echo -e "Install OSM from source code"
echo -e " OPTIONS"
echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
- echo -e " --develop: install OSM from source code using the master branch"
+ echo -e " -b <branch>: install OSM from source code using a specific branch (master, v1.0, ...)"
+ echo -e " -b master"
+ echo -e " -b v1.0"
+ echo -e " ..."
+ echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
echo -e " --nat: install only NAT rules"
+# echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
+ echo -e " --showopts: print chosen options and exit (only for debugging)"
+ echo -e " -y: do not prompt for confirmation, assumes yes"
echo -e " -h / --help: print this help"
}
+#Uninstall OSM: remove containers
+function uninstall(){
+ if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
+ $OSM_DEVOPS/jenkins/host/clean_container RO
+ $OSM_DEVOPS/jenkins/host/clean_container VCA
+ $OSM_DEVOPS/jenkins/host/clean_container SO
+ #$OSM_DEVOPS/jenkins/host/clean_container UI
+ else
+ lxc stop RO && lxc delete RO
+ lxc stop VCA && lxc delete VCA
+ lxc stop SO-ub && lxc delete SO-ub
+ fi
+}
+
+#Configure NAT rules, based on the current IP addresses of containers
+function nat(){
+ echo -e "\nChecking required packages: iptables-persistent"
+ dpkg -l iptables-persistent &>/dev/null || ! echo -e " Not installed.\nInstalling iptables-persistent requires root privileges" || \
+ sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
+ echo -e "\nConfiguring NAT rules"
+ echo -e " Required root privileges"
+ sudo $OSM_DEVOPS/installers/nat_osm
+}
+
+#Update RO, SO and UI:
+function update(){
+ echo -e "\nUpdating components"
+
+ echo -e " Updating RO"
+ CONTAINER="RO"
+ MDG="RO"
+ INSTALL_FOLDER="/opt/openmano"
+ echo -e " Fetching the repo"
+ lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
+ BRANCH=""
+ BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
+ [ -z "$BRANCH" ] && echo " Could not find the current branch in use in the $MDG" && exit 1
+ CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
+ CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
+ echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
+ # COMMIT_ID either was previously set with -b option, or is an empty string
+ CHECKOUT_ID=$COMMIT_ID
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
+ if [[ $CHECKOUT_ID == "tags/"* ]]; then
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
+ else
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
+ fi
+ echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
+ if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
+ echo " Nothing to be done."
+ else
+ echo " Update required."
+ lxc exec $CONTAINER -- service openmano stop
+ lxc exec $CONTAINER -- git -C /opt/openmano stash
+ lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
+ lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
+ lxc exec $CONTAINER -- git -C /opt/openmano stash pop
+ lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
+ lxc exec $CONTAINER -- service openmano start
+ fi
+ echo
+
+ echo -e " Updating SO and UI"
+ CONTAINER="SO-ub"
+ MDG="SO"
+ INSTALL_FOLDER="" # To be filled in
+ echo -e " Fetching the repo"
+ lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
+ BRANCH=""
+ BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
+ [ -z "$BRANCH" ] && echo " Could not find the current branch in use in the $MDG" && exit 1
+ CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
+ CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
+ echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
+ # COMMIT_ID either was previously set with -b option, or is an empty string
+ CHECKOUT_ID=$COMMIT_ID
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
+ [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
+ if [[ $CHECKOUT_ID == "tags/"* ]]; then
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
+ else
+ REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
+ fi
+ echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
+ if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
+ echo " Nothing to be done."
+ else
+ echo " Update required."
+ # Instructions to be added
+ # lxc exec SO-ub -- ...
+ fi
+ echo
+}
+
+#Configure VCA, SO and RO with the initial configuration:
+# RO -> tenant:osm, logs to be sent to SO
+# VCA -> juju-password
+# SO -> route to Juju Controller, add RO account, add VCA account
+function configure(){
+ #Configure components
+ echo -e "\nConfiguring components"
+ . $OSM_DEVOPS/installers/export_ips
+
+ echo -e " Configuring RO"
+ lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /opt/openmano/openmanod.cfg
+ lxc exec RO -- service openmano restart
+ time=0; step=2; timelength=20; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
+ lxc exec RO -- openmano tenant-delete -f osm >/dev/null
+ RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
+
+ echo -e " Configuring VCA"
+ JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
+ echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
+ JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
+
+ echo -e " Configuring SO"
+ sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
+ lxc exec SO-ub -- nohup sudo -b -H /usr/rift/rift-shell -r -i /usr/rift -a /usr/rift/.artifacts -- ./demos/launchpad.py --use-xml-mode &
+ time=0; step=30; timelength=300; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
+
+ curl -k --request POST \
+ --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
+ --header 'accept: application/vnd.yang.data+json' \
+ --header 'authorization: Basic YWRtaW46YWRtaW4=' \
+ --header 'cache-control: no-cache' \
+ --header 'content-type: application/vnd.yang.data+json' \
+ --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" } } ]}'
+
+ curl -k --request PUT \
+ --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
+ --header 'accept: application/vnd.yang.data+json' \
+ --header 'authorization: Basic YWRtaW46YWRtaW4=' \
+ --header 'cache-control: no-cache' \
+ --header 'content-type: application/vnd.yang.data+json' \
+ --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
+
+}
+
+function install_lxd() {
+ lxd init --auto
+ lxd waitready
+ systemctl stop lxd-bridge
+ systemctl --system daemon-reload
+ systemctl enable lxd-bridge
+ systemctl start lxd-bridge
+}
+
+
UNINSTALL=""
DEVELOP=""
NAT=""
-while getopts ":h-:" o; do
+UPDATE=""
+RECONFIGURE=""
+TEST_INSTALLER=""
+LXD=""
+SHOWOPTS=""
+COMMIT_ID=""
+ASSUME_YES=""
+
+while getopts ":hy-:b:" o; do
case "${o}" in
h)
usage && exit 0
;;
+ b)
+ COMMIT_ID=${OPTARG}
+ ;;
-)
[ "${OPTARG}" == "help" ] && usage && exit 0
[ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
[ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
[ "${OPTARG}" == "nat" ] && NAT="y" && continue
+ [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
+ [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
+ [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
+ [ "${OPTARG}" == "lxd" ] && LXD="y" && continue
+ [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
echo -e "Invalid option: '--$OPTARG'\n" >&2
usage && exit 1
;;
echo -e "Invalid option: '-$OPTARG'\n" >&2
usage && exit 1
;;
+ y)
+ ASSUME_YES="y"
+ ;;
*)
usage && exit 1
;;
esac
done
-echo -e "\nCreating temporary dir for OSM installation"
-TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
-trap 'rm -rf "$TEMPDIR"' EXIT
+[ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
+[ -n "$TEST_INSTALLER" ] && [ -z "$COMMIT_ID" ] && echo "Use -b option to specify the branch to use for the test (e.g.: v1.0)" && exit 0
-echo -e "\nCloning devops repo temporarily"
-git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
-RC_CLONE=$?
-OSM_DEVOPS=$TEMPDIR
-OSM_JENKINS="$TEMPDIR/jenkins"
-. $OSM_JENKINS/common/all_funcs
+if [ -n "$TEST_INSTALLER" ]; then
+ echo -e "\nUsing local devops repo for OSM installation"
+ TEMPDIR="$(dirname $(realpath $(dirname $0)))"
+else
+ echo -e "\nCreating temporary dir for OSM installation"
+ TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
+ trap 'rm -rf "$TEMPDIR"' EXIT
+fi
-if [ -n "$UNINSTALL" ]; then
- if [ $RC_CLONE ]; then
- $OSM_DEVOPS/jenkins/host/clean_container RO
- $OSM_DEVOPS/jenkins/host/clean_container VCA
- $OSM_DEVOPS/jenkins/host/clean_container SO
- #$OSM_DEVOPS/jenkins/host/clean_container UI
- else
- lxc stop RO && lxc delete RO
- lxc stop VCA && lxc delete VCA
- lxc stop SO-ub && lxc delete SO-ub
- fi
- exit 0
+echo -e "Checking required packages: git"
+dpkg -l git &>/dev/null || ! echo -e " git not installed.\nInstalling git requires root privileges" || sudo apt install -y git
+if [ -z "$TEST_INSTALLER" ]; then
+ echo -e "\nCloning devops repo temporarily"
+ git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
+ RC_CLONE=$?
fi
-if [ -n "$NAT" ]; then
- sudo $OSM_DEVOPS/installers/nat_osm
+echo -e "\nGuessing the current stable release"
+LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | tail -n1`
+[ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
+
+if [ -n "$SHOWOPTS" ]; then
+ echo "DEVELOP=$DEVELOP"
+ echo "UNINSTALL=$UNINSTALL"
+ echo "NAT=$NAT"
+ echo "UPDATE=$UPDATE"
+ echo "RECONFIGURE=$RECONFIGURE"
+ echo "TEST_INSTALLER=$TEST_INSTALLER"
+ echo "LXD=$LXD"
+ echo "SHOWOPTS=$SHOWOPTS"
+ echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
+ echo "Commit to be installed (-b): $COMMIT_ID"
exit 0
fi
+OSM_DEVOPS=$TEMPDIR
+OSM_JENKINS="$TEMPDIR/jenkins"
+. $OSM_JENKINS/common/all_funcs
+
+[ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
+[ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
+[ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
+[ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
+
#Installation starts here
+if [ -z "$ASSUME_YES" ]; then
+ read -e -p "The installation will take about 75-90 minutes. Continue (Y/n)?" USER_CONFIRMATION
+ [ -n "$USER_CONFIRMATION" ] && [ "$USER_CONFIRMATION" != "yes" ] && \
+ [ "$USER_CONFIRMATION" != "y" ] && echo "Cancelled!" && exit 0
+fi
+
+[ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
+echo -e "\n Installing OSM from refspec: $COMMIT_ID"
+
wget -q -O- https://osm-download.etsi.org/ftp/osm-1.0-one/README.txt &> /dev/null
-echo -e "\nInstalling required packages: git, wget, curl, tar"
-echo -e " Required root privileges"
-sudo apt install -y git wget curl tar
+[ -n "$LXD" ] && echo -e "\nConfiguring lxd" && install_lxd
+
+echo -e "\nChecking required packages: wget, curl, tar"
+dpkg -l wget curl tar &>/dev/null || ! echo -e " One or several packages are not installed.\nInstalling required packages\n Root privileges are required" || sudo apt install -y wget curl tar
echo -e "\nCreating the containers and building ..."
-COMMIT_ID="tags/v1.0"
-#COMMIT_ID="master"
-[ -n "$DEVELOP" ] && COMMIT_ID="master"
-$OSM_DEVOPS/jenkins/host/start_build RO checkout $COMMIT_ID
+$OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID
$OSM_DEVOPS/jenkins/host/start_build VCA
$OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID
$OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID
-#Install iptables-persistent
-echo -e "\nInstalling iptables-persistent"
-echo -e " Required root privileges"
-sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
-
-#Configure NAT rules
-echo -e "\nConfiguring NAT rules"
-echo -e " Required root privileges"
-sudo $OSM_DEVOPS/installers/nat_osm
+#Install iptables-persistent and configure NAT rules
+nat
#Configure components
-echo -e "\nConfiguring components"
-. $OSM_DEVOPS/installers/export_ips
-
-echo -e " Configuring RO"
-lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /opt/openmano/openmanod.cfg
-lxc exec RO -- service openmano restart
-time=0; step=1; timelength=10; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
-RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
-
-echo -e " Configuring VCA"
-JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
-echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
-JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
-
-echo -e " Configuring SO"
-sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
-lxc exec SO-ub -- nohup sudo -b -H /usr/rift/rift-shell -r -i /usr/rift -a /usr/rift/.artifacts -- ./demos/launchpad.py --use-xml-mode
-time=0; step=18; timelength=180; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
-
-curl -k --request POST \
- --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
- --header 'accept: application/vnd.yang.data+json' \
- --header 'authorization: Basic YWRtaW46YWRtaW4=' \
- --header 'cache-control: no-cache' \
- --header 'content-type: application/vnd.yang.data+json' \
- --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" } } ]}'
-
-curl -k --request PUT \
- --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
- --header 'accept: application/vnd.yang.data+json' \
- --header 'authorization: Basic YWRtaW46YWRtaW4=' \
- --header 'cache-control: no-cache' \
- --header 'content-type: application/vnd.yang.data+json' \
- --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
-
+configure
echo -e "\nDONE"
-
-
+wget -q -O- https://osm-download.etsi.org/ftp/osm-1.0-one/README2.txt &> /dev/null