; timelength=180; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
-
-curl -k --request POST \
-  --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
-  --header 'accept: application/vnd.yang.data+json' \
-  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
-  --header 'cache-control: no-cache' \
-  --header 'content-type: application/vnd.yang.data+json' \
-  --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}'
-
-curl -k --request PUT \
-  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
-  --header 'accept: application/vnd.yang.data+json' \
-  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
-  --header 'cache-control: no-cache' \
-  --header 'content-type: application/vnd.yang.data+json' \
-  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
-
+configure
 
 echo -e "\nDONE"
 
diff --git a/installers/nat_osm b/installers/nat_osm
index c0aac904..b5a49672 100755
--- a/installers/nat_osm
+++ b/installers/nat_osm
@@ -108,6 +108,8 @@ osmpre==1 && /#End autogeneration by nat_osm/ {
     print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 8000 -j DNAT --to-destination "rift_ip
     print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 4567 -j DNAT --to-destination "rift_ip
     print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 8443 -j DNAT --to-destination "rift_ip
+    print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 8008 -j DNAT --to-destination "rift_ip
+    print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 80 -j DNAT --to-destination "rift_ip
     #print "-A PREROUTING -d "VCA_IP" -p tcp -m tcp --dport 443 -j DNAT --to-destination "juju_ip
     #print "-A PREROUTING -d "VCA_IP" -p tcp -m tcp --dport 17070 -j DNAT --to-destination "juju_ip
     print "#End autogeneration by nat_osm"
@@ -124,6 +126,8 @@ innatpre==1 && /\:INPUT/ {
         print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 8000 -j DNAT --to-destination "rift_ip
         print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 4567 -j DNAT --to-destination "rift_ip
         print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 8443 -j DNAT --to-destination "rift_ip
+        print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 8008 -j DNAT --to-destination "rift_ip
+        print "-A PREROUTING -d "UI_IP" -p tcp -m tcp --dport 80 -j DNAT --to-destination "rift_ip
         #print "-A PREROUTING -d "VCA_IP" -p tcp -m tcp --dport 443 -j DNAT --to-destination "juju_ip
         #print "-A PREROUTING -d "VCA_IP" -p tcp -m tcp --dport 17070 -j DNAT --to-destination "juju_ip
         print "#End autogeneration by nat_osm"