installers/install_osm.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from binaries or source code (by default, from binaries)"
  19     echo -e "  OPTIONS"
  20     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  21     echo -e "     --source:       install OSM from source code using the latest stable tag"
  22     echo -e "     -r <repo>:      use specified repository name for osm packages"
  23     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  24     echo -e "     -u <repo base>: use specified repository url for osm packages"
  25     echo -e "     -k <repo key>:  use specified repository public key url"
  26     echo -e "     -b <refspec>:   install OSM from source code using a specific branch (master, v2.0, ...) or tag"
  27     echo -e "                     -b master          (main dev branch)"
  28     echo -e "                     -b v2.0            (v2.0 branch)"
  29     echo -e "                     -b tags/v1.1.0     (a specific tag)"
  30     echo -e "                     ..."
  31     echo -e "     --lxdimages:    download lxd images from OSM repository instead of creating them from scratch"
  32     echo -e "     -l <lxd_repo>:  use specified repository url for lxd images"
  33     echo -e "     --vimemu:       additionally fetch, build, and deploy the VIM emulator as a docker container"
  34     echo -e "     --develop:      (deprecated, use '-b master') install OSM from source code using the master branch"
  35 #    echo -e "     --reconfigure:  reconfigure the modules (DO NOT change NAT rules)"
  36     echo -e "     --nat:          install only NAT rules"
  37     echo -e "     --noconfigure:  DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
  38 #    echo -e "     --update:       update to the latest stable release or to the latest commit if using a specific branch"
  39     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  40     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  41     echo -e "     -h / --help:    print this help"
  42 }
  43
  44 #Uninstall OSM: remove containers
  45 function uninstall(){
  46     echo -e "\nUninstalling OSM"
  47     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  48         $OSM_DEVOPS/jenkins/host/clean_container RO
  49         $OSM_DEVOPS/jenkins/host/clean_container VCA
  50         $OSM_DEVOPS/jenkins/host/clean_container SO
  51         #$OSM_DEVOPS/jenkins/host/clean_container UI
  52     else
  53         lxc stop RO && lxc delete RO
  54         lxc stop VCA && lxc delete VCA
  55         lxc stop SO-ub && lxc delete SO-ub
  56     fi
  57     echo -e "\nDeleting imported lxd images if they exist"
  58     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
  59     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
  60     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
  61 }
  62
  63 #Configure NAT rules, based on the current IP addresses of containers
  64 function nat(){
  65     echo -e "\nChecking required packages: iptables-persistent"
  66     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
  67     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
  68     echo -e "\nConfiguring NAT rules"
  69     echo -e "   Required root privileges"
  70     sudo $OSM_DEVOPS/installers/nat_osm
  71 }
  72
  73 function FATAL(){
  74     echo "FATAL error: Cannot install OSM due to \"$1\""
  75     exit 1
  76 }
  77
  78 #Update RO, SO and UI:
  79 function update(){
  80     echo -e "\nUpdating components"
  81
  82     echo -e "     Updating RO"
  83     CONTAINER="RO"
  84     MDG="RO"
  85     INSTALL_FOLDER="/opt/openmano"
  86     echo -e "     Fetching the repo"
  87     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
  88     BRANCH=""
  89     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
  90     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
  91     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
  92     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
  93     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
  94     # COMMIT_ID either was  previously set with -b option, or is an empty string
  95     CHECKOUT_ID=$COMMIT_ID
  96     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
  97     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
  98     if [[ $CHECKOUT_ID == "tags/"* ]]; then
  99         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 100     else
 101         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 102     fi
 103     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 104     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 105         echo "         Nothing to be done."
 106     else
 107         echo "         Update required."
 108         lxc exec $CONTAINER -- service osm-ro stop
 109         lxc exec $CONTAINER -- git -C /opt/openmano stash
 110         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
 111         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
 112         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
 113         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
 114         lxc exec $CONTAINER -- service osm-ro start
 115     fi
 116     echo
 117
 118     echo -e "     Updating SO and UI"
 119     CONTAINER="SO-ub"
 120     MDG="SO"
 121     INSTALL_FOLDER=""   # To be filled in
 122     echo -e "     Fetching the repo"
 123     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 124     BRANCH=""
 125     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 126     [ -z "$BRANCH" ] && FATAL "Could not find the current branch in use in the '$MDG'"
 127     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 128     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 129     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 130     # COMMIT_ID either was  previously set with -b option, or is an empty string
 131     CHECKOUT_ID=$COMMIT_ID
 132     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 133     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 134     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 135         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 136     else
 137         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 138     fi
 139     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 140     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 141         echo "         Nothing to be done."
 142     else
 143         echo "         Update required."
 144         # Instructions to be added
 145         # lxc exec SO-ub -- ...
 146     fi
 147     echo
 148 }
 149
 150 function so_is_up() {
 151     if [ -n "$1" ]; then
 152         SO_IP=$1
 153     else
 154         SO_IP=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
 155     fi
 156     time=0
 157     step=5
 158     timelength=300
 159     while [ $time -le $timelength ]
 160     do
 161         if [[ `curl -k -X GET   https://$SO_IP:8008/api/operational/vcs/info \
 162                 -H 'accept: application/vnd.yang.data+json' \
 163                 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
 164                 -H 'cache-control: no-cache' 2> /dev/null | jq  '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
 165         then
 166             echo "RW.Restconf running....SO is up"
 167             return 0
 168         fi
 169
 170         sleep $step
 171         echo -n "."
 172         time=$((time+step))
 173     done
 174
 175     FATAL "OSM Failed to startup. SO failed to startup"
 176 }
 177
 178 function vca_is_up() {
 179     if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
 180             echo "VCA is up and running"
 181             return 0
 182     fi
 183
 184     FATAL "OSM Failed to startup. VCA failed to startup"
 185 }
 186
 187 function ro_is_up() {
 188     if [ -n "$1" ]; then
 189         RO_IP=$1
 190     else
 191         RO_IP=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
 192     fi
 193     time=0
 194     step=2
 195     timelength=20
 196     while [ $time -le $timelength ]; do
 197         if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
 198             echo "RO is up and running"
 199             return 0
 200         fi
 201         sleep $step
 202         echo -n "."
 203         time=$((time+step))
 204     done
 205
 206     FATAL "OSM Failed to startup. RO failed to startup"
 207 }
 208
 209
 210 function configure_RO(){
 211     . $OSM_DEVOPS/installers/export_ips
 212     echo -e "       Configuring RO"
 213     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc/osm/openmanod.cfg
 214     lxc exec RO -- service osm-ro restart
 215
 216     ro_is_up
 217
 218     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 219     lxc exec RO -- openmano tenant-create osm > /dev/null
 220     lxc exec RO -- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
 221     lxc exec RO -- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
 222     lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
 223 }
 224
 225 function configure_VCA(){
 226     echo -e "       Configuring VCA"
 227     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 228     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 229 }
 230
 231 function configure_SOUI(){
 232     . $OSM_DEVOPS/installers/export_ips
 233     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 234     RO_TENANT_ID=`lxc exec RO -- openmano tenant-list osm |awk '{print $1}'`
 235
 236     echo -e "       Configuring SO"
 237     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 238     sudo sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc/rc.local
 239     # make journaling persistent
 240     lxc exec SO-ub -- mkdir -p /var/log/journal
 241     lxc exec SO-ub -- systemd-tmpfiles --create --prefix /var/log/journal
 242     lxc exec SO-ub -- systemctl restart systemd-journald
 243
 244     echo RIFT_EXTERNAL_ADDRESS=$DEFAULT_IP | lxc exec SO-ub -- tee -a /usr/rift/etc/default/launchpad
 245
 246     lxc exec SO-ub -- systemctl restart launchpad
 247
 248     so_is_up $SO_CONTAINER_IP
 249
 250     #delete existing config agent (could be there on reconfigure)
 251     curl -k --request DELETE \
 252       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent/account/osmjuju \
 253       --header 'accept: application/vnd.yang.data+json' \
 254       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 255       --header 'cache-control: no-cache' \
 256       --header 'content-type: application/vnd.yang.data+json' &> /dev/null
 257
 258     result=$(curl -k --request POST \
 259       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 260       --header 'accept: application/vnd.yang.data+json' \
 261       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 262       --header 'cache-control: no-cache' \
 263       --header 'content-type: application/vnd.yang.data+json' \
 264       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}')
 265     [[ $result =~ .*success.* ]] || FATAL "Failed config-agent configuration: $result"
 266
 267     #R1/R2 config line
 268     #result=$(curl -k --request PUT \
 269     #  --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 270     #  --header 'accept: application/vnd.yang.data+json' \
 271     #  --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 272     #  --header 'cache-control: no-cache' \
 273     #  --header 'content-type: application/vnd.yang.data+json' \
 274     #  --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
 275
 276     result=$(curl -k --request PUT \
 277       --url https://$SO_CONTAINER_IP:8008/api/config/project/default/ro-account/account \
 278       --header 'accept: application/vnd.yang.data+json' \
 279       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 280       --header 'cache-control: no-cache'   \
 281       --header 'content-type: application/vnd.yang.data+json' \
 282       --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
 283     [[ $result =~ .*success.* ]] || FATAL "Failed resource-orchestrator configuration: $result"
 284
 285     result=$(curl -k --request PATCH \
 286       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/redirect-uri \
 287       --header 'accept: application/vnd.yang.data+json' \
 288       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 289       --header 'cache-control: no-cache'   \
 290       --header 'content-type: application/vnd.yang.data+json' \
 291       --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
 292     [[ $result =~ .*success.* ]] || FATAL "Failed redirect-uri configuration: $result"
 293
 294     result=$(curl -k --request PATCH \
 295       --url https://$SO_CONTAINER_IP:8008/v2/api/config/openidc-provider-config/rw-ui-client/post-logout-redirect-uri \
 296       --header 'accept: application/vnd.yang.data+json' \
 297       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 298       --header 'cache-control: no-cache'   \
 299       --header 'content-type: application/vnd.yang.data+json' \
 300       --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
 301     [[ $result =~ .*success.* ]] || FATAL "Failed post-logout-redirect-uri configuration: $result"
 302
 303     lxc exec SO-ub -- tee /etc/network/interfaces.d/60-rift.cfg <<EOF
 304 auto lo:1
 305 iface lo:1 inet static
 306         address  $DEFAULT_IP
 307         netmask 255.255.255.255
 308 EOF
 309     lxc exec SO-ub ifup lo:1
 310 }
 311
 312 #Configure RO, VCA, and SO with the initial configuration:
 313 #  RO -> tenant:osm, logs to be sent to SO
 314 #  VCA -> juju-password
 315 #  SO -> route to Juju Controller, add RO account, add VCA account
 316 function configure(){
 317     #Configure components
 318     echo -e "\nConfiguring components"
 319     configure_RO
 320     configure_VCA
 321     configure_SOUI
 322 }
 323
 324 function install_lxd() {
 325     sudo apt-get update
 326     sudo apt-get install -y lxd
 327     newgrp lxd
 328     lxd init --auto
 329     lxd waitready
 330     lxc network create lxdbr0 ipv4.address=auto ipv4.nat=true ipv6.address=none ipv6.nat=false
 331     DEFAULT_INTERFACE=$(route -n | awk '$1~/^0.0.0.0/ {print $8}')
 332     DEFAULT_MTU=$( ip addr show $DEFAULT_INTERFACE | perl -ne 'if (/mtu\s(\d+)/) {print $1;}')
 333     lxc profile device set default eth0 mtu $DEFAULT_MTU
 334     #sudo systemctl stop lxd-bridge
 335     #sudo systemctl --system daemon-reload
 336     #sudo systemctl enable lxd-bridge
 337     #sudo systemctl start lxd-bridge
 338 }
 339
 340 function ask_user(){
 341     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 342     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 343     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 344     read -e -p "$1" USER_CONFIRMATION
 345     while true ; do
 346         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 347         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 348         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 349         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 350         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 351     done
 352 }
 353
 354 function launch_container_from_lxd(){
 355     export OSM_MDG=$1
 356     OSM_load_config
 357     export OSM_BASE_IMAGE=$2
 358     if ! container_exists $OSM_BUILD_CONTAINER; then
 359         CONTAINER_OPTS=""
 360         [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.privileged=true"
 361         [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS="$CONTAINER_OPTS -c security.nesting=true"
 362         create_container $OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
 363         wait_container_up $OSM_BUILD_CONTAINER
 364     fi
 365 }
 366
 367 function install_osmclient(){
 368     CLIENT_RELEASE=${RELEASE#"-R "}
 369     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 370     CLIENT_REPOSITORY="stable"
 371     [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE="-u https://osm-download.etsi.org/repository/osm/debian"
 372     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 373     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 374     curl $key_location | sudo apt-key add -
 375     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
 376     sudo apt-get update
 377     sudo apt-get install -y python-osmclient
 378     export OSM_HOSTNAME=`lxc list | awk '($2=="SO-ub"){print $6}'`
 379     export OSM_RO_HOSTNAME=`lxc list | awk '($2=="RO"){print $6}'`
 380     echo -e "\nOSM client installed"
 381     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 382     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 383     echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 384 }
 385
 386 function install_from_lxdimages(){
 387     LXD_RELEASE=${RELEASE#"-R "}
 388     LXD_IMAGE_DIR="$(mktemp -d -q --tmpdir "osmimages.XXXXXX")"
 389     trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
 390     wget -O $LXD_IMAGE_DIR/osm-ro.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.tar.gz
 391     echo -e "\nDeleting previous lxd images if they exist"
 392     lxc image show osm-ro &>/dev/null && lxc image delete osm-ro
 393     lxc image show osm-vca &>/dev/null && lxc image delete osm-vca
 394     lxc image show osm-soui &>/dev/null && lxc image delete osm-soui
 395     echo -e "\nImporting osm-ro"
 396     lxc image import $LXD_IMAGE_DIR/osm-ro.tar.gz --alias osm-ro
 397     rm -f $LXD_IMAGE_DIR/osm-ro.tar.gz
 398     wget -O $LXD_IMAGE_DIR/osm-vca.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.tar.gz
 399     echo -e "\nImporting osm-vca"
 400     lxc image import $LXD_IMAGE_DIR/osm-vca.tar.gz --alias osm-vca
 401     rm -f $LXD_IMAGE_DIR/osm-vca.tar.gz
 402     echo -e "\nImporting osm-soui"
 403     wget -O $LXD_IMAGE_DIR/osm-soui.tar.gz $LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.tar.gz
 404     lxc image import $LXD_IMAGE_DIR/osm-soui.tar.gz --alias osm-soui
 405     rm -f $LXD_IMAGE_DIR/osm-soui.tar.gz
 406     launch_container_from_lxd RO osm-ro
 407     ro_is_up && track RO
 408     launch_container_from_lxd VCA osm-vca
 409     vca_is_up && track VCA
 410     launch_container_from_lxd SO osm-soui
 411     #so_is_up && track SOUI
 412     track SOUI
 413 }
 414
 415 function install_docker_ce() {
 416     # installs and configures Docker CE
 417     echo "Installing Docker CE ..."
 418     sudo apt-get -qq update
 419     sudo apt-get install -y apt-transport-https ca-certificates software-properties-common
 420     curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
 421     sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
 422     sudo apt-get -qq update
 423     sudo apt-get install -y docker-ce
 424     echo "Adding user to group 'docker'"
 425     sudo groupadd -f docker
 426     sudo usermod -aG docker $USER
 427     echo "... Docker CE installation done"
 428     sleep 2
 429     sudo service docker restart
 430     echo "... restarted Docker service"
 431 }
 432
 433 function install_vimemu() {
 434     # install Docker
 435     install_docker_ce
 436     # clone vim-emu repository (attention: branch is currently master only)
 437     echo "Cloning vim-emu repository ..."
 438     git clone https://osm.etsi.org/gerrit/osm/vim-emu.git
 439     # build vim-emu docker
 440     echo "Building vim-emu Docker container..."
 441     sudo docker build -t vim-emu-img -f vim-emu/Dockerfile vim-emu/
 442     # start vim-emu container as daemon
 443     echo "Starting vim-emu Docker container 'vim-emu' ..."
 444     sudo docker run --name vim-emu -t -d --rm --privileged --pid='host' -v /var/run/docker.sock:/var/run/docker.sock vim-emu-img python examples/osm_default_daemon_topology_2_pop.py
 445     echo "Waiting for 'vim-emu' container to start ..."
 446     sleep 5
 447     export VIMEMU_HOSTNAME=$(sudo docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vim-emu)
 448     echo "vim-emu running at $VIMEMU_HOSTNAME ..."
 449     echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
 450     echo "     export OSM_HOSTNAME=${OSM_HOSTNAME}"
 451     echo "     export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
 452     echo -e "You might be interested in adding the following vim-emu env variables to your .bashrc file:"
 453     echo "     export VIMEMU_HOSTNAME=${VIMEMU_HOSTNAME}"
 454     echo -e "\nTo add the emulated VIM to OSM you should do:"
 455     echo "     osm vim-create --name emu-vim1 --user username --password password --auth_url http://$VIMEMU_HOSTNAME:6001/v2.0 --tenant tenantName --account_type openstack"
 456 }
 457
 458 function dump_vars(){
 459     echo "DEVELOP=$DEVELOP"
 460     echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
 461     echo "UNINSTALL=$UNINSTALL"
 462     echo "NAT=$NAT"
 463     echo "UPDATE=$UPDATE"
 464     echo "RECONFIGURE=$RECONFIGURE"
 465     echo "TEST_INSTALLER=$TEST_INSTALLER"
 466     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 467     echo "INSTALL_LXD=$INSTALL_LXD"
 468     echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
 469     echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
 470     echo "RELEASE=$RELEASE"
 471     echo "REPOSITORY=$REPOSITORY"
 472     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 473     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 474     echo "NOCONFIGURE=$NOCONFIGURE"
 475     echo "SHOWOPTS=$SHOWOPTS"
 476     echo "Install from specific refspec (-b): $COMMIT_ID"
 477 }
 478
 479 function track(){
 480     ctime=`date +%s`
 481     duration=$((ctime - SESSION_ID))
 482     url="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
 483     #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
 484     event_name="bin"
 485     [ -n "$INSTALL_FROM_SOURCE" ] && event_name="src"
 486     [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name="lxd"
 487     event_name="${event_name}_$1"
 488     url="${url}&event=${event_name}&ce_duration=${duration}"
 489     wget -q -O /dev/null $url
 490 }
 491
 492 UNINSTALL=""
 493 DEVELOP=""
 494 NAT=""
 495 UPDATE=""
 496 RECONFIGURE=""
 497 TEST_INSTALLER=""
 498 INSTALL_LXD=""
 499 SHOWOPTS=""
 500 COMMIT_ID=""
 501 ASSUME_YES=""
 502 INSTALL_FROM_SOURCE=""
 503 RELEASE="-R ReleaseTHREE"
 504 INSTALL_VIMEMU=""
 505 INSTALL_FROM_LXDIMAGES=""
 506 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 507 NOCONFIGURE=""
 508 RELEASE_DAILY=""
 509 SESSION_ID=`date +%s`
 510
 511 while getopts ":hy-:b:r:k:u:R:l:" o; do
 512     case "${o}" in
 513         h)
 514             usage && exit 0
 515             ;;
 516         b)
 517             COMMIT_ID=${OPTARG}
 518             ;;
 519         r)
 520             REPOSITORY="-r ${OPTARG}"
 521             ;;
 522         R)
 523             RELEASE="-R ${OPTARG}"
 524             ;;
 525         k)
 526             REPOSITORY_KEY="-k ${OPTARG}"
 527             ;;
 528         u)
 529             REPOSITORY_BASE="-u ${OPTARG}"
 530             ;;
 531         l)
 532             LXD_REPOSITORY_BASE="${OPTARG}"
 533             ;;
 534         -)
 535             [ "${OPTARG}" == "help" ] && usage && exit 0
 536             [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && continue
 537             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 538             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 539             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 540             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 541             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 542             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 543             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 544             [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES="y" && continue
 545             [ "${OPTARG}" == "vimemu" ] && INSTALL_VIMEMU="y" && continue
 546             [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE="y" && continue
 547             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 548             [ "${OPTARG}" == "daily" ] && RELEASE_DAILY="y" && continue
 549             echo -e "Invalid option: '--$OPTARG'\n" >&2
 550             usage && exit 1
 551             ;;
 552         \?)
 553             echo -e "Invalid option: '-$OPTARG'\n" >&2
 554             usage && exit 1
 555             ;;
 556         y)
 557             ASSUME_YES="y"
 558             ;;
 559         *)
 560             usage && exit 1
 561             ;;
 562     esac
 563 done
 564
 565 if [ -n "$SHOWOPTS" ]; then
 566     dump_vars
 567     exit 0
 568 fi
 569
 570 [ -n "$RELEASE_DAILY" ] && echo -e "\nInstalling from daily build repo" && RELEASE="-R ReleaseTHREE-daily" && REPOSITORY="-r testing" && COMMIT_ID="master"
 571
 572 # if develop, we force master
 573 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 574
 575 # forcing source from master removed. Now only install from source when explicit
 576 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
 577
 578 if [ -n "$TEST_INSTALLER" ]; then
 579     echo -e "\nUsing local devops repo for OSM installation"
 580     TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 581 else
 582     echo -e "\nCreating temporary dir for OSM installation"
 583     TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 584     trap 'rm -rf "$TEMPDIR"' EXIT
 585 fi
 586
 587 need_packages="git jq"
 588 for package in $need_packages; do
 589     echo -e "Checking required packages: $package"
 590     dpkg -l $package &>/dev/null \
 591         || ! echo -e "     $package not installed.\nInstalling $package requires root privileges" \
 592         || sudo apt-get install -y $package \
 593         || FATAL "failed to install $package"
 594 done
 595
 596 if [ -z "$TEST_INSTALLER" ]; then
 597     echo -e "\nCloning devops repo temporarily"
 598     git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
 599     RC_CLONE=$?
 600 fi
 601
 602 echo -e "\nGuessing the current stable release"
 603 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
 604 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
 605 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
 606 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
 607
 608 if [ -n "$RELEASE_DAILY" ]; then
 609     echo "Using master/HEAD devops"
 610     git -C $TEMPDIR checkout master
 611 elif [ -z "$TEST_INSTALLER" ]; then
 612     git -C $TEMPDIR checkout tags/$LATEST_STABLE_DEVOPS
 613 fi
 614
 615 OSM_DEVOPS=$TEMPDIR
 616 OSM_JENKINS="$TEMPDIR/jenkins"
 617 . $OSM_JENKINS/common/all_funcs
 618
 619 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
 620 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
 621 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
 622 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
 623
 624 #Installation starts here
 625 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
 626 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
 627     ! ask_user "The installation will take about 75-90 minutes. Continue (Y/n)? " y && echo "Cancelled!" && exit 1
 628 fi
 629
 630 echo -e "\nChecking required packages: wget, curl, tar"
 631 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt-get install -y wget curl tar
 632
 633 echo -e "Checking required packages: lxd"
 634 lxd --version &>/dev/null || FATAL "lxd not present, exiting."
 635 [ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd" && install_lxd
 636
 637 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README.txt &> /dev/null
 638 track start
 639
 640 # use local devops for containers
 641 export OSM_USE_LOCAL_DEVOPS=true
 642 if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
 643     echo -e "\nCreating the containers and building from source ..."
 644     $OSM_DEVOPS/jenkins/host/start_build RO --notest checkout $COMMIT_ID || FATAL "RO container build failed (refspec: '$COMMIT_ID')"
 645     ro_is_up && track RO
 646     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA container build failed"
 647     vca_is_up && track VCA
 648     $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID || FATAL "SO container build failed (refspec: '$COMMIT_ID')"
 649     $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID || FATAL "UI container build failed (refspec: '$COMMIT_ID')"
 650     #so_is_up && track SOUI
 651     track SOUI
 652 elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
 653     echo -e "\nInstalling from lxd images ..."
 654     install_from_lxdimages
 655 else #install from binaries
 656     echo -e "\nCreating the containers and installing from binaries ..."
 657     $OSM_DEVOPS/jenkins/host/install RO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "RO install failed"
 658     ro_is_up && track RO
 659     $OSM_DEVOPS/jenkins/host/start_build VCA || FATAL "VCA install failed"
 660     vca_is_up && track VCA
 661     $OSM_DEVOPS/jenkins/host/install SO $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "SO install failed"
 662     $OSM_DEVOPS/jenkins/host/install UI $REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL "UI install failed"
 663     #so_is_up && track SOUI
 664     track SOUI
 665 fi
 666
 667 #Install iptables-persistent and configure NAT rules
 668 [ -z "$NOCONFIGURE" ] && nat
 669
 670 #Configure components
 671 [ -z "$NOCONFIGURE" ] && configure
 672
 673 #Install osmclient
 674 [ -z "$NOCONFIGURE" ] && install_osmclient
 675
 676 #Install vim-emu (optional)
 677 if [ -n "$INSTALL_VIMEMU" ]; then
 678     echo -e "\nInstalling vim-emu ..."
 679     install_vimemu
 680 fi
 681
 682 wget -q -O- https://osm-download.etsi.org/ftp/osm-3.0-three/README2.txt &> /dev/null
 683 track end
 684 echo -e "\nDONE"
 685