2 # Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
17 echo -e "usage: $0 [OPTIONS]"
18 echo -e "Install OSM from binaries or source code (by default, from binaries)"
20 echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
21 echo -e " --source: install OSM from source code using the latest stable tag"
22 echo -e " -r <repo>: use specified repository name for osm packages"
23 echo -e " -R <release>: use specified release for osm binaries (deb packages, lxd images, ...)"
24 echo -e " -u <repo base>: use specified repository url for osm packages"
25 echo -e " -k <repo key>: use specified repository public key url"
26 echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag"
27 echo -e " -b master (main dev branch)"
28 echo -e " -b v2.0 (v2.0 branch)"
29 echo -e " -b tags/v1.1.0 (a specific tag)"
31 echo -e " --lxdimages: download lxd images from OSM repository instead of creating them from scratch"
32 echo -e " -l <lxd_repo>: use specified repository url for lxd images"
33 echo -e " -p <path>: use specified repository path for lxd images"
34 echo -e " --vimemu: additionally fetch, build, and deploy the VIM emulator as a docker container"
35 echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
36 # echo -e " --reconfigure: reconfigure the modules (DO NOT change NAT rules)"
37 echo -e " --nat: install only NAT rules"
38 echo -e " --noconfigure: DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
39 # echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
40 echo -e " --showopts: print chosen options and exit (only for debugging)"
41 echo -e " -y: do not prompt for confirmation, assumes yes"
42 echo -e " -h / --help: print this help"
45 #Uninstall OSM: remove containers
47 echo -e "\nUninstalling OSM"
48 if [ $RC_CLONE ] ||
[ -n "$TEST_INSTALLER" ]; then
49 $OSM_DEVOPS/jenkins
/host
/clean_container RO
50 $OSM_DEVOPS/jenkins
/host
/clean_container VCA
51 $OSM_DEVOPS/jenkins
/host
/clean_container MON
52 $OSM_DEVOPS/jenkins
/host
/clean_container SO
53 #$OSM_DEVOPS/jenkins/host/clean_container UI
55 lxc stop RO
&& lxc delete RO
56 lxc stop VCA
&& lxc delete VCA
57 lxc stop MON
&& lxc delete MON
58 lxc stop SO-ub
&& lxc delete SO-ub
60 echo -e "\nDeleting imported lxd images if they exist"
61 lxc image show osm-ro
&>/dev
/null
&& lxc image delete osm-ro
62 lxc image show osm-vca
&>/dev
/null
&& lxc image delete osm-vca
63 lxc image show osm-soui
&>/dev
/null
&& lxc image delete osm-soui
67 #Configure NAT rules, based on the current IP addresses of containers
69 echo -e "\nChecking required packages: iptables-persistent"
70 dpkg
-l iptables-persistent
&>/dev
/null ||
! echo -e " Not installed.\nInstalling iptables-persistent requires root privileges" || \
71 sudo DEBIAN_FRONTEND
=noninteractive apt-get
-yq install iptables-persistent
72 echo -e "\nConfiguring NAT rules"
73 echo -e " Required root privileges"
74 sudo
$OSM_DEVOPS/installers
/nat_osm
78 echo "FATAL error: Cannot install OSM due to \"$1\""
82 #Update RO, SO and UI:
84 echo -e "\nUpdating components"
86 echo -e " Updating RO"
89 INSTALL_FOLDER
="/opt/openmano"
90 echo -e " Fetching the repo"
91 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
93 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
94 [ -z "$BRANCH" ] && FATAL
"Could not find the current branch in use in the '$MDG'"
95 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
96 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
97 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
98 # COMMIT_ID either was previously set with -b option, or is an empty string
99 CHECKOUT_ID
=$COMMIT_ID
100 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
101 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
102 if [[ $CHECKOUT_ID == "tags/"* ]]; then
103 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
105 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
107 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
108 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
109 echo " Nothing to be done."
111 echo " Update required."
112 lxc
exec $CONTAINER -- service osm-ro stop
113 lxc
exec $CONTAINER -- git
-C /opt
/openmano stash
114 lxc
exec $CONTAINER -- git
-C /opt
/openmano pull
--rebase
115 lxc
exec $CONTAINER -- git
-C /opt
/openmano checkout
$CHECKOUT_ID
116 lxc
exec $CONTAINER -- git
-C /opt
/openmano stash pop
117 lxc
exec $CONTAINER -- /opt
/openmano
/database_utils
/migrate_mano_db.sh
118 lxc
exec $CONTAINER -- service osm-ro start
122 echo -e " Updating SO and UI"
125 INSTALL_FOLDER
="" # To be filled in
126 echo -e " Fetching the repo"
127 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
129 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
130 [ -z "$BRANCH" ] && FATAL
"Could not find the current branch in use in the '$MDG'"
131 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
132 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
133 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
134 # COMMIT_ID either was previously set with -b option, or is an empty string
135 CHECKOUT_ID
=$COMMIT_ID
136 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
137 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
138 if [[ $CHECKOUT_ID == "tags/"* ]]; then
139 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
141 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
143 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
144 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
145 echo " Nothing to be done."
147 echo " Update required."
148 # Instructions to be added
149 # lxc exec SO-ub -- ...
152 echo -e "Updating MON Container"
155 INSTALL_FOLDER
="/root/MON"
156 echo -e " Fetching the repo"
157 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
159 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
160 [ -z "$BRANCH" ] && FATAL
"Could not find the current branch in use in the '$MDG'"
161 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
162 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
163 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
164 # COMMIT_ID either was previously set with -b option, or is an empty string
165 CHECKOUT_ID
=$COMMIT_ID
166 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
167 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
168 if [[ $CHECKOUT_ID == "tags/"* ]]; then
169 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
171 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
173 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
174 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
175 echo " Nothing to be done."
177 echo " Update required."
182 function so_is_up
() {
186 SO_IP
=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
191 while [ $time -le $timelength ]
193 if [[ `curl -k -X GET https://$SO_IP:8008/api/operational/vcs/info \
194 -H 'accept: application/vnd.yang.data+json' \
195 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
196 -H 'cache-control: no-cache' 2> /dev/null | jq '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
198 echo "RW.Restconf running....SO is up"
207 FATAL
"OSM Failed to startup. SO failed to startup"
210 function vca_is_up
() {
211 if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
212 echo "VCA is up and running"
216 FATAL
"OSM Failed to startup. VCA failed to startup"
219 function mon_is_up
() {
220 if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
221 echo "MON is up and running"
225 FATAL
"OSM Failed to startup. MON failed to startup"
228 function ro_is_up
() {
232 RO_IP
=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
237 while [ $time -le $timelength ]; do
238 if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
239 echo "RO is up and running"
247 FATAL
"OSM Failed to startup. RO failed to startup"
251 function configure_RO
(){
252 .
$OSM_DEVOPS/installers
/export_ips
253 echo -e " Configuring RO"
254 lxc
exec RO
-- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc
/osm
/openmanod.cfg
255 lxc
exec RO
-- service osm-ro restart
259 lxc
exec RO
-- openmano tenant-delete
-f osm
>/dev
/null
261 lxc exec RO -- openmano tenant-create osm > /dev/null
262 lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
264 lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
265 >>>>>>> MON Installation Changes Updated.
266 lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
267 lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
270 function configure_VCA(){
271 echo -e " Configuring VCA"
272 JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
273 echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
276 function configure_SOUI(){
277 . $OSM_DEVOPS/installers/export_ips
278 JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
279 RO_TENANT_ID=`lxc exec RO -- openmano tenant-list osm |awk '{print $1}'`
281 echo -e " Configuring MON"
282 #Information to be added about SO socket for logging
284 echo -e " Configuring SO"
285 sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
286 sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
287 # make journaling persistent
288 lxc exec SO-ub -- mkdir -p /var/log/journal
289 lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
290 lxc exec SO-ub -- systemctl restart systemd-journald
292 echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
294 lxc exec SO-ub -- systemctl restart launchpad
296 so_is_up $SO_CONTAINER_IP
298 #delete existing config agent (could be there on reconfigure)
299 curl -k --request DELETE \
300 --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
301 --header 'accept: application/vnd.yang.data+json' \
302 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
303 --header 'cache-control: no-cache' \
304 --header 'content-type: application/vnd.yang.data+json' &> /dev/null
306 result=$(curl -k --request POST \
307 --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
308 --header 'accept: application/vnd.yang.data+json' \
309 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
310 --header 'cache-control: no-cache' \
311 --header 'content-type: application/vnd.yang.data+json' \
312 --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" } } ]}')
313 [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
316 #result=$(curl -k --request PUT \
317 # --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
318 # --header 'accept: application/vnd.yang.data+json' \
319 # --header 'authorization: Basic YWRtaW46YWRtaW4=' \
320 # --header 'cache-control: no-cache' \
321 # --header 'content-type: application/vnd.yang.data+json' \
322 # --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
324 result=$(curl -k --request PUT \
325 --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
326 --header 'accept: application/vnd.yang.data+json' \
327 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
328 --header 'cache-control: no-cache' \
329 --header 'content-type: application/vnd.yang.data+json' \
330 --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
331 [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
333 result=$(curl -k --request PATCH \
334 --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
335 --header 'accept: application/vnd.yang.data+json' \
336 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
337 --header 'cache-control: no-cache' \
338 --header 'content-type: application/vnd.yang.data+json' \
339 --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
340 [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
342 result=$(curl -k --request PATCH \
343 --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
344 --header 'accept: application/vnd.yang.data+json' \
345 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
346 --header 'cache-control: no-cache' \
347 --header 'content-type: application/vnd.yang.data+json' \
348 --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
349 [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
351 lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
353 iface lo:1 inet static
355 netmask 255.255.255.255
357 lxc exec SO-ub ifup lo:1
360 #Configure RO, VCA, and SO with the initial configuration:
361 # RO -> tenant:osm, logs to be sent to SO
362 # VCA -> juju-password
363 # SO -> route to Juju Controller, add RO account, add VCA account
364 function configure(){
365 #Configure components
366 echo -e "\nConfiguring components"
372 function install_lxd() {
374 sudo apt-get install -y lxd
378 lxc network create lxdbr0 ipv4.address=auto ipv4.nat=true ipv6.address=none ipv6.nat=false
379 DEFAULT_INTERFACE=$(route -n | awk '$1~/^0.0.0.0/ {print $8}')
380 DEFAULT_MTU=$( ip addr show $DEFAULT_INTERFACE | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
381 lxc profile device set default eth0 mtu $DEFAULT_MTU
382 #sudo systemctl stop lxd-bridge
383 #sudo systemctl --system daemon-reload
384 #sudo systemctl enable lxd-bridge
385 #sudo systemctl start lxd-bridge
389 # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
390 # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
391 # Return: true(0) if user type 'yes'; false (1) if user type 'no'
392 read -e -p "$1" USER_CONFIRMATION
394 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
395 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
396 [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
397 [ "${USER_CONFIRMATION,,}" == "no" ] || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
398 read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
402 function launch_container_from_lxd(){
405 export OSM_BASE_IMAGE=$2
406 if ! container_exists $OSM_BUILD_CONTAINER; then
408 [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.privileged=true"
409 [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.nesting=true"
410 create_container $OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
411 wait_container_up $OSM_BUILD_CONTAINER
415 function install_osmclient(){
416 CLIENT_RELEASE=${RELEASE#"-R "}
417 CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
418 CLIENT_REPOSITORY="stable"
419 [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE="-u https://osm-download.etsi.org/repository/osm/debian"
420 CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
421 key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
422 curl $key_location | sudo apt-key add -
423 sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
425 sudo apt-get install -y python-osmclient
426 export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
427 export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
428 echo -e "\nOSM client installed"
429 echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
430 echo " export OSM_HOSTNAME=${OSM_HOSTNAME}"
431 echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
434 function install_from_lxdimages(){
435 LXD_RELEASE=${RELEASE#"-R "}
436 if [ -n "$LXD_REPOSITORY_PATH" ]; then
437 LXD_IMAGE_DIR="$LXD_REPOSITORY_PATH"
439 LXD_IMAGE_DIR="$(mktemp -d -q --tmpdir "osmimages.XXXXXX")"
440 trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
442 echo -e "\nDeleting previous lxd images if they exist"
443 lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
444 lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
445 lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
446 echo -e "\nImporting osm-ro"
447 [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-ro.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.tar.gz
448 lxc image import $LXD_IMAGE_DIR/osm-ro.tar.gz --alias osm-ro
449 rm -f $LXD_IMAGE_DIR/osm-ro.tar.gz
450 echo -e "\nImporting osm-vca"
451 [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-vca.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.tar.gz
452 lxc image import $LXD_IMAGE_DIR/osm-vca.tar.gz --alias osm-vca
453 rm -f $LXD_IMAGE_DIR/osm-vca.tar.gz
454 echo -e "\nImporting osm-soui"
455 [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-soui.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.tar.gz
456 lxc image import $LXD_IMAGE_DIR/osm-soui.tar.gz --alias osm-soui
457 rm -f $LXD_IMAGE_DIR/osm-soui.tar.gz
458 launch_container_from_lxd RO osm-ro
460 launch_container_from_lxd VCA osm-vca
461 vca_is_up && track VCA
462 launch_container_from_lxd MON osm-mon
463 mon_is_up && track MON
464 launch_container_from_lxd SO osm-soui
465 #so_is_up && track SOUI
469 function install_docker_ce() {
470 # installs and configures Docker CE
471 echo "Installing Docker CE ..."
472 sudo apt-get -qq update
473 sudo apt-get install -y apt-transport-https ca-certificates software-properties-common
474 curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
475 sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
476 sudo apt-get -qq update
477 sudo apt-get install -y docker-ce
478 echo "Adding user to group 'docker'"
479 sudo groupadd -f docker
480 sudo usermod -aG docker $USER
481 echo "... Docker CE installation done"
483 sudo service docker restart
484 echo "... restarted Docker service"
487 function install_vimemu() {
490 # clone vim-emu repository (attention: branch is currently master only)
491 echo "Cloning vim-emu repository ..."
492 git clone https://osm.etsi.org/gerrit/osm/vim-emu.git
493 # build vim-emu docker
494 echo "Building vim-emu Docker container..."
495 sudo docker build -t vim-emu-img -f vim-emu/Dockerfile vim-emu/
496 # start vim-emu container as daemon
497 echo "Starting vim-emu Docker container 'vim-emu' ..."
498 sudo docker run --name vim-emu -t -d --rm --privileged --pid='host' -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
499 echo "Waiting for 'vim-emu' container to start ..."
501 export VIMEMU_HOSTNAME=$(sudo docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vim-emu)
502 echo "vim-emu running at $VIMEMU_HOSTNAME ..."
503 echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
504 echo " export OSM_HOSTNAME=${OSM_HOSTNAME}"
505 echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
506 echo -e "You might be interested in adding the following vim-emu env variables to your .bashrc file:"
507 echo " export VIMEMU_HOSTNAME=${VIMEMU_HOSTNAME}"
508 echo -e "\nTo add the emulated VIM to OSM you should do:"
509 echo " osm vim-create --name emu-vim1 --user username --password password --auth_url http://$VIMEMU_HOSTNAME:6001/v2.0 --tenant tenantName --account_type openstack"
512 function dump_vars(){
513 echo "DEVELOP=$DEVELOP"
514 echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
515 echo "UNINSTALL=$UNINSTALL"
517 echo "UPDATE=$UPDATE"
518 echo "RECONFIGURE=$RECONFIGURE"
519 echo "TEST_INSTALLER=$TEST_INSTALLER"
520 echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
521 echo "INSTALL_LXD=$INSTALL_LXD"
522 echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
523 echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
524 echo "LXD_REPOSITORY_PATH=$LXD_REPOSITORY_PATH"
525 echo "RELEASE=$RELEASE"
526 echo "REPOSITORY=$REPOSITORY"
527 echo "REPOSITORY_BASE=$REPOSITORY_BASE"
528 echo "REPOSITORY_KEY=$REPOSITORY_KEY"
529 echo "NOCONFIGURE=$NOCONFIGURE"
530 echo "SHOWOPTS=$SHOWOPTS"
531 echo "Install from specific refspec (-b): $COMMIT_ID"
536 duration=$((ctime - SESSION_ID))
537 url="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
538 #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
540 [ -n "$INSTALL_FROM_SOURCE" ] && event_name="src"
541 [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name="lxd"
542 event_name="${event_name}_$1"
543 url="${url}&event=${event_name}&ce_duration=${duration}"
544 wget -q -O /dev/null $url
557 INSTALL_FROM_SOURCE=""
558 RELEASE="-R ReleaseTHREE"
560 INSTALL_FROM_LXDIMAGES=""
561 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
562 LXD_REPOSITORY_PATH=""
565 SESSION_ID=`date +%s`
567 while getopts ":hy-:b:r:k:u:R:l:p:" o; do
576 REPOSITORY="-r ${OPTARG}"
579 RELEASE="-R ${OPTARG}"
582 REPOSITORY_KEY="-k ${OPTARG}"
585 REPOSITORY_BASE="-u ${OPTARG}"
588 LXD_REPOSITORY_BASE="${OPTARG}"
591 LXD_REPOSITORY_PATH="${OPTARG}"
594 [ "${OPTARG}" == "help" ] && usage && exit 0
595 [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
596 [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
597 [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
598 [ "${OPTARG}" == "nat" ] && NAT="y" && continue
599 [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
600 [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
601 [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
602 [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
603 [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES="y" && continue
604 [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
605 [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE="y" && continue
606 [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
607 [ "${OPTARG}" == "daily" ] && RELEASE_DAILY="y" && continue
608 echo -e "Invalid option: '--$OPTARG'\n" >&2
612 echo -e "Invalid option: '-$OPTARG'\n" >&2
624 if [ -n "$SHOWOPTS" ]; then
629 [ -n "$RELEASE_DAILY" ] && echo -e "\nInstalling from daily build repo" && RELEASE="-R ReleaseTHREE-daily" && REPOSITORY="-r testing" && COMMIT_ID="master"
631 # if develop, we force master
632 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
634 # forcing source from master removed. Now only install from source when explicit
635 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
637 if [ -n "$TEST_INSTALLER" ]; then
638 echo -e "\nUsing local devops repo for OSM installation"
639 TEMPDIR="$(dirname $(realpath $(dirname $0)))"
641 echo -e "\nCreating temporary dir for OSM installation"
642 TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
643 trap 'rm -rf "$TEMPDIR"' EXIT
646 need_packages="git jq"
647 for package in $need_packages; do
648 echo -e "Checking required packages: $package"
649 dpkg -l $package &>/dev/null \
650 || ! echo -e " $package not installed.\nInstalling $package requires root privileges" \
651 || sudo apt-get install -y $package \
652 || FATAL "failed to install $package"
655 if [ -z "$TEST_INSTALLER" ]; then
656 echo -e "\nCloning devops repo temporarily"
657 git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
661 echo -e "\nGuessing the current stable release"
662 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
663 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
664 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
665 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
667 if [ -n "$RELEASE_DAILY" ]; then
668 echo "Using master/HEAD devops
"
669 git -C $TEMPDIR checkout master
670 elif [ -z "$TEST_INSTALLER" ]; then
671 git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
675 OSM_JENKINS="$TEMPDIR/jenkins
"
676 . $OSM_JENKINS/common/all_funcs
678 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE
" && exit 0
679 [ -n "$NAT" ] && nat && echo -e "\nDONE
" && exit 0
680 [ -n "$UPDATE" ] && update && echo -e "\nDONE
" && exit 0
681 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE
" && exit 0
683 #Installation starts here
684 echo -e "\nInstalling OSM from refspec
: $COMMIT_ID"
685 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
686 ! ask_user "The installation will take about
75-90 minutes. Continue
(Y
/n
)?
" y && echo "Cancelled
!" && exit 1
689 echo -e "\nChecking required packages
: wget
, curl
, tar"
690 dpkg -l wget curl tar &>/dev/null || ! echo -e " One or several packages are not installed.
\nInstalling required packages
\n Root privileges are required
" || sudo apt-get install -y wget curl tar
692 echo -e "Checking required packages
: lxd
"
693 lxd --version &>/dev/null || FATAL "lxd not present
, exiting.
"
694 [ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd
" && install_lxd
696 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README.txt &> /dev/null
699 # use local devops for containers
700 export OSM_USE_LOCAL_DEVOPS=true
701 if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
702 echo -e "\nCreating the containers and building from
source ...
"
703 $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed
(refspec
: '$COMMIT_ID')"
705 $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed
"
706 vca_is_up && track VCA
707 $OSM_DEVOPS/jenkins/host/start_build MON || FATAL "MON
install failed
"
708 mon_is_up && track MON
709 $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed
(refspec
: '$COMMIT_ID')"
710 $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed
(refspec
: '$COMMIT_ID')"
711 #so_is_up && track SOUI
713 elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
714 echo -e "\nInstalling from lxd images ...
"
715 install_from_lxdimages
716 else #install from binaries
717 echo -e "\nCreating the containers and installing from binaries ...
"
718 $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO
install failed
"
720 $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA
install failed
"
721 vca_is_up && track VCA
722 $OSM_DEVOPS/jenkins/host/install MON || FATAL "MON build failed
"
723 mon_is_up && track MON
724 $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO
install failed
"
725 $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI
install failed
"
726 #so_is_up && track SOUI
730 #Install iptables-persistent and configure NAT rules
731 [ -z "$NOCONFIGURE" ] && nat
733 #Configure components
734 [ -z "$NOCONFIGURE" ] && configure
737 [ -z "$NOCONFIGURE" ] && install_osmclient
739 #Install vim-emu (optional)
740 if [ -n "$INSTALL_VIMEMU" ]; then
741 echo -e "\nInstalling vim-emu ...
"
745 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README2.txt &> /dev/null