3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at
7 # http://www.apache.org/licenses/LICENSE-2.0
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
17 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
18 echo -e "usage: $0 [OPTIONS]"
21 echo -e " -h / --help: print this help"
22 echo -e " -y: do not prompt for confirmation, assumes yes"
23 echo -e " -r <repo>: use specified repository name for osm packages"
24 echo -e " -R <release>: use specified release for osm binaries (deb packages, lxd images, ...)"
25 echo -e " -u <repo base>: use specified repository url for osm packages"
26 echo -e " -k <repo key>: use specified repository public key url"
27 echo -e " -b <refspec>: install OSM from source code using a specific branch (master, v2.0, ...) or tag"
28 echo -e " -b master (main dev branch)"
29 echo -e " -b v2.0 (v2.0 branch)"
30 echo -e " -b tags/v1.1.0 (a specific tag)"
32 echo -e " -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
33 echo -e " -s <namespace> namespace when installed using k8s, default is osm"
34 echo -e " -H <VCA host> use specific juju host controller IP"
35 echo -e " -S <VCA secret> use VCA/juju secret key"
36 echo -e " -P <VCA pubkey> use VCA/juju public key file"
37 echo -e " -A <VCA apiproxy> use VCA/juju API proxy"
38 echo -e " --pla: install the PLA module for placement support"
39 echo -e " --old-sa: install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
40 echo -e " --ng-sa: install new Service Assurance framework (Airflow, AlertManager and Pushgateway) (enabled by default)"
41 echo -e " -m <MODULE>: install OSM but only rebuild or pull the specified docker images (NG-UI, NBI, LCM, RO, MON, POL, PLA, KAFKA, MONGO, PROMETHEUS, PROMETHEUS-CADVISOR, KEYSTONE-DB, NONE)"
42 echo -e " -o <ADDON>: ONLY (un)installs one of the addons (k8s_monitor, ng-sa)"
43 echo -e " -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
44 echo -e " -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
45 echo -e " -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
46 echo -e " -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
47 echo -e " -D <devops path> use local devops installation path"
48 echo -e " -w <work dir> Location to store runtime installation"
49 echo -e " -t <docker tag> specify osm docker tag (default is latest)"
50 echo -e " -l: LXD cloud yaml file"
51 echo -e " -L: LXD credentials yaml file"
52 echo -e " -K: Specifies the name of the controller to use - The controller must be already bootstrapped"
53 echo -e " -d <docker registry URL> use docker registry URL instead of dockerhub"
54 echo -e " -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
55 echo -e " -T <docker tag> specify docker tag for the modules specified with option -m"
56 echo -e " --debug: debug mode"
57 echo -e " --nocachelxdimages: do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
58 echo -e " --cachelxdimages: cache local lxd images, create cronjob for that cache (will make installation longer)"
59 echo -e " --nolxd: do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
60 echo -e " --nodocker: do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
61 echo -e " --nojuju: do not juju, assumes already installed"
62 echo -e " --nodockerbuild:do not build docker images (use existing locally cached images)"
63 echo -e " --nohostports: do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
64 echo -e " --nohostclient: do not install the osmclient"
65 echo -e " --uninstall: uninstall OSM: remove the containers and delete NAT rules"
66 echo -e " --source: install OSM from source code using the latest stable tag"
67 echo -e " --develop: (deprecated, use '-b master') install OSM from source code using the master branch"
68 echo -e " --pullimages: pull/run osm images from docker.io/opensourcemano"
69 echo -e " --k8s_monitor: install the OSM kubernetes monitoring with prometheus and grafana"
70 echo -e " --volume: create a VM volume when installing to OpenStack"
71 echo -e " --showopts: print chosen options and exit (only for debugging)"
72 echo -e " --charmed: Deploy and operate OSM with Charms on k8s"
73 echo -e " [--bundle <bundle path>]: Specify with which bundle to deploy OSM with charms (--charmed option)"
74 echo -e " [--k8s <kubeconfig path>]: Specify with which kubernetes to deploy OSM with charms (--charmed option)"
75 echo -e " [--vca <name>]: Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
76 echo -e " [--small-profile]: Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
77 echo -e " [--lxd <yaml path>]: Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
78 echo -e " [--lxd-cred <yaml path>]: Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
79 echo -e " [--microstack]: Installs microstack as a vim. (--charmed option)"
80 echo -e " [--overlay]: Add an overlay to override some defaults of the default bundle (--charmed option)"
81 echo -e " [--ha]: Installs High Availability bundle. (--charmed option)"
82 echo -e " [--tag]: Docker image tag. (--charmed option)"
83 echo -e " [--registry]: Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
84 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
87 # takes a juju/accounts.yaml file and returns the password specific
88 # for a controller. I wrote this using only bash tools to minimize
89 # additions of other packages
90 function parse_juju_password
{
91 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
92 password_file
="${HOME}/.local/share/juju/accounts.yaml"
93 local controller_name
=$1
94 local s
='[[:space:]]*' w
='[a-zA-Z0-9_-]*' fs
=$
(echo @|
tr @
'\034')
95 sed -ne "s|^\($s\):|\1|" \
96 -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
97 -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
98 awk -F$fs -v controller
=$controller_name '{
99 indent = length($1)/2;
101 for (i in vname) {if (i > indent) {delete vname[i]}}
102 if (length($3) > 0) {
103 vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
104 if (match(vn,controller) && match($2,"password")) {
109 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
112 function set_vca_variables
() {
113 OSM_VCA_CLOUDNAME
="lxd-cloud"
114 [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME
="localhost"
115 if [ -z "$OSM_VCA_HOST" ]; then
116 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST
=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
117 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST
=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
118 [ -z "$OSM_VCA_HOST" ] && FATAL
"Cannot obtain juju controller IP address"
120 if [ -z "$OSM_VCA_SECRET" ]; then
121 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET
=$
(parse_juju_password
$OSM_NAMESPACE)
122 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET
=$
(parse_juju_password
$CONTROLLER_NAME)
123 [ -z "$OSM_VCA_SECRET" ] && FATAL
"Cannot obtain juju secret"
125 if [ -z "$OSM_VCA_PUBKEY" ]; then
126 OSM_VCA_PUBKEY
=$
(cat $HOME/.local
/share
/juju
/ssh
/juju_id_rsa.pub
)
127 [ -z "$OSM_VCA_PUBKEY" ] && FATAL
"Cannot obtain juju public key"
129 if [ -z "$OSM_VCA_CACERT" ]; then
130 [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT
=$
(juju controllers
--format json | jq
-r --arg controller
$OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 |
tr -d \\n
)
131 [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT
=$
(juju controllers
--format json | jq
-r --arg controller
$CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 |
tr -d \\n
)
132 [ -z "$OSM_VCA_CACERT" ] && FATAL
"Cannot obtain juju CA certificate"
136 function generate_secret
() {
137 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
138 head /dev
/urandom |
tr -dc A-Za-z0-9 |
head -c 32
139 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
142 function check_packages
() {
144 echo -e "Checking required packages: ${NEEDED_PACKAGES}"
145 for PACKAGE
in ${NEEDED_PACKAGES} ; do
147 if [ $?
-ne 0 ]; then
148 echo -e "Package ${PACKAGE} is not installed."
149 echo -e "Updating apt-cache ..."
151 echo -e "Installing ${PACKAGE} ..."
152 sudo apt-get
install -y ${PACKAGE} || FATAL
"failed to install ${PACKAGE}"
155 echo -e "Required packages are present: ${NEEDED_PACKAGES}"
159 # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
160 # Params: $1 text to ask; $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
161 # Return: true(0) if user type 'yes'; false (1) if user type 'no'
162 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
163 read -e -p "$1" USER_CONFIRMATION
165 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
166 [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
167 [ "${USER_CONFIRMATION,,}" == "yes" ] ||
[ "${USER_CONFIRMATION,,}" == "y" ] && return 0
168 [ "${USER_CONFIRMATION,,}" == "no" ] ||
[ "${USER_CONFIRMATION,,}" == "n" ] && return 1
169 read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
171 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
174 function install_osmclient
(){
175 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
176 CLIENT_RELEASE
=${RELEASE#"-R "}
177 CLIENT_REPOSITORY_KEY
="OSM%20ETSI%20Release%20Key.gpg"
178 CLIENT_REPOSITORY
=${REPOSITORY#"-r "}
179 CLIENT_REPOSITORY_BASE
=${REPOSITORY_BASE#"-u "}
180 key_location
=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
181 curl
$key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE
=1 apt-key add
-
182 sudo add-apt-repository
-y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
183 sudo apt-get
-y update
184 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y python3-pip
185 sudo
-H LC_ALL
=C python3
-m pip
install -U pip
186 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y python3-osm-im python3-osmclient
187 if [ -f /usr
/lib
/python
3/dist-packages
/osm_im
/requirements.txt
]; then
188 python3
-m pip
install -r /usr
/lib
/python
3/dist-packages
/osm_im
/requirements.txt
190 if [ -f /usr
/lib
/python
3/dist-packages
/osmclient
/requirements.txt
]; then
191 sudo DEBIAN_FRONTEND
=noninteractive apt-get
install -y libmagic1
192 python3
-m pip
install -r /usr
/lib
/python
3/dist-packages
/osmclient
/requirements.txt
194 [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_HOSTNAME
=`lxc list | awk '($2=="SO-ub"){print $6}'`
195 [ -z "$INSTALL_LIGHTWEIGHT" ] && export OSM_RO_HOSTNAME
=`lxc list | awk '($2=="RO"){print $6}'`
196 echo -e "\nOSM client installed"
197 if [ -z "$INSTALL_LIGHTWEIGHT" ]; then
198 echo -e "You might be interested in adding the following OSM client env variables to your .bashrc file:"
199 echo " export OSM_HOSTNAME=${OSM_HOSTNAME}"
200 echo " export OSM_RO_HOSTNAME=${OSM_RO_HOSTNAME}"
202 echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
203 echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
204 echo " export OSM_HOSTNAME=<OSM_host>"
206 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
210 function docker_login
() {
211 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
213 [ -z "${DEBUG_INSTALL}" ] || DEBUG
"Docker registry user: ${DOCKER_REGISTRY_USER}"
214 sg docker
-c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
215 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
218 function generate_docker_images
() {
219 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
220 echo "Generating docker images"
221 _build_from
=$COMMIT_ID
222 [ -z "$_build_from" ] && _build_from
="latest"
223 echo "OSM Docker images generated from $_build_from"
224 LWTEMPDIR
="$(mktemp -d -q --tmpdir "installosmlight.XXXXXX
")"
225 trap 'rm -rf "${LWTEMPDIR}"' EXIT
226 for module
in MON POL NBI KEYSTONE RO LCM NG-UI PLA
; do
227 if [ -z "$TO_REBUILD" ] ||
echo $TO_REBUILD |
grep -q ${module} ; then
228 module_lower
=${module,,}
229 if [ $module == "PLA" -a ! -n "$INSTALL_PLA" ]; then
232 git
-C ${LWTEMPDIR} clone https
://osm.etsi.org
/gerrit
/osm
/$module
233 git
-C ${LWTEMPDIR}/${module} checkout ${COMMIT_ID}
234 sg docker
-c "docker build ${LWTEMPDIR}/${module} -f ${LWTEMPDIR}/${module}/docker/Dockerfile -t ${DOCKER_USER}/${module_lower} --no-cache" || FATAL "cannot build ${module} docker image"
237 if [ -z "$TO_REBUILD" ] ||
echo $TO_REBUILD |
grep -q osmclient
; then
238 BUILD_ARGS
+=(--build-arg REPOSITORY
="$REPOSITORY")
239 BUILD_ARGS
+=(--build-arg RELEASE
="$RELEASE")
240 BUILD_ARGS
+=(--build-arg REPOSITORY_KEY
="$REPOSITORY_KEY")
241 BUILD_ARGS
+=(--build-arg REPOSITORY_BASE
="$REPOSITORY_BASE")
242 sg docker
-c "docker build -t ${DOCKER_USER}/osmclient ${BUILD_ARGS[@]} -f $OSM_DEVOPS/docker/osmclient ."
244 echo "Finished generation of docker images"
245 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of
function
248 function cmp_overwrite
() {
249 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of
function
252 if ! $
(cmp "${file1}" "${file2}" >/dev
/null
2>&1); then
253 if [ -f "${file2}" ]; then
254 ask_user
"The file ${file2} already exists. Overwrite (y/N)? " n && cp -b ${file1} ${file2}
256 cp -b ${file1} ${file2}
259 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
262 #deploys osm pods and services
263 function deploy_osm_services() {
264 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
265 # helm is already installed as part of install_kubeadm_cluster.sh
267 # Generate helm values to be passed with -f osm-values.yaml
268 sudo mkdir -p ${OSM_HELM_WORK_DIR}
269 if [ -n "${INSTALL_JUJU}" ]; then
270 sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
272 pubkey: \"${OSM_VCA_PUBKEY}\"
276 # Generate helm values to be passed with --set
278 # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret
=false
"
279 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
280 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath
=${OSM_NAMESPACE_VOL}"
281 if [ -n "${INSTALL_JUJU}" ]; then
282 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.enabled
=true
"
283 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.
host=${OSM_VCA_HOST}"
284 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret
=${OSM_VCA_SECRET}"
285 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert
=${OSM_VCA_CACERT}"
287 [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY
=${OSM_VCA_APIPROXY}"
288 [ ! "$OSM_DOCKER_TAG" == "testing-daily
" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.tag
=${OSM_DOCKER_TAG}"
289 [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance
=true
"
290 if [ -n "${OSM_BEHIND_PROXY}" ]; then
291 OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy
=true
"
292 [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=${HTTP_PROXY}"
293 [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=${HTTPS_PROXY}"
294 [ -n "${NO_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=${NO_PROXY}"
297 if [ -n "${INSTALL_JUJU}" ]; then
298 OSM_HELM_OPTS="-f ${OSM_HELM_WORK_DIR}/osm-values.yaml
${OSM_HELM_OPTS}"
300 echo "helm
install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers
/helm
/osm
${OSM_HELM_OPTS}"
301 helm install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}
302 # Override existing values.yaml with the final values.yaml used to install OSM
303 helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
304 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
307 #deploy charmed services
308 function deploy_charmed_services() {
309 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
310 juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
311 juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable
312 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
316 function deploy_mongodb() {
317 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
318 MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
319 [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
320 $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
321 FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed
"
322 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
325 function install_osm_ngsa_service() {
326 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
327 NGSA_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
328 [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
329 $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
330 FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed
"
331 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
334 function add_local_k8scluster() {
335 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
336 /usr/bin/osm --all-projects vim-create \
337 --name _system-osm-vim \
338 --account_type dummy \
339 --auth_url http://dummy \
340 --user osm --password osm --tenant osm \
341 --description "dummy
" \
342 --config '{management_network_name: mgmt}'
343 /usr/bin/osm --all-projects k8scluster-add \
344 --creds ${HOME}/.kube/config \
345 --vim _system-osm-vim \
346 --k8s-nets '{"net1
": null}' \
348 --description "OSM Internal Cluster
" \
350 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
353 function configure_apt_proxy() {
354 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
356 OSM_APT_PROXY_FILE="/etc
/apt
/apt.conf.d
/osm-apt
"
357 echo "Configuring apt proxy
in file ${OSM_APT_PROXY_FILE}"
358 if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
359 sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
360 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
363 sudo sed -i "s|Proxy.
*|Proxy
\"${OSM_APT_PROXY}\"; }|
" ${OSM_APT_PROXY_FILE}
365 sudo apt-get update || FATAL "Configured apt proxy
, but couldn
't run 'apt-get update
'. Check ${OSM_APT_PROXY_FILE}"
366 track prereq apt_proxy_configured_ok
367 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
370 function ask_proceed() {
371 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
373 [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
374 1. Install and configure LXD
377 4. Disable swap space
378 5. Install and initialize Kubernetes
380 Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
382 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
385 function check_osm_behind_proxy() {
386 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
388 export OSM_BEHIND_PROXY=""
389 export OSM_PROXY_ENV_VARIABLES=""
390 [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
391 [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
392 [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
393 [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
394 [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
395 [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
397 echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
398 echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
400 if [ -n "${OSM_BEHIND_PROXY}" ]; then
401 [ -z "$ASSUME_YES" ] && ! ask_user "
402 The following env variables have been found for the current user:
403 ${OSM_PROXY_ENV_VARIABLES}.
405 This suggests that this machine is behind a proxy and a special configuration is required.
406 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
409 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
410 Depending on the program, the env variables to work behind a proxy might be different
411 (e.g. http_proxy vs HTTP_PROXY).
413 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
414 and HTTPS_PROXY are defined.
416 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
417 those env variables are also set for root user. If you are not sure whether those variables
418 are configured for the root user, you can stop the installation now.
420 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
422 echo "This machine is not behind a proxy"
425 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
428 function find_devops_folder() {
429 if [ -z "$OSM_DEVOPS" ]; then
430 if [ -n "$TEST_INSTALLER" ]; then
431 echo -e "\nUsing local devops repo for OSM installation"
432 OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
434 echo -e "\nCreating temporary dir for OSM installation"
435 OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
436 trap 'rm -rf "$OSM_DEVOPS"' EXIT
437 git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
442 function install_osm() {
443 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
448 check_osm_behind_proxy
449 check_packages "git wget curl tar snapd"
450 if [ -n "${INSTALL_JUJU}" ]; then
451 sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
455 track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
457 track checks checkingroot_ok
458 [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
459 track checks noroot_ok
461 track checks proceed_ok
463 echo "Installing OSM"
465 [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
467 echo "Determining IP address of the interface with the default route"
468 [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print
$5; exit}')
469 [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~
/^
0.0.0.0/ {print
$8; exit}')
470 [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
471 OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a
,"/"); print a
[1]; exit}'`
472 [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
474 # configure apt proxy
475 [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
477 # if lxd is requested, we will install it
478 if [ -n "$INSTALL_LXD" ]; then
479 LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
480 [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
481 $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
484 track prereq prereqok_ok
486 if [ ! -n "$INSTALL_NODOCKER" ]; then
487 DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
488 [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
489 [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
490 $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
493 track docker_ce docker_ce_ok
495 echo "Creating folders for installation"
496 [ ! -d "$OSM_WORK_DIR" ] && sudo mkdir -p $OSM_WORK_DIR
497 sudo cp -b $OSM_DEVOPS/installers/kubeadm-config.yaml $OSM_WORK_DIR/kubeadm-config.yaml
499 $OSM_DEVOPS/installers/install_kubeadm_cluster.sh -i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
500 FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
501 track k8scluster k8scluster_ok
503 if [ -n "${INSTALL_JUJU}" ]; then
504 JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_CACHELXDIMAGES}"
505 [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
506 [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
507 [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
508 [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
509 [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
510 $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
515 # Deploy OSM services
516 [ -z "$DOCKER_NOBUILD" ] && [ -z "$PULL_IMAGES" ] && generate_docker_images
517 track docker_images docker_images_ok
520 track deploy_osm deploy_mongodb_ok
522 track deploy_osm deploy_osm_services_k8s_ok
523 if [ -n "$INSTALL_K8S_MONITOR" ]; then
524 # install OSM MONITORING
525 install_k8s_monitoring
526 track deploy_osm install_k8s_monitoring_ok
528 if [ -n "$INSTALL_NGSA" ]; then
529 # optional NGSA install
530 install_osm_ngsa_service
531 track deploy_osm install_osm_ngsa_ok
534 [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
535 track osmclient osmclient_ok
537 echo -e "Checking OSM health state..."
538 $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
539 (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
540 echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
541 track healthchecks osm_unhealthy didnotconverge)
542 track healthchecks after_healthcheck_ok
545 track final_ops add_local_k8scluster_ok
547 arrange_docker_default_network_policy
549 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
552 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
556 function install_to_openstack() {
557 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
560 FATAL "OpenStack installer requires a valid external network name"
563 # Install Pip for Python3
564 sudo apt install -y python3-pip python3-venv
565 sudo -H LC_ALL=C python3 -m pip install -U pip
567 # Create a venv to avoid conflicts with the host installation
568 python3 -m venv $OPENSTACK_PYTHON_VENV
570 source $OPENSTACK_PYTHON_VENV/bin/activate
572 # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
573 python -m pip install -U wheel
574 python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
576 # Install the Openstack cloud module (ansible>=2.10)
577 ansible-galaxy collection install openstack.cloud
579 export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
581 OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
583 ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
585 if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
586 ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
589 if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
590 ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
593 # Execute the Ansible playbook based on openrc or clouds.yaml
596 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
597 $OSM_DEVOPS/installers/openstack/site.yml
599 ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
600 -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
606 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
610 function arrange_docker_default_network_policy() {
611 echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
612 sudo iptables -I DOCKER-USER -j ACCEPT
613 sudo iptables-save | sudo tee /etc/iptables/rules.v4
614 sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
617 function install_k8s_monitoring() {
618 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
619 # install OSM monitoring
620 sudo chmod +x $OSM_DEVOPS/installers/k8s/*.sh
621 sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
622 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
625 function dump_vars(){
626 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
627 echo "APT_PROXY_URL=$APT_PROXY_URL"
628 echo "DEVELOP=$DEVELOP"
629 echo "DEBUG_INSTALL=$DEBUG_INSTALL"
630 echo "DOCKER_NOBUILD=$DOCKER_NOBUILD"
631 echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
632 echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
633 echo "DOCKER_USER=$DOCKER_USER"
634 echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
635 echo "INSTALL_FROM_SOURCE=$INSTALL_FROM_SOURCE"
636 echo "INSTALL_JUJU=$INSTALL_JUJU"
637 echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
638 echo "INSTALL_LIGHTWEIGHT=$INSTALL_LIGHTWEIGHT"
639 echo "INSTALL_LXD=$INSTALL_LXD"
640 echo "INSTALL_NGSA=$INSTALL_NGSA"
641 echo "INSTALL_NODOCKER=$INSTALL_NODOCKER"
642 echo "INSTALL_ONLY=$INSTALL_ONLY"
643 echo "INSTALL_PLA=$INSTALL_PLA"
644 echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
645 echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
646 echo "NO_HOST_PORTS=$NO_HOST_PORTS"
647 echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
648 echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
649 echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
650 echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
651 echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
652 echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
653 echo "OSM_DEVOPS=$OSM_DEVOPS"
654 echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
655 echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
656 echo "OSM_NAMESPACE=$OSM_NAMESPACE"
657 echo "OSM_VCA_HOST=$OSM_VCA_HOST"
658 echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
659 echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
660 echo "OSM_WORK_DIR=$OSM_WORK_DIR"
661 echo "PULL_IMAGES=$PULL_IMAGES"
662 echo "RECONFIGURE=$RECONFIGURE"
663 echo "RELEASE=$RELEASE"
664 echo "REPOSITORY=$REPOSITORY"
665 echo "REPOSITORY_BASE=$REPOSITORY_BASE"
666 echo "REPOSITORY_KEY=$REPOSITORY_KEY"
667 echo "SHOWOPTS=$SHOWOPTS"
668 echo "TEST_INSTALLER=$TEST_INSTALLER"
669 echo "TO_REBUILD=$TO_REBUILD"
670 echo "UNINSTALL=$UNINSTALL"
671 echo "UPDATE=$UPDATE"
672 echo "Install from specific refspec (-b): $COMMIT_ID"
673 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
676 function parse_docker_registry_url() {
677 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
678 DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); split(a
[1],b
,":"); print b
[1]}')
679 DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); split(a
[1],b
,":"); print b
[2]}')
680 DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a
,"@"); print a
[2]}')
681 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
685 [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
686 echo "** Trapped CTRL-C"
687 FATAL "User stopped the installation"
688 [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
701 INSTALL_FROM_SOURCE=""
705 INSTALL_K8S_MONITOR=""
709 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
710 LXD_REPOSITORY_PATH=""
711 INSTALL_LIGHTWEIGHT="y"
712 INSTALL_TO_OPENSTACK=""
713 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
714 OPENSTACK_PUBLIC_NET_NAME=""
715 OPENSTACK_ATTACH_VOLUME="false"
716 OPENSTACK_SSH_KEY_FILE=""
717 OPENSTACK_USERDATA_FILE=""
718 OPENSTACK_VM_NAME="server-osm"
719 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
724 INSTALL_NOHOSTCLIENT=""
725 INSTALL_CACHELXDIMAGES=""
730 OSM_VCA_CLOUDNAME="localhost"
731 OSM_VCA_K8S_CLOUDNAME="k8scloud"
735 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
736 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
737 OSM_WORK_DIR="/etc/osm"
738 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
739 OSM_HOST_VOL="/var/lib/osm"
740 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
741 OSM_DOCKER_TAG="testing-daily"
742 DOCKER_USER=opensourcemano
745 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
746 PROMETHEUS_TAG=v2.28.1
748 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
749 PROMETHEUS_CADVISOR_TAG=latest
751 OSM_DATABASE_COMMONKEY=
752 ELASTIC_VERSION=6.4.2
753 ELASTIC_CURATOR_VERSION=5.5.4
754 POD_NETWORK_CIDR=10.244.0.0/16
755 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
756 RE_CHECK='^
[a-z0-9
]([-a-z0-9]*[a-z0-9
])?$
'
760 OSM_INSTALLATION_TYPE="Default"
762 while getopts ":a:b:r:n:k:u:R:D:o:O:m:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
765 APT_PROXY_URL=${OPTARG}
772 REPOSITORY="${OPTARG}"
773 REPO_ARGS+=(-r "$REPOSITORY")
776 REPOSITORY_KEY="${OPTARG}"
777 REPO_ARGS+=(-k "$REPOSITORY_KEY")
780 REPOSITORY_BASE="${OPTARG}"
781 REPO_ARGS+=(-u "$REPOSITORY_BASE")
785 REPO_ARGS+=(-R "$RELEASE")
788 OSM_DEVOPS="${OPTARG}"
792 [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
793 [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
796 INSTALL_TO_OPENSTACK="y"
797 if [ -n "${OPTARG}" ]; then
798 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
800 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
805 OPENSTACK_SSH_KEY_FILE="${OPTARG}"
808 OPENSTACK_USERDATA_FILE="${OPTARG}"
811 OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
814 [ "${OPTARG}" == "NG-UI" ] && TO_REBUILD="$TO_REBUILD NG-UI" && continue
815 [ "${OPTARG}" == "NBI" ] && TO_REBUILD="$TO_REBUILD NBI" && continue
816 [ "${OPTARG}" == "LCM" ] && TO_REBUILD="$TO_REBUILD LCM" && continue
817 [ "${OPTARG}" == "RO" ] && TO_REBUILD="$TO_REBUILD RO" && continue
818 [ "${OPTARG}" == "MON" ] && TO_REBUILD="$TO_REBUILD MON" && continue
819 [ "${OPTARG}" == "POL" ] && TO_REBUILD="$TO_REBUILD POL" && continue
820 [ "${OPTARG}" == "PLA" ] && TO_REBUILD="$TO_REBUILD PLA" && continue
821 [ "${OPTARG}" == "osmclient" ] && TO_REBUILD="$TO_REBUILD osmclient" && continue
822 [ "${OPTARG}" == "KAFKA" ] && TO_REBUILD="$TO_REBUILD KAFKA" && continue
823 [ "${OPTARG}" == "MONGO" ] && TO_REBUILD="$TO_REBUILD MONGO" && continue
824 [ "${OPTARG}" == "PROMETHEUS" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS" && continue
825 [ "${OPTARG}" == "PROMETHEUS-CADVISOR" ] && TO_REBUILD="$TO_REBUILD PROMETHEUS-CADVISOR" && continue
826 [ "${OPTARG}" == "KEYSTONE-DB" ] && TO_REBUILD="$TO_REBUILD KEYSTONE-DB" && continue
827 [ "${OPTARG}" == "GRAFANA" ] && TO_REBUILD="$TO_REBUILD GRAFANA" && continue
828 [ "${OPTARG}" == "NONE" ] && TO_REBUILD="$TO_REBUILD NONE" && continue
831 OSM_VCA_HOST="${OPTARG}"
834 OSM_VCA_SECRET="${OPTARG}"
837 OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
840 OSM_DOCKER_TAG="${OPTARG}"
841 REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
844 DOCKER_USER="${OPTARG}"
847 OSM_VCA_PUBKEY=$(cat ${OPTARG})
850 OSM_VCA_APIPROXY="${OPTARG}"
853 LXD_CLOUD_FILE="${OPTARG}"
856 LXD_CRED_FILE="${OPTARG}"
859 CONTROLLER_NAME="${OPTARG}"
862 DOCKER_REGISTRY_URL="${OPTARG}"
865 DOCKER_PROXY_URL="${OPTARG}"
868 MODULE_DOCKER_TAG="${OPTARG}"
871 [ "${OPTARG}" == "help" ] && usage && exit 0
872 [ "${OPTARG}" == "source" ] && INSTALL_FROM_SOURCE="y" && PULL_IMAGES="" && continue
873 [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
874 [ "${OPTARG}" == "develop" ] && DEVELOP="y" && continue
875 [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
876 [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
877 [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
878 [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
879 [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
880 [ "${OPTARG}" == "lxd" ] && INSTALL_LXD="y" && continue
881 [ "${OPTARG}" == "nolxd" ] && INSTALL_LXD="" && continue
882 [ "${OPTARG}" == "nodocker" ] && INSTALL_NODOCKER="y" && continue
883 [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
884 [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
885 [ "${OPTARG}" == "juju" ] && INSTALL_JUJU="y" && continue
886 [ "${OPTARG}" == "nojuju" ] && INSTALL_JUJU="" && continue
887 [ "${OPTARG}" == "nodockerbuild" ] && DOCKER_NOBUILD="y" && continue
888 [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
889 [ "${OPTARG}" == "pullimages" ] && continue
890 [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
891 [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
892 [ "${OPTARG}" == "bundle" ] && continue
893 [ "${OPTARG}" == "k8s" ] && continue
894 [ "${OPTARG}" == "lxd-cred" ] && continue
895 [ "${OPTARG}" == "microstack" ] && continue
896 [ "${OPTARG}" == "overlay" ] && continue
897 [ "${OPTARG}" == "only-vca" ] && continue
898 [ "${OPTARG}" == "small-profile" ] && continue
899 [ "${OPTARG}" == "vca" ] && continue
900 [ "${OPTARG}" == "ha" ] && continue
901 [ "${OPTARG}" == "tag" ] && continue
902 [ "${OPTARG}" == "registry" ] && continue
903 [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
904 [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
905 [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
906 [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
907 [ "${OPTARG}" == "nocachelxdimages" ] && continue
908 [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
909 echo -e "Invalid option: '--$OPTARG'\n" >&2
913 echo "Option -$OPTARG requires an argument" >&2
917 echo -e "Invalid option: '-$OPTARG'\n" >&2
932 source $OSM_DEVOPS/common/all_funcs
934 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
935 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
937 # Uninstall if "--uninstall"
938 if [ -n "$UNINSTALL" ]; then
939 if [ -n "$CHARMED" ]; then
940 ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
941 FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
943 ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
944 FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
950 # Installation starts here
952 # Get README and create OSM_TRACK_INSTALLATION_ID
953 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README.txt &> /dev/null
954 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
956 # Get OS info to be tracked
957 os_distro=$(lsb_release -i 2>/dev/null | awk '{print
$3}')
959 os_release=$(lsb_release -r 2>/dev/null | awk '{print
$2}')
961 os_info="${os_distro}_${os_release}"
962 os_info="${os_info// /_}"
964 # Charmed installation
965 if [ -n "$CHARMED" ]; then
966 sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
967 ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
968 FATAL_TRACK charmed_install "charmed_install.sh failed"
969 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
974 # Installation to Openstack
975 if [ -n "$INSTALL_TO_OPENSTACK" ]; then
976 install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
981 # Community_installer
982 # Check incompatible options
983 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" != " NONE" ] && echo $TO_REBUILD | grep -q NONE && FATAL "Incompatible option: -m NONE cannot be used with other -m options"
984 [ -n "$TO_REBUILD" ] && [ "$TO_REBUILD" == " PLA" ] && [ -z "$INSTALL_PLA" ] && FATAL "Incompatible option: -m PLA cannot be used without --pla option"
985 # Special cases go first
986 # if develop, we force master
987 [ -z "$COMMIT_ID" ] && [ -n "$DEVELOP" ] && COMMIT_ID="master"
988 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
989 [ -n "$INSTALL_ONLY" ] && [ -n "$INSTALL_NGSA" ] && install_osm_ngsa_service
990 [ -n "$INSTALL_ONLY" ] && echo -e "\nDONE" && exit 0
991 # This is where installation starts