installers/install_osm.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  19     echo -e "  OPTIONS"
  20     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  21     echo -e "     --source:       install OSM from source code using the latest stable tag"
  22     echo -e "     -r <repo>:      use specified repository name for osm packages"
  23     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  24     echo -e "     -u <repo base>: use specified repository url for osm packages"
  25     echo -e "     -k <repo key>:  use specified repository public key url"
  26     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  27     echo -e "                     -b master          (main dev branch)"
  28     echo -e "                     -b v2.0            (v2.0 branch)"
  29     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  30     echo -e "                     ..."
  31     echo -e "     --lxdimages:    download lxd images from OSM repository instead of creating them from scratch"
  32     echo -e "     -l <lxd_repo>:  use specified repository url for lxd images"
  33     echo -e "     -p <path>:      use specified repository path for lxd images"
  34     echo -e "     --vimemu:       additionally fetch, build, and deploy the VIM emulator as a docker container"
  35     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  36 #    echo -e "     --reconfigure:  reconfigure the modules (DO NOT change NAT rules)"
  37     echo -e "     --nat:          install only NAT rules"
  38     echo -e "     --noconfigure:  DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
  39 #    echo -e "     --update:       update to the latest stable release or to the latest commit if using a specific branch"
  40     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  41     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  42     echo -e "     -h / --help:    print this help"
  43 }
  44
  45 #Uninstall OSM: remove containers
  46 function uninstall(){
  47     echo -e "\nUninstalling OSM"
  48     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  49         $OSM_DEVOPS/jenkins/host/clean_container RO
  50         $OSM_DEVOPS/jenkins/host/clean_container VCA
  51         $OSM_DEVOPS/jenkins/host/clean_container MON
  52         $OSM_DEVOPS/jenkins/host/clean_container SO
  53         #$OSM_DEVOPS/jenkins/host/clean_container UI
  54     else
  55         lxc stop RO && lxc delete RO
  56         lxc stop VCA && lxc delete VCA
  57         lxc stop MON && lxc delete MON
  58         lxc stop SO-ub && lxc delete SO-ub
  59     fi
  60     echo -e "\nDeleting imported lxd images if they exist"
  61     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
  62     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
  63     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
  64     return 0
  65 }
  66
  67 #Configure NAT rules, based on the current IP addresses of containers
  68 function nat(){
  69     echo -e "\nChecking required packages: iptables-persistent"
  70     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
  71     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
  72     echo -e "\nConfiguring NAT rules"
  73     echo -e "   Required root privileges"
  74     sudo $OSM_DEVOPS/installers/nat_osm
  75 }
  76
  77 function FATAL(){
  78     echo "FATAL error: Cannot install OSM due to \"$1\""
  79     exit 1
  80 }
  81
  82 #Update RO, SO and UI:
  83 function update(){
  84     echo -e "\nUpdating components"
  85
  86     echo -e "     Updating RO"
  87     CONTAINER="RO"
  88     MDG="RO"
  89     INSTALL_FOLDER="/opt/openmano"
  90     echo -e "     Fetching the repo"
  91     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
  92     BRANCH=""
  93     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
  94     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
  95     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
  96     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
  97     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
  98     # COMMIT_ID either was  previously set with -b option, or is an empty string
  99     CHECKOUT_ID=$COMMIT_ID
 100     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 101     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 102     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 103         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 104     else
 105         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 106     fi
 107     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 108     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 109         echo "         Nothing to be done."
 110     else
 111         echo "         Update required."
 112         lxc exec $CONTAINER -- service osm-ro stop
 113         lxc exec $CONTAINER -- git -C /opt/openmano stash
 114         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
 115         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
 116         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
 117         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
 118         lxc exec $CONTAINER -- service osm-ro start
 119     fi
 120     echo
 121
 122     echo -e "     Updating SO and UI"
 123     CONTAINER="SO-ub"
 124     MDG="SO"
 125     INSTALL_FOLDER=""   # To be filled in
 126     echo -e "     Fetching the repo"
 127     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 128     BRANCH=""
 129     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 130     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 131     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 132     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 133     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 134     # COMMIT_ID either was  previously set with -b option, or is an empty string
 135     CHECKOUT_ID=$COMMIT_ID
 136     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 137     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 138     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 139         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 140     else
 141         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 142     fi
 143     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 144     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 145         echo "         Nothing to be done."
 146     else
 147         echo "         Update required."
 148         # Instructions to be added
 149         # lxc exec SO-ub -- ...
 150     fi
 151     echo
 152     echo -e "Updating MON Container"
 153     CONTAINER="MON"
 154     MDG="MON"
 155     INSTALL_FOLDER="/root/MON"
 156     echo -e "     Fetching the repo"
 157     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 158     BRANCH=""
 159     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 160     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 161     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 162     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 163     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 164     # COMMIT_ID either was  previously set with -b option, or is an empty string
 165     CHECKOUT_ID=$COMMIT_ID
 166     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 167     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 168     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 169         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 170     else
 171         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 172     fi
 173     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 174     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 175         echo "         Nothing to be done."
 176     else
 177         echo "         Update required."
 178     fi
 179     echo
 180 }
 181
 182 function so_is_up() {
 183     if [ -n "$1" ]; then
 184         SO_IP=$1
 185     else
 186         SO_IP=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
 187     fi
 188     time=0
 189     step=5
 190     timelength=300
 191     while [ $time -le $timelength ]
 192     do
 193         if [[ `curl -k -X GET   https://$SO_IP:8008/api/operational/vcs/info \
 194                 -H 'accept: application/vnd.yang.data+json' \
 195                 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
 196                 -H 'cache-control: no-cache' 2> /dev/null | jq  '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
 197         then
 198             echo "RW.Restconf running....SO is up"
 199             return 0
 200         fi
 201
 202         sleep $step
 203         echo -n "."
 204         time=$((time+step))
 205     done
 206
 207     FATAL "OSM Failed to startup. SO failed to startup"
 208 }
 209
 210 function vca_is_up() {
 211     if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
 212             echo "VCA is up and running"
 213             return 0
 214     fi
 215
 216     FATAL "OSM Failed to startup. VCA failed to startup"
 217 }
 218
 219 function mon_is_up() {
 220     if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
 221             echo "MON is up and running"
 222             return 0
 223     fi
 224
 225     FATAL "OSM Failed to startup. MON failed to startup"
 226 }
 227
 228 function ro_is_up() {
 229     if [ -n "$1" ]; then
 230         RO_IP=$1
 231     else
 232         RO_IP=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
 233     fi
 234     time=0
 235     step=2
 236     timelength=20
 237     while [ $time -le $timelength ]; do
 238         if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
 239             echo "RO is up and running"
 240             return 0
 241         fi
 242         sleep $step
 243         echo -n "."
 244         time=$((time+step))
 245     done
 246
 247     FATAL "OSM Failed to startup. RO failed to startup"
 248 }
 249
 250
 251 function configure_RO(){
 252     . $OSM_DEVOPS/installers/export_ips
 253     echo -e "       Configuring RO"
 254     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
 255     lxc exec RO -- service osm-ro restart
 256
 257     ro_is_up
 258
 259     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 260 <<<<<<< HEAD
 261     lxc exec RO -- openmano tenant-create osm > /dev/null
 262     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 263 =======
 264     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 265 >>>>>>> MON Installation Changes Updated.
 266     lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
 267     lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
 268 }
 269
 270 function configure_VCA(){
 271     echo -e "       Configuring VCA"
 272     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 273     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 274 }
 275
 276 function configure_SOUI(){
 277     . $OSM_DEVOPS/installers/export_ips
 278     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 279     RO_TENANT_ID=`lxc exec RO -- openmano tenant-list osm |awk '{print $1}'`
 280
 281     echo -e " Configuring MON"
 282     #Information to be added about SO socket for logging
 283
 284     echo -e "       Configuring SO"
 285     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 286     sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
 287     # make journaling persistent
 288     lxc exec SO-ub -- mkdir -p /var/log/journal
 289     lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
 290     lxc exec SO-ub -- systemctl restart systemd-journald
 291
 292     echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
 293
 294     lxc exec SO-ub -- systemctl restart launchpad
 295
 296     so_is_up $SO_CONTAINER_IP
 297
 298     #delete existing config agent (could be there on reconfigure)
 299     curl -k --request DELETE \
 300       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
 301       --header 'accept: application/vnd.yang.data+json' \
 302       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 303       --header 'cache-control: no-cache' \
 304       --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 305
 306     result=$(curl -k --request POST \
 307       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 308       --header 'accept: application/vnd.yang.data+json' \
 309       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 310       --header 'cache-control: no-cache' \
 311       --header 'content-type: application/vnd.yang.data+json' \
 312       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
 313     [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
 314
 315     #R1/R2 config line
 316     #result=$(curl -k --request PUT \
 317     #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 318     #  --header 'accept: application/vnd.yang.data+json' \
 319     #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 320     #  --header 'cache-control: no-cache' \
 321     #  --header 'content-type: application/vnd.yang.data+json' \
 322     #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
 323
 324     result=$(curl -k --request PUT \
 325       --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
 326       --header 'accept: application/vnd.yang.data+json' \
 327       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 328       --header 'cache-control: no-cache'   \
 329       --header 'content-type: application/vnd.yang.data+json' \
 330       --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
 331     [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
 332
 333     result=$(curl -k --request PATCH \
 334       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
 335       --header 'accept: application/vnd.yang.data+json' \
 336       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 337       --header 'cache-control: no-cache'   \
 338       --header 'content-type: application/vnd.yang.data+json' \
 339       --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
 340     [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
 341
 342     result=$(curl -k --request PATCH \
 343       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
 344       --header 'accept: application/vnd.yang.data+json' \
 345       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 346       --header 'cache-control: no-cache'   \
 347       --header 'content-type: application/vnd.yang.data+json' \
 348       --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
 349     [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
 350
 351     lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
 352 auto lo:1
 353 iface lo:1 inet static
 354         address  $DEFAULT_IP
 355         netmask 255.255.255.255
 356 EOF
 357     lxc exec SO-ub ifup lo:1
 358 }
 359
 360 #Configure RO, VCA, and SO with the initial configuration:
 361 #  RO -> tenant:osm, logs to be sent to SO
 362 #  VCA -> juju-password
 363 #  SO -> route to Juju Controller, add RO account, add VCA account
 364 function configure(){
 365     #Configure components
 366     echo -e "\nConfiguring components"
 367     configure_RO
 368     configure_VCA
 369     configure_SOUI
 370 }
 371
 372 function install_lxd() {
 373     sudo apt-get update
 374     sudo apt-get install -y lxd
 375     newgrp lxd
 376     lxd init --auto
 377     lxd waitready
 378     lxc network create lxdbr0 ipv4.address=auto ipv4.nat=true ipv6.address=none ipv6.nat=false
 379     DEFAULT_INTERFACE=$(route -n | awk '$1~/^0.0.0.0/ {print $8}')
 380     DEFAULT_MTU=$( ip addr show $DEFAULT_INTERFACE | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
 381     lxc profile device set default eth0 mtu $DEFAULT_MTU
 382     #sudo systemctl stop lxd-bridge
 383     #sudo systemctl --system daemon-reload
 384     #sudo systemctl enable lxd-bridge
 385     #sudo systemctl start lxd-bridge
 386 }
 387
 388 function ask_user(){
 389     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 390     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 391     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 392     read -e -p "$1" USER_CONFIRMATION
 393     while true ; do
 394         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 395         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 396         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 397         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 398         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 399     done
 400 }
 401
 402 function launch_container_from_lxd(){
 403     export OSM_MDG=$1
 404     OSM_load_config
 405     export OSM_BASE_IMAGE=$2
 406     if ! container_exists $OSM_BUILD_CONTAINER; then
 407         CONTAINER_OPTS=""
 408         [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.privileged=true"
 409         [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.nesting=true"
 410         create_container $OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
 411         wait_container_up $OSM_BUILD_CONTAINER
 412     fi
 413 }
 414
 415 function install_osmclient(){
 416     CLIENT_RELEASE=${RELEASE#"-R "}
 417     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 418     CLIENT_REPOSITORY="stable"
 419     [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE="-u https://osm-download.etsi.org/repository/osm/debian"
 420     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 421     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 422     curl $key_location | sudo apt-key add -
 423     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
 424     sudo apt-get update
 425     sudo apt-get install -y python-osmclient
 426     export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 427     export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 428     echo -e "\nOSM client installed"
 429     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 430     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 431     echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 432 }
 433
 434 function install_from_lxdimages(){
 435     LXD_RELEASE=${RELEASE#"-R "}
 436     if [ -n "$LXD_REPOSITORY_PATH" ]; then
 437         LXD_IMAGE_DIR="$LXD_REPOSITORY_PATH"
 438     else
 439         LXD_IMAGE_DIR="$(mktemp -d -q --tmpdir "osmimages.XXXXXX")"
 440         trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
 441     fi
 442     echo -e "\nDeleting previous lxd images if they exist"
 443     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
 444     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
 445     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
 446     echo -e "\nImporting osm-ro"
 447     [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-ro.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.tar.gz
 448     lxc image import $LXD_IMAGE_DIR/osm-ro.tar.gz --alias osm-ro
 449     rm -f $LXD_IMAGE_DIR/osm-ro.tar.gz
 450     echo -e "\nImporting osm-vca"
 451     [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-vca.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.tar.gz
 452     lxc image import $LXD_IMAGE_DIR/osm-vca.tar.gz --alias osm-vca
 453     rm -f $LXD_IMAGE_DIR/osm-vca.tar.gz
 454     echo -e "\nImporting osm-soui"
 455     [ -z "$LXD_REPOSITORY_PATH" ] && wget -O $LXD_IMAGE_DIR/osm-soui.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.tar.gz
 456     lxc image import $LXD_IMAGE_DIR/osm-soui.tar.gz --alias osm-soui
 457     rm -f $LXD_IMAGE_DIR/osm-soui.tar.gz
 458     launch_container_from_lxd RO osm-ro
 459     ro_is_up && track RO
 460     launch_container_from_lxd VCA osm-vca
 461     vca_is_up && track VCA
 462     launch_container_from_lxd MON osm-mon
 463     mon_is_up && track MON
 464     launch_container_from_lxd SO osm-soui
 465     #so_is_up && track SOUI
 466     track SOUI
 467 }
 468
 469 function install_docker_ce() {
 470     # installs and configures Docker CE
 471     echo "Installing Docker CE ..."
 472     sudo apt-get -qq update
 473     sudo apt-get install -y apt-transport-https ca-certificates software-properties-common
 474     curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
 475     sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
 476     sudo apt-get -qq update
 477     sudo apt-get install -y docker-ce
 478     echo "Adding user to group 'docker'"
 479     sudo groupadd -f docker
 480     sudo usermod -aG docker $USER
 481     echo "... Docker CE installation done"
 482     sleep 2
 483     sudo service docker restart
 484     echo "... restarted Docker service"
 485 }
 486
 487 function install_vimemu() {
 488     # install Docker
 489     install_docker_ce
 490     # clone vim-emu repository (attention: branch is currently master only)
 491     echo "Cloning vim-emu repository ..."
 492     git clone https://osm.etsi.org/gerrit/osm/vim-emu.git
 493     # build vim-emu docker
 494     echo "Building vim-emu Docker container..."
 495     sudo docker build -t vim-emu-img -f vim-emu/Dockerfile vim-emu/
 496     # start vim-emu container as daemon
 497     echo "Starting vim-emu Docker container 'vim-emu' ..."
 498     sudo docker run --name vim-emu -t -d --rm --privileged --pid='host' -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
 499     echo "Waiting for 'vim-emu' container to start ..."
 500     sleep 5
 501     export VIMEMU_HOSTNAME=$(sudo docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vim-emu)
 502     echo "vim-emu running at $VIMEMU_HOSTNAME ..."
 503     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 504     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 505     echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 506     echo -e "You might be interested in adding the following vim-emu env variables to your .bashrc file:"
 507     echo "     export VIMEMU_HOSTNAME=${VIMEMU_HOSTNAME}"
 508     echo -e "\nTo add the emulated VIM to OSM you should do:"
 509     echo "     osm vim-create --name emu-vim1 --user username --password password --auth_url http://$VIMEMU_HOSTNAME:6001/v2.0 --tenant tenantName --account_type openstack"
 510 }
 511
 512 function dump_vars(){
 513     echo "DEVELOP=$DEVELOP"
 514     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 515     echo "UNINSTALL=$UNINSTALL"
 516     echo "NAT=$NAT"
 517     echo "UPDATE=$UPDATE"
 518     echo "RECONFIGURE=$RECONFIGURE"
 519     echo "TEST_INSTALLER=$TEST_INSTALLER"
 520     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 521     echo "INSTALL_LXD=$INSTALL_LXD"
 522     echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
 523     echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
 524     echo "LXD_REPOSITORY_PATH=$LXD_REPOSITORY_PATH"
 525     echo "RELEASE=$RELEASE"
 526     echo "REPOSITORY=$REPOSITORY"
 527     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 528     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 529     echo "NOCONFIGURE=$NOCONFIGURE"
 530     echo "SHOWOPTS=$SHOWOPTS"
 531     echo "Install from specific refspec (-b): $COMMIT_ID"
 532 }
 533
 534 function track(){
 535     ctime=`date +%s`
 536     duration=$((ctime - SESSION_ID))
 537     url="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
 538     #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
 539     event_name="bin"
 540     [ -n "$INSTALL_FROM_SOURCE" ] && event_name="src"
 541     [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name="lxd"
 542     event_name="${event_name}_$1"
 543     url="${url}&event=${event_name}&ce_duration=${duration}"
 544     wget -q -O /dev/null $url
 545 }
 546
 547 UNINSTALL=""
 548 DEVELOP=""
 549 NAT=""
 550 UPDATE=""
 551 RECONFIGURE=""
 552 TEST_INSTALLER=""
 553 INSTALL_LXD=""
 554 SHOWOPTS=""
 555 COMMIT_ID=""
 556 ASSUME_YES=""
 557 INSTALL_FROM_SOURCE=""
 558 RELEASE="-R ReleaseTHREE"
 559 INSTALL_VIMEMU=""
 560 INSTALL_FROM_LXDIMAGES=""
 561 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 562 LXD_REPOSITORY_PATH=""
 563 NOCONFIGURE=""
 564 RELEASE_DAILY=""
 565 SESSION_ID=`date +%s`
 566
 567 while getopts ":hy-:b:r:k:u:R:l:p:" o; do
 568     case "${o}" in
 569         h)
 570             usage && exit 0
 571             ;;
 572         b)
 573             COMMIT_ID=${OPTARG}
 574             ;;
 575         r)
 576             REPOSITORY="-r ${OPTARG}"
 577             ;;
 578         R)
 579             RELEASE="-R ${OPTARG}"
 580             ;;
 581         k)
 582             REPOSITORY_KEY="-k ${OPTARG}"
 583             ;;
 584         u)
 585             REPOSITORY_BASE="-u ${OPTARG}"
 586             ;;
 587         l)
 588             LXD_REPOSITORY_BASE="${OPTARG}"
 589             ;;
 590         p)
 591             LXD_REPOSITORY_PATH="${OPTARG}"
 592             ;;
 593         -)
 594             [ "${OPTARG}" == "help" ] && usage && exit 0
 595             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
 596             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 597             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 598             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 599             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 600             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 601             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 602             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 603             [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES="y" && continue
 604             [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
 605             [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE="y" && continue
 606             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 607             [ "${OPTARG}" == "daily" ] && RELEASE_DAILY="y" && continue
 608             echo -e "Invalid option: '--$OPTARG'\n" >&2
 609             usage && exit 1
 610             ;;
 611         \?)
 612             echo -e "Invalid option: '-$OPTARG'\n" >&2
 613             usage && exit 1
 614             ;;
 615         y)
 616             ASSUME_YES="y"
 617             ;;
 618         *)
 619             usage && exit 1
 620             ;;
 621     esac
 622 done
 623
 624 if [ -n "$SHOWOPTS" ]; then
 625     dump_vars
 626     exit 0
 627 fi
 628
 629 [ -n "$RELEASE_DAILY" ] && echo -e "\nInstalling from daily build repo" && RELEASE="-R ReleaseTHREE-daily" && REPOSITORY="-r testing" && COMMIT_ID="master"
 630
 631 # if develop, we force master
 632 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 633
 634 # forcing source from master removed. Now only install from source when explicit
 635 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
 636
 637 if [ -n "$TEST_INSTALLER" ]; then
 638     echo -e "\nUsing local devops repo for OSM installation"
 639     TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 640 else
 641     echo -e "\nCreating temporary dir for OSM installation"
 642     TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 643     trap 'rm -rf "$TEMPDIR"' EXIT
 644 fi
 645
 646 need_packages="git jq"
 647 for package in $need_packages; do
 648     echo -e "Checking required packages: $package"
 649     dpkg -l $package &>/dev/null \
 650         || ! echo -e "     $package not installed.\nInstalling $package requires root privileges" \
 651         || sudo apt-get install -y $package \
 652         || FATAL "failed to install $package"
 653 done
 654
 655 if [ -z "$TEST_INSTALLER" ]; then
 656     echo -e "\nCloning devops repo temporarily"
 657     git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
 658     RC_CLONE=$?
 659 fi
 660
 661 echo -e "\nGuessing the current stable release"
 662 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
 663 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
 664 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
 665 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
 666
 667 if [ -n "$RELEASE_DAILY" ]; then
 668     echo "Using master/HEAD devops"
 669     git -C $TEMPDIR checkout master
 670 elif [ -z "$TEST_INSTALLER" ]; then
 671     git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
 672 fi
 673
 674 OSM_DEVOPS=$TEMPDIR
 675 OSM_JENKINS="$TEMPDIR/jenkins"
 676 . $OSM_JENKINS/common/all_funcs
 677
 678 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
 679 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
 680 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
 681 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
 682
 683 #Installation starts here
 684 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
 685 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
 686     ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
 687 fi
 688
 689 echo -e "\nChecking required packages: wget, curl, tar"
 690 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt-get install -y wget curl tar
 691
 692 echo -e "Checking required packages: lxd"
 693 lxd --version &>/dev/null || FATAL "lxd not present, exiting."
 694 [ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd" && install_lxd
 695
 696 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README.txt &> /dev/null
 697 track start
 698
 699 # use local devops for containers
 700 export OSM_USE_LOCAL_DEVOPS=true
 701 if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
 702     echo -e "\nCreating the containers and building from source ..."
 703     $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
 704     ro_is_up && track RO
 705     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
 706     vca_is_up && track VCA
 707     $OSM_DEVOPS/jenkins/host/start_build MON || FATAL "MON install failed"
 708     mon_is_up && track MON
 709     $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
 710     $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
 711     #so_is_up && track SOUI
 712     track SOUI
 713 elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
 714     echo -e "\nInstalling from lxd images ..."
 715     install_from_lxdimages
 716 else #install from binaries
 717     echo -e "\nCreating the containers and installing from binaries ..."
 718     $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
 719     ro_is_up && track RO
 720     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
 721     vca_is_up && track VCA
 722     $OSM_DEVOPS/jenkins/host/install MON || FATAL "MON build failed"
 723     mon_is_up && track MON
 724     $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
 725     $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
 726     #so_is_up && track SOUI
 727     track SOUI
 728 fi
 729
 730 #Install iptables-persistent and configure NAT rules
 731 [ -z "$NOCONFIGURE" ] && nat
 732
 733 #Configure components
 734 [ -z "$NOCONFIGURE" ] && configure
 735
 736 #Install osmclient
 737 [ -z "$NOCONFIGURE" ] && install_osmclient
 738
 739 #Install vim-emu (optional)
 740 if [ -n "$INSTALL_VIMEMU" ]; then
 741     echo -e "\nInstalling vim-emu ..."
 742     install_vimemu
 743 fi
 744
 745 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README2.txt &> /dev/null
 746 track end
 747 echo -e "\nDONE"
 748