X-Git-Url: https://osm.etsi.org/gitweb/?a=blobdiff_plain;f=scripts%2Fservice-openvim.sh;fp=scripts%2Fservice-openvim.sh;h=0000000000000000000000000000000000000000;hb=9f6571090b203922cabb0382226be0fa48d6e046;hp=7eefa8e1e541047a2afbbd1fc7f054f922f1b481;hpb=ee19576ffab403bf0218974ed96c98dc0375b507;p=osm%2Fopenvim.git

diff --git a/scripts/service-openvim.sh b/scripts/service-openvim.sh
deleted file mode 100755
index 7eefa8e..0000000
--- a/scripts/service-openvim.sh
+++ /dev/null
@@ -1,225 +0,0 @@
-#!/bin/bash
-
-##
-# Copyright 2015 Telefónica Investigación y Desarrollo, S.A.U.
-# This file is part of openvim
-# All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-#
-# For those usages not covered by the Apache License, Version 2.0 please
-# contact with: nfvlabs@tid.es
-##
-
-#launch openvim (and/or floodlight) inside a screen. 
-#or call service if it is installed on systemd
-#It assumes a relative path '..' for openvim 
-#for floodlight, the variable FLOODLIGHT_PATH indicates the installation path
-
-
-DIRNAME=$(readlink -f ${BASH_SOURCE[0]})
-DIRNAME=$(dirname $DIRNAME )
-DIR_OM=$(dirname $DIRNAME )
-#[[ -z $FLOODLIGHT_PATH ]] && FLOODLIGHT_PATH=$(dirname ${DIR_OM})/floodlight-1.1
-#[[ -z $FLOODLIGHT_PATH ]] && FLOODLIGHT_PATH=$(dirname ${DIR_OM})/floodlight-0.90
-
-function usage(){
-    echo -e "Usage: $0 [openvim/vim] [floodlight/flow] start|stop|restart|status"
-    echo -e "  Launch|Removes|Restart|Getstatus openvim (by default) or/and floodlight on a screen/service"
-    echo -e "  For floodlight variable FLOODLIGHT_PATH must indicate installation path"
-    echo -e "    -h --help: shows this help"
-    echo -e "    -n --screen-name NAME : name of screen to launch openvim (default vim)"
-    echo -e "    -- PARAMS use to separate PARAMS that will be send to the service. e.g. -pPORT -PADMINPORT --dbname=DDBB"
-}
-
-function kill_pid(){
-    #send TERM signal and wait 5 seconds and send KILL signal ir still running
-    #PARAMS: $1: PID of process to terminate
-    kill $1 #send TERM signal
-    WAIT=5
-    while [ $WAIT -gt 0 ] && ps -o pid -U $USER -u $USER | grep -q $1
-    do
-        sleep 1
-        WAIT=$((WAIT-1))
-        [ $WAIT -eq 0 ] && echo -n "sending SIGKILL...  " &&  kill -9 $1  #kill when count reach 0
-    done
-    echo "done"
-   
-}
-
-#process options
-source ${DIRNAME}/get-options.sh "screen-name:n= help:h --" $* || exit 1
-
-#help
-[[ -n "$option_help" ]] && usage && exit 0
-
-
-#obtain parameters
-om_list=""
-#om_action="start"  #uncoment to get a default action
-action_list=""
-om_params="$option__"
-
-for param in $params
-do
-    [ "$param" == "start" -o "$param" == "stop"  -o "$param" == "restart" -o "$param" == "status" ] && om_action=$param  && continue
-    [ "$param" == "openvim" -o "$param" == "vim"  ]    && om_list="$om_list vim"              && continue
-    [ "$param" == "openmano" -o "$param" == "mano" ]   && continue #allow and ingore for backwards compatibility
-    [ "$param" == "openflow" -o "$param" == "flow" -o "$param" == "floodlight" ] && om_list="flow $om_list" && continue
-    echo "invalid argument '$param'?  Type -h for help" >&2 && exit 1
-done
-
-[[ -n $option_screen_name ]] && option_screen_name=${option_screen_name#*.} #allow the format 'pid.name' and keep only name
-
-#check action is provided
-[ -z "$om_action" ] && usage >&2 && exit -1
-
-#if no componenets supplied assume all
-[ -z "$om_list" ] && om_list="vim"
-
-function find_process_id(){ #PARAMS:  command screen-name
-    for process_id in `ps -o pid,cmd -U $USER -u $USER | grep -v grep | grep "${1}" | awk '{print $1}'`
-    do
-        scname=$(ps wwep $process_id | grep -o 'STY=\S*')
-        scname=${scname#STY=}
-        [[ -n "$2" ]] && [[ "${scname#*.}" != "$2" ]] && continue
-        echo -n "${process_id} "
-    done
-    echo    
-}
-
-
-for om_component in $om_list
-do
-    screen_name="${om_component}"
-    [[ -n "$option_screen_name" ]] && screen_name=$option_screen_name
-    [ "${om_component}" == "flow" ] && om_cmd="floodlight.jar" && om_name="floodlight" && om_dir=$FLOODLIGHT_PATH
-    [ "${om_component}" == "vim" ]  && om_cmd="./openvimd.py"  && om_name="openvim   " && om_dir=${DIR_OM}
-    #obtain PID of program
-    component_id=`find_process_id "${om_cmd}" $option_screen_name`
-    processes=$(echo $component_id | wc -w)
-
-    #status
-    if [ "$om_action" == "status" ]
-    then
-    	running=""
-        for process_id in $component_id 
-        do
-            scname=$(ps wwep $process_id | grep -o 'STY=\S*')
-            scname=${scname#STY=}
-            [[ -n "$option_screen_name" ]] && [[ "${scname#*.}" != "$option_screen_name" ]] && continue
-            printf "%-15s" "pid: ${process_id},"
-            [[ -n "$scname" ]] && printf "%-25s" "screen: ${scname},"
-            echo cmd: $(ps -o cmd p $process_id | tail -n1 )
-            running=y
-        done
-        #if installed as a service and it is not provided a screen name call service
-        [[ -f /etc/systemd/system/openvim.service ]] && [[ -z $option_screen_name ]] && running=y #&& service openvim status
-        if [ -z "$running" ]
-        then
-            echo -n "    $om_name not running" && [[ -n "$option_screen_name" ]] && echo " on screen '$option_screen_name'" || echo
-        fi
-    fi
-
-    #if installed as a service and it is not provided a screen name call service
-    [[ -f /etc/systemd/system/openvim.service ]] && [[ -z $option_screen_name ]] && service openvim $om_action && ( [[ $om_action == status ]] || sleep 5 ) && exit $?
-
-    #stop
-    if [ "$om_action" == "stop" -o "$om_action" == "restart" ]
-    then
-        #terminates program
-        [ $processes -gt 1 ] && echo "$processes processes are running, specify with --screen-name" && continue  
-        [ $processes -eq 1 ] && echo -n "    stopping $om_name ... " && kill_pid $component_id 
-        component_id=""
-        #terminates screen
-        if screen -wipe | grep -q -e "\.${screen_name}\b"
-        then
-            screen -S $screen_name -p 0 -X stuff "exit\n" || echo
-            sleep 1
-        fi
-    fi
-
-    #start
-    if [ "$om_action" == "start" -o "$om_action" == "restart" ]
-    then
-        [[ -z $FLOODLIGHT_PATH ]] && [[ $om_component == flow ]] && 
-            echo "FLOODLIGHT_PATH shell variable must indicate floodlight installation path" >&2 && exit -1
-        #calculates log file name
-        logfile=""
-        mkdir -p $DIR_OM/logs && logfile=$DIR_OM/logs/open${screen_name}.log || echo "can not create logs directory  $DIR_OM/logs"
-        #check already running
-        [ -n "$component_id" ] && echo "    $om_name is already running. Skipping" && continue
-        #create screen if not created
-        echo -n "    starting $om_name ... "
-        if ! screen -wipe | grep -q -e "\.${screen_name}\b"
-        then
-            pushd ${om_dir} > /dev/null
-            screen -dmS ${screen_name}  bash
-            sleep 1
-            popd > /dev/null
-        else
-            echo -n " using existing screen '${screen_name}' ... "
-            screen -S ${screen_name} -p 0 -X log off
-            screen -S ${screen_name} -p 0 -X stuff "cd ${om_dir}\n"
-            sleep 1
-        fi
-        #move old log file index one number up and log again in index 0
-        if [[ -n $logfile ]]
-        then
-            for index in 8 7 6 5 4 3 2 1
-            do
-                [[ -f ${logfile}.${index} ]] && mv ${logfile}.${index} ${logfile}.$((index+1))
-            done
-            [[ -f ${logfile} ]] && mv ${logfile} ${logfile}.1
-            screen -S ${screen_name} -p 0 -X logfile ${logfile}
-            screen -S ${screen_name} -p 0 -X log on
-        fi
-        #launch command to screen
-        #[ "${om_component}" != "flow" ] && screen -S ${screen_name} -p 0 -X stuff "cd ${DIR_OM}/open${om_component}\n" && sleep 1
-        [ "${om_component}" == "flow" ] && screen -S ${screen_name} -p 0 -X stuff "java  -Dlogback.configurationFile=${DIRNAME}/flow-logback.xml -jar ./target/floodlight.jar -cf ${DIRNAME}/flow.properties_v0.9\n"
-        #[ "${om_component}" == "flow" ] && screen -S ${screen_name} -p 0 -X stuff "java  -Dlogback.configurationFile=${DIRNAME}/flow-logback.xml -jar ./target/floodlight.jar -cf ${DIRNAME}/flow.properties_v1.1\n" && sleep 5
-        [ "${om_component}" != "flow" ] && screen -S ${screen_name} -p 0 -X stuff "${om_cmd}${om_params}\n"
-        #check if is running
-        [[ -n $logfile ]] && timeout=120 #2 minute
-        [[ -z $logfile ]] && timeout=20
-        while [[ $timeout -gt 0 ]]
-        do
-           #check if is running
-           #echo timeout $timeout
-           #if !  ps -f -U $USER -u $USER | grep -v grep | grep -q ${om_cmd}
-           log_lines=0
-           [[ -n $logfile ]] && log_lines=`head ${logfile} | wc -l`
-           component_id=`find_process_id "${om_cmd}${om_params}" $screen_name`
-           if [[ -z $component_id ]]
-           then #process not started or finished
-               [[ $log_lines -ge 2 ]] &&  echo -n "ERROR, it has exited." && break
-               #started because writted serveral lines at log so report error
-           fi
-           [[ -n $logfile ]] && [[ ${om_component} == flow ]] && grep -q "Listening for switch connections" ${logfile} && sleep 1 && break
-           [[ -n $logfile ]] && [[ ${om_component} != flow ]] && grep -q "open${om_component}d ready" ${logfile} && break
-           sleep 1
-           timeout=$((timeout -1))
-        done
-        if [[ -n $logfile ]] && [[ $timeout == 0 ]] 
-        then 
-           echo -n "timeout!"
-        else
-           echo -n "running on 'screen -x ${screen_name}'."
-        fi
-        [[ -n $logfile ]] && echo "  Logging at '${logfile}'" || echo
-    fi
-done
-
-
-
-