installers/full_install_osm.sh

   1 #!/bin/bash
   2 #
   3 #   Licensed under the Apache License, Version 2.0 (the "License");
   4 #   you may not use this file except in compliance with the License.
   5 #   You may obtain a copy of the License at
   6 #
   7 #       http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #   Unless required by applicable law or agreed to in writing, software
  10 #   distributed under the License is distributed on an "AS IS" BASIS,
  11 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #   See the License for the specific language governing permissions and
  13 #   limitations under the License.
  14 #
  15
  16 function usage(){
  17     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  18     echo -e "usage: $0 [OPTIONS]"
  19     echo -e "Install OSM"
  20     echo -e "  OPTIONS"
  21     echo -e "     -h / --help:    print this help"
  22     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  23     echo -e "     -r <repo>:      use specified repository name for osm packages"
  24     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  25     echo -e "     -u <repo base>: use specified repository url for osm packages"
  26     echo -e "     -k <repo key>:  use specified repository public key url"
  27     echo -e "     -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
  28     echo -e "     -c <kubernetes engine>: use a specific kubernetes engine (options: kubeadm, k3s, microk8s), default is kubeadm"
  29     echo -e "     -s <namespace>  namespace when installed using k8s, default is osm"
  30     echo -e "     -H <VCA host>   use specific juju host controller IP"
  31     echo -e "     -S <VCA secret> use VCA/juju secret key"
  32     echo -e "     -P <VCA pubkey> use VCA/juju public key file"
  33     echo -e "     -A <VCA apiproxy> use VCA/juju API proxy"
  34     echo -e "     --pla:          install the PLA module for placement support"
  35     echo -e "     --old-sa:       install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
  36     echo -e "     --ng-sa:        install new Service Assurance framework (Airflow, AlertManager and Pushgateway)  (enabled by default)"
  37     echo -e "     -o <ADDON>:     ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
  38     echo -e "     -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
  39     echo -e "     -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
  40     echo -e "     -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
  41     echo -e "     -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
  42     echo -e "     -D <devops path> use local devops installation path"
  43     echo -e "     -w <work dir>   Location to store runtime installation"
  44     echo -e "     -t <docker tag> specify osm docker tag (default is latest)"
  45     echo -e "     -l:             LXD cloud yaml file"
  46     echo -e "     -L:             LXD credentials yaml file"
  47     echo -e "     -K:             Specifies the name of the controller to use - The controller must be already bootstrapped"
  48     echo -e "     -d <docker registry URL> use docker registry URL instead of dockerhub"
  49     echo -e "     -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
  50     echo -e "     -T <docker tag> specify docker tag for the modules specified with option -m"
  51     echo -e "     --debug:        debug mode"
  52     echo -e "     --nocachelxdimages:  do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
  53     echo -e "     --cachelxdimages:  cache local lxd images, create cronjob for that cache (will make installation longer)"
  54     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  55     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  56     echo -e "     --nojuju:       do not juju, assumes already installed"
  57     echo -e "     --nohostports:  do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
  58     echo -e "     --nohostclient: do not install the osmclient"
  59     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  60     echo -e "     --k8s_monitor:  install the OSM kubernetes monitoring with prometheus and grafana"
  61     echo -e "     --volume:       create a VM volume when installing to OpenStack"
  62     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  63     echo -e "     --charmed:                   Deploy and operate OSM with Charms on k8s"
  64     echo -e "     [--bundle <bundle path>]:    Specify with which bundle to deploy OSM with charms (--charmed option)"
  65     echo -e "     [--k8s <kubeconfig path>]:   Specify with which kubernetes to deploy OSM with charms (--charmed option)"
  66     echo -e "     [--vca <name>]:              Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
  67     echo -e "     [--small-profile]:           Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
  68     echo -e "     [--lxd <yaml path>]:         Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
  69     echo -e "     [--lxd-cred <yaml path>]:    Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
  70     echo -e "     [--microstack]:              Installs microstack as a vim. (--charmed option)"
  71     echo -e "     [--overlay]:                 Add an overlay to override some defaults of the default bundle (--charmed option)"
  72     echo -e "     [--ha]:                      Installs High Availability bundle. (--charmed option)"
  73     echo -e "     [--tag]:                     Docker image tag. (--charmed option)"
  74     echo -e "     [--registry]:                Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
  75     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
  76 }
  77
  78 # takes a juju/accounts.yaml file and returns the password specific
  79 # for a controller. I wrote this using only bash tools to minimize
  80 # additions of other packages
  81 function parse_juju_password {
  82     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  83     password_file="${HOME}/.local/share/juju/accounts.yaml"
  84     local controller_name=$1
  85     local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034')
  86     sed -ne "s|^\($s\):|\1|" \
  87          -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
  88          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
  89     awk -F$fs -v controller=$controller_name '{
  90         indent = length($1)/2;
  91         vname[indent] = $2;
  92         for (i in vname) {if (i > indent) {delete vname[i]}}
  93         if (length($3) > 0) {
  94             vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
  95             if (match(vn,controller) && match($2,"password")) {
  96                 printf("%s",$3);
  97             }
  98         }
  99     }'
 100     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 101 }
 102
 103 function set_vca_variables() {
 104     OSM_VCA_CLOUDNAME="lxd-cloud"
 105     [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
 106     if [ -z "$OSM_VCA_HOST" ]; then
 107         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 108         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 109         [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 110     fi
 111     if [ -z "$OSM_VCA_SECRET" ]; then
 112         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
 113         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
 114         [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 115     fi
 116     if [ -z "$OSM_VCA_PUBKEY" ]; then
 117         OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub)
 118         [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
 119     fi
 120     if [ -z "$OSM_VCA_CACERT" ]; then
 121         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 122         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 123         [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
 124     fi
 125 }
 126
 127 function generate_secret() {
 128     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 129     head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32
 130     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 131 }
 132
 133 function check_packages() {
 134     NEEDED_PACKAGES="$1"
 135     echo -e "Checking required packages: ${NEEDED_PACKAGES}"
 136     for PACKAGE in ${NEEDED_PACKAGES} ; do
 137         dpkg -L ${PACKAGE}
 138         if [ $? -ne 0 ]; then
 139             echo -e "Package ${PACKAGE} is not installed."
 140             echo -e "Updating apt-cache ..."
 141             sudo apt-get update
 142             echo -e "Installing ${PACKAGE} ..."
 143             sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
 144         fi
 145     done
 146     echo -e "Required packages are present: ${NEEDED_PACKAGES}"
 147 }
 148
 149 function ask_user(){
 150     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 151     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 152     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 153     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 154     read -e -p "$1" USER_CONFIRMATION
 155     while true ; do
 156         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 157         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 158         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 159         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 160         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 161     done
 162     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 163 }
 164
 165 function install_osmclient(){
 166     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 167     CLIENT_RELEASE=${RELEASE#"-R "}
 168     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 169     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 170     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 171     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 172     curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
 173     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
 174     sudo apt-get -y update
 175     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip
 176     sudo -H LC_ALL=C python3 -m pip install -U pip
 177     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient
 178     if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
 179         python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
 180     fi
 181     if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
 182         sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libmagic1
 183         python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
 184     fi
 185     echo -e "\nOSM client installed"
 186     echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
 187     echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
 188     echo "     export OSM_HOSTNAME=nbi.${OSM_DEFAULT_IP}.nip.io"
 189     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 190     return 0
 191 }
 192
 193 function docker_login() {
 194     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 195     echo "Docker login"
 196     [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}"
 197     sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
 198     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 199 }
 200
 201 #deploys osm pods and services
 202 function deploy_osm_services() {
 203     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 204     # Generate helm values to be passed with -f osm-values.yaml
 205     sudo mkdir -p ${OSM_HELM_WORK_DIR}
 206     if [ -n "${INSTALL_JUJU}" ]; then
 207         sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
 208 vca:
 209   pubkey: \"${OSM_VCA_PUBKEY}\"
 210 EOF"
 211     fi
 212
 213     # Generate helm values to be passed with --set
 214     OSM_HELM_OPTS=""
 215     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
 216     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}" # not needed as mysql is now bitnami helm chart
 217
 218     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
 219     [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set-string global.image.tag=${OSM_DOCKER_TAG}"
 220     [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set prometheus.server.sidecarContainers.prometheus-config-sidecar.image=${DOCKER_REGISTRY_URL}${DOCKER_USER}/prometheus:${OSM_DOCKER_TAG}"
 221
 222     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.hostname=${OSM_DEFAULT_IP}.nip.io"
 223     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set grafana.ingress.hosts={grafana.${OSM_DEFAULT_IP}.nip.io}"
 224     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set prometheus.server.ingress.hosts={prometheus.${OSM_DEFAULT_IP}.nip.io}"
 225     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set prometheus.alertmanager.ingress.hosts={alertmanager.${OSM_DEFAULT_IP}.nip.io}"
 226
 227     if [ -n "${INSTALL_JUJU}" ]; then
 228         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.enabled=true"
 229         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
 230         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
 231         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
 232     fi
 233     [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
 234
 235     [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
 236     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 237         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true"
 238         [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=\"${HTTP_PROXY}\""
 239         [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=\"${HTTPS_PROXY}\""
 240         if [ -n "${NO_PROXY}" ]; then
 241             if [[ ! "${NO_PROXY}" =~ .*".svc".* ]]; then
 242                 NO_PROXY="${NO_PROXY},.svc"
 243             fi
 244             if [[ ! "${NO_PROXY}" =~ .*".cluster.local".* ]]; then
 245                 NO_PROXY="${NO_PROXY},.cluster.local"
 246             fi
 247             OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=\"${NO_PROXY//,/\,}\""
 248         fi
 249     fi
 250
 251     if [ -n "${INSTALL_JUJU}" ]; then
 252         OSM_HELM_OPTS="-f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
 253     fi
 254     echo "helm upgrade --install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}"
 255     helm upgrade --install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}
 256     # Override existing values.yaml with the final values.yaml used to install OSM
 257     helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
 258     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 259 }
 260
 261 #deploy charmed services
 262 function deploy_charmed_services() {
 263     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 264     juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
 265     juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable
 266     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 267 }
 268
 269 #deploy mongodb
 270 function deploy_mongodb() {
 271     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 272     MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 273     [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
 274     $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
 275     FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed"
 276     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 277 }
 278
 279 function install_osm_ngsa_service() {
 280     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 281     NGSA_OPTS="-i ${OSM_DEFAULT_IP} -d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 282     [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
 283     $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
 284     FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
 285     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 286 }
 287
 288 function add_local_k8scluster() {
 289     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 290     # OSM_HOSTNAME=$(kubectl get --namespace osm -o jsonpath="{.spec.rules[0].host}" ingress nbi-ingress)
 291     OSM_HOSTNAME="nbi.${OSM_DEFAULT_IP}.nip.io:443"
 292     /usr/bin/osm --hostname ${OSM_HOSTNAME} --all-projects vim-create \
 293       --name _system-osm-vim \
 294       --account_type dummy \
 295       --auth_url http://dummy \
 296       --user osm --password osm --tenant osm \
 297       --description "dummy" \
 298       --config '{management_network_name: mgmt}'
 299     /usr/bin/osm --hostname ${OSM_HOSTNAME} --all-projects k8scluster-add \
 300       --creds ${HOME}/.kube/config \
 301       --vim _system-osm-vim \
 302       --k8s-nets '{"net1": null}' \
 303       --version '1.29' \
 304       --description "OSM Internal Cluster" \
 305       _system-osm-k8s
 306     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 307 }
 308
 309 function configure_apt_proxy() {
 310     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 311     OSM_APT_PROXY=$1
 312     OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt"
 313     echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}"
 314     if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
 315         sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
 316 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
 317 EOF"
 318     else
 319         sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE}
 320     fi
 321     sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}"
 322     track prereq apt_proxy_configured_ok
 323     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 324 }
 325
 326 function ask_proceed() {
 327     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 328
 329     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
 330     1. Install and configure LXD
 331     2. Install juju
 332     3. Install docker CE
 333     4. Disable swap space
 334     5. Install and initialize Kubernetes
 335     as pre-requirements.
 336     Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 337
 338     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 339 }
 340
 341 function check_osm_behind_proxy() {
 342     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 343
 344     export OSM_BEHIND_PROXY=""
 345     export OSM_PROXY_ENV_VARIABLES=""
 346     [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
 347     [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
 348     [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
 349     [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
 350     [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
 351     [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
 352
 353     echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
 354     echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
 355
 356     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 357         [ -z "$ASSUME_YES" ] && ! ask_user "
 358 The following env variables have been found for the current user:
 359 ${OSM_PROXY_ENV_VARIABLES}.
 360
 361 This suggests that this machine is behind a proxy and a special configuration is required.
 362 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
 363 env variables.
 364
 365 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
 366 Depending on the program, the env variables to work behind a proxy might be different
 367 (e.g. http_proxy vs HTTP_PROXY).
 368
 369 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
 370 and HTTPS_PROXY are defined.
 371
 372 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
 373 those env variables are also set for root user. If you are not sure whether those variables
 374 are configured for the root user, you can stop the installation now.
 375
 376 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
 377     else
 378         echo "This machine is not behind a proxy"
 379     fi
 380
 381     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 382 }
 383
 384 function find_devops_folder() {
 385     if [ -z "$OSM_DEVOPS" ]; then
 386         if [ -n "$TEST_INSTALLER" ]; then
 387             echo -e "\nUsing local devops repo for OSM installation"
 388             OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
 389         else
 390             echo -e "\nCreating temporary dir for OSM installation"
 391             OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 392             trap 'rm -rf "$OSM_DEVOPS"' EXIT
 393             git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
 394         fi
 395     fi
 396 }
 397
 398 function install_osm() {
 399     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 400
 401     trap ctrl_c INT
 402
 403     check_osm_behind_proxy
 404     check_packages "git wget curl tar snapd"
 405     if [ -n "${INSTALL_JUJU}" ]; then
 406         sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 407     fi
 408     find_devops_folder
 409
 410     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
 411
 412     track checks checkingroot_ok
 413     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 414     track checks noroot_ok
 415     ask_proceed
 416     track checks proceed_ok
 417
 418     echo "Installing OSM"
 419
 420     [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
 421
 422     echo "Determining IP address of the interface with the default route"
 423     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
 424     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
 425     [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 426     OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
 427     [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 428
 429     # configure apt proxy
 430     [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
 431
 432     # if lxd is requested, we will install it
 433     if [ -n "$INSTALL_LXD" ]; then
 434         LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
 435         [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
 436         $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
 437     fi
 438
 439     track prereq prereqok_ok
 440
 441     if [ -n "$INSTALL_DOCKER" ] || [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 442         if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 443             echo "Kubeadm requires docker, so docker will be installed."
 444         fi
 445         DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 446         [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
 447         [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
 448         $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
 449     fi
 450     track docker_ce docker_ce_ok
 451
 452     $OSM_DEVOPS/installers/install_helm_client.sh -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
 453     FATAL_TRACK k8scluster "install_helm_client.sh failed"
 454     track helm_client install_helm_client_ok
 455
 456     if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 457         KUBEADM_INSTALL_OPTS="-d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 458         $OSM_DEVOPS/installers/install_kubeadm_cluster.sh ${KUBEADM_INSTALL_OPTS} || \
 459         FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
 460         K8SCLUSTER_ADDONS_INSTALL_OPTS="-i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 461         $OSM_DEVOPS/installers/install_cluster_addons.sh ${K8SCLUSTER_ADDONS_INSTALL_OPTS} || \
 462         FATAL_TRACK k8scluster "install_cluster_addons.sh failed"
 463     fi
 464     track k8scluster k8scluster_ok
 465
 466     if [ -n "${INSTALL_JUJU}" ]; then
 467         JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_CACHELXDIMAGES}"
 468         [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
 469         [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
 470         [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
 471         [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
 472         [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
 473         $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
 474         set_vca_variables
 475     fi
 476     track juju juju_ok
 477
 478     # Deploy OSM services
 479     track docker_images docker_images_ok
 480
 481     deploy_mongodb
 482     track deploy_osm deploy_mongodb_ok
 483     deploy_osm_services
 484     track deploy_osm deploy_osm_services_k8s_ok
 485     if [ -n "$INSTALL_K8S_MONITOR" ]; then
 486         # install OSM MONITORING
 487         install_k8s_monitoring
 488         track deploy_osm install_k8s_monitoring_ok
 489     fi
 490     if [ -n "$INSTALL_NGSA" ]; then
 491         # optional NGSA install
 492         install_osm_ngsa_service
 493         track deploy_osm install_osm_ngsa_ok
 494     fi
 495
 496     [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
 497     track osmclient osmclient_ok
 498
 499     echo -e "Checking OSM health state..."
 500     $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
 501     (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
 502     echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
 503     track healthchecks osm_unhealthy didnotconverge)
 504     track healthchecks after_healthcheck_ok
 505
 506     add_local_k8scluster
 507     track final_ops add_local_k8scluster_ok
 508
 509     # if lxd is requested, iptables firewall is updated to work with both docker and LXD
 510     if [ -n "$INSTALL_LXD" ]; then
 511         arrange_docker_default_network_policy
 512     fi
 513
 514     wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
 515     track end
 516     sudo find /etc/osm
 517     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 518     return 0
 519 }
 520
 521 function install_to_openstack() {
 522     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 523
 524     if [ -z "$2" ]; then
 525         FATAL "OpenStack installer requires a valid external network name"
 526     fi
 527
 528     # Install Pip for Python3
 529     sudo apt install -y python3-pip python3-venv
 530     sudo -H LC_ALL=C python3 -m pip install -U pip
 531
 532     # Create a venv to avoid conflicts with the host installation
 533     python3 -m venv $OPENSTACK_PYTHON_VENV
 534
 535     source $OPENSTACK_PYTHON_VENV/bin/activate
 536
 537     # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
 538     python -m pip install -U wheel
 539     python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
 540
 541     # Install the Openstack cloud module (ansible>=2.10)
 542     ansible-galaxy collection install openstack.cloud
 543
 544     export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
 545
 546     OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
 547
 548     ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
 549
 550     if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
 551         ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
 552     fi
 553
 554     if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
 555         ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
 556     fi
 557
 558     # Execute the Ansible playbook based on openrc or clouds.yaml
 559     if [ -e "$1" ]; then
 560         . $1
 561         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 562         $OSM_DEVOPS/installers/openstack/site.yml
 563     else
 564         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 565         -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
 566     fi
 567
 568     # Exit from venv
 569     deactivate
 570
 571     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 572     return 0
 573 }
 574
 575 function arrange_docker_default_network_policy() {
 576     echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
 577     sudo iptables -I DOCKER-USER -j ACCEPT
 578     sudo iptables-save | sudo tee /etc/iptables/rules.v4
 579     sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
 580 }
 581
 582 function install_k8s_monitoring() {
 583     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 584     # install OSM monitoring
 585     sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh -o ${OSM_NAMESPACE} || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
 586     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 587 }
 588
 589 function dump_vars(){
 590     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 591     echo "APT_PROXY_URL=$APT_PROXY_URL"
 592     echo "K8S_CLUSTER_ENGINE=$K8S_CLUSTER_ENGINE"
 593     echo "DEBUG_INSTALL=$DEBUG_INSTALL"
 594     echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
 595     echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
 596     echo "DOCKER_USER=$DOCKER_USER"
 597     echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
 598     echo "INSTALL_JUJU=$INSTALL_JUJU"
 599     echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
 600     echo "INSTALL_LXD=$INSTALL_LXD"
 601     echo "INSTALL_NGSA=$INSTALL_NGSA"
 602     echo "INSTALL_DOCKER=$INSTALL_DOCKER"
 603     echo "INSTALL_ONLY=$INSTALL_ONLY"
 604     echo "INSTALL_PLA=$INSTALL_PLA"
 605     echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
 606     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 607     echo "NO_HOST_PORTS=$NO_HOST_PORTS"
 608     echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
 609     echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
 610     echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
 611     echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
 612     echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
 613     echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
 614     echo "OSM_DEVOPS=$OSM_DEVOPS"
 615     echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
 616     echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
 617     echo "OSM_NAMESPACE=$OSM_NAMESPACE"
 618     echo "OSM_VCA_HOST=$OSM_VCA_HOST"
 619     echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
 620     echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
 621     echo "OSM_WORK_DIR=$OSM_WORK_DIR"
 622     echo "PULL_IMAGES=$PULL_IMAGES"
 623     echo "RECONFIGURE=$RECONFIGURE"
 624     echo "RELEASE=$RELEASE"
 625     echo "REPOSITORY=$REPOSITORY"
 626     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 627     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 628     echo "SHOWOPTS=$SHOWOPTS"
 629     echo "TEST_INSTALLER=$TEST_INSTALLER"
 630     echo "UNINSTALL=$UNINSTALL"
 631     echo "UPDATE=$UPDATE"
 632     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 633 }
 634
 635 function parse_docker_registry_url() {
 636     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 637     DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}')
 638     DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}')
 639     DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}')
 640     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 641 }
 642
 643 function ctrl_c() {
 644     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 645     echo "** Trapped CTRL-C"
 646     FATAL "User stopped the installation"
 647     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 648 }
 649
 650 UNINSTALL=""
 651 UPDATE=""
 652 RECONFIGURE=""
 653 TEST_INSTALLER=""
 654 INSTALL_LXD=""
 655 SHOWOPTS=""
 656 ASSUME_YES=""
 657 APT_PROXY_URL=""
 658 K8S_CLUSTER_ENGINE="kubeadm"
 659 DEBUG_INSTALL=""
 660 RELEASE="testing-daily"
 661 REPOSITORY="testing"
 662 INSTALL_K8S_MONITOR=""
 663 INSTALL_NGSA="y"
 664 INSTALL_PLA=""
 665 INSTALL_VIMEMU=""
 666 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 667 LXD_REPOSITORY_PATH=""
 668 INSTALL_TO_OPENSTACK=""
 669 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
 670 OPENSTACK_PUBLIC_NET_NAME=""
 671 OPENSTACK_ATTACH_VOLUME="false"
 672 OPENSTACK_SSH_KEY_FILE=""
 673 OPENSTACK_USERDATA_FILE=""
 674 OPENSTACK_VM_NAME="server-osm"
 675 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
 676 INSTALL_ONLY=""
 677 INSTALL_DOCKER=""
 678 INSTALL_JUJU=""
 679 INSTALL_NOHOSTCLIENT=""
 680 INSTALL_CACHELXDIMAGES=""
 681 OSM_DEVOPS=
 682 OSM_VCA_HOST=
 683 OSM_VCA_SECRET=
 684 OSM_VCA_PUBKEY=
 685 OSM_VCA_CLOUDNAME="localhost"
 686 OSM_VCA_K8S_CLOUDNAME="k8scloud"
 687 OSM_NAMESPACE=osm
 688 NO_HOST_PORTS=""
 689 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 690 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
 691 OSM_WORK_DIR="/etc/osm"
 692 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
 693 OSM_HOST_VOL="/var/lib/osm"
 694 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
 695 OSM_DOCKER_TAG="testing-daily"
 696 DOCKER_USER=opensourcemano
 697 PULL_IMAGES="y"
 698 KAFKA_TAG=2.11-1.0.2
 699 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
 700 PROMETHEUS_TAG=v2.28.1
 701 GRAFANA_TAG=8.1.1
 702 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
 703 PROMETHEUS_CADVISOR_TAG=latest
 704 KEYSTONEDB_TAG=10
 705 OSM_DATABASE_COMMONKEY=
 706 ELASTIC_VERSION=6.4.2
 707 ELASTIC_CURATOR_VERSION=5.5.4
 708 POD_NETWORK_CIDR=10.244.0.0/16
 709 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
 710 RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$'
 711 DOCKER_REGISTRY_URL=
 712 DOCKER_PROXY_URL=
 713 MODULE_DOCKER_TAG=
 714 OSM_INSTALLATION_TYPE="Default"
 715
 716 while getopts ":a:c:r:n:k:u:R:D:o:O:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
 717     case "${o}" in
 718         a)
 719             APT_PROXY_URL=${OPTARG}
 720             ;;
 721         c)
 722             K8S_CLUSTER_ENGINE=${OPTARG}
 723             [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ] && continue
 724             [ "${K8S_CLUSTER_ENGINE}" == "k3s" ] && continue
 725             [ "${K8S_CLUSTER_ENGINE}" == "microk8s" ] && continue
 726             echo -e "Invalid argument for -c : ' ${K8S_CLUSTER_ENGINE}'\n" >&2
 727             usage && exit 1
 728             ;;
 729         r)
 730             REPOSITORY="${OPTARG}"
 731             REPO_ARGS+=(-r "$REPOSITORY")
 732             ;;
 733         k)
 734             REPOSITORY_KEY="${OPTARG}"
 735             REPO_ARGS+=(-k "$REPOSITORY_KEY")
 736             ;;
 737         u)
 738             REPOSITORY_BASE="${OPTARG}"
 739             REPO_ARGS+=(-u "$REPOSITORY_BASE")
 740             ;;
 741         R)
 742             RELEASE="${OPTARG}"
 743             REPO_ARGS+=(-R "$RELEASE")
 744             ;;
 745         D)
 746             OSM_DEVOPS="${OPTARG}"
 747             ;;
 748         o)
 749             INSTALL_ONLY="y"
 750             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 751             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 752             ;;
 753         O)
 754             INSTALL_TO_OPENSTACK="y"
 755             if [ -n "${OPTARG}" ]; then
 756                 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
 757             else
 758                 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
 759                 usage && exit 1
 760             fi
 761             ;;
 762         f)
 763             OPENSTACK_SSH_KEY_FILE="${OPTARG}"
 764             ;;
 765         F)
 766             OPENSTACK_USERDATA_FILE="${OPTARG}"
 767             ;;
 768         N)
 769             OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
 770             ;;
 771         H)
 772             OSM_VCA_HOST="${OPTARG}"
 773             ;;
 774         S)
 775             OSM_VCA_SECRET="${OPTARG}"
 776             ;;
 777         s)
 778             OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
 779             ;;
 780         t)
 781             OSM_DOCKER_TAG="${OPTARG}"
 782             REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
 783             ;;
 784         U)
 785             DOCKER_USER="${OPTARG}"
 786             ;;
 787         P)
 788             OSM_VCA_PUBKEY=$(cat ${OPTARG})
 789             ;;
 790         A)
 791             OSM_VCA_APIPROXY="${OPTARG}"
 792             ;;
 793         l)
 794             LXD_CLOUD_FILE="${OPTARG}"
 795             ;;
 796         L)
 797             LXD_CRED_FILE="${OPTARG}"
 798             ;;
 799         K)
 800             CONTROLLER_NAME="${OPTARG}"
 801             ;;
 802         d)
 803             DOCKER_REGISTRY_URL="${OPTARG}"
 804             ;;
 805         p)
 806             DOCKER_PROXY_URL="${OPTARG}"
 807             ;;
 808         T)
 809             MODULE_DOCKER_TAG="${OPTARG}"
 810             ;;
 811         -)
 812             [ "${OPTARG}" == "help" ] && usage && exit 0
 813             [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
 814             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 815             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 816             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 817             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 818             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 819             [ "${OPTARG}" == "lxd" ] && INSTALL_LXD="y" && continue
 820             [ "${OPTARG}" == "nolxd" ] && INSTALL_LXD="" && continue
 821             [ "${OPTARG}" == "docker" ] && INSTALL_DOCKER="y" && continue
 822             [ "${OPTARG}" == "nodocker" ] && INSTALL_DOCKER="" && continue
 823             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 824             [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
 825             [ "${OPTARG}" == "juju" ] && INSTALL_JUJU="y" && continue
 826             [ "${OPTARG}" == "nojuju" ] && INSTALL_JUJU="" && continue
 827             [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
 828             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 829             [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
 830             [ "${OPTARG}" == "bundle" ] && continue
 831             [ "${OPTARG}" == "k8s" ] && continue
 832             [ "${OPTARG}" == "lxd-cred" ] && continue
 833             [ "${OPTARG}" == "microstack" ] && continue
 834             [ "${OPTARG}" == "overlay" ] && continue
 835             [ "${OPTARG}" == "only-vca" ] && continue
 836             [ "${OPTARG}" == "small-profile" ] && continue
 837             [ "${OPTARG}" == "vca" ] && continue
 838             [ "${OPTARG}" == "ha" ] && continue
 839             [ "${OPTARG}" == "tag" ] && continue
 840             [ "${OPTARG}" == "registry" ] && continue
 841             [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
 842             [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
 843             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 844             [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
 845             [ "${OPTARG}" == "nocachelxdimages" ] && continue
 846             [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
 847             echo -e "Invalid option: '--$OPTARG'\n" >&2
 848             usage && exit 1
 849             ;;
 850         :)
 851             echo "Option -$OPTARG requires an argument" >&2
 852             usage && exit 1
 853             ;;
 854         \?)
 855             echo -e "Invalid option: '-$OPTARG'\n" >&2
 856             usage && exit 1
 857             ;;
 858         h)
 859             usage && exit 0
 860             ;;
 861         y)
 862             ASSUME_YES="y"
 863             ;;
 864         *)
 865             usage && exit 1
 866             ;;
 867     esac
 868 done
 869
 870 source $OSM_DEVOPS/common/all_funcs
 871
 872 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
 873 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
 874
 875 # Uninstall if "--uninstall"
 876 if [ -n "$UNINSTALL" ]; then
 877     if [ -n "$CHARMED" ]; then
 878         ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
 879         FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
 880     else
 881         ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
 882         FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
 883     fi
 884     echo -e "\nDONE"
 885     exit 0
 886 fi
 887
 888 # Installation starts here
 889
 890 # Get README and create OSM_TRACK_INSTALLATION_ID
 891 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README.txt &> /dev/null
 892 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
 893
 894 # Get OS info to be tracked
 895 os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}')
 896 echo $os_distro
 897 os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}')
 898 echo $os_release
 899 os_info="${os_distro}_${os_release}"
 900 os_info="${os_info// /_}"
 901
 902 if [ -n "$CHARMED" ]; then
 903     # Charmed installation
 904     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 905     ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
 906     FATAL_TRACK charmed_install "charmed_install.sh failed"
 907     wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
 908     echo -e "\nDONE"
 909     exit 0
 910 elif [ -n "$INSTALL_TO_OPENSTACK" ]; then
 911     # Installation to Openstack
 912     install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
 913     echo -e "\nDONE"
 914     exit 0
 915 else
 916     # Community_installer
 917     # Special cases go first
 918     [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
 919     [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
 920     [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
 921     # This is where installation starts
 922     install_osm
 923     echo -e "\nDONE"
 924     exit 0
 925 fi