X-Git-Url: https://osm.etsi.org/gitweb/?a=blobdiff_plain;f=rwlaunchpad%2Fplugins%2Frwimagemgr%2Fetc%2Fub16%2Fglance-api.conf;fp=rwlaunchpad%2Fplugins%2Frwimagemgr%2Fetc%2Fub16%2Fglance-api.conf;h=65e2e8d9eaea7a273f12d29f667edea7060c1321;hb=6f07e6f33f751ab4ffe624f6037f887b243bece2;hp=0000000000000000000000000000000000000000;hpb=72a563886272088feb7cb52e4aafbe6d2c580ff9;p=osm%2FSO.git diff --git a/rwlaunchpad/plugins/rwimagemgr/etc/ub16/glance-api.conf b/rwlaunchpad/plugins/rwimagemgr/etc/ub16/glance-api.conf new file mode 100644 index 00000000..65e2e8d9 --- /dev/null +++ b/rwlaunchpad/plugins/rwimagemgr/etc/ub16/glance-api.conf @@ -0,0 +1,1783 @@ +# Copyright 2016 RIFT.IO Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +[DEFAULT] + +# +# From glance.api +# + +# When true, this option sets the owner of an image to be the tenant. +# Otherwise, the owner of the image will be the authenticated user +# issuing the request. (boolean value) +#owner_is_tenant = true + +# Role used to identify an authenticated user as administrator. +# (string value) +#admin_role = admin + +# Allow unauthenticated users to access the API with read-only +# privileges. This only applies when using ContextMiddleware. (boolean +# value) +allow_anonymous_access = True + +# Limits request ID length. (integer value) +#max_request_id_length = 64 + +# Public url to use for versions endpoint. The default is None, which +# will use the request's host_url attribute to populate the URL base. +# If Glance is operating behind a proxy, you will want to change this +# to represent the proxy's URL. (string value) +#public_endpoint = + +# Whether to allow users to specify image properties beyond what the +# image schema provides (boolean value) +#allow_additional_image_properties = true + +# Maximum number of image members per image. Negative values evaluate +# to unlimited. (integer value) +#image_member_quota = 128 + +# Maximum number of properties allowed on an image. Negative values +# evaluate to unlimited. (integer value) +#image_property_quota = 128 + +# Maximum number of tags allowed on an image. Negative values evaluate +# to unlimited. (integer value) +#image_tag_quota = 128 + +# Maximum number of locations allowed on an image. Negative values +# evaluate to unlimited. (integer value) +#image_location_quota = 10 + +# Python module path of data access API (string value) +data_api = glance.db.sqlalchemy.api + +# Default value for the number of items returned by a request if not +# specified explicitly in the request (integer value) +#limit_param_default = 25 + +# Maximum permissible number of items that could be returned by a +# request (integer value) +#api_limit_max = 1000 + +# Whether to include the backend image storage location in image +# properties. Revealing storage location can be a security risk, so +# use this setting with caution! (boolean value) +#show_image_direct_url = false + +# Whether to include the backend image locations in image properties. +# For example, if using the file system store a URL of +# "file:///path/to/image" will be returned to the user in the +# 'direct_url' meta-data field. Revealing storage location can be a +# security risk, so use this setting with caution! Setting this to +# true overrides the show_image_direct_url option. (boolean value) +#show_multiple_locations = false + +# Maximum size of image a user can upload in bytes. Defaults to +# 1099511627776 bytes (1 TB).WARNING: this value should only be +# increased after careful consideration and must be set to a value +# under 8 EB (9223372036854775808). (integer value) +# Maximum value: 9223372036854775808 +#image_size_cap = 1099511627776 + +# Set a system wide quota for every user. This value is the total +# capacity that a user can use across all storage systems. A value of +# 0 means unlimited.Optional unit can be specified for the value. +# Accepted units are B, KB, MB, GB and TB representing Bytes, +# KiloBytes, MegaBytes, GigaBytes and TeraBytes respectively. If no +# unit is specified then Bytes is assumed. Note that there should not +# be any space between value and unit and units are case sensitive. +# (string value) +#user_storage_quota = 0 + +# Deploy the v1 OpenStack Images API. (boolean value) +enable_v1_api = true + +# Deploy the v2 OpenStack Images API. (boolean value) +enable_v2_api = true + +# Deploy the v1 OpenStack Registry API. (boolean value) +enable_v1_registry = true + +# Deploy the v2 OpenStack Registry API. (boolean value) +enable_v2_registry = true + +# The hostname/IP of the pydev process listening for debug connections +# (string value) +#pydev_worker_debug_host = + +# The port on which a pydev process is listening for connections. +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +#pydev_worker_debug_port = 5678 + +# AES key for encrypting store 'location' metadata. This includes, if +# used, Swift or S3 credentials. Should be set to a random string of +# length 16, 24 or 32 bytes (string value) +#metadata_encryption_key = + +# Digest algorithm which will be used for digital signature. Use the +# command "openssl list-message-digest-algorithms" to get the +# available algorithms supported by the version of OpenSSL on the +# platform. Examples are "sha1", "sha256", "sha512", etc. (string +# value) +#digest_algorithm = sha256 + +# This value sets what strategy will be used to determine the image +# location order. Currently two strategies are packaged with Glance +# 'location_order' and 'store_type'. (string value) +# Allowed values: location_order, store_type +#location_strategy = location_order + +# The location of the property protection file.This file contains the +# rules for property protections and the roles/policies associated +# with it. If this config value is not specified, by default, property +# protections won't be enforced. If a value is specified and the file +# is not found, then the glance-api service will not start. (string +# value) +#property_protection_file = + +# This config value indicates whether "roles" or "policies" are used +# in the property protection file. (string value) +# Allowed values: roles, policies +#property_protection_rule_format = roles + +# Modules of exceptions that are permitted to be recreated upon +# receiving exception data from an rpc call. (list value) +#allowed_rpc_exception_modules = glance.common.exception,builtins,exceptions + +# Address to bind the server. Useful when selecting a particular +# network interface. (string value) +bind_host = 0.0.0.0 + +# The port on which the server will listen. (port value) +# Minimum value: 0 +# Maximum value: 65535 +bind_port = 9292 + +# The number of child process workers that will be created to service +# requests. The default will be equal to the number of CPUs available. +# (integer value) +workers = 1 + +# Maximum line size of message headers to be accepted. max_header_line +# may need to be increased when using large tokens (typically those +# generated by the Keystone v3 API with big service catalogs (integer +# value) +#max_header_line = 16384 + +# If False, server will return the header "Connection: close", If +# True, server will return "Connection: Keep-Alive" in its responses. +# In order to close the client socket connection explicitly after the +# response is sent and read successfully by the client, you simply +# have to set this option to False when you create a wsgi server. +# (boolean value) +#http_keepalive = true + +# Timeout for client connections' socket operations. If an incoming +# connection is idle for this number of seconds it will be closed. A +# value of '0' means wait forever. (integer value) +#client_socket_timeout = 900 + +# The backlog value that will be used when creating the TCP listener +# socket. (integer value) +#backlog = 4096 + +# The value for the socket option TCP_KEEPIDLE. This is the time in +# seconds that the connection must be idle before TCP starts sending +# keepalive probes. (integer value) +#tcp_keepidle = 600 + +# CA certificate file to use to verify connecting clients. (string +# value) +#ca_file = + +# Certificate file to use when starting API server securely. (string +# value) +#cert_file = + +# Private key file to use when starting API server securely. (string +# value) +#key_file = + +# The path to the sqlite file database that will be used for image +# cache management. (string value) +#image_cache_sqlite_db = cache.db + +# The driver to use for image cache management. (string value) +#image_cache_driver = sqlite + +# The upper limit (the maximum size of accumulated cache in bytes) +# beyond which the cache pruner, if running, starts cleaning the image +# cache. (integer value) +#image_cache_max_size = 10737418240 + +# The amount of time to let an incomplete image remain in the cache, +# before the cache cleaner, if running, will remove the incomplete +# image. (integer value) +#image_cache_stall_time = 86400 + +# Base directory that the image cache uses. (string value) +image_cache_dir = {RIFT_VAR_ROOT}/glance/image-cache/ + +# Default publisher_id for outgoing notifications. (string value) +#default_publisher_id = image.localhost + +# List of disabled notifications. A notification can be given either +# as a notification type to disable a single event, or as a +# notification group prefix to disable all events within a group. +# Example: if this config option is set to ["image.create", +# "metadef_namespace"], then "image.create" notification will not be +# sent after image is created and none of the notifications for +# metadefinition namespaces will be sent. (list value) +#disabled_notifications = + +# Address to find the registry server. (string value) +registry_host = 0.0.0.0 + +# Port the registry server is listening on. (port value) +# Minimum value: 0 +# Maximum value: 65535 +registry_port = 9191 + +# Whether to pass through the user token when making requests to the +# registry. To prevent failures with token expiration during big files +# upload, it is recommended to set this parameter to False.If +# "use_user_token" is not in effect, then admin credentials can be +# specified. (boolean value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#use_user_token = true + +# The administrators user name. If "use_user_token" is not in effect, +# then admin credentials can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#admin_user = + +# The administrators password. If "use_user_token" is not in effect, +# then admin credentials can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#admin_password = + +# The tenant name of the administrative user. If "use_user_token" is +# not in effect, then admin tenant name can be specified. (string +# value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#admin_tenant_name = + +# The URL to the keystone service. If "use_user_token" is not in +# effect and using keystone auth, then URL of keystone can be +# specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#auth_url = + +# The strategy to use for authentication. If "use_user_token" is not +# in effect, then auth strategy can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#auth_strategy = noauth + +# The region for the authentication service. If "use_user_token" is +# not in effect and using keystone auth, then region name can be +# specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated +# in M release. It will be removed in O release. For more information +# read OSSN-0060. Related functionality with uploading big images has +# been implemented with Keystone trusts support. +#auth_region = + +# The protocol to use for communication with the registry server. +# Either http or https. (string value) +#registry_client_protocol = http + +# The path to the key file to use in SSL connections to the registry +# server, if any. Alternately, you may set the GLANCE_CLIENT_KEY_FILE +# environment variable to a filepath of the key file (string value) +#registry_client_key_file = + +# The path to the cert file to use in SSL connections to the registry +# server, if any. Alternately, you may set the GLANCE_CLIENT_CERT_FILE +# environment variable to a filepath of the CA cert file (string +# value) +#registry_client_cert_file = + +# The path to the certifying authority cert file to use in SSL +# connections to the registry server, if any. Alternately, you may set +# the GLANCE_CLIENT_CA_FILE environment variable to a filepath of the +# CA cert file. (string value) +#registry_client_ca_file = + +# When using SSL in connections to the registry server, do not require +# validation via a certifying authority. This is the registry's +# equivalent of specifying --insecure on the command line using +# glanceclient for the API. (boolean value) +#registry_client_insecure = false + +# The period of time, in seconds, that the API server will wait for a +# registry request to complete. A value of 0 implies no timeout. +# (integer value) +#registry_client_timeout = 600 + +# Whether to pass through headers containing user and tenant +# information when making requests to the registry. This allows the +# registry to use the context middleware without keystonemiddleware's +# auth_token middleware, removing calls to the keystone auth service. +# It is recommended that when using this option, secure communication +# between glance api and glance registry is ensured by means other +# than auth_token middleware. (boolean value) +#send_identity_headers = false + +# The amount of time in seconds to delay before performing a delete. +# (integer value) +#scrub_time = 0 + +# The size of thread pool to be used for scrubbing images. The default +# is one, which signifies serial scrubbing. Any value above one +# indicates the max number of images that may be scrubbed in parallel. +# (integer value) +#scrub_pool_size = 1 + +# Turn on/off delayed delete. (boolean value) +#delayed_delete = false + +# +# From oslo.log +# + +# If set to true, the logging level will be set to DEBUG instead of +# the default INFO level. (boolean value) +debug = True + +# If set to false, the logging level will be set to WARNING instead of +# the default INFO level. (boolean value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +verbose = True + +# The name of a logging configuration file. This file is appended to +# any existing logging configuration files. For details about logging +# configuration files, see the Python logging module documentation. +# Note that when logging configuration files are used then all logging +# configuration is set in the configuration file and other logging +# configuration options are ignored (for example, +# logging_context_format_string). (string value) +# Deprecated group/name - [DEFAULT]/log_config +#log_config_append = + +# Defines the format string for %%(asctime)s in log records. Default: +# %(default)s . This option is ignored if log_config_append is set. +# (string value) +#log_date_format = %Y-%m-%d %H:%M:%S + +# (Optional) Name of log file to send logging output to. If no default +# is set, logging will go to stderr as defined by use_stderr. This +# option is ignored if log_config_append is set. (string value) +# Deprecated group/name - [DEFAULT]/logfile +log_file = {RIFT_VAR_ROOT}/log/glance/glance-api.log + +# (Optional) The base directory used for relative log_file paths. +# This option is ignored if log_config_append is set. (string value) +# Deprecated group/name - [DEFAULT]/logdir +#log_dir = + +# Uses logging handler designed to watch file system. When log file is +# moved or removed this handler will open a new log file with +# specified path instantaneously. It makes sense only if log_file +# option is specified and Linux platform is used. This option is +# ignored if log_config_append is set. (boolean value) +#watch_log_file = false + +# Use syslog for logging. Existing syslog format is DEPRECATED and +# will be changed later to honor RFC5424. This option is ignored if +# log_config_append is set. (boolean value) +#use_syslog = false + +# Syslog facility to receive log lines. This option is ignored if +# log_config_append is set. (string value) +#syslog_log_facility = LOG_USER + +# Log output to standard error. This option is ignored if +# log_config_append is set. (boolean value) +#use_stderr = true + +# Format string to use for log messages with context. (string value) +#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s + +# Format string to use for log messages when context is undefined. +# (string value) +#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s + +# Additional data to append to log message when logging level for the +# message is DEBUG. (string value) +#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d + +# Prefix each line of exception output with this format. (string +# value) +#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s + +# Defines the format string for %(user_identity)s that is used in +# logging_context_format_string. (string value) +#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s + +# List of package logging levels in logger=LEVEL pairs. This option is +# ignored if log_config_append is set. (list value) +#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO + +# Enables or disables publication of error events. (boolean value) +#publish_errors = false + +# The format for an instance that is passed with the log message. +# (string value) +#instance_format = "[instance: %(uuid)s] " + +# The format for an instance UUID that is passed with the log message. +# (string value) +#instance_uuid_format = "[instance: %(uuid)s] " + +# Enables or disables fatal status of deprecations. (boolean value) +#fatal_deprecations = false + +# +# From oslo.messaging +# + +# Size of RPC connection pool. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size +#rpc_conn_pool_size = 30 + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet +# interface, or IP. The "host" option should point or resolve to this +# address. (string value) +#rpc_zmq_bind_address = * + +# MatchMaker driver. (string value) +# Allowed values: redis, dummy +#rpc_zmq_matchmaker = redis + +# Type of concurrency used. Either "native" or "eventlet" (string +# value) +#rpc_zmq_concurrency = eventlet + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +#rpc_zmq_contexts = 1 + +# Maximum number of ingress messages to locally buffer per topic. +# Default is unlimited. (integer value) +#rpc_zmq_topic_backlog = + +# Directory for holding IPC sockets. (string value) +#rpc_zmq_ipc_dir = /var/run/openstack + +# Name of this node. Must be a valid hostname, FQDN, or IP address. +# Must match "host" option, if running Nova. (string value) +#rpc_zmq_host = localhost + +# Seconds to wait before a cast expires (TTL). The default value of -1 +# specifies an infinite linger period. The value of 0 specifies no +# linger period. Pending messages shall be discarded immediately when +# the socket is closed. Only supported by impl_zmq. (integer value) +#rpc_cast_timeout = -1 + +# The default number of seconds that poll should wait. Poll raises +# timeout exception when timeout expired. (integer value) +#rpc_poll_timeout = 1 + +# Expiration timeout in seconds of a name service record about +# existing target ( < 0 means no timeout). (integer value) +#zmq_target_expire = 120 + +# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. +# (boolean value) +#use_pub_sub = true + +# Minimal port number for random ports range. (port value) +# Minimum value: 0 +# Maximum value: 65535 +#rpc_zmq_min_port = 49152 + +# Maximal port number for random ports range. (integer value) +# Minimum value: 1 +# Maximum value: 65536 +#rpc_zmq_max_port = 65536 + +# Number of retries to find free port number before fail with +# ZMQBindError. (integer value) +#rpc_zmq_bind_port_retries = 100 + +# Size of executor thread pool. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size +#executor_thread_pool_size = 64 + +# Seconds to wait for a response from a call. (integer value) +#rpc_response_timeout = 60 + +# A URL representing the messaging driver to use and its full +# configuration. If not set, we fall back to the rpc_backend option +# and driver specific configuration. (string value) +#transport_url = + +# The messaging driver to use, defaults to rabbit. Other drivers +# include amqp and zmq. (string value) +#rpc_backend = rabbit + +# The default exchange under which topics are scoped. May be +# overridden by an exchange name specified in the transport_url +# option. (string value) +#control_exchange = openstack + + +[cors] + +# +# From oslo.middleware.cors +# + +# Indicate whether this resource may be shared with the domain +# received in the requests "origin" header. (list value) +#allowed_origin = + +# Indicate that the actual request can include user credentials +# (boolean value) +#allow_credentials = true + +# Indicate which headers are safe to expose to the API. Defaults to +# HTTP Simple Headers. (list value) +#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID + +# Maximum cache age of CORS preflight requests. (integer value) +#max_age = 3600 + +# Indicate which methods can be used during the actual request. (list +# value) +#allow_methods = GET,PUT,POST,DELETE,PATCH + +# Indicate which header field names may be used during the actual +# request. (list value) +#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID + + +[cors.subdomain] + +# +# From oslo.middleware.cors +# + +# Indicate whether this resource may be shared with the domain +# received in the requests "origin" header. (list value) +#allowed_origin = + +# Indicate that the actual request can include user credentials +# (boolean value) +#allow_credentials = true + +# Indicate which headers are safe to expose to the API. Defaults to +# HTTP Simple Headers. (list value) +#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID + +# Maximum cache age of CORS preflight requests. (integer value) +#max_age = 3600 + +# Indicate which methods can be used during the actual request. (list +# value) +#allow_methods = GET,PUT,POST,DELETE,PATCH + +# Indicate which header field names may be used during the actual +# request. (list value) +#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID + + +[database] + +# +# From oslo.db +# + +# The file name to use with SQLite. (string value) +# Deprecated group/name - [DEFAULT]/sqlite_db +sqlite_db = {RIFT_VAR_ROOT}/glance/glance-api.db + +# If True, SQLite uses synchronous mode. (boolean value) +# Deprecated group/name - [DEFAULT]/sqlite_synchronous +#sqlite_synchronous = true + +# The back end to use for the database. (string value) +# Deprecated group/name - [DEFAULT]/db_backend +backend = sqlalchemy + +# The SQLAlchemy connection string to use to connect to the database. +# (string value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +#connection = + +# The SQLAlchemy connection string to use to connect to the slave +# database. (string value) +#slave_connection = + +# The SQL mode to be used for MySQL sessions. This option, including +# the default, overrides any server-set SQL mode. To use whatever SQL +# mode is set by the server configuration, set this to no value. +# Example: mysql_sql_mode= (string value) +#mysql_sql_mode = TRADITIONAL + +# Timeout before idle SQL connections are reaped. (integer value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +idle_timeout = 3600 + +# Minimum number of SQL connections to keep open in a pool. (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +#min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool. (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +#max_pool_size = + +# Maximum number of database connection retries during startup. Set to +# -1 to specify an infinite retry count. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +#max_retries = 10 + +# Interval between retries of opening a SQL connection. (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +#retry_interval = 10 + +# If set, use this value for max_overflow with SQLAlchemy. (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +#max_overflow = 50 + +# Verbosity of SQL debugging information: 0=None, 100=Everything. +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_connection_debug +#connection_debug = 0 + +# Add Python stack traces to SQL as comment strings. (boolean value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +#connection_trace = false + +# If set, use this value for pool_timeout with SQLAlchemy. (integer +# value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +#pool_timeout = + +# Enable the experimental use of database reconnect on connection +# lost. (boolean value) +#use_db_reconnect = false + +# Seconds between retries of a database transaction. (integer value) +#db_retry_interval = 1 + +# If True, increases the interval between retries of a database +# operation up to db_max_retry_interval. (boolean value) +#db_inc_retry_interval = true + +# If db_inc_retry_interval is set, the maximum seconds between retries +# of a database operation. (integer value) +#db_max_retry_interval = 10 + +# Maximum retries in case of connection error or deadlock error before +# error is raised. Set to -1 to specify an infinite retry count. +# (integer value) +#db_max_retries = 20 + +# +# From oslo.db.concurrency +# + +# Enable the experimental use of thread pooling for all DB API calls +# (boolean value) +# Deprecated group/name - [DEFAULT]/dbapi_use_tpool +#use_tpool = false + + +[glance_store] + +# +# From glance.store +# + +# List of stores enabled. Valid stores are: cinder, file, http, rbd, +# sheepdog, swift, s3, vsphere (list value) +stores = file,http + +# Default scheme to use to store image data. The scheme must be +# registered by one of the stores defined by the 'stores' config +# option. (string value) +default_store = file + +# Minimum interval seconds to execute updating dynamic storage +# capabilities based on backend status then. It's not a periodic +# routine, the update logic will be executed only when interval +# seconds elapsed and an operation of store has triggered. The feature +# will be enabled only when the option value greater then zero. +# (integer value) +#store_capabilities_update_min_interval = 0 + +# Specify the path to the CA bundle file to use in verifying the +# remote server certificate. (string value) +#https_ca_certificates_file = + +# If true, the remote server certificate is not verified. If false, +# then the default CA truststore is used for verification. This option +# is ignored if "https_ca_certificates_file" is set. (boolean value) +#https_insecure = true + +# Specify the http/https proxy information that should be used to +# connect to the remote server. The proxy information should be a key +# value pair of the scheme and proxy. e.g. http:10.0.0.1:3128. You can +# specify proxies for multiple schemes by seperating the key value +# pairs with a comma.e.g. http:10.0.0.1:3128, https:10.0.0.1:1080. +# (dict value) +#http_proxy_information = + +# If True, swiftclient won't check for a valid SSL certificate when +# authenticating. (boolean value) +#swift_store_auth_insecure = false + +# A string giving the CA certificate file to use in SSL connections +# for verifying certs. (string value) +#swift_store_cacert = + +# The region of the swift endpoint to be used for single tenant. This +# setting is only necessary if the tenant has multiple swift +# endpoints. (string value) +#swift_store_region = + +# If set, the configured endpoint will be used. If None, the storage +# url from the auth response will be used. (string value) +#swift_store_endpoint = + +# A string giving the endpoint type of the swift service to use +# (publicURL, adminURL or internalURL). This setting is only used if +# swift_store_auth_version is 2. (string value) +#swift_store_endpoint_type = publicURL + +# A string giving the service type of the swift service to use. This +# setting is only used if swift_store_auth_version is 2. (string +# value) +#swift_store_service_type = object-store + +# Container within the account that the account should use for storing +# images in Swift when using single container mode. In multiple +# container mode, this will be the prefix for all containers. (string +# value) +#swift_store_container = glance + +# The size, in MB, that Glance will start chunking image files and do +# a large object manifest in Swift. (integer value) +#swift_store_large_object_size = 5120 + +# The amount of data written to a temporary disk buffer during the +# process of chunking the image file. (integer value) +#swift_store_large_object_chunk_size = 200 + +# A boolean value that determines if we create the container if it +# does not exist. (boolean value) +#swift_store_create_container_on_put = false + +# If set to True, enables multi-tenant storage mode which causes +# Glance images to be stored in tenant specific Swift accounts. +# (boolean value) +#swift_store_multi_tenant = false + +# When set to 0, a single-tenant store will only use one container to +# store all images. When set to an integer value between 1 and 32, a +# single-tenant store will use multiple containers to store images, +# and this value will determine how many containers are created.Used +# only when swift_store_multi_tenant is disabled. The total number of +# containers that will be used is equal to 16^N, so if this config +# option is set to 2, then 16^2=256 containers will be used to store +# images. (integer value) +#swift_store_multiple_containers_seed = 0 + +# A list of tenants that will be granted read/write access on all +# Swift containers created by Glance in multi-tenant mode. (list +# value) +#swift_store_admin_tenants = + +# If set to False, disables SSL layer compression of https swift +# requests. Setting to False may improve performance for images which +# are already in a compressed format, eg qcow2. (boolean value) +#swift_store_ssl_compression = true + +# The number of times a Swift download will be retried before the +# request fails. (integer value) +#swift_store_retry_get_count = 0 + +# The period of time (in seconds) before token expirationwhen +# glance_store will try to reques new user token. Default value 60 sec +# means that if token is going to expire in 1 min then glance_store +# request new user token. (integer value) +#swift_store_expire_soon_interval = 60 + +# If set to True create a trust for each add/get request to Multi- +# tenant store in order to prevent authentication token to be expired +# during uploading/downloading data. If set to False then user token +# is used for Swift connection (so no overhead on trust creation). +# Please note that this option is considered only and only if +# swift_store_multi_tenant=True (boolean value) +#swift_store_use_trusts = true + +# The reference to the default swift account/backing store parameters +# to use for adding new images. (string value) +#default_swift_reference = ref1 + +# Version of the authentication service to use. Valid versions are 2 +# and 3 for keystone and 1 (deprecated) for swauth and rackspace. +# (deprecated - use "auth_version" in swift_store_config_file) (string +# value) +#swift_store_auth_version = 2 + +# The address where the Swift authentication service is listening. +# (deprecated - use "auth_address" in swift_store_config_file) (string +# value) +#swift_store_auth_address = + +# The user to authenticate against the Swift authentication service +# (deprecated - use "user" in swift_store_config_file) (string value) +#swift_store_user = + +# Auth key for the user authenticating against the Swift +# authentication service. (deprecated - use "key" in +# swift_store_config_file) (string value) +#swift_store_key = + +# The config file that has the swift account(s)configs. (string value) +#swift_store_config_file = + +# RADOS images will be chunked into objects of this size (in +# megabytes). For best performance, this should be a power of two. +# (integer value) +#rbd_store_chunk_size = 8 + +# RADOS pool in which images are stored. (string value) +#rbd_store_pool = images + +# RADOS user to authenticate as (only applicable if using Cephx. If +# , a default will be chosen based on the client. section in +# rbd_store_ceph_conf) (string value) +#rbd_store_user = + +# Ceph configuration file path. If , librados will locate the +# default config. If using cephx authentication, this file should +# include a reference to the right keyring in a client. section +# (string value) +#rbd_store_ceph_conf = /etc/ceph/ceph.conf + +# Timeout value (in seconds) used when connecting to ceph cluster. If +# value <= 0, no timeout is set and default librados value is used. +# (integer value) +#rados_connect_timeout = 0 + +# Info to match when looking for cinder in the service catalog. Format +# is : separated values of the form: +# :: (string value) +#cinder_catalog_info = volumev2::publicURL + +# Override service catalog lookup with template for cinder endpoint +# e.g. http://localhost:8776/v2/%(tenant)s (string value) +#cinder_endpoint_template = + +# Region name of this node. If specified, it will be used to locate +# OpenStack services for stores. (string value) +# Deprecated group/name - [DEFAULT]/os_region_name +#cinder_os_region_name = + +# Location of ca certicates file to use for cinder client requests. +# (string value) +#cinder_ca_certificates_file = + +# Number of cinderclient retries on failed http calls (integer value) +#cinder_http_retries = 3 + +# Time period of time in seconds to wait for a cinder volume +# transition to complete. (integer value) +#cinder_state_transition_timeout = 300 + +# Allow to perform insecure SSL requests to cinder (boolean value) +#cinder_api_insecure = false + +# The address where the Cinder authentication service is listening. If +# , the cinder endpoint in the service catalog is used. (string +# value) +#cinder_store_auth_address = + +# User name to authenticate against Cinder. If , the user of +# current context is used. (string value) +#cinder_store_user_name = + +# Password for the user authenticating against Cinder. If , the +# current context auth token is used. (string value) +#cinder_store_password = + +# Project name where the image is stored in Cinder. If , the +# project in current context is used. (string value) +#cinder_store_project_name = + +# Path to the rootwrap configuration file to use for running commands +# as root. (string value) +#rootwrap_config = /etc/glance/rootwrap.conf + +# The host where the S3 server is listening. (string value) +#s3_store_host = + +# The S3 query token access key. (string value) +#s3_store_access_key = + +# The S3 query token secret key. (string value) +#s3_store_secret_key = + +# The S3 bucket to be used to store the Glance data. (string value) +#s3_store_bucket = + +# The local directory where uploads will be staged before they are +# transferred into S3. (string value) +#s3_store_object_buffer_dir = + +# A boolean to determine if the S3 bucket should be created on upload +# if it does not exist or if an error should be returned to the user. +# (boolean value) +#s3_store_create_bucket_on_put = false + +# The S3 calling format used to determine the bucket. Either subdomain +# or path can be used. (string value) +#s3_store_bucket_url_format = subdomain + +# What size, in MB, should S3 start chunking image files and do a +# multipart upload in S3. (integer value) +#s3_store_large_object_size = 100 + +# What multipart upload part size, in MB, should S3 use when uploading +# parts. The size must be greater than or equal to 5M. (integer value) +#s3_store_large_object_chunk_size = 10 + +# The number of thread pools to perform a multipart upload in S3. +# (integer value) +#s3_store_thread_pools = 10 + +# Enable the use of a proxy. (boolean value) +#s3_store_enable_proxy = false + +# Address or hostname for the proxy server. (string value) +#s3_store_proxy_host = + +# The port to use when connecting over a proxy. (integer value) +#s3_store_proxy_port = 8080 + +# The username to connect to the proxy. (string value) +#s3_store_proxy_user = + +# The password to use when connecting over a proxy. (string value) +#s3_store_proxy_password = + +# Images will be chunked into objects of this size (in megabytes). For +# best performance, this should be a power of two. (integer value) +#sheepdog_store_chunk_size = 64 + +# Port of sheep daemon. (integer value) +#sheepdog_store_port = 7000 + +# IP address of sheep daemon. (string value) +#sheepdog_store_address = localhost + +# Directory to which the Filesystem backend store writes images. +# (string value) +filesystem_store_datadir = {RIFT_VAR_ROOT}/glance/images/ + +# List of directories and its priorities to which the Filesystem +# backend store writes images. (multi valued) +#filesystem_store_datadirs = + +# The path to a file which contains the metadata to be returned with +# any location associated with this store. The file must contain a +# valid JSON object. The object should contain the keys 'id' and +# 'mountpoint'. The value for both keys should be 'string'. (string +# value) +#filesystem_store_metadata_file = + +# The required permission for created image file. In this way the user +# other service used, e.g. Nova, who consumes the image could be the +# exclusive member of the group that owns the files created. Assigning +# it less then or equal to zero means don't change the default +# permission of the file. This value will be decoded as an octal +# digit. (integer value) +#filesystem_store_file_perm = 0 + +# ESX/ESXi or vCenter Server target system. The server value can be an +# IP address or a DNS name. (string value) +#vmware_server_host = + +# Username for authenticating with VMware ESX/VC server. (string +# value) +#vmware_server_username = + +# Password for authenticating with VMware ESX/VC server. (string +# value) +#vmware_server_password = + +# Number of times VMware ESX/VC server API must be retried upon +# connection related issues. (integer value) +#vmware_api_retry_count = 10 + +# The interval used for polling remote tasks invoked on VMware ESX/VC +# server. (integer value) +#vmware_task_poll_interval = 5 + +# The name of the directory where the glance images will be stored in +# the VMware datastore. (string value) +#vmware_store_image_dir = /openstack_glance + +# If true, the ESX/vCenter server certificate is not verified. If +# false, then the default CA truststore is used for verification. This +# option is ignored if "vmware_ca_file" is set. (boolean value) +# Deprecated group/name - [DEFAULT]/vmware_api_insecure +#vmware_insecure = false + +# Specify a CA bundle file to use in verifying the ESX/vCenter server +# certificate. (string value) +#vmware_ca_file = + +# A list of datastores where the image can be stored. This option may +# be specified multiple times for specifying multiple datastores. The +# datastore name should be specified after its datacenter path, +# seperated by ":". An optional weight may be given after the +# datastore name, seperated again by ":". Thus, the required format +# becomes ::. When +# adding an image, the datastore with highest weight will be selected, +# unless there is not enough free space available in cases where the +# image size is already known. If no weight is given, it is assumed to +# be zero and the directory will be considered for selection last. If +# multiple datastores have the same weight, then the one with the most +# free space available is selected. (multi valued) +#vmware_datastores = + + +[image_format] + +# +# From glance.api +# + +# Supported values for the 'container_format' image attribute (list +# value) +# Deprecated group/name - [DEFAULT]/container_formats +container_formats = ami,ari,aki,bare,ovf,ova,docker + +# Supported values for the 'disk_format' image attribute (list value) +# Deprecated group/name - [DEFAULT]/disk_formats +disk_formats = ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso + + +[keystone_authtoken] + +# +# From keystonemiddleware.auth_token +# + +# Complete public Identity API endpoint. (string value) +#auth_uri = + +# API version of the admin Identity API endpoint. (string value) +#auth_version = + +# Do not handle authorization requests within the middleware, but +# delegate the authorization decision to downstream WSGI components. +# (boolean value) +#delay_auth_decision = false + +# Request timeout value for communicating with Identity API server. +# (integer value) +#http_connect_timeout = + +# How many times are we trying to reconnect when communicating with +# Identity API Server. (integer value) +#http_request_max_retries = 3 + +# Env key for the swift cache. (string value) +#cache = + +# Required if identity server requires client certificate (string +# value) +#certfile = + +# Required if identity server requires client certificate (string +# value) +#keyfile = + +# A PEM encoded Certificate Authority to use when verifying HTTPs +# connections. Defaults to system CAs. (string value) +#cafile = + +# Verify HTTPS connections. (boolean value) +#insecure = false + +# The region in which the identity server can be found. (string value) +#region_name = + +# Directory used to cache files related to PKI tokens. (string value) +#signing_dir = + +# Optionally specify a list of memcached server(s) to use for caching. +# If left undefined, tokens will instead be cached in-process. (list +# value) +# Deprecated group/name - [DEFAULT]/memcache_servers +#memcached_servers = + +# In order to prevent excessive effort spent validating tokens, the +# middleware caches previously-seen tokens for a configurable duration +# (in seconds). Set to -1 to disable caching completely. (integer +# value) +#token_cache_time = 300 + +# Determines the frequency at which the list of revoked tokens is +# retrieved from the Identity service (in seconds). A high number of +# revocation events combined with a low cache duration may +# significantly reduce performance. (integer value) +#revocation_cache_time = 10 + +# (Optional) If defined, indicate whether token data should be +# authenticated or authenticated and encrypted. If MAC, token data is +# authenticated (with HMAC) in the cache. If ENCRYPT, token data is +# encrypted and authenticated in the cache. If the value is not one of +# these options or empty, auth_token will raise an exception on +# initialization. (string value) +# Allowed values: None, MAC, ENCRYPT +#memcache_security_strategy = None + +# (Optional, mandatory if memcache_security_strategy is defined) This +# string is used for key derivation. (string value) +#memcache_secret_key = + +# (Optional) Number of seconds memcached server is considered dead +# before it is tried again. (integer value) +#memcache_pool_dead_retry = 300 + +# (Optional) Maximum total number of open connections to every +# memcached server. (integer value) +#memcache_pool_maxsize = 10 + +# (Optional) Socket timeout in seconds for communicating with a +# memcached server. (integer value) +#memcache_pool_socket_timeout = 3 + +# (Optional) Number of seconds a connection to memcached is held +# unused in the pool before it is closed. (integer value) +#memcache_pool_unused_timeout = 60 + +# (Optional) Number of seconds that an operation will wait to get a +# memcached client connection from the pool. (integer value) +#memcache_pool_conn_get_timeout = 10 + +# (Optional) Use the advanced (eventlet safe) memcached client pool. +# The advanced pool will only work under python 2.x. (boolean value) +#memcache_use_advanced_pool = false + +# (Optional) Indicate whether to set the X-Service-Catalog header. If +# False, middleware will not ask for service catalog on token +# validation and will not set the X-Service-Catalog header. (boolean +# value) +#include_service_catalog = true + +# Used to control the use and type of token binding. Can be set to: +# "disabled" to not check token binding. "permissive" (default) to +# validate binding information if the bind type is of a form known to +# the server and ignore it if not. "strict" like "permissive" but if +# the bind type is unknown the token will be rejected. "required" any +# form of token binding is needed to be allowed. Finally the name of a +# binding method that must be present in tokens. (string value) +#enforce_token_bind = permissive + +# If true, the revocation list will be checked for cached tokens. This +# requires that PKI tokens are configured on the identity server. +# (boolean value) +#check_revocations_for_cached = false + +# Hash algorithms to use for hashing PKI tokens. This may be a single +# algorithm or multiple. The algorithms are those supported by Python +# standard hashlib.new(). The hashes will be tried in the order given, +# so put the preferred one first for performance. The result of the +# first hash will be stored in the cache. This will typically be set +# to multiple values only while migrating from a less secure algorithm +# to a more secure one. Once all the old tokens are expired this +# option should be set to a single value for better performance. (list +# value) +#hash_algorithms = md5 + +# Authentication type to load (unknown value) +# Deprecated group/name - [DEFAULT]/auth_plugin +#auth_type = + +# Config Section from which to load plugin specific options (unknown +# value) +#auth_section = + + +[matchmaker_redis] + +# +# From oslo.messaging +# + +# Host to locate redis. (string value) +#host = 127.0.0.1 + +# Use this port to connect to redis host. (port value) +# Minimum value: 0 +# Maximum value: 65535 +#port = 6379 + +# Password for Redis server (optional). (string value) +#password = + +# List of Redis Sentinel hosts (fault tolerance mode) e.g. +# [host:port, host1:port ... ] (list value) +#sentinel_hosts = + +# Redis replica set name. (string value) +#sentinel_group_name = oslo-messaging-zeromq + +# Time in ms to wait between connection attempts. (integer value) +#wait_timeout = 500 + +# Time in ms to wait before the transaction is killed. (integer value) +#check_timeout = 20000 + +# Timeout in ms on blocking socket operations (integer value) +#socket_timeout = 1000 + + +[oslo_concurrency] + +# +# From oslo.concurrency +# + +# Enables or disables inter-process locks. (boolean value) +# Deprecated group/name - [DEFAULT]/disable_process_locking +#disable_process_locking = false + +# Directory to use for lock files. For security, the specified +# directory should only be writable by the user running the processes +# that need locking. Defaults to environment variable OSLO_LOCK_PATH. +# If external locks are used, a lock path must be set. (string value) +# Deprecated group/name - [DEFAULT]/lock_path +#lock_path = + + +[oslo_messaging_amqp] + +# +# From oslo.messaging +# + +# address prefix used when sending to a specific server (string value) +# Deprecated group/name - [amqp1]/server_request_prefix +#server_request_prefix = exclusive + +# address prefix used when broadcasting to all servers (string value) +# Deprecated group/name - [amqp1]/broadcast_prefix +#broadcast_prefix = broadcast + +# address prefix when sending to any server in group (string value) +# Deprecated group/name - [amqp1]/group_request_prefix +#group_request_prefix = unicast + +# Name for the AMQP container (string value) +# Deprecated group/name - [amqp1]/container_name +#container_name = + +# Timeout for inactive connections (in seconds) (integer value) +# Deprecated group/name - [amqp1]/idle_timeout +#idle_timeout = 0 + +# Debug: dump AMQP frames to stdout (boolean value) +# Deprecated group/name - [amqp1]/trace +#trace = false + +# CA certificate PEM file to verify server certificate (string value) +# Deprecated group/name - [amqp1]/ssl_ca_file +#ssl_ca_file = + +# Identifying certificate PEM file to present to clients (string +# value) +# Deprecated group/name - [amqp1]/ssl_cert_file +#ssl_cert_file = + +# Private key PEM file used to sign cert_file certificate (string +# value) +# Deprecated group/name - [amqp1]/ssl_key_file +#ssl_key_file = + +# Password for decrypting ssl_key_file (if encrypted) (string value) +# Deprecated group/name - [amqp1]/ssl_key_password +#ssl_key_password = + +# Accept clients using either SSL or plain TCP (boolean value) +# Deprecated group/name - [amqp1]/allow_insecure_clients +#allow_insecure_clients = false + +# Space separated list of acceptable SASL mechanisms (string value) +# Deprecated group/name - [amqp1]/sasl_mechanisms +#sasl_mechanisms = + +# Path to directory that contains the SASL configuration (string +# value) +# Deprecated group/name - [amqp1]/sasl_config_dir +#sasl_config_dir = + +# Name of configuration file (without .conf suffix) (string value) +# Deprecated group/name - [amqp1]/sasl_config_name +#sasl_config_name = + +# User name for message broker authentication (string value) +# Deprecated group/name - [amqp1]/username +#username = + +# Password for message broker authentication (string value) +# Deprecated group/name - [amqp1]/password +#password = + + +[oslo_messaging_notifications] + +# +# From oslo.messaging +# + +# The Drivers(s) to handle sending notifications. Possible values are +# messaging, messagingv2, routing, log, test, noop (multi valued) +# Deprecated group/name - [DEFAULT]/notification_driver +#driver = + +# A URL representing the messaging driver to use for notifications. If +# not set, we fall back to the same configuration used for RPC. +# (string value) +# Deprecated group/name - [DEFAULT]/notification_transport_url +#transport_url = + +# AMQP topic used for OpenStack notifications. (list value) +# Deprecated group/name - [rpc_notifier2]/topics +# Deprecated group/name - [DEFAULT]/notification_topics +#topics = notifications + + +[oslo_messaging_rabbit] + +# +# From oslo.messaging +# + +# Use durable queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/amqp_durable_queues +# Deprecated group/name - [DEFAULT]/rabbit_durable_queues +#amqp_durable_queues = false + +# Auto-delete queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/amqp_auto_delete +#amqp_auto_delete = false + +# SSL version to use (valid only if SSL enabled). Valid values are +# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be +# available on some distributions. (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_version +#kombu_ssl_version = + +# SSL key file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile +#kombu_ssl_keyfile = + +# SSL cert file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile +#kombu_ssl_certfile = + +# SSL certification authority file (valid only if SSL enabled). +# (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs +#kombu_ssl_ca_certs = + +# How long to wait before reconnecting in response to an AMQP consumer +# cancel notification. (floating point value) +# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay +#kombu_reconnect_delay = 1.0 + +# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression +# will not be used. This option may notbe available in future +# versions. (string value) +#kombu_compression = + +# How long to wait a missing client beforce abandoning to send it its +# replies. This value should not be longer than rpc_response_timeout. +# (integer value) +# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout +#kombu_missing_consumer_retry_timeout = 60 + +# Determines how the next RabbitMQ node is chosen in case the one we +# are currently connected to becomes unavailable. Takes effect only if +# more than one RabbitMQ node is provided in config. (string value) +# Allowed values: round-robin, shuffle +#kombu_failover_strategy = round-robin + +# The RabbitMQ broker address where a single node is used. (string +# value) +# Deprecated group/name - [DEFAULT]/rabbit_host +#rabbit_host = localhost + +# The RabbitMQ broker port where a single node is used. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rabbit_port +#rabbit_port = 5672 + +# RabbitMQ HA cluster host:port pairs. (list value) +# Deprecated group/name - [DEFAULT]/rabbit_hosts +#rabbit_hosts = $rabbit_host:$rabbit_port + +# Connect over SSL for RabbitMQ. (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_use_ssl +#rabbit_use_ssl = false + +# The RabbitMQ userid. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_userid +#rabbit_userid = guest + +# The RabbitMQ password. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_password +#rabbit_password = guest + +# The RabbitMQ login method. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_login_method +#rabbit_login_method = AMQPLAIN + +# The RabbitMQ virtual host. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_virtual_host +#rabbit_virtual_host = / + +# How frequently to retry connecting with RabbitMQ. (integer value) +#rabbit_retry_interval = 1 + +# How long to backoff for between retries when connecting to RabbitMQ. +# (integer value) +# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff +#rabbit_retry_backoff = 2 + +# Maximum interval of RabbitMQ connection retries. Default is 30 +# seconds. (integer value) +#rabbit_interval_max = 30 + +# Maximum number of RabbitMQ connection retries. Default is 0 +# (infinite retry count). (integer value) +# Deprecated group/name - [DEFAULT]/rabbit_max_retries +#rabbit_max_retries = 0 + +# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change +# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, +# queue mirroring is no longer controlled by the x-ha-policy argument +# when declaring a queue. If you just want to make sure that all +# queues (except those with auto-generated names) are mirrored across +# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha- +# mode": "all"}' " (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_ha_queues +#rabbit_ha_queues = false + +# Positive integer representing duration in seconds for queue TTL +# (x-expires). Queues which are unused for the duration of the TTL are +# automatically deleted. The parameter affects only reply and fanout +# queues. (integer value) +# Minimum value: 1 +#rabbit_transient_queues_ttl = 600 + +# Specifies the number of messages to prefetch. Setting to zero allows +# unlimited messages. (integer value) +#rabbit_qos_prefetch_count = 0 + +# Number of seconds after which the Rabbit broker is considered down +# if heartbeat's keep-alive fails (0 disable the heartbeat). +# EXPERIMENTAL (integer value) +#heartbeat_timeout_threshold = 60 + +# How often times during the heartbeat_timeout_threshold we check the +# heartbeat. (integer value) +#heartbeat_rate = 2 + +# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake +# (boolean value) +# Deprecated group/name - [DEFAULT]/fake_rabbit +#fake_rabbit = false + +# Maximum number of channels to allow (integer value) +#channel_max = + +# The maximum byte size for an AMQP frame (integer value) +#frame_max = + +# How often to send heartbeats for consumer's connections (integer +# value) +#heartbeat_interval = 1 + +# Enable SSL (boolean value) +#ssl = + +# Arguments passed to ssl.wrap_socket (dict value) +#ssl_options = + +# Set socket timeout in seconds for connection's socket (floating +# point value) +#socket_timeout = 0.25 + +# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating +# point value) +#tcp_user_timeout = 0.25 + +# Set delay for reconnection to some host which has connection error +# (floating point value) +#host_connection_reconnect_delay = 0.25 + +# Maximum number of connections to keep queued. (integer value) +#pool_max_size = 10 + +# Maximum number of connections to create above `pool_max_size`. +# (integer value) +#pool_max_overflow = 0 + +# Default number of seconds to wait for a connections to available +# (integer value) +#pool_timeout = 30 + +# Lifetime of a connection (since creation) in seconds or None for no +# recycling. Expired connections are closed on acquire. (integer +# value) +#pool_recycle = 600 + +# Threshold at which inactive (since release) connections are +# considered stale in seconds or None for no staleness. Stale +# connections are closed on acquire. (integer value) +#pool_stale = 60 + +# Persist notification messages. (boolean value) +#notification_persistence = false + +# Exchange name for for sending notifications (string value) +#default_notification_exchange = ${control_exchange}_notification + +# Max number of not acknowledged message which RabbitMQ can send to +# notification listener. (integer value) +#notification_listener_prefetch_count = 100 + +# Reconnecting retry count in case of connectivity problem during +# sending notification, -1 means infinite retry. (integer value) +#default_notification_retry_attempts = -1 + +# Reconnecting retry delay in case of connectivity problem during +# sending notification message (floating point value) +#notification_retry_delay = 0.25 + +# Time to live for rpc queues without consumers in seconds. (integer +# value) +#rpc_queue_expiration = 60 + +# Exchange name for sending RPC messages (string value) +#default_rpc_exchange = ${control_exchange}_rpc + +# Exchange name for receiving RPC replies (string value) +#rpc_reply_exchange = ${control_exchange}_rpc_reply + +# Max number of not acknowledged message which RabbitMQ can send to +# rpc listener. (integer value) +#rpc_listener_prefetch_count = 100 + +# Max number of not acknowledged message which RabbitMQ can send to +# rpc reply listener. (integer value) +#rpc_reply_listener_prefetch_count = 100 + +# Reconnecting retry count in case of connectivity problem during +# sending reply. -1 means infinite retry during rpc_timeout (integer +# value) +#rpc_reply_retry_attempts = -1 + +# Reconnecting retry delay in case of connectivity problem during +# sending reply. (floating point value) +#rpc_reply_retry_delay = 0.25 + +# Reconnecting retry count in case of connectivity problem during +# sending RPC message, -1 means infinite retry. If actual retry +# attempts in not 0 the rpc request could be processed more then one +# time (integer value) +#default_rpc_retry_attempts = -1 + +# Reconnecting retry delay in case of connectivity problem during +# sending RPC message (floating point value) +#rpc_retry_delay = 0.25 + + +[oslo_policy] + +# +# From oslo.policy +# + +# The JSON file that defines policies. (string value) +# Deprecated group/name - [DEFAULT]/policy_file +#policy_file = policy.json + +# Default rule. Enforced when a requested rule is not found. (string +# value) +# Deprecated group/name - [DEFAULT]/policy_default_rule +#policy_default_rule = default + +# Directories where policy configuration files are stored. They can be +# relative to any directory in the search path defined by the +# config_dir option, or absolute paths. The file defined by +# policy_file must exist for these directories to be searched. +# Missing or empty directories are ignored. (multi valued) +# Deprecated group/name - [DEFAULT]/policy_dirs +#policy_dirs = policy.d + + +[paste_deploy] + +# +# From glance.api +# + +# Partial name of a pipeline in your paste configuration file with the +# service name removed. For example, if your paste section name is +# [pipeline:glance-api-keystone] use the value "keystone" (string +# value) +flavor = + +# Name of the paste configuration file. (string value) +config_file = {RIFT_INSTALL}/etc/glance/glance-api-paste.ini + + +[profiler] + +# +# From glance.api +# + +# If False fully disable profiling feature. (boolean value) +#enabled = false + +# If False doesn't trace SQL requests. (boolean value) +#trace_sqlalchemy = false + +# Secret key to use to sign Glance API and Glance Registry services +# tracing messages. (string value) +#hmac_keys = SECRET_KEY + + +[store_type_location_strategy] + +# +# From glance.api +# + +# The store names to use to get store preference order. The name must +# be registered by one of the stores defined by the 'stores' config +# option. This option will be applied when you using 'store_type' +# option as image location strategy defined by the 'location_strategy' +# config option. (list value) +#store_type_preference = + + +[task] + +# +# From glance.api +# + +# Time in hours for which a task lives after, either succeeding or +# failing (integer value) +# Deprecated group/name - [DEFAULT]/task_time_to_live +#task_time_to_live = 48 + +# Specifies which task executor to be used to run the task scripts. +# (string value) +#task_executor = taskflow + +# Work dir for asynchronous task operations. The directory set here +# will be used to operate over images - normally before they are +# imported in the destination store. When providing work dir, make +# sure enough space is provided for concurrent tasks to run +# efficiently without running out of space. A rough estimation can be +# done by multiplying the number of `max_workers` - or the N of +# workers running - by an average image size (e.g 500MB). The image +# size estimation should be done based on the average size in your +# deployment. Note that depending on the tasks running you may need to +# multiply this number by some factor depending on what the task does. +# For example, you may want to double the available size if image +# conversion is enabled. All this being said, remember these are just +# estimations and you should do them based on the worst case scenario +# and be prepared to act in case they were wrong. (string value) +#work_dir = + + +[taskflow_executor] + +# +# From glance.api +# + +# The mode in which the engine will run. Can be 'serial' or +# 'parallel'. (string value) +# Allowed values: serial, parallel +#engine_mode = parallel + +# The number of parallel activities executed at the same time by the +# engine. The value can be greater than one when the engine mode is +# 'parallel'. (integer value) +# Deprecated group/name - [task]/eventlet_executor_pool_size +#max_workers = 10