echo -e " -H <VCA host> use specific juju host controller IP"
echo -e " -S <VCA secret> use VCA/juju secret key"
echo -e " -P <VCA pubkey> use VCA/juju public key file"
- echo -e " -C <VCA cacert> use VCA/juju CA certificate file"
echo -e " -A <VCA apiproxy> use VCA/juju API proxy"
echo -e " --pla: install the PLA module for placement support"
+ echo -e " --ng-sa: install Airflow and Pushgateway to get VNF and NS status (experimental)"
echo -e " -m <MODULE>: install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
- echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor)"
+ echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
echo -e " -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
echo -e " -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
echo -e " -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano"
echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana"
echo -e " --volume: create a VM volume when installing to OpenStack"
-# echo -e " --reconfigure: reconfigure the modules (DO NOT change NAT rules)"
-# echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
echo -e " --showopts: print chosen options and exit (only for debugging)"
echo -e " --charmed: Deploy and operate OSM with Charms on k8s"
echo -e " [--bundle <bundle path>]: Specify with which bundle to deploy OSM with charms (--charmed option)"
echo -e " [--k8s <kubeconfig path>]: Specify with which kubernetes to deploy OSM with charms (--charmed option)"
echo -e " [--vca <name>]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
+ echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
echo -e " [--lxd <yaml path>]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
echo -e " [--lxd-cred <yaml path>]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-function install_lxd() {
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- # Apply sysctl production values for optimal performance
- sudo cp ${OSM_DEVOPS}/installers/60-lxd-production.conf /etc/sysctl.d/60-lxd-production.conf
- sudo sysctl --system
-
- # Install LXD snap
- sudo apt-get remove --purge -y liblxc1 lxc-common lxcfs lxd lxd-client
- sudo snap install lxd --channel $LXD_VERSION/stable
-
- # Configure LXD
- sudo usermod -a -G lxd `whoami`
- cat ${OSM_DEVOPS}/installers/lxd-preseed.conf | sed 's/^config: {}/config:\n core.https_address: '$DEFAULT_IP':8443/' | sg lxd -c "lxd init --preseed"
- sg lxd -c "lxd waitready"
- DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
- [ -z "$DEFAULT_IF" ] && DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
- [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
- DEFAULT_MTU=$(ip addr show ${DEFAULT_IF} | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
- sg lxd -c "lxc profile device set default eth0 mtu $DEFAULT_MTU"
- sg lxd -c "lxc network set lxdbr0 bridge.mtu $DEFAULT_MTU"
- #sudo systemctl stop lxd-bridge
- #sudo systemctl --system daemon-reload
- #sudo systemctl enable lxd-bridge
- #sudo systemctl start lxd-bridge
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+function check_packages() {
+ NEEDED_PACKAGES="$1"
+ echo -e "Checking required packages: ${NEEDED_PACKAGES}"
+ for PACKAGE in ${NEEDED_PACKAGES} ; do
+ dpkg -L ${PACKAGE}
+ if [ $? -ne 0 ]; then
+ echo -e "Package ${PACKAGE} is not installed."
+ echo -e "Updating apt-cache ..."
+ sudo apt-get update
+ echo -e "Installing ${PACKAGE} ..."
+ sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
+ fi
+ done
+ echo -e "Required packages are present: ${NEEDED_PACKAGES}"
}
function ask_user(){
python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
fi
if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
- sudo apt-get install -y libcurl4-openssl-dev libssl-dev
+ sudo apt-get install -y libcurl4-openssl-dev libssl-dev libmagic1
python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
fi
[ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
sg docker -c "docker pull wurstmeister/kafka:${KAFKA_TAG}" || FATAL "cannot get kafka docker image"
fi
- if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q MONGO ; then
- sg docker -c "docker pull mongo" || FATAL "cannot get mongo docker image"
- fi
-
if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q PROMETHEUS ; then
sg docker -c "docker pull prom/prometheus:${PROMETHEUS_TAG}" || FATAL "cannot get prometheus docker image"
fi
if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q GRAFANA ; then
sg docker -c "docker pull grafana/grafana:${GRAFANA_TAG}" || FATAL "cannot get grafana docker image"
+ sg docker -c "docker pull kiwigrid/k8s-sidecar:${KIWIGRID_K8S_SIDECAR_TAG}" || FATAL "cannot get kiwigrid k8s-sidecar docker image"
fi
if [ -z "$TO_REBUILD" ] || echo $TO_REBUILD | grep -q NBI || echo $TO_REBUILD | grep -q KEYSTONE-DB ; then
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
#Kubernetes resources
sudo cp -bR ${OSM_DEVOPS}/installers/docker/osm_pods $OSM_DOCKER_WORK_DIR
- sudo rm -f $OSM_K8S_WORK_DIR/mongo.yaml
- [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
-}
-
-function generate_prometheus_grafana_files() {
- #this only works with docker swarm
- [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- # Prometheus files
- sudo mkdir -p $OSM_DOCKER_WORK_DIR/prometheus
- sudo cp -b ${OSM_DEVOPS}/installers/docker/prometheus/prometheus.yml $OSM_DOCKER_WORK_DIR/prometheus/prometheus.yml
-
- # Grafana files
- sudo mkdir -p $OSM_DOCKER_WORK_DIR/grafana
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/dashboards-osm.yml $OSM_DOCKER_WORK_DIR/grafana/dashboards-osm.yml
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/datasource-prometheus.yml $OSM_DOCKER_WORK_DIR/grafana/datasource-prometheus.yml
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/osm-sample-dashboard.json $OSM_DOCKER_WORK_DIR/grafana/osm-sample-dashboard.json
- sudo cp -b ${OSM_DEVOPS}/installers/docker/grafana/osm-system-dashboard.json $OSM_DOCKER_WORK_DIR/grafana/osm-system-dashboard.json
-
- # Prometheus Exporters files
- sudo mkdir -p $OSM_DOCKER_WORK_DIR/prometheus_exporters
- sudo cp -b ${OSM_DEVOPS}/installers/docker/prometheus_exporters/node_exporter.service $OSM_DOCKER_WORK_DIR/prometheus_exporters/node_exporter.service
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
sudo cp $OSM_DOCKER_WORK_DIR/pol.env{,~}
sudo cp $OSM_DOCKER_WORK_DIR/ro-db.env{,~}
sudo cp $OSM_DOCKER_WORK_DIR/ro.env{,~}
+ if [ -n "${INSTALL_NGSA}" ]; then
+ sudo cp $OSM_DOCKER_WORK_DIR/ngsa.env{,~}
+ fi
echo "Generating docker env files"
# LCM
else
sudo sed -i "s|OSMLCM_VCA_K8S_CLOUD.*|OSMLCM_VCA_K8S_CLOUD=${OSM_VCA_K8S_CLOUDNAME}|g" $OSM_DOCKER_WORK_DIR/lcm.env
fi
+ if [ -n "${OSM_BEHIND_PROXY}" ]; then
+ if ! grep -Fq "HTTP_PROXY" $OSM_DOCKER_WORK_DIR/lcm.env; then
+ echo "HTTP_PROXY=${HTTP_PROXY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
+ else
+ sudo sed -i "s|HTTP_PROXY.*|HTTP_PROXY=${HTTP_PROXY}|g" $OSM_DOCKER_WORK_DIR/lcm.env
+ fi
+ if ! grep -Fq "HTTPS_PROXY" $OSM_DOCKER_WORK_DIR/lcm.env; then
+ echo "HTTPS_PROXY=${HTTPS_PROXY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
+ else
+ sudo sed -i "s|HTTPS_PROXY.*|HTTPS_PROXY=${HTTPS_PROXY}|g" $OSM_DOCKER_WORK_DIR/lcm.env
+ fi
+ if ! grep -Fq "NO_PROXY" $OSM_DOCKER_WORK_DIR/lcm.env; then
+ echo "NO_PROXY=${NO_PROXY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/lcm.env
+ else
+ sudo sed -i "s|NO_PROXY.*|NO_PROXY=${NO_PROXY}|g" $OSM_DOCKER_WORK_DIR/lcm.env
+ fi
+ fi
# RO
MYSQL_ROOT_PASSWORD=$(generate_secret)
fi
if ! grep -Fq "OS_NOTIFIER_URI" $OSM_DOCKER_WORK_DIR/mon.env; then
- echo "OS_NOTIFIER_URI=http://${DEFAULT_IP}:8662" |sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
+ echo "OS_NOTIFIER_URI=http://${OSM_DEFAULT_IP}:8662" |sudo tee -a $OSM_DOCKER_WORK_DIR/mon.env
else
- sudo sed -i "s|OS_NOTIFIER_URI.*|OS_NOTIFIER_URI=http://$DEFAULT_IP:8662|g" $OSM_DOCKER_WORK_DIR/mon.env
+ sudo sed -i "s|OS_NOTIFIER_URI.*|OS_NOTIFIER_URI=http://$OSM_DEFAULT_IP:8662|g" $OSM_DOCKER_WORK_DIR/mon.env
fi
if ! grep -Fq "OSMMON_VCA_HOST" $OSM_DOCKER_WORK_DIR/mon.env; then
sudo sed -i "s|OSMMON_VCA_CACERT.*|OSMMON_VCA_CACERT=${OSM_VCA_CACERT}|g" $OSM_DOCKER_WORK_DIR/mon.env
fi
-
# POL
if [ ! -f $OSM_DOCKER_WORK_DIR/pol.env ]; then
echo "OSMPOL_SQL_DATABASE_URI=mysql://root:${MYSQL_ROOT_PASSWORD}@mysql:3306/pol" | sudo tee -a $OSM_DOCKER_WORK_DIR/pol.env
fi
+ # NG-SA
+ if [ -n "${INSTALL_NGSA}" ] && [ ! -f $OSM_DOCKER_WORK_DIR/ngsa.env ]; then
+ echo "OSMMON_DATABASE_COMMONKEY=${OSM_DATABASE_COMMONKEY}" | sudo tee -a $OSM_DOCKER_WORK_DIR/ngsa.env
+ fi
+
echo "Finished generation of docker env files"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
kubectl create secret generic ro-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/ro.env
kubectl create secret generic keystone-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/keystone.env
kubectl create secret generic pol-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/pol.env
+ if [ -n "${INSTALL_NGSA}" ]; then
+ kubectl create secret generic ngsa-secret -n $OSM_STACK_NAME --from-env-file=$OSM_DOCKER_WORK_DIR/ngsa.env
+ fi
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
function deploy_osm_pla_service() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- # corresponding to namespace_vol
- sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_DOCKER_WORK_DIR/osm_pla/pla.yaml
# corresponding to deploy_osm_services
kubectl apply -n $OSM_STACK_NAME -f $OSM_DOCKER_WORK_DIR/osm_pla
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
+function install_osm_ngsa_service() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+ $OSM_DEVOPS/installers/install_ngsa.sh -d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} ${DEBUG_INSTALL} || \
+ FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
function parse_yaml() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
TAG=$1
for module in $services; do
if [ "$module" == "pla" ]; then
if [ -n "$INSTALL_PLA" ]; then
- echo "Updating K8s manifest file from opensourcemano\/${module}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${module}:${TAG}"
+ echo "Updating K8s manifest file from opensourcemano\/pla:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/pla:${TAG}"
sudo sed -i "s#opensourcemano/pla:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/pla:${TAG}#g" ${OSM_DOCKER_WORK_DIR}/osm_pla/pla.yaml
fi
else
- echo "Updating K8s manifest file from opensourcemano\/${module}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${module}:${TAG}"
- sudo sed -i "s#opensourcemano/${module}:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/${module}:${TAG}#g" ${OSM_K8S_WORK_DIR}/${module}.yaml
+ image=${module}
+ if [ "$module" == "ng-prometheus" ]; then
+ image="prometheus"
+ fi
+ echo "Updating K8s manifest file from opensourcemano\/${image}:.* to ${DOCKER_REGISTRY_URL}${DOCKER_USER}\/${image}:${TAG}"
+ sudo sed -i "s#opensourcemano/${image}:.*#${DOCKER_REGISTRY_URL}${DOCKER_USER}/${image}:${TAG}#g" ${OSM_K8S_WORK_DIR}/${module}.yaml
fi
done
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
function update_manifest_files() {
- osm_services="nbi lcm ro pol mon ng-ui keystone pla prometheus"
+ osm_services="nbi lcm ro pol mon ng-ui keystone pla prometheus ng-prometheus"
list_of_services=""
for module in $osm_services; do
module_upper="${module^^}"
list_of_services="$list_of_services $module"
fi
done
- if [ ! "$OSM_DOCKER_TAG" == "11" ]; then
+ if [ ! "$OSM_DOCKER_TAG" == "13" ]; then
parse_yaml $OSM_DOCKER_TAG $list_of_services
fi
if [ -n "$MODULE_DOCKER_TAG" ]; then
parse_yaml $MODULE_DOCKER_TAG $list_of_services_to_rebuild
fi
+ # The manifest for prometheus is prometheus.yaml or ng-prometheus.yaml, depending on the installation option
+ if [ -n "$INSTALL_NGSA" ]; then
+ sudo rm -f ${OSM_K8S_WORK_DIR}/prometheus.yaml
+ else
+ sudo rm -f ${OSM_K8S_WORK_DIR}/ng-prometheus.yaml
+ fi
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
function namespace_vol() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- osm_services="nbi lcm ro pol mon kafka mysql prometheus"
+ # List of services with a volume mounted in path /var/lib/osm
+ osm_services="mysql"
for osm in $osm_services; do
- sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_K8S_WORK_DIR/$osm.yaml
+ if [ -f "$OSM_K8S_WORK_DIR/$osm.yaml" ] ; then
+ sudo sed -i "s#path: /var/lib/osm#path: $OSM_NAMESPACE_VOL#g" $OSM_K8S_WORK_DIR/$osm.yaml
+ fi
done
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-function install_osm() {
+function ask_proceed() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
- track checks checkingroot_ok
- [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
- track checks noroot_ok
[ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
1. Install and configure LXD
5. Install and initialize Kubernetes
as pre-requirements.
Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
+
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
+function check_osm_behind_proxy() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+
+ export OSM_BEHIND_PROXY=""
+ export OSM_PROXY_ENV_VARIABLES=""
+ [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
+ [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
+ [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
+ [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
+ [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
+ [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
+
+ echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
+ echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
+
+ if [ -n "${OSM_BEHIND_PROXY}" ]; then
+ [ -z "$ASSUME_YES" ] && ! ask_user "
+The following env variables have been found for the current user:
+${OSM_PROXY_ENV_VARIABLES}.
+
+This suggests that this machine is behind a proxy and a special configuration is required.
+The installer will install Docker CE, LXD and Juju to work behind a proxy using those
+env variables.
+
+Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
+Depending on the program, the env variables to work behind a proxy might be different
+(e.g. http_proxy vs HTTP_PROXY).
+
+For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
+and HTTPS_PROXY are defined.
+
+Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
+those env variables are also set for root user. If you are not sure whether those variables
+are configured for the root user, you can stop the installation now.
+
+Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
+ else
+ echo "This machine is not behind a proxy"
+ fi
+
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
+function find_devops_folder() {
+ if [ -z "$OSM_DEVOPS" ]; then
+ if [ -n "$TEST_INSTALLER" ]; then
+ echo -e "\nUsing local devops repo for OSM installation"
+ OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
+ else
+ echo -e "\nCreating temporary dir for OSM installation"
+ OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
+ trap 'rm -rf "$OSM_DEVOPS"' EXIT
+ git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
+ fi
+ fi
+}
+
+function install_osm() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+
+ trap ctrl_c INT
+
+ # TODO: move this under start
+ [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
+
+ check_osm_behind_proxy
+ track checks proxy_ok
+
+ check_packages "git wget curl tar snapd"
+
+ sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
+
+ find_devops_folder
+
+ # TODO: the use of stacks come from docker-compose. We should probably remove
+ [ "${OSM_STACK_NAME}" == "osm" ] || OSM_DOCKER_WORK_DIR="$OSM_WORK_DIR/stack/$OSM_STACK_NAME"
+
+ track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
+
+ track checks checkingroot_ok
+ [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
+ track checks noroot_ok
+
+ ask_proceed
track checks proceed_ok
echo "Installing OSM"
echo "Determining IP address of the interface with the default route"
- DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
- [ -z "$DEFAULT_IF" ] && DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
- [ -z "$DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
- DEFAULT_IP=`ip -o -4 a s ${DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]}'`
- [ -z "$DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
+ [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
+ [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
+ [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
+ OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
+ [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
# configure apt proxy
[ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
# if no host is passed in, we need to install lxd/juju, unless explicilty asked not to
if [ -z "$OSM_VCA_HOST" ] && [ -z "$INSTALL_NOLXD" ] && [ -z "$LXD_CLOUD_FILE" ]; then
- need_packages_lw="snapd"
- echo -e "Checking required packages: $need_packages_lw"
- dpkg -l $need_packages_lw &>/dev/null \
- || ! echo -e "One or several required packages are not installed. Updating apt cache requires root privileges." \
- || sudo apt-get update \
- || FATAL "failed to run apt-get update"
- dpkg -l $need_packages_lw &>/dev/null \
- || ! echo -e "Installing $need_packages_lw requires root privileges." \
- || sudo apt-get install -y $need_packages_lw \
- || FATAL "failed to install $need_packages_lw"
- install_lxd
+ LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
+ [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
+ $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
fi
track prereq prereqok_ok
if [ ! -n "$INSTALL_NODOCKER" ]; then
DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
[ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
+ [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
$OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
fi
[ ! -d "$OSM_DOCKER_WORK_DIR/osm_pla" -a -n "$INSTALL_PLA" ] && sudo mkdir -p $OSM_DOCKER_WORK_DIR/osm_pla
sudo cp -b $OSM_DEVOPS/installers/docker/cluster-config.yaml $OSM_DOCKER_WORK_DIR/cluster-config.yaml
- $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${DEFAULT_IP} -d ${OSM_DOCKER_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
+ $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_DOCKER_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
track k8scluster k8scluster_ok
- JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_STACK_NAME} -i ${DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
+ JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_STACK_NAME} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_NOJUJU} ${INSTALL_CACHELXDIMAGES}"
[ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
[ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
[ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
[ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
+ [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
$OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
set_vca_variables
track juju juju_ok
track deploy_osm namespace_vol_ok
deploy_osm_services
track deploy_osm deploy_osm_services_k8s_ok
- if [ -n "$INSTALL_PLA"]; then
+ if [ -n "$INSTALL_PLA" ]; then
# optional PLA install
deploy_osm_pla_service
track deploy_osm deploy_osm_pla_ok
install_k8s_monitoring
track deploy_osm install_k8s_monitoring_ok
fi
+ if [ -n "$INSTALL_NGSA" ]; then
+ # optional PLA install
+ install_osm_ngsa_service
+ track deploy_osm install_osm_ngsa_ok
+ fi
[ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
track osmclient osmclient_ok
echo -e "Checking OSM health state..."
$OSM_DEVOPS/installers/osm_health.sh -s ${OSM_STACK_NAME} -k || \
- echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
+ (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
echo -e "Check OSM status with: kubectl -n ${OSM_STACK_NAME} get all" && \
- track healthchecks osm_unhealthy didnotconverge
+ track healthchecks osm_unhealthy didnotconverge)
track healthchecks after_healthcheck_ok
add_local_k8scluster
track final_ops add_local_k8scluster_ok
- wget -q -O- https://osm-download.etsi.org/ftp/osm-11.0-eleven/README2.txt &> /dev/null
+ arrange_docker_default_network_policy
+
+ wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
track end
sudo find /etc/osm
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
return 0
}
+function arrange_docker_default_network_policy() {
+ echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
+ sudo iptables -I DOCKER-USER -j ACCEPT
+ sudo iptables-save | sudo tee /etc/iptables/rules.v4
+ sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
+}
+
function install_k8s_monitoring() {
[ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
# install OSM monitoring
echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
echo "INSTALL_LXD=$INSTALL_LXD"
+ echo "INSTALL_NGSA=$INSTALL_NGSA"
echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
echo "INSTALL_NOJUJU=$INSTALL_NOJUJU"
echo "INSTALL_NOLXD=$INSTALL_NOLXD"
echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
echo "OSM_DEVOPS=$OSM_DEVOPS"
echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
+ echo "OSM_DOCKER_WORK_DIR=$OSM_DOCKER_WORK_DIR"
+ echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
+ echo "OSM_K8S_WORK_DIR=$OSM_K8S_WORK_DIR"
echo "OSM_STACK_NAME=$OSM_STACK_NAME"
echo "OSM_VCA_HOST=$OSM_VCA_HOST"
echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
[ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
}
-LXD_VERSION=4.0
-JUJU_VERSION=2.9
-JUJU_AGENT_VERSION=2.9.17
+function ctrl_c() {
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
+ echo "** Trapped CTRL-C"
+ FATAL "User stopped the installation"
+ [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
+}
+
UNINSTALL=""
DEVELOP=""
UPDATE=""
DEBUG_INSTALL=""
RELEASE="ReleaseTEN"
REPOSITORY="stable"
-INSTALL_VIMEMU=""
+INSTALL_K8S_MONITOR=""
+INSTALL_NGSA=""
INSTALL_PLA=""
+INSTALL_VIMEMU=""
LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
LXD_REPOSITORY_PATH=""
INSTALL_LIGHTWEIGHT="y"
INSTALL_NOLXD=""
INSTALL_NODOCKER=""
INSTALL_NOJUJU=""
-INSTALL_K8S_MONITOR=""
INSTALL_NOHOSTCLIENT=""
INSTALL_CACHELXDIMAGES=""
OSM_DEVOPS=
REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
OSM_WORK_DIR="/etc/osm"
-OSM_DOCKER_WORK_DIR="/etc/osm/docker"
+OSM_DOCKER_WORK_DIR="${OSM_WORK_DIR}/docker"
OSM_K8S_WORK_DIR="${OSM_DOCKER_WORK_DIR}/osm_pods"
+OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
OSM_HOST_VOL="/var/lib/osm"
OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_STACK_NAME}"
OSM_DOCKER_TAG=latest
DOCKER_USER=opensourcemano
PULL_IMAGES="y"
KAFKA_TAG=2.11-1.0.2
-PROMETHEUS_TAG=v2.4.3
-GRAFANA_TAG=latest
+KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
+PROMETHEUS_TAG=v2.28.1
+GRAFANA_TAG=8.1.1
PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
PROMETHEUS_CADVISOR_TAG=latest
KEYSTONEDB_TAG=10
o)
INSTALL_ONLY="y"
[ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
+ [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
;;
O)
INSTALL_TO_OPENSTACK="y"
[ "${OPTARG}" == "microstack" ] && continue
[ "${OPTARG}" == "overlay" ] && continue
[ "${OPTARG}" == "only-vca" ] && continue
+ [ "${OPTARG}" == "small-profile" ] && continue
[ "${OPTARG}" == "vca" ] && continue
[ "${OPTARG}" == "ha" ] && continue
[ "${OPTARG}" == "tag" ] && continue
[ "${OPTARG}" == "registry" ] && continue
[ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
+ [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
[ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
[ "${OPTARG}" == "nocachelxdimages" ] && continue
[ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
# Uninstall if "--uninstall"
if [ -n "$UNINSTALL" ]; then
if [ -n "$CHARMED" ]; then
- track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
else
# Charmed installation
if [ -n "$CHARMED" ]; then
- ${OSM_DEVOPS}/installers/charmed_install.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
+ sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
+ export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
+ track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
+ ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
FATAL_TRACK charmed_install "charmed_install.sh failed"
+ wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README2.txt &> /dev/null
+ track end installation_type $OSM_INSTALLATION_TYPE
echo -e "\nDONE"
exit 0
fi
fi
# Community_installer
-[ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
+
[ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
[ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
-
# if develop, we force master
[ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
-
-need_packages="git wget curl tar"
-
-echo -e "Checking required packages: $need_packages"
-dpkg -l $need_packages &>/dev/null \
- || ! echo -e "One or several required packages are not installed. Updating apt cache requires root privileges." \
- || sudo apt-get update \
- || FATAL "failed to run apt-get update"
-dpkg -l $need_packages &>/dev/null \
- || ! echo -e "Installing $need_packages requires root privileges." \
- || sudo apt-get install -y $need_packages \
- || FATAL "failed to install $need_packages"
-sudo snap install jq
-if [ -z "$OSM_DEVOPS" ]; then
- if [ -n "$TEST_INSTALLER" ]; then
- echo -e "\nUsing local devops repo for OSM installation"
- OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
- else
- echo -e "\nCreating temporary dir for OSM installation"
- OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
- trap 'rm -rf "$OSM_DEVOPS"' EXIT
-
- git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
-
- if [ -z "$COMMIT_ID" ]; then
- echo -e "\nGuessing the current stable release"
- LATEST_STABLE_DEVOPS=`git -C $OSM_DEVOPS tag -l v[0-9].* | sort -V | tail -n1`
- [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
-
- echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
- COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
- else
- echo -e "\nDEVOPS Using commit $COMMIT_ID"
- fi
- git -C $OSM_DEVOPS checkout $COMMIT_ID
- fi
-fi
-
-[ "${OSM_STACK_NAME}" == "osm" ] || OSM_DOCKER_WORK_DIR="$OSM_WORK_DIR/stack/$OSM_STACK_NAME"
OSM_K8S_WORK_DIR="$OSM_DOCKER_WORK_DIR/osm_pods" && OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_STACK_NAME}"
[ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
+[ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
[ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
#Installation starts here
-wget -q -O- https://osm-download.etsi.org/ftp/osm-11.0-eleven/README.txt &> /dev/null
+wget -q -O- https://osm-download.etsi.org/ftp/osm-13.0-thirteen/README.txt &> /dev/null
export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
-
-track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none
-
install_osm
echo -e "\nDONE"
exit 0
-