3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at
7 # http://www.apache.org/licenses/LICENSE-2.0
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
17 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
18 echo -e "usage: $0 [OPTIONS]"
21 echo -e " -h / --help: print this help"
22 echo -e " -y: do not prompt for confirmation, assumes yes"
23 echo -e " -r <repo>: use specified repository name for osm packages"
24 echo -e " -R <release>: use specified release for osm binaries (deb packages, lxd images, ...)"
25 echo -e " -u <repo base>: use specified repository url for osm packages"
26 echo -e " -k <repo key>: use specified repository public key url"
27 echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag"
28 echo -e " -b master (main dev branch)"
29 echo -e " -b v2.0 (v2.0 branch)"
30 echo -e " -b tags/v1.1.0 (a specific tag)"
32 echo -e " -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
33 echo -e " -c <kubernetes engine>: use a specific kubernetes engine (options: kubeadm, k3s, microk8s), default is kubeadm"
34 echo -e " -s <namespace> namespace when installed using k8s, default is osm"
35 echo -e " -H <VCA host> use specific juju host controller IP"
36 echo -e " -S <VCA secret> use VCA/juju secret key"
37 echo -e " -P <VCA pubkey> use VCA/juju public key file"
38 echo -e " -A <VCA apiproxy> use VCA/juju API proxy"
39 echo -e " --pla: install the PLA module for placement support"
40 echo -e " --old-sa: install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
41 echo -e " --ng-sa: install new Service Assurance framework (Airflow, AlertManager and Pushgateway) (enabled by default)"
42 echo -e " -m <MODULE>: install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
43 echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
44 echo -e " -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
45 echo -e " -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
46 echo -e " -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
47 echo -e " -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
48 echo -e " -D <devops path> use local devops installation path"
49 echo -e " -w <work dir> Location to store runtime installation"
50 echo -e " -t <docker tag> specify osm docker tag (default is latest)"
51 echo -e " -l: LXD cloud yaml file"
52 echo -e " -L: LXD credentials yaml file"
53 echo -e " -K: Specifies the name of the controller to use - The controller must be already bootstrapped"
54 echo -e " -d <docker registry URL> use docker registry URL instead of dockerhub"
55 echo -e " -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
56 echo -e " -T <docker tag> specify docker tag for the modules specified with option -m"
57 echo -e " --debug: debug mode"
58 echo -e " --nocachelxdimages: do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
59 echo -e " --cachelxdimages: cache local lxd images, create cronjob for that cache (will make installation longer)"
60 echo -e " --nolxd: do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
61 echo -e " --nodocker: do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
62 echo -e " --nojuju: do not juju, assumes already installed"
63 echo -e " --nodockerbuild:do not build docker images (use existing locally cached images)"
64 echo -e " --nohostports: do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
65 echo -e " --nohostclient: do not install the osmclient"
66 echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
67 echo -e " --source: install OSM from source code using the latest stable tag"
68 echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
69 echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano"
70 echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana"
71 echo -e " --volume: create a VM volume when installing to OpenStack"
72 echo -e " --showopts: print chosen options and exit (only for debugging)"
73 echo -e " --charmed: Deploy and operate OSM with Charms on k8s"
74 echo -e " [--bundle <bundle path>]: Specify with which bundle to deploy OSM with charms (--charmed option)"
75 echo -e " [--k8s <kubeconfig path>]: Specify with which kubernetes to deploy OSM with charms (--charmed option)"
76 echo -e " [--vca <name>]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
77 echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
78 echo -e " [--lxd <yaml path>]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
79 echo -e " [--lxd-cred <yaml path>]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
80 echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)"
81 echo -e " [--overlay]: Add an overlay to override some defaults of the default bundle (--charmed option)"
82 echo -e " [--ha]: Installs High Availability bundle. (--charmed option)"
83 echo -e " [--tag]: Docker image tag. (--charmed option)"
84 echo -e " [--registry]: Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
85 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
88 # takes a juju/accounts.yaml file and returns the password specific
89 # for a controller. I wrote this using only bash tools to minimize
90 # additions of other packages
91 function parse_juju_password
{
92 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
93 password_file
="${HOME}/.local/share/juju/accounts.yaml"
94 local controller_name
=$1
95 local s
='[[:space:]]*' w
='[a-zA-Z0-9_-]*' fs
=$
(echo @|
tr @
'\034')
96 sed -ne "s|^\($s\):|\1|" \
97 -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
98 -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
99 awk -F$fs -v controller
=$controller_name '{
100 indent = length($1)/2;
102 for (i in vname) {if (i > indent) {delete vname[i]}}
103 if (length($3) > 0) {
104 vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
105 if (match(vn,controller) && match($2,"password")) {
110 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
113 function set_vca_variables
() {
114 OSM_VCA_CLOUDNAME
="lxd-cloud"
115 [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME
="localhost"
116 if [ -z "$OSM_VCA_HOST" ]; then
117 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST
=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
118 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST
=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
119 [ -z "$OSM_VCA_HOST" ] && FATAL
"Cannot obtain juju controller IP address"
121 if [ -z "$OSM_VCA_SECRET" ]; then
122 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET
=$
(parse_juju_password
$OSM_NAMESPACE)
123 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET
=$
(parse_juju_password
$CONTROLLER_NAME)
124 [ -z "$OSM_VCA_SECRET" ] && FATAL
"Cannot obtain juju secret"
126 if [ -z "$OSM_VCA_PUBKEY" ]; then
127 OSM_VCA_PUBKEY
=$
(cat $HOME/.local
/share
/juju
/ssh
/juju_id_rsa.pub
)
128 [ -z "$OSM_VCA_PUBKEY" ] && FATAL
"Cannot obtain juju public key"
130 if [ -z "$OSM_VCA_CACERT" ]; then
131 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT
=$
(juju controllers
--format json | jq
-r --arg controller
$OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 |
tr -d \\n
)
132 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT
=$
(juju controllers
--format json | jq
-r --arg controller
$CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 |
tr -d \\n
)
133 [ -z "$OSM_VCA_CACERT" ] && FATAL
"Cannot obtain juju CA certificate"
137 function generate_secret
() {
138 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
139 head /dev
/urandom |
tr -dc A-Za-z0-9 |
head -c 32
140 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
143 function check_packages
() {
145 echo -e "Checking required packages: ${NEEDED_PACKAGES}"
146 for PACKAGE
in ${NEEDED_PACKAGES} ; do
148 if [ $?
-ne 0 ]; then
149 echo -e "Package ${PACKAGE} is not installed."
150 echo -e "Updating apt-cache ..."
152 echo -e "Installing ${PACKAGE} ..."
153 sudo apt-get
install -y ${PACKAGE} || FATAL
"failed to install ${PACKAGE}"
156 echo -e "Required packages are present: ${NEEDED_PACKAGES}"
160 # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
161 # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
162 # Return: true(0) if user type 'yes'; false (1) if user type 'no'
163 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
164 read -e -p "$1" USER_CONFIRMATION
166 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
167 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
168 [ "${USER_CONFIRMATION,,}" == "yes" ] ||
[ "${USER_CONFIRMATION,,}" == "y" ] && return 0
169 [ "${USER_CONFIRMATION,,}" == "no" ] ||
[ "${USER_CONFIRMATION,,}" == "n" ] && return 1
170 read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
172 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
175 function install_osmclient
(){
176 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
177 CLIENT_RELEASE
=${RELEASE#"-R "}
178 CLIENT_REPOSITORY_KEY
="OSM%20ETSI%20Release%20Key.gpg"
179 CLIENT_REPOSITORY
=${REPOSITORY#"-r "}
180 CLIENT_REPOSITORY_BASE
=${REPOSITORY_BASE#"-u "}
181 key_location
=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
182 curl
$key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE
=1 apt-key add
-
183 sudo add-apt-repository
-y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
184 sudo apt-get
-y update
185 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y python3-pip
186 sudo
-H LC_ALL
=C python3
-m pip
install -U pip
187 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y python3-osm-im python3-osmclient
188 if [ -f /usr
/lib
/python
3/dist-packages
/osm_im
/requirements.txt
]; then
189 python3
-m pip
install -r /usr
/lib
/python
3/dist-packages
/osm_im
/requirements.txt
191 if [ -f /usr
/lib
/python
3/dist-packages
/osmclient
/requirements.txt
]; then
192 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y libmagic1
193 python3
-m pip
install -r /usr
/lib
/python
3/dist-packages
/osmclient
/requirements.txt
195 [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME
=`lxc list | awk '($2=="SO-ub"){print $6}'`
196 [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME
=`lxc list | awk '($2=="RO"){print $6}'`
197 echo -e "\nOSM client installed"
198 if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
199 echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
200 echo " export OSM_HOSTNAME=${OSM_HOSTNAME}"
201 echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
203 echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
204 echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
205 echo " export OSM_HOSTNAME=<OSM_host>"
207 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
211 function docker_login
() {
212 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
214 [ -z "${DEBUG_INSTALL}" ] || DEBUG
"Docker registry user: ${DOCKER_REGISTRY_USER}"
215 sg docker
-c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
216 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
219 function generate_docker_images
() {
220 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
221 echo "Generating docker images"
222 _build_from
=$COMMIT_ID
223 [ -z "$_build_from" ] && _build_from
="latest"
224 echo "OSM Docker images generated from $_build_from"
225 LWTEMPDIR
="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX
")"
226 trap 'rm -rf "${LWTEMPDIR}"' EXIT
227 for module
in MON POL NBI KEYSTONE RO LCM NG-UI PLA
; do
228 if [ -z "$TO_REBUILD" ] ||
echo $TO_REBUILD |
grep -q ${module} ; then
229 module_lower
=${module,,}
230 if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
233 git
-C ${LWTEMPDIR} clone https
://osm.etsi.org
/gerrit
/osm
/$module
234 git
-C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
235 sg docker
-c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
238 if [ -z "$TO_REBUILD" ] ||
echo $TO_REBUILD |
grep -q osmclient
; then
239 BUILD_ARGS
+=(--build-arg REPOSITORY
="$REPOSITORY")
240 BUILD_ARGS
+=(--build-arg RELEASE
="$RELEASE")
241 BUILD_ARGS
+=(--build-arg REPOSITORY_KEY
="$REPOSITORY_KEY")
242 BUILD_ARGS
+=(--build-arg REPOSITORY_BASE
="$REPOSITORY_BASE")
243 sg docker
-c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
245 echo "Finished generation of docker images"
246 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
249 function cmp_overwrite
() {
250 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
253 if ! $
(cmp "${file1}" "${file2}" >/dev
/null
2>&1); then
254 if [ -f "${file2}" ]; then
255 ask_user
"The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
257 cp -b ${file1} ${file2}
260 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
263 #deploys osm pods and services
264 function deploy_osm_services() {
265 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
266 # helm is already installed as part of install_kubeadm_cluster.sh
268 # Generate helm values to be passed with -f osm-values.yaml
269 sudo mkdir -p ${OSM_HELM_WORK_DIR}
270 if [ -n "${INSTALL_JUJU}" ]; then
271 sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
273 pubkey: \"${OSM_VCA_PUBKEY}\"
277 # Generate helm values to be passed with --set
279 # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret
=false
"
280 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
281 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath
=${OSM_NAMESPACE_VOL}"
282 if [ -n "${INSTALL_JUJU}" ]; then
283 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.enabled
=true
"
284 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.
host=${OSM_VCA_HOST}"
285 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret
=${OSM_VCA_SECRET}"
286 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert
=${OSM_VCA_CACERT}"
288 [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY
=${OSM_VCA_APIPROXY}"
289 [ ! "$OSM_DOCKER_TAG" == "testing-daily
" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set-string global.image.tag
=${OSM_DOCKER_TAG}"
290 [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance
=true
"
291 if [ -n "${OSM_BEHIND_PROXY}" ]; then
292 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy
=true
"
293 [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=\"${HTTP_PROXY}\""
294 [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=\"${HTTPS_PROXY}\""
295 if [ -n "${NO_PROXY}" ]; then
296 if [[ ! "${NO_PROXY}" =~ .*".svc
".* ]]; then
297 NO_PROXY="${NO_PROXY},.svc
"
299 if [[ ! "${NO_PROXY}" =~ .*".cluster.
local".* ]]; then
300 NO_PROXY="${NO_PROXY},.cluster.
local"
302 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY
=\"${NO_PROXY//,/\,}\""
306 if [ -n "${INSTALL_JUJU}" ]; then
307 OSM_HELM_OPTS="-f ${OSM_HELM_WORK_DIR}/osm-values.yaml
${OSM_HELM_OPTS}"
309 echo "helm
install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers
/helm
/osm
${OSM_HELM_OPTS}"
310 helm install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}
311 # Override existing values.yaml with the final values.yaml used to install OSM
312 helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
313 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
316 #deploy charmed services
317 function deploy_charmed_services() {
318 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
319 juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
320 juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable
321 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
325 function deploy_mongodb() {
326 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
327 MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
328 [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
329 $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
330 FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed
"
331 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
334 function install_osm_ngsa_service() {
335 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
336 NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
337 [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
338 $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
339 FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed
"
340 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
343 function add_local_k8scluster() {
344 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
345 /usr/bin/osm --all-projects vim-create \
346 --name _system-osm-vim \
347 --account_type dummy \
348 --auth_url http://dummy \
349 --user osm --password osm --tenant osm \
350 --description "dummy
" \
351 --config '{management_network_name: mgmt}'
352 /usr/bin/osm --all-projects k8scluster-add \
353 --creds ${HOME}/.kube/config \
354 --vim _system-osm-vim \
355 --k8s-nets '{"net1
": null}' \
357 --description "OSM Internal Cluster
" \
359 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
362 function configure_apt_proxy() {
363 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
365 OSM_APT_PROXY_FILE="/etc
/apt
/apt.conf.d
/osm-apt
"
366 echo "Configuring apt proxy
in file ${OSM_APT_PROXY_FILE}"
367 if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
368 sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
369 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
372 sudo sed -i "s|Proxy.
*|Proxy
\"${OSM_APT_PROXY}\"; }|
" ${OSM_APT_PROXY_FILE}
374 sudo apt-get update || FATAL "Configured apt proxy
, but couldn
't run 'apt-get update
'. Check ${OSM_APT_PROXY_FILE}"
375 track prereq apt_proxy_configured_ok
376 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
379 function ask_proceed() {
380 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
382 [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
383 1. Install and configure LXD
386 4. Disable swap space
387 5. Install and initialize Kubernetes
389 Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
391 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
394 function check_osm_behind_proxy() {
395 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
397 export OSM_BEHIND_PROXY=""
398 export OSM_PROXY_ENV_VARIABLES=""
399 [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
400 [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
401 [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
402 [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
403 [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
404 [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
406 echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
407 echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
409 if [ -n "${OSM_BEHIND_PROXY}" ]; then
410 [ -z "$ASSUME_YES" ] && ! ask_user "
411 The following env variables have been found for the current user:
412 ${OSM_PROXY_ENV_VARIABLES}.
414 This suggests that this machine is behind a proxy and a special configuration is required.
415 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
418 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
419 Depending on the program, the env variables to work behind a proxy might be different
420 (e.g. http_proxy vs HTTP_PROXY).
422 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
423 and HTTPS_PROXY are defined.
425 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
426 those env variables are also set for root user. If you are not sure whether those variables
427 are configured for the root user, you can stop the installation now.
429 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
431 echo "This machine is not behind a proxy"
434 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
437 function find_devops_folder() {
438 if [ -z "$OSM_DEVOPS" ]; then
439 if [ -n "$TEST_INSTALLER" ]; then
440 echo -e "\nUsing local devops repo for OSM installation"
441 OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
443 echo -e "\nCreating temporary dir for OSM installation"
444 OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
445 trap 'rm -rf "$OSM_DEVOPS"' EXIT
446 git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
451 function install_osm() {
452 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
457 check_osm_behind_proxy
458 check_packages "git wget curl tar snapd"
459 if [ -n "${INSTALL_JUJU}" ]; then
460 sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
464 track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
466 track checks checkingroot_ok
467 [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
468 track checks noroot_ok
470 track checks proceed_ok
472 echo "Installing OSM"
474 [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
476 echo "Determining IP address of the interface with the default route"
477 [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print
$5; exit}')
478 [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~
/^
0.0.0.0/ {print
$8; exit}')
479 [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
480 OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a
,"/"); print a
[1]; exit}'`
481 [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
483 # configure apt proxy
484 [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
486 # if lxd is requested, we will install it
487 if [ -n "$INSTALL_LXD" ]; then
488 LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
489 [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
490 $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
493 track prereq prereqok_ok
495 if [ -n "$INSTALL_DOCKER" ] || [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
496 DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
497 [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
498 [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
499 $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
502 track docker_ce docker_ce_ok
504 if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
505 $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
506 FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
507 track k8scluster k8scluster_ok
510 if [ -n "${INSTALL_JUJU}" ]; then
511 JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_CACHELXDIMAGES}"
512 [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
513 [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
514 [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
515 [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
516 [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
517 $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
522 # Deploy OSM services
523 [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
524 track docker_images docker_images_ok
527 track deploy_osm deploy_mongodb_ok
529 track deploy_osm deploy_osm_services_k8s_ok
530 if [ -n "$INSTALL_K8S_MONITOR" ]; then
531 # install OSM MONITORING
532 install_k8s_monitoring
533 track deploy_osm install_k8s_monitoring_ok
535 if [ -n "$INSTALL_NGSA" ]; then
536 # optional NGSA install
537 install_osm_ngsa_service
538 track deploy_osm install_osm_ngsa_ok
541 [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
542 track osmclient osmclient_ok
544 echo -e "Checking OSM health state..."
545 $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
546 (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
547 echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
548 track healthchecks osm_unhealthy didnotconverge)
549 track healthchecks after_healthcheck_ok
552 track final_ops add_local_k8scluster_ok
554 # if lxd is requested, iptables firewall is updated to work with both docker and LXD
555 if [ -n "$INSTALL_LXD" ]; then
556 arrange_docker_default_network_policy
559 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
562 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
566 function install_to_openstack() {
567 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
570 FATAL "OpenStack installer requires a valid external network name"
573 # Install Pip for Python3
574 sudo apt install -y python3-pip python3-venv
575 sudo -H LC_ALL=C python3 -m pip install -U pip
577 # Create a venv to avoid conflicts with the host installation
578 python3 -m venv $OPENSTACK_PYTHON_VENV
580 source $OPENSTACK_PYTHON_VENV/bin/activate
582 # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
583 python -m pip install -U wheel
584 python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
586 # Install the Openstack cloud module (ansible>=2.10)
587 ansible-galaxy collection install openstack.cloud
589 export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
591 OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
593 ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
595 if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
596 ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
599 if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
600 ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
603 # Execute the Ansible playbook based on openrc or clouds.yaml
606 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
607 $OSM_DEVOPS/installers/openstack/site.yml
609 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
610 -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
616 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
620 function arrange_docker_default_network_policy() {
621 echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
622 sudo iptables -I DOCKER-USER -j ACCEPT
623 sudo iptables-save | sudo tee /etc/iptables/rules.v4
624 sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
627 function install_k8s_monitoring() {
628 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
629 # install OSM monitoring
630 sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
631 sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
632 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
635 function dump_vars(){
636 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
637 echo "APT_PROXY_URL=$APT_PROXY_URL"
638 echo "K8S_CLUSTER_ENGINE=$K8S_CLUSTER_ENGINE"
639 echo "DEVELOP=$DEVELOP"
640 echo "DEBUG_INSTALL=$DEBUG_INSTALL"
641 echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
642 echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
643 echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
644 echo "DOCKER_USER=$DOCKER_USER"
645 echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
646 echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
647 echo "INSTALL_JUJU=$INSTALL_JUJU"
648 echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
649 echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
650 echo "INSTALL_LXD=$INSTALL_LXD"
651 echo "INSTALL_NGSA=$INSTALL_NGSA"
652 echo "INSTALL_DOCKER=$INSTALL_DOCKER"
653 echo "INSTALL_ONLY=$INSTALL_ONLY"
654 echo "INSTALL_PLA=$INSTALL_PLA"
655 echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
656 echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
657 echo "NO_HOST_PORTS=$NO_HOST_PORTS"
658 echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
659 echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
660 echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
661 echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
662 echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
663 echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
664 echo "OSM_DEVOPS=$OSM_DEVOPS"
665 echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
666 echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
667 echo "OSM_NAMESPACE=$OSM_NAMESPACE"
668 echo "OSM_VCA_HOST=$OSM_VCA_HOST"
669 echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
670 echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
671 echo "OSM_WORK_DIR=$OSM_WORK_DIR"
672 echo "PULL_IMAGES=$PULL_IMAGES"
673 echo "RECONFIGURE=$RECONFIGURE"
674 echo "RELEASE=$RELEASE"
675 echo "REPOSITORY=$REPOSITORY"
676 echo "REPOSITORY_BASE=$REPOSITORY_BASE"
677 echo "REPOSITORY_KEY=$REPOSITORY_KEY"
678 echo "SHOWOPTS=$SHOWOPTS"
679 echo "TEST_INSTALLER=$TEST_INSTALLER"
680 echo "TO_REBUILD=$TO_REBUILD"
681 echo "UNINSTALL=$UNINSTALL"
682 echo "UPDATE=$UPDATE"
683 echo "Install from specific refspec (-b): $COMMIT_ID"
684 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
687 function parse_docker_registry_url() {
688 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
689 DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); split(a
[1],b
,":"); print b
[1]}')
690 DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); split(a
[1],b
,":"); print b
[2]}')
691 DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); print a
[2]}')
692 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
696 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
697 echo "** Trapped CTRL-C"
698 FATAL "User stopped the installation"
699 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
712 K8S_CLUSTER_ENGINE="kubeadm"
713 INSTALL_FROM_SOURCE=""
717 INSTALL_K8S_MONITOR=""
721 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
722 LXD_REPOSITORY_PATH=""
723 INSTALL_LIGHTWEIGHT="y"
724 INSTALL_TO_OPENSTACK=""
725 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
726 OPENSTACK_PUBLIC_NET_NAME=""
727 OPENSTACK_ATTACH_VOLUME="false"
728 OPENSTACK_SSH_KEY_FILE=""
729 OPENSTACK_USERDATA_FILE=""
730 OPENSTACK_VM_NAME="server-osm"
731 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
736 INSTALL_NOHOSTCLIENT=""
737 INSTALL_CACHELXDIMAGES=""
742 OSM_VCA_CLOUDNAME="localhost"
743 OSM_VCA_K8S_CLOUDNAME="k8scloud"
747 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
748 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
749 OSM_WORK_DIR="/etc/osm"
750 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
751 OSM_HOST_VOL="/var/lib/osm"
752 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
753 OSM_DOCKER_TAG="testing-daily"
754 DOCKER_USER=opensourcemano
757 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
758 PROMETHEUS_TAG=v2.28.1
760 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
761 PROMETHEUS_CADVISOR_TAG=latest
763 OSM_DATABASE_COMMONKEY=
764 ELASTIC_VERSION=6.4.2
765 ELASTIC_CURATOR_VERSION=5.5.4
766 POD_NETWORK_CIDR=10.244.0.0/16
767 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
768 RE_CHECK='^
[a-z0-9
]([-a-z0-9]*[a-z0-9
])?$
'
772 OSM_INSTALLATION_TYPE="Default"
774 while getopts ":a:b:c:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
777 APT_PROXY_URL=${OPTARG}
784 K8S_CLUSTER_ENGINE=${OPTARG}
785 [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ] && continue
786 [ "${K8S_CLUSTER_ENGINE}" == "k3s" ] && continue
787 [ "${K8S_CLUSTER_ENGINE}" == "microk8s" ] && continue
788 echo -e "Invalid argument for -c : ' ${K8S_CLUSTER_ENGINE}'\n" >&2
792 REPOSITORY="${OPTARG}"
793 REPO_ARGS+=(-r "$REPOSITORY")
796 REPOSITORY_KEY="${OPTARG}"
797 REPO_ARGS+=(-k "$REPOSITORY_KEY")
800 REPOSITORY_BASE="${OPTARG}"
801 REPO_ARGS+=(-u "$REPOSITORY_BASE")
805 REPO_ARGS+=(-R "$RELEASE")
808 OSM_DEVOPS="${OPTARG}"
812 [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
813 [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
816 INSTALL_TO_OPENSTACK="y"
817 if [ -n "${OPTARG}" ]; then
818 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
820 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
825 OPENSTACK_SSH_KEY_FILE="${OPTARG}"
828 OPENSTACK_USERDATA_FILE="${OPTARG}"
831 OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
834 [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
835 [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
836 [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
837 [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
838 [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
839 [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
840 [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
841 [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
842 [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
843 [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
844 [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
845 [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
846 [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
847 [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
848 [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
851 OSM_VCA_HOST="${OPTARG}"
854 OSM_VCA_SECRET="${OPTARG}"
857 OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
860 OSM_DOCKER_TAG="${OPTARG}"
861 REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
864 DOCKER_USER="${OPTARG}"
867 OSM_VCA_PUBKEY=$(cat ${OPTARG})
870 OSM_VCA_APIPROXY="${OPTARG}"
873 LXD_CLOUD_FILE="${OPTARG}"
876 LXD_CRED_FILE="${OPTARG}"
879 CONTROLLER_NAME="${OPTARG}"
882 DOCKER_REGISTRY_URL="${OPTARG}"
885 DOCKER_PROXY_URL="${OPTARG}"
888 MODULE_DOCKER_TAG="${OPTARG}"
891 [ "${OPTARG}" == "help" ] && usage && exit 0
892 [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
893 [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
894 [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
895 [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
896 [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
897 [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
898 [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
899 [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
900 [ "${OPTARG}" == "lxd" ] && INSTALL_LXD="y" && continue
901 [ "${OPTARG}" == "nolxd" ] && INSTALL_LXD="" && continue
902 [ "${OPTARG}" == "docker" ] && INSTALL_DOCKER="y" && continue
903 [ "${OPTARG}" == "nodocker" ] && INSTALL_DOCKER="" && continue
904 [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
905 [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
906 [ "${OPTARG}" == "juju" ] && INSTALL_JUJU="y" && continue
907 [ "${OPTARG}" == "nojuju" ] && INSTALL_JUJU="" && continue
908 [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
909 [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
910 [ "${OPTARG}" == "pullimages" ] && continue
911 [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
912 [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
913 [ "${OPTARG}" == "bundle" ] && continue
914 [ "${OPTARG}" == "k8s" ] && continue
915 [ "${OPTARG}" == "lxd-cred" ] && continue
916 [ "${OPTARG}" == "microstack" ] && continue
917 [ "${OPTARG}" == "overlay" ] && continue
918 [ "${OPTARG}" == "only-vca" ] && continue
919 [ "${OPTARG}" == "small-profile" ] && continue
920 [ "${OPTARG}" == "vca" ] && continue
921 [ "${OPTARG}" == "ha" ] && continue
922 [ "${OPTARG}" == "tag" ] && continue
923 [ "${OPTARG}" == "registry" ] && continue
924 [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
925 [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
926 [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
927 [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
928 [ "${OPTARG}" == "nocachelxdimages" ] && continue
929 [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
930 echo -e "Invalid option: '--$OPTARG'\n" >&2
934 echo "Option -$OPTARG requires an argument" >&2
938 echo -e "Invalid option: '-$OPTARG'\n" >&2
953 source $OSM_DEVOPS/common/all_funcs
955 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
956 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
958 # Uninstall if "--uninstall"
959 if [ -n "$UNINSTALL" ]; then
960 if [ -n "$CHARMED" ]; then
961 ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
962 FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
964 ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
965 FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
971 # Installation starts here
973 # Get README and create OSM_TRACK_INSTALLATION_ID
974 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README.txt &> /dev/null
975 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
977 # Get OS info to be tracked
978 os_distro=$(lsb_release -i 2>/dev/null | awk '{print
$3}')
980 os_release=$(lsb_release -r 2>/dev/null | awk '{print
$2}')
982 os_info="${os_distro}_${os_release}"
983 os_info="${os_info// /_}"
985 if [ -n "$CHARMED" ]; then
986 # Charmed installation
987 sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
988 ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
989 FATAL_TRACK charmed_install "charmed_install.sh failed"
990 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
993 elif [ -n "$INSTALL_TO_OPENSTACK" ]; then
994 # Installation to Openstack
995 install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
999 # Community_installer
1000 # Check incompatible options
1001 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
1002 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
1003 # Special cases go first
1004 # if develop, we force master
1005 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
1006 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
1007 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
1008 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
1009 # This is where installation starts