--- /dev/null
+#!/bin/bash
+#######################################################################################
+# Copyright ETSI Contributors and Others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#######################################################################################
+
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+HTTPDDIR="$( cd "${HOME}/snap/qhttp/common" &> /dev/null && pwd )"
+HTTPPORT=11480
+KUBECFG="~/.osm/microk8s-config.yaml"
+NO_CACHE=""
+OPENSTACKRC="/var/snap/microstack/common/etc/microstack.rc"
+REGISTRY="localhost:32000"
+ROOTDIR="$( cd "${DIR}/../../" &> /dev/null && pwd)"
+
+function check_arguments(){
+ while [ $# -gt 0 ] ; do
+ case $1 in
+ --debug) set -x ;;
+ --help | -h) show_help && exit 0 ;;
+ --httpddir) HTTPDIR="$2" && shift;;
+ --install-local-registry) 'install_local_registry' ;;
+ --install-microstack) 'install_microstack' ;;
+ --install-qhttpd) INSTALL_HTTPD='install_qhttpd' ;;
+ --kubecfg) KUBECFG="$2" && shift ;;
+ --module) TARGET_MODULE="$2" && shift;;
+ --no-cache) NO_CACHE="--no-cache" ;;
+ --openstackrc) OPENSTACKRC="$2" && shift ;;
+ --registry) REGISTRY="$2" && shift;;
+ --robot-local-mounts) ROBOT_LOCAL=YES ;;
+ --run-tests) TESTS=YES ;;
+ stage-2) STAGE_2='stage_2 ${TARGET_MODULE}' ;;
+ stage-3) STAGE_3='stage_3 ${TARGET_MODULE}' ;;
+ registry-push) REGISTRY_PUSH='local_registry_push ${TARGET_MODULE}' ;;
+ install-osm) INSTALL_OSM='install_osm' ;;
+ start-robot) START_ROBOT='start_robot' ;;
+ update-install) UPDATE_INSTALL='update_osm_module ${TARGET_MODULE}'
+ REGISTRY_PUSH='local_registry_push ${TARGET_MODULE}' ;;
+ *) echo "Unknown option $1"
+ show_help
+ exit 1;;
+ esac
+ shift
+ done
+}
+
+function show_help() {
+ cat << EOF
+Usage: $0 [OPTIONS]
+Perform a local build and potential installation of OSM from sources, using the
+same process as Jenkins.
+
+OPTIONS:
+ --help display this help message
+ --debug enable set -x for this script
+ --install-local-regitstry install and enable Microk8s local registry on port 32000
+ --install-microstack install Microstack and configure to run robot tests
+ --install-qhttpd install QHTTPD as an HTTP server on port ${HTTPPORT}
+ --kubecfg path to kubecfg.yaml (uses Charmed OSM by default)
+ --no-cache do not use any cache when building docker images
+ --module only build this comma delimited list of modules
+ --openstackrc path to Openstack RC file (uses Microstack by default)
+ --registry use this alternate docker registry
+ --run-tests run stage 2 tests
+ stage-2 run the stage 2 build
+ stage-3 run the stage 3 build
+ registry-push push to the local registry
+ install-osm perform full installation of Charmed OSM from registry
+ start-robot start the Robot test container and leave you at prompt
+ update-install update Charmed OSM with new module container
+EOF
+}
+
+function install_local_registry() {
+ sudo snap install microk8s --classic
+ microk8s status --wait-ready
+ microk8s.enable registry
+}
+
+function install_microstack() {
+ sudo snap install microstack --devmode --edge
+ sudo snap set microstack config.network.ports.dashboard=10080
+ sudo microstack.init --auto --control
+
+ sudo snap alias microstack.openstack openstack
+ . /var/snap/microstack/common/etc/microstack.rc
+
+ for i in $(openstack security group list | awk '/default/{ print $2 }'); do
+ openstack security group rule create $i --protocol icmp --remote-ip 0.0.0.0/0
+ openstack security group rule create $i --protocol tcp --remote-ip 0.0.0.0/0
+ done
+
+ openstack network create --enable --no-share osm-ext
+ openstack subnet create osm-ext-subnet --network osm-ext --dns-nameserver 8.8.8.8 \
+ --subnet-range 172.30.0.0/24
+ openstack router create external-router
+ openstack router add subnet external-router osm-ext-subnet
+ openstack router set --external-gateway external external-router
+
+ curl -L https://github.com/cirros-dev/cirros/releases/download/0.3.5/cirros-0.3.5-x86_64-disk.img \
+ | openstack image create --public --container-format=bare \
+ --disk-format=qcow2 cirros-0.3.5-x86_64-disk.img
+ curl https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img \
+ | openstack image create --public --container-format=bare \
+ --disk-format=qcow2 ubuntu16.04
+ curl https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img \
+ | openstack image create --public --container-format=bare \
+ --disk-format=qcow2 US1604
+ curl https://cloud-images.ubuntu.com/bionic/current/bionic-server-cloudimg-amd64.img \
+ | openstack image create --public --container-format=bare \
+ --disk-format=qcow2 ubuntu18.04
+ curl https://cloud-images.ubuntu.com/focal/current/focal-server-cloudimg-amd64.img \
+ | openstack image create --public --container-format=bare \
+ --disk-format=qcow2 ubuntu20.04
+}
+
+function install_qhttpd() {
+ sudo snap install qhttp
+ EXISTING_PID=$(ps auxw | grep "http.server 11480" | grep -v grep | awk '{print $2}')
+ if [ ! -z $EXISTING_PID ] ; then
+ kill $EXISTING_PID
+ fi
+ qhttp -p ${HTTPPORT} &
+}
+
+function stage_2() {
+ cat << EOF
+=======================================================================================
+Performing Stage 2
+=======================================================================================
+EOF
+ MODULES="common devops IM LCM MON N2VC NBI NG-UI osmclient PLA POL RO tests"
+ if [ ! -z ${1} ] ; then
+ POSSIBLE_MODULES=$(echo ${1} | sed "s/,/ /g")
+ for MODULE in ${POSSIBLE_MODULES}; do
+ if ! echo "${MODULES}" | grep -q "${MODULE}" ; then
+ echo "Unknown stage 2 module ${MODULE}"
+ echo "Must be one of ${MODULES}"
+ exit 1
+ fi
+ done
+ MODULES=${POSSIBLE_MODULES}
+ else
+ cat << EOF
+=======================================================================================
+Cleaning HTTP Directory for full build
+=======================================================================================
+EOF
+ rm -fv ${HTTPDDIR}/*.deb
+ fi
+
+ for MODULE in ${MODULES} ; do
+ cd "${ROOTDIR}"
+ if [ ! -d ${MODULE} ] ; then
+ echo "Directory ${ROOTDIR}/${MODULE} does not exist"
+ exit 1
+ fi
+ cat << EOF
+=======================================================================================
+Building ${MODULE}
+=======================================================================================
+EOF
+ cd ${MODULE}
+ find . -name '*.deb' -exec rm -v {} \;
+ docker build ${NO_CACHE} -t ${MODULE,,}-stage2 .
+
+ STAGES="stage-build.sh"
+ if [ ! -z $TESTS ] ; then
+ STAGES="stage-test.sh ${STAGES}"
+ fi
+ for STAGE in $STAGES ; do
+ docker run -ti \
+ -v "$(pwd):/build" \
+ -w /build \
+ ${MODULE,,}-stage2 \
+ bash -c "groupadd -o -g $(id -g) -r $USER ;
+ useradd -o -u $(id -u) -d /build -r -g $USER $USER ;
+ runuser $USER -c devops-stages/${STAGE}"
+ if [ $? -ne 0 ] ; then
+ cat << EOF
+=======================================================================================
+Failed to build ${MODULE}
+=======================================================================================
+EOF
+ exit 1
+ fi
+ done
+
+ find . -name '*.deb' -exec mv -v {} ${HTTPDDIR}/ \;
+ done
+}
+
+function _find_module_dockerfile() {
+ cd "${ROOTDIR}/devops/docker"
+ MODULES=`find . -name Dockerfile -printf '%h\n' |sed 's|\./||' |sort |tr '\n' ' '`
+ if [ ! -z ${1} ] ; then
+ POSSIBLE_MODULES=$(echo ${1} | sed "s/,/ /g")
+ for MODULE in ${POSSIBLE_MODULES}; do
+ if ! echo "${MODULES}" | grep -q "${MODULE}" ; then
+ echo "Unknown stage 3 module ${MODULE}"
+ echo "Must be one of ${MODULES}"
+ exit 1
+ fi
+ done
+ echo ${POSSIBLE_MODULES}
+ else
+ echo ${MODULES}
+ fi
+}
+
+function stage_3() {
+ cat << EOF
+=======================================================================================
+Performing Stage 3
+=======================================================================================
+EOF
+ MODULES=$(_find_module_dockerfile $1)
+ BUILD_ARGS=""
+ HOSTIP=$(ip -4 addr show docker0 | grep -Po 'inet \K[\d.]+')
+ for file in ~/snap/qhttp/common/*.deb ; do
+ file=`basename ${file}`
+ name=`echo ${file} | cut -d_ -f1 | sed "s/-/_/g"`;
+ name=${name^^}_URL
+ BUILD_ARGS="${BUILD_ARGS}--build-arg ${name}=http://$HOSTIP:${HTTPPORT}/$file "
+ echo Added ${name} as http://$HOSTIP:${HTTPPORT}/$file
+ done
+
+ for MODULE in ${MODULES} ; do
+ cd "${ROOTDIR}/devops/docker"
+ if [ ! -d ${MODULE} ] ; then
+ echo "Directory ${ROOTDIR}/${MODULE} does not exist"
+ exit 1
+ fi
+ cat << EOF
+=======================================================================================
+Building ${MODULE}
+=======================================================================================
+EOF
+ cd ${MODULE}
+ MODULE=${MODULE,,}
+ docker build ${NO_CACHE} -t opensourcemano/${MODULE}:devel ${BUILD_ARGS} .
+ if [ $? -ne 0 ] ; then
+ cat << EOF
+=======================================================================================
+Failed to build ${MODULE}
+=======================================================================================
+EOF
+ exit 1
+ fi
+ done
+}
+
+function local_registry_push() {
+ cat << EOF
+=======================================================================================
+Pushing to local registry
+=======================================================================================
+EOF
+ cd "${ROOTDIR}/devops/docker"
+ MODULES=`find . -name Dockerfile -printf '%h\n' |sed 's|\./||' |sort |tr '\n' ' '`
+ if [ ! -z ${1} ] ; then
+ POSSIBLE_MODULES=$(echo ${1} | sed "s/,/ /g")
+ for MODULE in ${POSSIBLE_MODULES}; do
+ echo "${MODULE}"
+ if ! echo "${MODULES}" | grep -q "${MODULE}" ; then
+ echo "Unknown stage 3 module ${MODULE}"
+ echo "Must be one of ${MODULES}"
+ exit 1
+ fi
+ done
+ MODULES=${POSSIBLE_MODULES}
+ fi
+ for MODULE in ${MODULES} ; do
+ MODULE=${MODULE,,}
+ docker tag opensourcemano/${MODULE}:devel ${REGISTRY}/opensourcemano/${MODULE}:devel
+ docker push ${REGISTRY}/opensourcemano/${MODULE}:devel
+ done
+}
+
+function install_osm() {
+ cd "${ROOTDIR}/devops/installers"
+ VCA=""
+ if juju controllers 2>/dev/null| grep osm-vca ; then
+ VCA="--vca osm-vca"
+ fi
+ ./charmed_install.sh --registry localhost:32000 --tag devel ${VCA}
+}
+
+function start_robot() {
+ mkdir -p "${ROOTDIR}/tests/local"
+ cd "${ROOTDIR}/tests/local"
+
+ . ${OPENSTACKRC}
+
+ # Workaround for microstack auth URL
+ if [ ${OPENSTACKRC} == "/var/snap/microstack/common/etc/microstack.rc" ] ; then
+ export OS_AUTH_URL=${OS_AUTH_URL}/v3
+ fi
+
+ export OSM_HOSTNAME=$(juju config -m osm nbi site_url | sed "s/http.*\?:\/\///"):443
+ export PROMETHEUS_HOSTNAME=$(juju config -m osm prometheus site_url | sed "s/http.*\?:\/\///")
+ export PROMETHEUS_PORT=80
+ export JUJU_PASSWORD=`juju gui 2>&1 | grep password | awk '{print $2}'`
+ export HOSTIP=$(echo $PROMETHEUS_HOSTNAME | sed "s/prometheus.//" | sed "s/.xip.io//")
+
+ rm robot-systest.cfg
+ for line in `env | grep "^OS_" | sort` ; do echo $line >> robot-systest.cfg ; done
+ cat << EOF >> robot-systest.cfg
+VIM_TARGET=osm
+VIM_MGMT_NET=osm-ext
+ENVIRONMENTS_FOLDER=environments
+PACKAGES_FOLDER=/robot-systest/osm-packages
+OS_CLOUD=openstack
+LC_ALL=C.UTF-8
+LANG=C.UTF-8
+EOF
+
+ cat << EOF > robot.etc.hosts
+127.0.0.1 localhost
+${HOSTIP} prometheus.${HOSTIP}.xip.io nbi.${HOSTIP}.xip.io
+EOF
+ cat << EOF > clouds.yaml
+clouds:
+ openstack:
+ auth:
+ auth_url: $OS_AUTH_URL
+ project_name: $OS_PROJECT_NAME
+ username: $OS_USERNAME
+ password: $OS_PASSWORD
+ user_domain_name: $OS_USER_DOMAIN_NAME
+ project_domain_name: $OS_PROJECT_DOMAIN_NAME
+EOF
+
+ VIM_AUTH_URL=$(osm vim-show osm | grep vim_url | awk '{print $4}' | tr -d \")
+ if [ ! -z ${VIM_AUTH_URL} -a "$OS_AUTH_URL" != "${VIM_AUTH_URL}" ] ; then
+ echo "Deleting existing VIM osm as auth URLs have changed"
+ osm vim-delete osm
+ fi
+
+ if ! osm vim-show osm &> /dev/null ; then
+ echo "Creating VIM osm"
+ osm vim-create --name osm --user "$OS_USERNAME" --password "$OS_PASSWORD" \
+ --auth_url "$OS_AUTH_URL" --tenant "$OS_USERNAME" --account_type openstack \
+ --config='{use_floating_ip: True,
+ management_network_name: osm-ext}'
+ fi
+
+ if [ ! -z $ROBOT_LOCAL ] ; then
+ LOCAL_MOUNT_1="/robot-systest/lib"
+ LOCAL_MOUNT_2="/robot-systest/resources"
+ LOCAL_MOUNT_3="/robot-systest/testsuite"
+ else
+ LOCAL_MOUNT_1="/tmp/lib"
+ LOCAL_MOUNT_2="/tmp/resources"
+ LOCAL_MOUNT_3="/tmp/testsuite"
+ fi
+
+ mkdir -p reports
+
+ docker run -ti --entrypoint /bin/bash \
+ --env OSM_HOSTNAME=${OSM_HOSTNAME} \
+ --env PROMETHEUS_HOSTNAME=${PROMETHEUS_HOSTNAME} \
+ --env PROMETHEUS_PORT=${PROMETHEUS_PORT} \
+ --env JUJU_PASSWORD=${JUJU_PASSWORD} \
+ --env HOSTIP=${HOSTIP} \
+ --env-file robot-systest.cfg \
+ -v "$(pwd)/robot.etc.hosts":/etc/hosts \
+ -v ~/.osm/microk8s-config.yaml:/root/.kube/config \
+ -v "$(pwd)/clouds.yaml":/etc/openstack/clouds.yaml \
+ -v "$(pwd)/reports:"/robot-systest/reports \
+ -v "${ROOTDIR}/tests/robot-systest/lib":${LOCAL_MOUNT_1} \
+ -v "${ROOTDIR}/tests/robot-systest/resources":${LOCAL_MOUNT_2} \
+ -v "${ROOTDIR}/tests/robot-systest/testsuite":${LOCAL_MOUNT_3} \
+ opensourcemano/tests:devel
+}
+
+function update_osm_module() {
+ MODULES=$(_find_module_dockerfile $1)
+ for MODULE in ${MODULES} ; do
+ MODULE=${MODULE,,}
+ echo "Updating ${MODULE}"
+ juju attach-resource ${MODULE} image=localhost:32000/opensourcemano/${MODULE}:devel
+ done
+}
+
+if [ "$0" != "$BASH_SOURCE" ]; then
+
+ _osm_local_build()
+ {
+ OPTIONS=$(show_help | sed '0,/^OPTIONS:$/d' | awk '{print $1}')
+ COMPREPLY=($(compgen -W "${OPTIONS}" -- "${COMP_WORDS[-1]}"))
+ }
+
+ THIS_SCRIPT="$(basename ${BASH_SOURCE[0]})"
+ echo "Setting up bash completion for ${THIS_SCRIPT}"
+ complete -F _osm_local_build "${THIS_SCRIPT}"
+else
+ check_arguments $@
+
+ eval "${INSTALL_HTTPD}"
+ eval "${INSTALL_LOCAL_REGISTRY}"
+ eval "${INSTALL_MICROSTACK}"
+ eval "${STAGE_2}"
+ eval "${STAGE_3}"
+ eval "${REGISTRY_PUSH}"
+ eval "${INSTALL_OSM}"
+ eval "${UPDATE_INSTALL}"
+ eval "${START_ROBOT}"
+fi
projects / osm / devops.git / commitdiff