installers/install_from_source.sh

   1 #!/bin/bash
   2 #   Copyright 2016 Telefónica Investigación y Desarrollo S.A.U.
   3 #
   4 #   Licensed under the Apache License, Version 2.0 (the "License");
   5 #   you may not use this file except in compliance with the License.
   6 #   You may obtain a copy of the License at
   7 #
   8 #       http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 #   Unless required by applicable law or agreed to in writing, software
  11 #   distributed under the License is distributed on an "AS IS" BASIS,
  12 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 #   See the License for the specific language governing permissions and
  14 #   limitations under the License.
  15
  16 function usage(){
  17     echo -e "usage: $0 [OPTIONS]"
  18     echo -e "Install OSM from source code"
  19     echo -e "  OPTIONS"
  20     echo -e "     --uninstall:   uninstall OSM: remove the containers and delete NAT rules"
  21     echo -e "     -b <branch>:   install OSM from source code using a specific branch (master, v1.0, ...)"
  22     echo -e "                    -b master"
  23     echo -e "                    -b v1.0"
  24     echo -e "                    ..."
  25     echo -e "     --develop:     (deprecated, use '-b master') install OSM from source code using the master branch"
  26     echo -e "     --nat:         install only NAT rules"
  27     echo -e "     --update:      update to the latest stable release or to the latest commit if using a specific branch"
  28     echo -e "     --showopts:    show current options"
  29     echo -e "     -h / --help:   print this help"
  30 }
  31
  32 #Uninstall OSM: remove containers
  33 function uninstall(){
  34     if [ $RC_CLONE ] || [ -n "$TEST_INSTALLER" ]; then
  35         $OSM_DEVOPS/jenkins/host/clean_container RO
  36         $OSM_DEVOPS/jenkins/host/clean_container VCA
  37         $OSM_DEVOPS/jenkins/host/clean_container SO
  38         #$OSM_DEVOPS/jenkins/host/clean_container UI
  39     else
  40         lxc stop RO && lxc delete RO
  41         lxc stop VCA && lxc delete VCA
  42         lxc stop SO-ub && lxc delete SO-ub
  43     fi
  44 }
  45
  46 #Configure NAT rules, based on the current IP addresses of containers
  47 function nat(){
  48     echo -e "\nChecking required packages: iptables-persistent"
  49     dpkg -l iptables-persistent &>/dev/null || ! echo -e "    Not installed.\nInstalling iptables-persistent requires root privileges" || \
  50     sudo DEBIAN_FRONTEND=noninteractive apt-get -yq install iptables-persistent
  51     echo -e "\nConfiguring NAT rules"
  52     echo -e "   Required root privileges"
  53     sudo $OSM_DEVOPS/installers/nat_osm
  54 }
  55
  56 #Update RO, SO and UI:
  57 function update(){
  58     echo -e "\nUpdating components"
  59
  60     echo -e "     Updating RO"
  61     CONTAINER="RO"
  62     MDG="RO"
  63     INSTALL_FOLDER="/opt/openmano"
  64     echo -e "     Fetching the repo"
  65     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
  66     BRANCH=""
  67     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
  68     [ -z "$BRANCH" ] && echo "        Could not find the current branch in use in the $MDG" && exit 1
  69     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
  70     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
  71     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
  72     # COMMIT_ID either was  previously set with -b option, or is an empty string
  73     CHECKOUT_ID=$COMMIT_ID
  74     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
  75     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
  76     if [[ $CHECKOUT_ID == "tags/"* ]]; then
  77         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
  78     else
  79         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
  80     fi
  81     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
  82     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
  83         echo "         Nothing to be done."
  84     else
  85         echo "         Update required."
  86         lxc exec $CONTAINER -- service openmano stop
  87         lxc exec $CONTAINER -- git -C /opt/openmano stash
  88         lxc exec $CONTAINER -- git -C /opt/openmano pull --rebase
  89         lxc exec $CONTAINER -- git -C /opt/openmano checkout $CHECKOUT_ID
  90         lxc exec $CONTAINER -- git -C /opt/openmano stash pop
  91         lxc exec $CONTAINER -- /opt/openmano/database_utils/migrate_mano_db.sh
  92         lxc exec $CONTAINER -- service openmano start
  93     fi
  94     echo
  95
  96     echo -e "     Updating SO and UI"
  97     CONTAINER="SO-ub"
  98     MDG="SO"
  99     INSTALL_FOLDER=""   # To be filled in
 100     echo -e "     Fetching the repo"
 101     lxc exec $CONTAINER -- git -C $INSTALL_FOLDER fetch --all
 102     BRANCH=""
 103     BRANCH=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status -sb | head -n1 | sed -n 's/^## \(.*\).*/\1/p'|awk '{print $1}' |sed 's/\(.*\)\.\.\..*/\1/'`
 104     [ -z "$BRANCH" ] && echo "        Could not find the current branch in use in the $MDG" && exit 1
 105     CURRENT=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER status |head -n1`
 106     CURRENT_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse HEAD`
 107     echo "         FROM: $CURRENT ($CURRENT_COMMIT_ID)"
 108     # COMMIT_ID either was  previously set with -b option, or is an empty string
 109     CHECKOUT_ID=$COMMIT_ID
 110     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" == "HEAD" ] && CHECKOUT_ID="tags/$LATEST_STABLE_DEVOPS"
 111     [ -z "$CHECKOUT_ID" ] && [ "$BRANCH" != "HEAD" ] && CHECKOUT_ID="$BRANCH"
 112     if [[ $CHECKOUT_ID == "tags/"* ]]; then
 113         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-list -n 1 $CHECKOUT_ID`
 114     else
 115         REMOTE_COMMIT_ID=`lxc exec $CONTAINER -- git -C $INSTALL_FOLDER rev-parse origin/$CHECKOUT_ID`
 116     fi
 117     echo "         TO: $CHECKOUT_ID ($REMOTE_COMMIT_ID)"
 118     if [ "$CURRENT_COMMIT_ID" == "$REMOTE_COMMIT_ID" ]; then
 119         echo "         Nothing to be done."
 120     else
 121         echo "         Update required."
 122         # Instructions to be added
 123         # lxc exec SO-ub -- ...
 124     fi
 125     echo
 126 }
 127
 128 #Configure VCA, SO and RO with the initial configuration:
 129 #  RO -> tenant:osm, logs to be sent to SO
 130 #  VCA -> juju-password
 131 #  SO -> route to Juju Controller, add RO account, add VCA account
 132 function configure(){
 133     #Configure components
 134     echo -e "\nConfiguring components"
 135     . $OSM_DEVOPS/installers/export_ips
 136
 137     echo -e "       Configuring RO"
 138     lxc exec RO -- sed -i -e "s/^\#\?log_socket_host:.*/log_socket_host: $SO_CONTAINER_IP/g" /opt/openmano/openmanod.cfg
 139     lxc exec RO -- service openmano restart
 140     time=0; step=2; timelength=20; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
 141     lxc exec RO -- openmano tenant-delete -f osm >/dev/null
 142     RO_TENANT_ID=`lxc exec RO -- openmano tenant-create osm |awk '{print $1}'`
 143
 144     echo -e "       Configuring VCA"
 145     JUJU_PASSWD=`date +%s | sha256sum | base64 | head -c 32`
 146     echo -e "$JUJU_PASSWD\n$JUJU_PASSWD" | lxc exec VCA -- juju change-user-password
 147     JUJU_CONTROLLER_IP=`lxc exec VCA -- lxc list -c 4 |grep eth0 |awk '{print $2}'`
 148
 149     echo -e "       Configuring SO"
 150     sudo route add -host $JUJU_CONTROLLER_IP gw $VCA_CONTAINER_IP
 151     lxc exec SO-ub -- nohup sudo -b -H /usr/rift/rift-shell -r -i /usr/rift -a /usr/rift/.artifacts -- ./demos/launchpad.py --use-xml-mode &
 152     time=0; step=30; timelength=300; while [ $time -le $timelength ]; do sleep $step; echo -n "."; time=$((time+step)); done; echo
 153
 154     curl -k --request POST \
 155       --url https://$SO_CONTAINER_IP:8008/api/config/config-agent \
 156       --header 'accept: application/vnd.yang.data+json' \
 157       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 158       --header 'cache-control: no-cache' \
 159       --header 'content-type: application/vnd.yang.data+json' \
 160       --data '{"account": [ { "name": "osmjuju", "account-type": "juju", "juju": { "ip-address": "'$JUJU_CONTROLLER_IP'", "port": "17070", "user": "admin", "secret": "'$JUJU_PASSWD'" }  }  ]}'
 161
 162     curl -k --request PUT \
 163       --url https://$SO_CONTAINER_IP:8008/api/config/resource-orchestrator \
 164       --header 'accept: application/vnd.yang.data+json' \
 165       --header 'authorization: Basic YWRtaW46YWRtaW4=' \
 166       --header 'cache-control: no-cache' \
 167       --header 'content-type: application/vnd.yang.data+json' \
 168       --data '{ "openmano": { "host": "'$RO_CONTAINER_IP'", "port": "9090", "tenant-id": "'$RO_TENANT_ID'" }, "name": "osmopenmano", "account-type": "openmano" }'
 169
 170 }
 171
 172 function install_lxd() {
 173     lxd init --auto
 174     lxd waitready
 175     systemctl stop lxd-bridge
 176     systemctl --system daemon-reload
 177     systemctl enable lxd-bridge
 178     systemctl start lxd-bridge
 179 }
 180
 181
 182 UNINSTALL=""
 183 DEVELOP=""
 184 NAT=""
 185 UPDATE=""
 186 RECONFIGURE=""
 187 TEST_INSTALLER=""
 188 LXD=""
 189 SHOWOPTS=""
 190 COMMIT_ID=""
 191
 192 while getopts ":h-:b:" o; do
 193     case "${o}" in
 194         h)
 195             usage && exit 0
 196             ;;
 197         b)
 198             COMMIT_ID=${OPTARG}
 199             ;;
 200         -)
 201             [ "${OPTARG}" == "help" ] && usage && exit 0
 202             [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
 203             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 204             [ "${OPTARG}" == "nat" ] && NAT="y" && continue
 205             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 206             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 207             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 208             [ "${OPTARG}" == "lxd" ] && LXD="y" && continue
 209             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 210             echo -e "Invalid option: '--$OPTARG'\n" >&2
 211             usage && exit 1
 212             ;;
 213         \?)
 214             echo -e "Invalid option: '-$OPTARG'\n" >&2
 215             usage && exit 1
 216             ;;
 217         *)
 218             usage && exit 1
 219             ;;
 220     esac
 221 done
 222
 223 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
 224 [ -n "$TEST_INSTALLER" ] && [ -z "$COMMIT_ID" ]  && echo "Use -b option to specify the branch to use for the test (e.g.: v1.0)" && exit 0
 225
 226 if [ -n "$TEST_INSTALLER" ]; then
 227     echo -e "\nUsing local devops repo for OSM installation"
 228     TEMPDIR="$(dirname $(realpath $(dirname $0)))"
 229 else
 230     echo -e "\nCreating temporary dir for OSM installation"
 231     TEMPDIR="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 232     trap 'rm -rf "$TEMPDIR"' EXIT
 233 fi
 234
 235 echo -e "Checking required packages: git"
 236 dpkg -l git &>/dev/null || ! echo -e "     git not installed.\nInstalling git requires root privileges" || sudo apt install -y git
 237 if [ -z "$TEST_INSTALLER" ]; then
 238     echo -e "\nCloning devops repo temporarily"
 239     git clone https://osm.etsi.org/gerrit/osm/devops.git $TEMPDIR
 240     RC_CLONE=$?
 241 fi
 242
 243 echo -e "\nGuessing the current stable release"
 244 LATEST_STABLE_DEVOPS=`git -C $TEMPDIR tag -l v[0-9].* | tail -n1`
 245 [ -z "$COMMIT_ID" ] && [ -z "$LATEST_STABLE_DEVOPS" ] && echo "Could not find the current latest stable release" && exit 0
 246
 247 if [ -n "$SHOWOPTS" ]; then
 248     echo "DEVELOP=$DEVELOP"
 249     echo "UNINSTALL=$UNINSTALL"
 250     echo "NAT=$NAT"
 251     echo "UPDATE=$UPDATE"
 252     echo "RECONFIGURE=$RECONFIGURE"
 253     echo "TEST_INSTALLER=$TEST_INSTALLER"
 254     echo "LXD=$LXD"
 255     echo "SHOWOPTS=$SHOWOPTS"
 256     echo "Latest tag in devops repo: $LATEST_STABLE_DEVOPS"
 257     echo "Commit to be installed (-b): $COMMIT_ID"
 258     exit 0
 259 fi
 260
 261 OSM_DEVOPS=$TEMPDIR
 262 OSM_JENKINS="$TEMPDIR/jenkins"
 263 . $OSM_JENKINS/common/all_funcs
 264
 265 [ -n "$UNINSTALL" ] && uninstall && echo -e "\nDONE" && exit 0
 266 [ -n "$NAT" ] && nat && echo -e "\nDONE" && exit 0
 267 [ -n "$UPDATE" ] && update && echo -e "\nDONE" && exit 0
 268 [ -n "$RECONFIGURE" ] && configure && echo -e "\nDONE" && exit 0
 269
 270 #Installation starts here
 271 [ -z "$COMMIT_ID" ] && [ -n "$LATEST_STABLE_DEVOPS" ] && COMMIT_ID="tags/$LATEST_STABLE_DEVOPS"
 272 echo -e "\n Installing OSM from refspec: $COMMIT_ID"
 273
 274 wget -q -O- https://osm-download.etsi.org/ftp/osm-1.0-one/README.txt &> /dev/null
 275
 276 [ -n "$LXD" ] && echo -e "\nConfiguring lxd" && install_lxd
 277
 278 echo -e "\nChecking required packages: wget, curl, tar"
 279 dpkg -l wget curl tar &>/dev/null || ! echo -e "    One or several packages are not installed.\nInstalling required packages\n     Root privileges are required" || sudo apt install -y wget curl tar
 280
 281 echo -e "\nCreating the containers and building ..."
 282 $OSM_DEVOPS/jenkins/host/start_build RO checkout $COMMIT_ID
 283 $OSM_DEVOPS/jenkins/host/start_build VCA
 284 $OSM_DEVOPS/jenkins/host/start_build SO checkout $COMMIT_ID
 285 $OSM_DEVOPS/jenkins/host/start_build UI checkout $COMMIT_ID
 286
 287 #Install iptables-persistent and configure NAT rules
 288 nat
 289
 290 #Configure components
 291 configure
 292
 293 echo -e "\nDONE"
 294
 295