+#!/bin/bash
+# Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+function usage(){
+ echo -e "usage: $0 [OPTIONS]"
+ echo -e "Install OSM from binaries or source code (by default, from binaries)"
+ echo -e " OPTIONS"
+ echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
+ echo -e " --source: install OSM from source code using the latest stable tag"
+ echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag"
+ echo -e " -b master (main dev branch)"
+ echo -e " -b v2.0 (v2.0 branch)"
+ echo -e " -b tags/v1.1.0 (a specific tag)"
+ echo -e " ..."
+ echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
+ echo -e " --nat: install only NAT rules"
+# echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
+ echo -e " --showopts: print chosen options and exit (only for debugging)"
+ echo -e " -y: do not prompt for confirmation, assumes yes"
+ echo -e " -h / --help: print this help"
+}
+
+#Uninstall OSM: remove containers
+function uninstall(){
+ echo -e "\nUninstalling OSM"
+ if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
+ $OSM_DEVOPS/jenkins/host/clean_container RO
+ $OSM_DEVOPS/jenkins/host/clean_container VCA
+ $OSM_DEVOPS/jenkins/host/clean_container SO
+ #$OSM_DEVOPS/jenkins/host/clean_container UI
+ else
+ lxc stop RO && lxc delete RO
+ lxc stop VCA && lxc delete VCA
+ lxc stop SO-ub && lxc delete SO-ub
+ fi
+}
+
+#Configure NAT rules, based on the current IP addresses of containers
+function nat(){
+ echo -e "\nChecking required packages: iptables-persistent"
+ dpkg -l iptables-persistent &>/dev/null || ! echo -e " Not installed.\nInstalling iptables-persistent requires root privileges" || \
+ sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
+ echo -e "\nConfiguring NAT rules"
+ echo -e " Required root privileges"
+ sudo $OSM_DEVOPS/installers/nat_osm
+}
+
+#Update RO, SO and UI:
+function update(){
+ echo -e "\nUpdating components"
+
+ echo -e " Updating RO"
+ CONTAINER="RO"
+ MDG="RO"
+ INSTALL_FOLDER="/opt/openmano"
+ echo -e " Fetching the repo"
+ lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
+ BRANCH=""
+ BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
+ [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
+ CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
+ CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
+ echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
+ # COMMIT_ID either was previously set with -b option, or is an empty string
+ CHECKOUT_ID=$COMMIT_ID
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
+ if [[ $CHECKOUT_ID == "tags/"* ]]; then
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
+ else
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
+ fi
+ echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
+ if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
+ echo " Nothing to be done."
+ else
+ echo " Update required."
+ lxc exec $CONTAINER -- service osm-ro stop
+ lxc exec $CONTAINER -- git -C /opt/openmano stash
+ lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
+ lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
+ lxc exec $CONTAINER -- git -C /opt/openmano stash pop
+ lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
+ lxc exec $CONTAINER -- service osm-ro start
+ fi
+ echo
+
+ echo -e " Updating SO and UI"
+ CONTAINER="SO-ub"
+ MDG="SO"
+ INSTALL_FOLDER="" # To be filled in
+ echo -e " Fetching the repo"
+ lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
+ BRANCH=""
+ BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
+ [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
+ CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
+ CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
+ echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
+ # COMMIT_ID either was previously set with -b option, or is an empty string
+ CHECKOUT_ID=$COMMIT_ID
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
+ if [[ $CHECKOUT_ID == "tags/"* ]]; then
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
+ else
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
+ fi
+ echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
+ if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
+ echo " Nothing to be done."
+ else
+ echo " Update required."
+ # Instructions to be added
+ # lxc exec SO-ub -- ...
+ fi
+ echo
+}
+
+#Configure VCA, SO and RO with the initial configuration:
+# RO -> tenant:osm, logs to be sent to SO
+# VCA -> juju-password
+# SO -> route to Juju Controller, add RO account, add VCA account
+function configure(){
+ #Configure components
+ echo -e "\nConfiguring components"
+ . $OSM_DEVOPS/installers/export_ips
+
+ echo -e " Configuring RO"
+ lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
+ lxc exec RO -- service osm-ro restart
+ time=0; step=2; timelength=20; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
+ lxc exec RO -- openmano tenant-delete -f osm >/dev/null
+ RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
+
+ echo -e " Configuring VCA"
+ JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
+ echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
+ JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
+
+ echo -e " Configuring SO"
+ sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
+ sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
+ lxc exec SO-ub -- nohup sudo -b -H /usr/rift/rift-shell -r -i /usr/rift -a /usr/rift/.artifacts -- ./demos/launchpad.py --use-xml-mode &
+ time=0; step=30; timelength=300; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
+
+ curl -k --request POST \
+ --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
+ --header 'accept: application/vnd.yang.data+json' \
+ --header 'authorization: Basic YWRtaW46YWRtaW4=' \
+ --header 'cache-control: no-cache' \
+ --header 'content-type: application/vnd.yang.data+json' \
+ --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" } } ]}'
+
+ curl -k --request PUT \
+ --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
+ --header 'accept: application/vnd.yang.data+json' \
+ --header 'authorization: Basic YWRtaW46YWRtaW4=' \
+ --header 'cache-control: no-cache' \
+ --header 'content-type: application/vnd.yang.data+json' \
+ --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
+
+}
+
+function install_lxd() {
+ lxd init --auto
+ lxd waitready
+ systemctl stop lxd-bridge
+ systemctl --system daemon-reload
+ systemctl enable lxd-bridge
+ systemctl start lxd-bridge
+}
+
+
+UNINSTALL=""
+DEVELOP=""
+NAT=""
+UPDATE=""
+RECONFIGURE=""
+TEST_INSTALLER=""
+LXD=""
+SHOWOPTS=""
+COMMIT_ID=""
+ASSUME_YES=""
+INSTALL_FROM_SOURCE=""
+
+while getopts ":hy-:b:" o; do
+ case "${o}" in
+ h)
+ usage && exit 0
+ ;;
+ b)
+ COMMIT_ID=${OPTARG}
+ ;;
+ -)
+ [ "${OPTARG}" == "help" ] && usage && exit 0
+ [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
+ [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
+ [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
+ [ "${OPTARG}" == "nat" ] && NAT="y" && continue
+ [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
+ [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
+ [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
+ [ "${OPTARG}" == "lxd" ] && LXD="y" && continue
+ [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
+ echo -e "Invalid option: '--$OPTARG'\n" >&2
+ usage && exit 1
+ ;;
+ \?)
+ echo -e "Invalid option: '-$OPTARG'\n" >&2
+ usage && exit 1
+ ;;
+ y)
+ ASSUME_YES="y"
+ ;;
+ *)
+ usage && exit 1
+ ;;
+ esac
+done
+
+if [ -n "$SHOWOPTS" ]; then
+ echo "DEVELOP=$DEVELOP"
+ echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
+ echo "UNINSTALL=$UNINSTALL"
+ echo "NAT=$NAT"
+ echo "UPDATE=$UPDATE"
+ echo "RECONFIGURE=$RECONFIGURE"
+ echo "TEST_INSTALLER=$TEST_INSTALLER"
+ echo "LXD=$LXD"
+ echo "SHOWOPTS=$SHOWOPTS"
+ echo "Install from specific refspec (-b): $COMMIT_ID"
+ exit 0
+fi
+
+[ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
+[ -n "$COMMIT_ID" ] && INSTALL_FROM_SOURCE="y"
+
+if [ -n "$TEST_INSTALLER" ]; then
+ echo -e "\nUsing local devops repo for OSM installation"
+ TEMPDIR="$(dirname $(realpath $(dirname $0)))"
+else
+ echo -e "\nCreating temporary dir for OSM installation"
+ TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
+ trap 'rm -rf "$TEMPDIR"' EXIT
+fi
+
+echo -e "Checking required packages: git"
+dpkg -l git &>/dev/null || ! echo -e " git not installed.\nInstalling git requires root privileges" || sudo apt-get install -y git
+if [ -z "$TEST_INSTALLER" ]; then
+ echo -e "\nCloning devops repo temporarily"
+ git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
+ RC_CLONE=$?
+fi
+
+echo -e "\nGuessing the current stable release"
+LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | tail -n1`
+[ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
+echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
+[ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
+[ -z "$TEST_INSTALLER" ] && git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
+
+OSM_DEVOPS=$TEMPDIR
+OSM_JENKINS="$TEMPDIR/jenkins"
+. $OSM_JENKINS/common/all_funcs
+
+[ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
+[ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
+[ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
+[ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
+
+#Installation starts here
+echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
+if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
+ read -e -p "The installation will take about 75-90 minutes. Continue (Y/n)?" USER_CONFIRMATION
+ [ -n "$USER_CONFIRMATION" ] && [ "$USER_CONFIRMATION" != "yes" ] && \
+ [ "$USER_CONFIRMATION" != "y" ] && echo "Cancelled!" && exit 0
+fi
+
+echo -e "\nChecking required packages: wget, curl, tar"
+dpkg -l wget curl tar &>/dev/null || ! echo -e " One or several packages are not installed.\nInstalling required packages\n Root privileges are required" || sudo apt-get install -y wget curl tar
+
+echo -e "Checking required packages: lxd"
+lxd --version &>/dev/null || FATAL "lxd not present, exiting."
+[ -n "$LXD" ] && echo -e "\nConfiguring lxd" && install_lxd
+
+wget -q -O- https://osm-download.etsi.org/ftp/osm-2.0-two/README.txt &> /dev/null
+
+if [ -z "$INSTALL_FROM_SOURCE" ]; then
+ echo -e "\nCreating the containers and installing from binaries ..."
+ $OSM_DEVOPS/jenkins/host/install RO || FATAL "RO install failed"
+ $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
+ $OSM_DEVOPS/jenkins/host/install SO || FATAL "SO install failed"
+ $OSM_DEVOPS/jenkins/host/install UI || FATAL "UI install failed"
+else #install from source
+ echo -e "\nCreating the containers and building from source ..."
+ $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
+ $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
+ $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
+ $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
+fi
+
+#Install iptables-persistent and configure NAT rules
+nat
+
+#Configure components
+configure
+
+wget -q -O- https://osm-download.etsi.org/ftp/osm-2.0-two/README2.txt &> /dev/null
+echo -e "\nDONE"