2 # Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
17 echo -e "usage: $0 [OPTIONS]"
18 echo -e "Install OSM from binaries or source code (by default, from binaries)"
20 echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
21 echo -e " --source: install OSM from source code using the latest stable tag"
22 echo -e " -r <repo>: use specified repository name for osm packages"
23 echo -e " -R <release>: use specified release for osm binaries (deb packages, lxd images, ...)"
24 echo -e " -u <repo base>: use specified repository url for osm packages"
25 echo -e " -k <repo key>: use specified repository public key url"
26 echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag"
27 echo -e " -b master (main dev branch)"
28 echo -e " -b v2.0 (v2.0 branch)"
29 echo -e " -b tags/v1.1.0 (a specific tag)"
31 echo -e " --lxdimages: download lxd images from OSM repository instead of creating them from scratch"
32 echo -e " -l <lxd_repo>: use specified repository url for lxd images"
33 echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
34 # echo -e " --reconfigure: reconfigure the modules (DO NOT change NAT rules)"
35 echo -e " --nat: install only NAT rules"
36 echo -e " --noconfigure: DO NOT install osmclient, DO NOT install NAT rules, DO NOT configure modules"
37 # echo -e " --update: update to the latest stable release or to the latest commit if using a specific branch"
38 echo -e " --showopts: print chosen options and exit (only for debugging)"
39 echo -e " -y: do not prompt for confirmation, assumes yes"
40 echo -e " -h / --help: print this help"
43 #Uninstall OSM: remove containers
45 echo -e "\nUninstalling OSM"
46 if [ $RC_CLONE ] ||
[ -n "$TEST_INSTALLER" ]; then
47 $OSM_DEVOPS/jenkins
/host
/clean_container RO
48 $OSM_DEVOPS/jenkins
/host
/clean_container VCA
49 $OSM_DEVOPS/jenkins
/host
/clean_container SO
50 #$OSM_DEVOPS/jenkins/host/clean_container UI
52 lxc stop RO
&& lxc delete RO
53 lxc stop VCA
&& lxc delete VCA
54 lxc stop SO-ub
&& lxc delete SO-ub
58 #Configure NAT rules, based on the current IP addresses of containers
60 echo -e "\nChecking required packages: iptables-persistent"
61 dpkg
-l iptables-persistent
&>/dev
/null ||
! echo -e " Not installed.\nInstalling iptables-persistent requires root privileges" || \
62 sudo DEBIAN_FRONTEND
=noninteractive apt-get
-yq install iptables-persistent
63 echo -e "\nConfiguring NAT rules"
64 echo -e " Required root privileges"
65 sudo
$OSM_DEVOPS/installers
/nat_osm
69 echo "FATAL error: Cannot install OSM due to \"$1\""
73 #Update RO, SO and UI:
75 echo -e "\nUpdating components"
77 echo -e " Updating RO"
80 INSTALL_FOLDER
="/opt/openmano"
81 echo -e " Fetching the repo"
82 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
84 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
85 [ -z "$BRANCH" ] && FATAL
"Could not find the current branch in use in the '$MDG'"
86 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
87 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
88 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
89 # COMMIT_ID either was previously set with -b option, or is an empty string
90 CHECKOUT_ID
=$COMMIT_ID
91 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
92 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
93 if [[ $CHECKOUT_ID == "tags/"* ]]; then
94 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
96 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
98 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
99 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
100 echo " Nothing to be done."
102 echo " Update required."
103 lxc
exec $CONTAINER -- service osm-ro stop
104 lxc
exec $CONTAINER -- git
-C /opt
/openmano stash
105 lxc
exec $CONTAINER -- git
-C /opt
/openmano pull
--rebase
106 lxc
exec $CONTAINER -- git
-C /opt
/openmano checkout
$CHECKOUT_ID
107 lxc
exec $CONTAINER -- git
-C /opt
/openmano stash pop
108 lxc
exec $CONTAINER -- /opt
/openmano
/database_utils
/migrate_mano_db.sh
109 lxc
exec $CONTAINER -- service osm-ro start
113 echo -e " Updating SO and UI"
116 INSTALL_FOLDER
="" # To be filled in
117 echo -e " Fetching the repo"
118 lxc
exec $CONTAINER -- git
-C $INSTALL_FOLDER fetch
--all
120 BRANCH
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
121 [ -z "$BRANCH" ] && FATAL
"Could not find the current branch in use in the '$MDG'"
122 CURRENT
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
123 CURRENT_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
124 echo " FROM: $CURRENT ($CURRENT_COMMIT_ID)"
125 # COMMIT_ID either was previously set with -b option, or is an empty string
126 CHECKOUT_ID
=$COMMIT_ID
127 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID
="tags/$LATEST_STABLE_DEVOPS"
128 [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID
="$BRANCH"
129 if [[ $CHECKOUT_ID == "tags/"* ]]; then
130 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
132 REMOTE_COMMIT_ID
=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
134 echo " TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
135 if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
136 echo " Nothing to be done."
138 echo " Update required."
139 # Instructions to be added
140 # lxc exec SO-ub -- ...
145 function so_is_up
() {
149 SO_IP
=`lxc list SO-ub -c 4|grep eth0 |awk '{print $2}'`
154 while [ $time -le $timelength ]
156 if [[ `curl -k -X GET https://$SO_IP:8008/api/operational/vcs/info \
157 -H 'accept: application/vnd.yang.data+json' \
158 -H 'authorization: Basic YWRtaW46YWRtaW4=' \
159 -H 'cache-control: no-cache' 2> /dev/null | jq '.[].components.component_info[] | select(.component_name=="RW.Restconf")' 2>/dev/null | grep "RUNNING" | wc -l` -eq 1 ]]
161 echo "RW.Restconf running....SO is up"
170 FATAL
"OSM Failed to startup. SO failed to startup"
173 function vca_is_up
() {
174 if [[ `lxc exec VCA -- juju status | grep "osm" | wc -l` -eq 1 ]]; then
175 echo "VCA is up and running"
179 FATAL
"OSM Failed to startup. VCA failed to startup"
182 function ro_is_up
() {
186 RO_IP
=`lxc list RO -c 4|grep eth0 |awk '{print $2}'`
191 while [ $time -le $timelength ]; do
192 if [[ `curl http://$RO_IP:9090/openmano/ | grep "works" | wc -l` -eq 1 ]]; then
193 echo "RO is up and running"
201 FATAL
"OSM Failed to startup. RO failed to startup"
205 function configure_RO
(){
206 .
$OSM_DEVOPS/installers
/export_ips
207 echo -e " Configuring RO"
208 lxc
exec RO
-- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /etc
/osm
/openmanod.cfg
209 lxc
exec RO
-- service osm-ro restart
213 lxc
exec RO
-- openmano tenant-delete
-f osm
>/dev
/null
214 lxc
exec RO
-- sed -i '/export OPENMANO_TENANT=osm/d' .bashrc
215 lxc
exec RO
-- sed -i '$ i export OPENMANO_TENANT=osm' .bashrc
216 #lxc exec RO -- sh -c 'echo "export OPENMANO_TENANT=osm" >> .bashrc'
219 function configure_VCA
(){
220 echo -e " Configuring VCA"
221 JUJU_PASSWD
=`date +%s | sha256sum | base64 | head -c 32`
222 echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc
exec VCA
-- juju change-user-password
225 function configure_SOUI
(){
226 .
$OSM_DEVOPS/installers
/export_ips
227 JUJU_CONTROLLER_IP
=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
228 RO_TENANT_ID
=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
230 echo -e " Configuring SO"
231 sudo route add
-host $JUJU_CONTROLLER_IP gw
$VCA_CONTAINER_IP
232 sudo
sed -i "$ i route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP" /etc
/rc.
local
233 # make journaling persistent
234 lxc
exec SO-ub
-- mkdir
-p /var
/log
/journal
235 lxc
exec SO-ub
-- systemd-tmpfiles
--create --prefix /var
/log
/journal
236 lxc
exec SO-ub
-- systemctl restart systemd-journald
238 echo RIFT_EXTERNAL_ADDRESS
=$DEFAULT_IP | lxc
exec SO-ub
-- tee -a /usr
/rift
/etc
/default
/launchpad
240 lxc
exec SO-ub
-- systemctl restart launchpad
242 so_is_up
$SO_CONTAINER_IP
244 #delete existing config agent (could be there on reconfigure)
245 curl
-k --request DELETE \
246 --url https
://$SO_CONTAINER_IP:8008/api
/config
/config-agent
/account
/osmjuju \
247 --header 'accept: application/vnd.yang.data+json' \
248 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
249 --header 'cache-control: no-cache' \
250 --header 'content-type: application/vnd.yang.data+json' &> /dev
/null
252 result
=$
(curl
-k --request POST \
253 --url https
://$SO_CONTAINER_IP:8008/api
/config
/config-agent \
254 --header 'accept: application/vnd.yang.data+json' \
255 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
256 --header 'cache-control: no-cache' \
257 --header 'content-type: application/vnd.yang.data+json' \
258 --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" } } ]}')
259 [[ $result =~ .
*success.
* ]] || FATAL
"Failed config-agent configuration: $result"
262 #result=$(curl -k --request PUT \
263 # --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
264 # --header 'accept: application/vnd.yang.data+json' \
265 # --header 'authorization: Basic YWRtaW46YWRtaW4=' \
266 # --header 'cache-control: no-cache' \
267 # --header 'content-type: application/vnd.yang.data+json' \
268 # --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }')
270 result
=$
(curl
-k --request PUT \
271 --url https
://$SO_CONTAINER_IP:8008/api
/config
/project
/default
/ro-account
/account \
272 --header 'accept: application/vnd.yang.data+json' \
273 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
274 --header 'cache-control: no-cache' \
275 --header 'content-type: application/vnd.yang.data+json' \
276 --data '{"rw-ro-account:account": [ { "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'"}, "name": "osmopenmano", "ro-account-type": "openmano" }]}')
277 [[ $result =~ .
*success.
* ]] || FATAL
"Failed resource-orchestrator configuration: $result"
279 result
=$
(curl
-k --request PATCH \
280 --url https
://$SO_CONTAINER_IP:8008/v
2/api
/config
/openidc-provider-config
/rw-ui-client
/redirect-uri \
281 --header 'accept: application/vnd.yang.data+json' \
282 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
283 --header 'cache-control: no-cache' \
284 --header 'content-type: application/vnd.yang.data+json' \
285 --data '{"redirect-uri": "https://'$DEFAULT_IP':8443/callback" }')
286 [[ $result =~ .
*success.
* ]] || FATAL
"Failed redirect-uri configuration: $result"
288 result
=$
(curl
-k --request PATCH \
289 --url https
://$SO_CONTAINER_IP:8008/v
2/api
/config
/openidc-provider-config
/rw-ui-client
/post-logout-redirect-uri \
290 --header 'accept: application/vnd.yang.data+json' \
291 --header 'authorization: Basic YWRtaW46YWRtaW4=' \
292 --header 'cache-control: no-cache' \
293 --header 'content-type: application/vnd.yang.data+json' \
294 --data '{"post-logout-redirect-uri": "https://'$DEFAULT_IP':8443/?api_server=https://'$DEFAULT_IP'" }')
295 [[ $result =~ .
*success.
* ]] || FATAL
"Failed post-logout-redirect-uri configuration: $result"
297 lxc
exec SO-ub
-- tee /etc
/network
/interfaces.d
/60-rift.cfg
<<EOF
299 iface lo:1 inet static
301 netmask 255.255.255.255
303 lxc
exec SO-ub ifup lo
:1
306 #Configure RO, VCA, and SO with the initial configuration:
307 # RO -> tenant:osm, logs to be sent to SO
308 # VCA -> juju-password
309 # SO -> route to Juju Controller, add RO account, add VCA account
310 function configure
(){
311 #Configure components
312 echo -e "\nConfiguring components"
318 function install_lxd
() {
320 sudo apt-get
install -y lxd
324 lxc network create lxdbr0 ipv4.address
=auto ipv4.nat
=true ipv6.address
=none ipv6.nat
=false
325 DEFAULT_INTERFACE
=$
(route
-n |
awk '$1~/^0.0.0.0/ {print $8}')
326 DEFAULT_MTU
=$
( ip addr show
$DEFAULT_INTERFACE | perl
-ne 'if (/mtu\s(\d+)/) {print $1;}')
327 lxc profile device
set default eth0 mtu
$DEFAULT_MTU
328 #sudo systemctl stop lxd-bridge
329 #sudo systemctl --system daemon-reload
330 #sudo systemctl enable lxd-bridge
331 #sudo systemctl start lxd-bridge
335 # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
336 # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
337 # Return: true(0) if user type 'yes'; false (1) if user type 'no'
338 read -e -p "$1" USER_CONFIRMATION
340 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
341 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
342 [ "${USER_CONFIRMATION,,}" == "yes" ] ||
[ "${USER_CONFIRMATION,,}" == "y" ] && return 0
343 [ "${USER_CONFIRMATION,,}" == "no" ] ||
[ "${USER_CONFIRMATION,,}" == "n" ] && return 1
344 read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
348 function launch_container_from_lxd
(){
351 export OSM_BASE_IMAGE
=$2
352 if ! container_exists
$OSM_BUILD_CONTAINER; then
354 [[ "$OSM_BUILD_CONTAINER_PRIVILEGED" == yes ]] && CONTAINER_OPTS
="$CONTAINER_OPTS -c security.privileged=true"
355 [[ "$OSM_BUILD_CONTAINER_ALLOW_NESTED" == yes ]] && CONTAINER_OPTS
="$CONTAINER_OPTS -c security.nesting=true"
356 create_container
$OSM_BASE_IMAGE $OSM_BUILD_CONTAINER $CONTAINER_OPTS
357 wait_container_up
$OSM_BUILD_CONTAINER
361 function install_osmclient
(){
362 CLIENT_RELEASE
=${RELEASE#"-R "}
363 CLIENT_REPOSITORY_KEY
="OSM%20ETSI%20Release%20Key.gpg"
364 CLIENT_REPOSITORY
="stable"
365 [ -z "$REPOSITORY_BASE" ] && REPOSITORY_BASE
="-u https://osm-download.etsi.org/repository/osm/debian"
366 CLIENT_REPOSITORY_BASE
=${REPOSITORY_BASE#"-u "}
367 key_location
=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
368 curl
$key_location | sudo apt-key add
-
369 sudo add-apt-repository
-y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient"
371 sudo apt-get
install -y python-osmclient
372 export OSM_HOSTNAME
=`lxc list | awk '($2=="SO-ub"){print $6}'`
373 export OSM_RO_HOSTNAME
=`lxc list | awk '($2=="RO"){print $6}'`
374 echo -e "\nOSM client installed"
375 echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
376 echo " export OSM_HOSTNAME=${OSM_HOSTNAME}"
377 echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
380 function install_from_lxdimages
(){
381 LXD_RELEASE
=${RELEASE#"-R "}
382 LXD_IMAGE_DIR
="$(mktemp -d -q --tmpdir "osmimages.XXXXXX
")"
383 trap 'rm -rf "$LXD_IMAGE_DIR"' EXIT
384 wget
-O $LXD_IMAGE_DIR/osm-ro.
tar.gz
$LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-ro.
tar.gz
385 lxc image import
$LXD_IMAGE_DIR/osm-ro.
tar.gz
--alias osm-ro
386 rm -f $LXD_IMAGE_DIR/osm-ro.
tar.gz
387 wget
-O $LXD_IMAGE_DIR/osm-vca.
tar.gz
$LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-vca.
tar.gz
388 lxc image import
$LXD_IMAGE_DIR/osm-vca.
tar.gz
--alias osm-vca
389 rm -f $LXD_IMAGE_DIR/osm-vca.
tar.gz
390 wget
-O $LXD_IMAGE_DIR/osm-soui.
tar.gz
$LXD_REPOSITORY_BASE/$LXD_RELEASE/osm-soui.
tar.gz
391 lxc image import
$LXD_IMAGE_DIR/osm-soui.
tar.gz
--alias osm-soui
392 rm -f $LXD_IMAGE_DIR/osm-soui.
tar.gz
393 launch_container_from_lxd RO osm-ro
395 launch_container_from_lxd VCA osm-vca
396 vca_is_up
&& track VCA
397 launch_container_from_lxd SO osm-soui
398 #so_is_up && track SOUI
402 function dump_vars
(){
403 echo "DEVELOP=$DEVELOP"
404 echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
405 echo "UNINSTALL=$UNINSTALL"
407 echo "UPDATE=$UPDATE"
408 echo "RECONFIGURE=$RECONFIGURE"
409 echo "TEST_INSTALLER=$TEST_INSTALLER"
410 echo "INSTALL_LXD=$INSTALL_LXD"
411 echo "INSTALL_FROM_LXDIMAGES=$INSTALL_FROM_LXDIMAGES"
412 echo "LXD_REPOSITORY_BASE=$LXD_REPOSITORY_BASE"
413 echo "RELEASE=$RELEASE"
414 echo "REPOSITORY=$REPOSITORY"
415 echo "REPOSITORY_BASE=$REPOSITORY_BASE"
416 echo "REPOSITORY_KEY=$REPOSITORY_KEY"
417 echo "NOCONFIGURE=$NOCONFIGURE"
418 echo "SHOWOPTS=$SHOWOPTS"
419 echo "Install from specific refspec (-b): $COMMIT_ID"
424 duration
=$
((ctime
- SESSION_ID
))
425 url
="http://www.woopra.com/track/ce?project=osm.etsi.org&cookie=${SESSION_ID}"
426 #url="${url}&ce_campaign_name=${CAMPAIGN_NAME}"
428 [ -n "$INSTALL_FROM_SOURCE" ] && event_name
="src"
429 [ -n "$INSTALL_FROM_LXDIMAGES" ] && event_name
="lxd"
430 event_name
="${event_name}_$1"
431 url
="${url}&event=${event_name}&ce_duration=${duration}"
432 wget
-q -O /dev
/null
$url
445 INSTALL_FROM_SOURCE
=""
446 RELEASE
="-R ReleaseTHREE"
447 INSTALL_FROM_LXDIMAGES
=""
448 LXD_REPOSITORY_BASE
="https://osm-download.etsi.org/repository/osm/lxd"
451 SESSION_ID
=`date +%s`
453 while getopts ":hy-:b:r:k:u:R:l:" o
; do
462 REPOSITORY
="-r ${OPTARG}"
465 RELEASE
="-R ${OPTARG}"
468 REPOSITORY_KEY
="-k ${OPTARG}"
471 REPOSITORY_BASE
="-u ${OPTARG}"
474 LXD_REPOSITORY_BASE
="${OPTARG}"
477 [ "${OPTARG}" == "help" ] && usage
&& exit 0
478 [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE
="y" && continue
479 [ "${OPTARG}" == "develop" ] && DEVELOP
="y" && continue
480 [ "${OPTARG}" == "uninstall" ] && UNINSTALL
="y" && continue
481 [ "${OPTARG}" == "nat" ] && NAT
="y" && continue
482 [ "${OPTARG}" == "update" ] && UPDATE
="y" && continue
483 [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE
="y" && continue
484 [ "${OPTARG}" == "test" ] && TEST_INSTALLER
="y" && continue
485 [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD
="y" && continue
486 [ "${OPTARG}" == "lxdimages" ] && INSTALL_FROM_LXDIMAGES
="y" && continue
487 [ "${OPTARG}" == "noconfigure" ] && NOCONFIGURE
="y" && continue
488 [ "${OPTARG}" == "showopts" ] && SHOWOPTS
="y" && continue
489 echo -e "Invalid option: '--$OPTARG'\n" >&2
493 echo -e "Invalid option: '-$OPTARG'\n" >&2
505 if [ -n "$SHOWOPTS" ]; then
510 # if develop, we force master
511 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID
="master"
513 # forcing source from master removed. Now only install from source when explicit
514 # [ -n "$COMMIT_ID" ] && [ "$COMMIT_ID" == "master" ] && INSTALL_FROM_SOURCE="y"
516 if [ -n "$TEST_INSTALLER" ]; then
517 echo -e "\nUsing local devops repo for OSM installation"
518 TEMPDIR
="$(dirname $(realpath $(dirname $0)))"
520 echo -e "\nCreating temporary dir for OSM installation"
521 TEMPDIR
="$(mktemp -d -q --tmpdir "installosm.XXXXXX
")"
522 trap 'rm -rf "$TEMPDIR"' EXIT
525 need_packages
="git jq"
526 for package
in $need_packages; do
527 echo -e "Checking required packages: $package"
528 dpkg
-l $package &>/dev
/null \
529 ||
! echo -e " $package not installed.\nInstalling $package requires root privileges" \
530 || sudo apt-get
install -y $package \
531 || FATAL
"failed to install $package"
534 if [ -z "$TEST_INSTALLER" ]; then
535 echo -e "\nCloning devops repo temporarily"
536 git clone https
://osm.etsi.org
/gerrit
/osm
/devops.git
$TEMPDIR
540 echo -e "\nGuessing the current stable release"
541 LATEST_STABLE_DEVOPS
=`git -C $TEMPDIR tag -l v[0-9].* | sort -V | tail -n1`
542 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
543 echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
544 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID
="tags/$LATEST_STABLE_DEVOPS"
545 [ -z "$TEST_INSTALLER" ] && git
-C $TEMPDIR checkout tags
/$LATEST_STABLE_DEVOPS
548 OSM_JENKINS
="$TEMPDIR/jenkins"
549 .
$OSM_JENKINS/common
/all_funcs
551 [ -n "$UNINSTALL" ] && uninstall
&& echo -e "\nDONE" && exit 0
552 [ -n "$NAT" ] && nat
&& echo -e "\nDONE" && exit 0
553 [ -n "$UPDATE" ] && update
&& echo -e "\nDONE" && exit 0
554 [ -n "$RECONFIGURE" ] && configure
&& echo -e "\nDONE" && exit 0
556 #Installation starts here
557 echo -e "\nInstalling OSM from refspec: $COMMIT_ID"
558 if [ -n "$INSTALL_FROM_SOURCE" ] && [ -z "$ASSUME_YES" ]; then
559 ! ask_user
"The installation will take about 75-90 minutes. Continue (Y/n)? " y
&& echo "Cancelled!" && exit 1
562 echo -e "\nChecking required packages: wget, curl, tar"
563 dpkg
-l wget curl
tar &>/dev
/null ||
! echo -e " One or several packages are not installed.\nInstalling required packages\n Root privileges are required" || sudo apt-get
install -y wget curl
tar
565 echo -e "Checking required packages: lxd"
566 lxd
--version &>/dev
/null || FATAL
"lxd not present, exiting."
567 [ -n "$INSTALL_LXD" ] && echo -e "\nInstalling and configuring lxd" && install_lxd
569 wget
-q -O- https
://osm-download.etsi.org
/ftp
/osm-3.0
-three/README.txt
&> /dev
/null
572 # use local devops for containers
573 export OSM_USE_LOCAL_DEVOPS
=true
574 if [ -n "$INSTALL_FROM_SOURCE" ]; then #install from source
575 echo -e "\nCreating the containers and building from source ..."
576 $OSM_DEVOPS/jenkins
/host
/start_build RO
--notest checkout
$COMMIT_ID || FATAL
"RO container build failed (refspec: '$COMMIT_ID')"
578 $OSM_DEVOPS/jenkins
/host
/start_build VCA || FATAL
"VCA container build failed"
579 vca_is_up
&& track VCA
580 $OSM_DEVOPS/jenkins
/host
/start_build SO checkout
$COMMIT_ID || FATAL
"SO container build failed (refspec: '$COMMIT_ID')"
581 $OSM_DEVOPS/jenkins
/host
/start_build UI checkout
$COMMIT_ID || FATAL
"UI container build failed (refspec: '$COMMIT_ID')"
582 #so_is_up && track SOUI
584 elif [ -n "$INSTALL_FROM_LXDIMAGES" ]; then #install from LXD images stored in OSM repo
585 echo -e "\nInstalling from lxd images ..."
586 install_from_lxdimages
587 else #install from binaries
588 echo -e "\nCreating the containers and installing from binaries ..."
589 $OSM_DEVOPS/jenkins
/host
/install RO
$REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL
"RO install failed"
591 $OSM_DEVOPS/jenkins
/host
/start_build VCA || FATAL
"VCA install failed"
592 vca_is_up
&& track VCA
593 $OSM_DEVOPS/jenkins
/host
/install SO
$REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL
"SO install failed"
594 $OSM_DEVOPS/jenkins
/host
/install UI
$REPOSITORY $RELEASE $REPOSITORY_KEY $REPOSITORY_BASE || FATAL
"UI install failed"
595 #so_is_up && track SOUI
599 #Install iptables-persistent and configure NAT rules
600 [ -z "$NOCONFIGURE" ] && nat
602 #Configure components
603 [ -z "$NOCONFIGURE" ] && configure
606 [ -z "$NOCONFIGURE" ] && install_osmclient
608 wget
-q -O- https
://osm-download.etsi.org
/ftp
/osm-3.0
-three/README2.txt
&> /dev
/null