installers/full_install_osm.sh

   1 #!/bin/bash
   2 #
   3 #   Licensed under the Apache License, Version 2.0 (the "License");
   4 #   you may not use this file except in compliance with the License.
   5 #   You may obtain a copy of the License at
   6 #
   7 #       http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #   Unless required by applicable law or agreed to in writing, software
  10 #   distributed under the License is distributed on an "AS IS" BASIS,
  11 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #   See the License for the specific language governing permissions and
  13 #   limitations under the License.
  14 #
  15
  16 function usage(){
  17     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  18     echo -e "usage: $0 [OPTIONS]"
  19     echo -e "Install OSM"
  20     echo -e "  OPTIONS"
  21     echo -e "     -h / --help:    print this help"
  22     echo -e "     -y:             do not prompt for confirmation, assumes yes"
  23     echo -e "     -r <repo>:      use specified repository name for osm packages"
  24     echo -e "     -R <release>:   use specified release for osm binaries (deb packages, lxd images, ...)"
  25     echo -e "     -u <repo base>: use specified repository url for osm packages"
  26     echo -e "     -k <repo key>:  use specified repository public key url"
  27     echo -e "     -a <apt proxy url>: use this apt proxy url when downloading apt packages (air-gapped installation)"
  28     echo -e "     -c <kubernetes engine>: use a specific kubernetes engine (options: kubeadm, k3s, microk8s), default is kubeadm"
  29     echo -e "     -s <namespace>  namespace when installed using k8s, default is osm"
  30     echo -e "     -H <VCA host>   use specific juju host controller IP"
  31     echo -e "     -S <VCA secret> use VCA/juju secret key"
  32     echo -e "     -P <VCA pubkey> use VCA/juju public key file"
  33     echo -e "     -A <VCA apiproxy> use VCA/juju API proxy"
  34     echo -e "     --pla:          install the PLA module for placement support"
  35     echo -e "     --old-sa:       install old Service Assurance framework (MON, POL); do not install Airflow and Pushgateway"
  36     echo -e "     --ng-sa:        install new Service Assurance framework (Airflow, AlertManager and Pushgateway) (enabled by default)"
  37     echo -e "     -o <COMPONENT>: ONLY installs the specified component (k8s_monitor, ng-sa, k8scluster, docker, deploy-osm)"
  38     echo -e "     -O <openrc file path/cloud name>: Install OSM to an OpenStack infrastructure. <openrc file/cloud name> is required. If a <cloud name> is used, the clouds.yaml file should be under ~/.config/openstack/ or /etc/openstack/"
  39     echo -e "     -N <openstack public network name/ID>: Public network name required to setup OSM to OpenStack"
  40     echo -e "     -f <path to SSH public key>: Public SSH key to use to deploy OSM to OpenStack"
  41     echo -e "     -F <path to cloud-init file>: Cloud-Init userdata file to deploy OSM to OpenStack"
  42     echo -e "     -D <devops path> use local devops installation path"
  43     echo -e "     -w <work dir>   Location to store runtime installation"
  44     echo -e "     -t <docker tag> specify osm docker tag (default is latest)"
  45     echo -e "     -l:             LXD cloud yaml file"
  46     echo -e "     -L:             LXD credentials yaml file"
  47     echo -e "     -K:             Specifies the name of the controller to use - The controller must be already bootstrapped"
  48     echo -e "     -d <docker registry URL> use docker registry URL instead of dockerhub"
  49     echo -e "     -p <docker proxy URL> set docker proxy URL as part of docker CE configuration"
  50     echo -e "     -T <docker tag> specify docker tag for the modules specified with option -m"
  51     echo -e "     --debug:        debug mode"
  52     echo -e "     --nocachelxdimages:  do not cache local lxd images, do not create cronjob for that cache (will save installation time, might affect instantiation time)"
  53     echo -e "     --cachelxdimages:  cache local lxd images, create cronjob for that cache (will make installation longer)"
  54     echo -e "     --nolxd:        do not install and configure LXD, allowing unattended installations (assumes LXD is already installed and confifured)"
  55     echo -e "     --nodocker:     do not install docker, do not initialize a swarm (assumes docker is already installed and a swarm has been initialized)"
  56     echo -e "     --nojuju:       do not juju, assumes already installed"
  57     echo -e "     --nohostports:  do not expose docker ports to host (useful for creating multiple instances of osm on the same host)"
  58     echo -e "     --nohostclient: do not install the osmclient"
  59     echo -e "     --uninstall:    uninstall OSM: remove the containers and delete NAT rules"
  60     echo -e "     --k8s_monitor:  install the OSM kubernetes monitoring with prometheus and grafana"
  61     echo -e "     --volume:       create a VM volume when installing to OpenStack"
  62     echo -e "     --showopts:     print chosen options and exit (only for debugging)"
  63     echo -e "     --charmed:                   Deploy and operate OSM with Charms on k8s"
  64     echo -e "     [--bundle <bundle path>]:    Specify with which bundle to deploy OSM with charms (--charmed option)"
  65     echo -e "     [--k8s <kubeconfig path>]:   Specify with which kubernetes to deploy OSM with charms (--charmed option)"
  66     echo -e "     [--vca <name>]:              Specifies the name of the controller to use - The controller must be already bootstrapped (--charmed option)"
  67     echo -e "     [--small-profile]:           Do not install and configure LXD which aims to use only K8s Clouds (--charmed option)"
  68     echo -e "     [--lxd <yaml path>]:         Takes a YAML file as a parameter with the LXD Cloud information (--charmed option)"
  69     echo -e "     [--lxd-cred <yaml path>]:    Takes a YAML file as a parameter with the LXD Credentials information (--charmed option)"
  70     echo -e "     [--microstack]:              Installs microstack as a vim. (--charmed option)"
  71     echo -e "     [--overlay]:                 Add an overlay to override some defaults of the default bundle (--charmed option)"
  72     echo -e "     [--ha]:                      Installs High Availability bundle. (--charmed option)"
  73     echo -e "     [--tag]:                     Docker image tag. (--charmed option)"
  74     echo -e "     [--registry]:                Docker registry with optional credentials as user:pass@hostname:port (--charmed option)"
  75     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
  76 }
  77
  78 # takes a juju/accounts.yaml file and returns the password specific
  79 # for a controller. I wrote this using only bash tools to minimize
  80 # additions of other packages
  81 function parse_juju_password {
  82     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
  83     password_file="${HOME}/.local/share/juju/accounts.yaml"
  84     local controller_name=$1
  85     local s='[[:space:]]*' w='[a-zA-Z0-9_-]*' fs=$(echo @|tr @ '\034')
  86     sed -ne "s|^\($s\):|\1|" \
  87          -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
  88          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $password_file |
  89     awk -F$fs -v controller=$controller_name '{
  90         indent = length($1)/2;
  91         vname[indent] = $2;
  92         for (i in vname) {if (i > indent) {delete vname[i]}}
  93         if (length($3) > 0) {
  94             vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
  95             if (match(vn,controller) && match($2,"password")) {
  96                 printf("%s",$3);
  97             }
  98         }
  99     }'
 100     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 101 }
 102
 103 function set_vca_variables() {
 104     OSM_VCA_CLOUDNAME="lxd-cloud"
 105     [ -n "$OSM_VCA_HOST" ] && OSM_VCA_CLOUDNAME="localhost"
 106     if [ -z "$OSM_VCA_HOST" ]; then
 107         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`sg lxd -c "juju show-controller $OSM_NAMESPACE"|grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 108         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_HOST=`juju show-controller $CONTROLLER_NAME |grep api-endpoints|awk -F\' '{print $2}'|awk -F\: '{print $1}'`
 109         [ -z "$OSM_VCA_HOST" ] && FATAL "Cannot obtain juju controller IP address"
 110     fi
 111     if [ -z "$OSM_VCA_SECRET" ]; then
 112         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $OSM_NAMESPACE)
 113         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_SECRET=$(parse_juju_password $CONTROLLER_NAME)
 114         [ -z "$OSM_VCA_SECRET" ] && FATAL "Cannot obtain juju secret"
 115     fi
 116     if [ -z "$OSM_VCA_PUBKEY" ]; then
 117         OSM_VCA_PUBKEY=$(cat $HOME/.local/share/juju/ssh/juju_id_rsa.pub)
 118         [ -z "$OSM_VCA_PUBKEY" ] && FATAL "Cannot obtain juju public key"
 119     fi
 120     if [ -z "$OSM_VCA_CACERT" ]; then
 121         [ -z "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $OSM_NAMESPACE '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 122         [ -n "$CONTROLLER_NAME" ] && OSM_VCA_CACERT=$(juju controllers --format json | jq -r --arg controller $CONTROLLER_NAME '.controllers[$controller]["ca-cert"]' | base64 | tr -d \\n)
 123         [ -z "$OSM_VCA_CACERT" ] && FATAL "Cannot obtain juju CA certificate"
 124     fi
 125 }
 126
 127 function generate_secret() {
 128     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 129     head /dev/urandom | tr -dc A-Za-z0-9 | head -c 32
 130     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 131 }
 132
 133 function check_packages() {
 134     NEEDED_PACKAGES="$1"
 135     echo -e "Checking required packages: ${NEEDED_PACKAGES}"
 136     for PACKAGE in ${NEEDED_PACKAGES} ; do
 137         dpkg -L ${PACKAGE}
 138         if [ $? -ne 0 ]; then
 139             echo -e "Package ${PACKAGE} is not installed."
 140             echo -e "Updating apt-cache ..."
 141             sudo apt-get update
 142             echo -e "Installing ${PACKAGE} ..."
 143             sudo apt-get install -y ${PACKAGE} || FATAL "failed to install ${PACKAGE}"
 144         fi
 145     done
 146     echo -e "Required packages are present: ${NEEDED_PACKAGES}"
 147 }
 148
 149 function ask_user(){
 150     # ask to the user and parse a response among 'y', 'yes', 'n' or 'no'. Case insensitive
 151     # Params: $1 text to ask;   $2 Action by default, can be 'y' for yes, 'n' for no, other or empty for not allowed
 152     # Return: true(0) if user type 'yes'; false (1) if user type 'no'
 153     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 154     read -e -p "$1" USER_CONFIRMATION
 155     while true ; do
 156         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'y' ] && return 0
 157         [ -z "$USER_CONFIRMATION" ] && [ "$2" == 'n' ] && return 1
 158         [ "${USER_CONFIRMATION,,}" == "yes" ] || [ "${USER_CONFIRMATION,,}" == "y" ] && return 0
 159         [ "${USER_CONFIRMATION,,}" == "no" ]  || [ "${USER_CONFIRMATION,,}" == "n" ] && return 1
 160         read -e -p "Please type 'yes' or 'no': " USER_CONFIRMATION
 161     done
 162     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 163 }
 164
 165 function install_osmclient(){
 166     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 167     CLIENT_RELEASE=${RELEASE#"-R "}
 168     CLIENT_REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 169     CLIENT_REPOSITORY=${REPOSITORY#"-r "}
 170     CLIENT_REPOSITORY_BASE=${REPOSITORY_BASE#"-u "}
 171     key_location=$CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE/$CLIENT_REPOSITORY_KEY
 172     curl $key_location | sudo APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1 apt-key add -
 173     sudo add-apt-repository -y "deb [arch=amd64] $CLIENT_REPOSITORY_BASE/$CLIENT_RELEASE $CLIENT_REPOSITORY osmclient IM"
 174     sudo apt-get -y update
 175     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-pip
 176     sudo -H LC_ALL=C python3 -m pip install -U pip
 177     sudo DEBIAN_FRONTEND=noninteractive apt-get install -y python3-osm-im python3-osmclient
 178     if [ -f /usr/lib/python3/dist-packages/osm_im/requirements.txt ]; then
 179         python3 -m pip install -r /usr/lib/python3/dist-packages/osm_im/requirements.txt
 180     fi
 181     if [ -f /usr/lib/python3/dist-packages/osmclient/requirements.txt ]; then
 182         sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libmagic1
 183         python3 -m pip install -r /usr/lib/python3/dist-packages/osmclient/requirements.txt
 184     fi
 185     echo -e "\nOSM client installed"
 186     echo -e "OSM client assumes that OSM host is running in localhost (127.0.0.1)."
 187     echo -e "In case you want to interact with a different OSM host, you will have to configure this env variable in your .bashrc file:"
 188     echo "     export OSM_HOSTNAME=nbi.${OSM_DEFAULT_IP}.nip.io"
 189     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 190     return 0
 191 }
 192
 193 function docker_login() {
 194     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 195     echo "Docker login"
 196     [ -z "${DEBUG_INSTALL}" ] || DEBUG "Docker registry user: ${DOCKER_REGISTRY_USER}"
 197     sg docker -c "docker login -u ${DOCKER_REGISTRY_USER} -p ${DOCKER_REGISTRY_PASSWORD} --password-stdin"
 198     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 199 }
 200
 201 #deploys osm pods and services
 202 function deploy_osm_helm_chart() {
 203     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 204     # Generate helm values to be passed with -f osm-values.yaml
 205     sudo mkdir -p ${OSM_HELM_WORK_DIR}
 206     if [ -n "${INSTALL_JUJU}" ]; then
 207         sudo bash -c "cat << EOF > ${OSM_HELM_WORK_DIR}/osm-values.yaml
 208 vca:
 209   pubkey: \"${OSM_VCA_PUBKEY}\"
 210 EOF"
 211     fi
 212
 213     # Generate helm values to be passed with --set
 214     OSM_HELM_OPTS=""
 215     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set nbi.useOsmSecret=false"
 216     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set mysql.dbHostPath=${OSM_NAMESPACE_VOL}" # not needed as mysql is now bitnami helm chart
 217
 218     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.image.repositoryBase=${DOCKER_REGISTRY_URL}${DOCKER_USER}"
 219     [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set-string global.image.tag=${OSM_DOCKER_TAG}"
 220     [ ! "$OSM_DOCKER_TAG" == "testing-daily" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set prometheus.server.sidecarContainers.prometheus-config-sidecar.image=${DOCKER_REGISTRY_URL}${DOCKER_USER}/prometheus:${OSM_DOCKER_TAG}"
 221
 222     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.hostname=${OSM_DEFAULT_IP}.nip.io"
 223     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set grafana.ingress.hosts={grafana.${OSM_DEFAULT_IP}.nip.io}"
 224     OSM_HELM_OPTS="${OSM_HELM_OPTS} --set prometheus.server.ingress.hosts={prometheus.${OSM_DEFAULT_IP}.nip.io}"
 225     # OSM_HELM_OPTS="${OSM_HELM_OPTS} --set prometheus.alertmanager.ingress.hosts={alertmanager.${OSM_DEFAULT_IP}.nip.io}"
 226
 227     if [ -n "${INSTALL_JUJU}" ]; then
 228         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.enabled=true"
 229         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.host=${OSM_VCA_HOST}"
 230         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.secret=${OSM_VCA_SECRET}"
 231         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set vca.cacert=${OSM_VCA_CACERT}"
 232     fi
 233     [ -n "$OSM_VCA_APIPROXY" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set lcm.config.OSMLCM_VCA_APIPROXY=${OSM_VCA_APIPROXY}"
 234
 235     [ -n "${INSTALL_NGSA}" ] || OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.oldServiceAssurance=true"
 236     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 237         OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.behindHttpProxy=true"
 238         [ -n "${HTTP_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTP_PROXY=\"${HTTP_PROXY}\""
 239         [ -n "${HTTPS_PROXY}" ] && OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.HTTPS_PROXY=\"${HTTPS_PROXY}\""
 240         if [ -n "${NO_PROXY}" ]; then
 241             if [[ ! "${NO_PROXY}" =~ .*".svc".* ]]; then
 242                 NO_PROXY="${NO_PROXY},.svc"
 243             fi
 244             if [[ ! "${NO_PROXY}" =~ .*".cluster.local".* ]]; then
 245                 NO_PROXY="${NO_PROXY},.cluster.local"
 246             fi
 247             OSM_HELM_OPTS="${OSM_HELM_OPTS} --set global.httpProxy.NO_PROXY=\"${NO_PROXY//,/\,}\""
 248         fi
 249     fi
 250
 251     if [ -n "${INSTALL_JUJU}" ]; then
 252         OSM_HELM_OPTS="-f ${OSM_HELM_WORK_DIR}/osm-values.yaml ${OSM_HELM_OPTS}"
 253     fi
 254     echo "helm upgrade --install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}"
 255     helm upgrade --install -n $OSM_NAMESPACE --create-namespace $OSM_NAMESPACE $OSM_DEVOPS/installers/helm/osm ${OSM_HELM_OPTS}
 256     # Override existing values.yaml with the final values.yaml used to install OSM
 257     helm -n $OSM_NAMESPACE get values $OSM_NAMESPACE | sudo tee -a ${OSM_HELM_WORK_DIR}/osm-values.yaml
 258     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 259 }
 260
 261 #deploy charmed services
 262 function deploy_charmed_services() {
 263     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 264     juju add-model $OSM_NAMESPACE $OSM_VCA_K8S_CLOUDNAME
 265     juju deploy ch:mongodb-k8s -m $OSM_NAMESPACE --channel latest/stable
 266     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 267 }
 268
 269 #deploy mongodb
 270 function deploy_mongodb() {
 271     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 272     MONGO_OPTS="-d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 273     [ -n "${DOCKER_REGISTRY_URL}" ] && MONGO_OPTS="${MONGO_OPTS} -r ${DOCKER_REGISTRY_URL}"
 274     $OSM_DEVOPS/installers/install_mongodb.sh ${MONGO_OPTS} || \
 275     FATAL_TRACK install_osm_mongodb_service "install_mongodb.sh failed"
 276     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 277 }
 278
 279 function install_osm_ngsa_service() {
 280     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 281     NGSA_OPTS="-i ${OSM_DEFAULT_IP} -d ${OSM_HELM_WORK_DIR} -D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -t ${OSM_DOCKER_TAG} -U ${DOCKER_USER} ${DEBUG_INSTALL}"
 282     [ -n "${DOCKER_REGISTRY_URL}" ] && NGSA_OPTS="${NGSA_OPTS} -r ${DOCKER_REGISTRY_URL}"
 283     $OSM_DEVOPS/installers/install_ngsa.sh ${NGSA_OPTS} || \
 284     FATAL_TRACK install_osm_ngsa_service "install_ngsa.sh failed"
 285     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 286 }
 287
 288 function add_local_k8scluster() {
 289     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 290     # OSM_HOSTNAME=$(kubectl get --namespace osm -o jsonpath="{.spec.rules[0].host}" ingress nbi-ingress)
 291     OSM_HOSTNAME="nbi.${OSM_DEFAULT_IP}.nip.io:443"
 292     /usr/bin/osm --hostname ${OSM_HOSTNAME} --all-projects vim-create \
 293       --name _system-osm-vim \
 294       --account_type dummy \
 295       --auth_url http://dummy \
 296       --user osm --password osm --tenant osm \
 297       --description "dummy" \
 298       --config '{management_network_name: mgmt}'
 299     /usr/bin/osm --hostname ${OSM_HOSTNAME} --all-projects k8scluster-add \
 300       --creds ${HOME}/.kube/config \
 301       --vim _system-osm-vim \
 302       --k8s-nets '{"net1": null}' \
 303       --version '1.29' \
 304       --description "OSM Internal Cluster" \
 305       _system-osm-k8s
 306     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 307 }
 308
 309 function configure_apt_proxy() {
 310     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 311     OSM_APT_PROXY=$1
 312     OSM_APT_PROXY_FILE="/etc/apt/apt.conf.d/osm-apt"
 313     echo "Configuring apt proxy in file ${OSM_APT_PROXY_FILE}"
 314     if [ ! -f ${OSM_APT_PROXY_FILE} ]; then
 315         sudo bash -c "cat <<EOF > ${OSM_APT_PROXY}
 316 Acquire::http { Proxy \"${OSM_APT_PROXY}\"; }
 317 EOF"
 318     else
 319         sudo sed -i "s|Proxy.*|Proxy \"${OSM_APT_PROXY}\"; }|" ${OSM_APT_PROXY_FILE}
 320     fi
 321     sudo apt-get update || FATAL "Configured apt proxy, but couldn't run 'apt-get update'. Check ${OSM_APT_PROXY_FILE}"
 322     track prereq apt_proxy_configured_ok
 323     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 324 }
 325
 326 function ask_proceed() {
 327     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 328
 329     [ -z "$ASSUME_YES" ] && ! ask_user "The installation will do the following
 330     1. Install and configure LXD
 331     2. Install juju
 332     3. Install docker CE
 333     4. Disable swap space
 334     5. Install and initialize Kubernetes
 335     as pre-requirements.
 336     Do you want to proceed (Y/n)? " y && echo "Cancelled!" && exit 1
 337
 338     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 339 }
 340
 341 function check_osm_behind_proxy() {
 342     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 343
 344     export OSM_BEHIND_PROXY=""
 345     export OSM_PROXY_ENV_VARIABLES=""
 346     [ -n "${http_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "http_proxy=${http_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} http_proxy"
 347     [ -n "${https_proxy}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${https_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} https_proxy"
 348     [ -n "${HTTP_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "HTTP_PROXY=${HTTP_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTP_PROXY"
 349     [ -n "${HTTPS_PROXY}" ] && OSM_BEHIND_PROXY="y" && echo "https_proxy=${HTTPS_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} HTTPS_PROXY"
 350     [ -n "${no_proxy}" ] && echo "no_proxy=${no_proxy}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} no_proxy"
 351     [ -n "${NO_PROXY}" ] && echo "NO_PROXY=${NO_PROXY}" && OSM_PROXY_ENV_VARIABLES="${OSM_PROXY_ENV_VARIABLES} NO_PROXY"
 352
 353     echo "OSM_BEHIND_PROXY=${OSM_BEHIND_PROXY}"
 354     echo "OSM_PROXY_ENV_VARIABLES=${OSM_PROXY_ENV_VARIABLES}"
 355
 356     if [ -n "${OSM_BEHIND_PROXY}" ]; then
 357         [ -z "$ASSUME_YES" ] && ! ask_user "
 358 The following env variables have been found for the current user:
 359 ${OSM_PROXY_ENV_VARIABLES}.
 360
 361 This suggests that this machine is behind a proxy and a special configuration is required.
 362 The installer will install Docker CE, LXD and Juju to work behind a proxy using those
 363 env variables.
 364
 365 Take into account that the installer uses apt, curl, wget, docker, lxd, juju and snap.
 366 Depending on the program, the env variables to work behind a proxy might be different
 367 (e.g. http_proxy vs HTTP_PROXY).
 368
 369 For that reason, it is strongly recommended that at least http_proxy, https_proxy, HTTP_PROXY
 370 and HTTPS_PROXY are defined.
 371
 372 Finally, some of the programs (apt, snap) those programs are run as sudoer, requiring that
 373 those env variables are also set for root user. If you are not sure whether those variables
 374 are configured for the root user, you can stop the installation now.
 375
 376 Do you want to proceed with the installation (Y/n)? " y && echo "Cancelled!" && exit 1
 377     else
 378         echo "This machine is not behind a proxy"
 379     fi
 380
 381     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 382 }
 383
 384 function find_devops_folder() {
 385     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 386     if [ -z "$OSM_DEVOPS" ]; then
 387         if [ -n "$TEST_INSTALLER" ]; then
 388             echo -e "\nUsing local devops repo for OSM installation"
 389             OSM_DEVOPS="$(dirname $(realpath $(dirname $0)))"
 390         else
 391             echo -e "\nCreating temporary dir for OSM installation"
 392             OSM_DEVOPS="$(mktemp -d -q --tmpdir "installosm.XXXXXX")"
 393             trap 'rm -rf "$OSM_DEVOPS"' EXIT
 394             git clone https://osm.etsi.org/gerrit/osm/devops.git $OSM_DEVOPS
 395         fi
 396     fi
 397     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 398 }
 399
 400 function install_lxd() {
 401     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 402     LXD_INSTALL_OPTS="-D ${OSM_DEVOPS} -i ${OSM_DEFAULT_IF} ${DEBUG_INSTALL}"
 403     [ -n "${OSM_BEHIND_PROXY}" ] && LXD_INSTALL_OPTS="${LXD_INSTALL_OPTS} -P"
 404     $OSM_DEVOPS/installers/install_lxd.sh ${LXD_INSTALL_OPTS} || FATAL_TRACK lxd "install_lxd.sh failed"
 405     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 406 }
 407
 408 function install_docker_ce() {
 409     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 410     DOCKER_CE_OPTS="-D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 411     [ -n "${DOCKER_PROXY_URL}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -p ${DOCKER_PROXY_URL}"
 412     [ -n "${OSM_BEHIND_PROXY}" ] && DOCKER_CE_OPTS="${DOCKER_CE_OPTS} -P"
 413     $OSM_DEVOPS/installers/install_docker_ce.sh ${DOCKER_CE_OPTS} || FATAL_TRACK docker_ce "install_docker_ce.sh failed"
 414     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 415 }
 416
 417 function install_k8s_cluster() {
 418     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 419     if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 420         KUBEADM_INSTALL_OPTS="-d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 421         $OSM_DEVOPS/installers/install_kubeadm_cluster.sh ${KUBEADM_INSTALL_OPTS} || \
 422         FATAL_TRACK k8scluster "install_kubeadm_cluster.sh failed"
 423         K8SCLUSTER_ADDONS_INSTALL_OPTS="-i ${OSM_DEFAULT_IP} -d ${OSM_WORK_DIR} -D ${OSM_DEVOPS} ${DEBUG_INSTALL}"
 424         $OSM_DEVOPS/installers/install_cluster_addons.sh ${K8SCLUSTER_ADDONS_INSTALL_OPTS} || \
 425         FATAL_TRACK k8scluster "install_cluster_addons.sh failed"
 426     fi
 427     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 428 }
 429
 430 function deploy_osm() {
 431     deploy_mongodb
 432     track deploy_osm deploy_mongodb_ok
 433     deploy_osm_helm_chart
 434     track deploy_osm deploy_osm_services_k8s_ok
 435     if [ -n "$INSTALL_NGSA" ]; then
 436         # optional NGSA install
 437         install_osm_ngsa_service
 438         track deploy_osm install_osm_ngsa_ok
 439     fi
 440 }
 441
 442 function install_osm() {
 443     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 444
 445     trap ctrl_c INT
 446
 447     check_osm_behind_proxy
 448     check_packages "git wget curl tar snapd"
 449     if [ -n "${INSTALL_JUJU}" ]; then
 450         sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 451     fi
 452     find_devops_folder
 453
 454     track start release $RELEASE none none docker_tag $OSM_DOCKER_TAG none none installation_type $OSM_INSTALLATION_TYPE none none os_info $os_info none none
 455
 456     track checks checkingroot_ok
 457     [ "$USER" == "root" ] && FATAL "You are running the installer as root. The installer is prepared to be executed as a normal user with sudo privileges."
 458     track checks noroot_ok
 459     ask_proceed
 460     track checks proceed_ok
 461
 462     echo "Installing OSM"
 463
 464     [ -n "$DOCKER_REGISTRY_URL" ] && parse_docker_registry_url
 465
 466     echo "Determining IP address of the interface with the default route"
 467     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(ip route list|awk '$1=="default" {print $5; exit}')
 468     [ -z "$OSM_DEFAULT_IF" ] && OSM_DEFAULT_IF=$(route -n |awk '$1~/^0.0.0.0/ {print $8; exit}')
 469     [ -z "$OSM_DEFAULT_IF" ] && FATAL "Not possible to determine the interface with the default route 0.0.0.0"
 470     OSM_DEFAULT_IP=`ip -o -4 a s ${OSM_DEFAULT_IF} |awk '{split($4,a,"/"); print a[1]; exit}'`
 471     [ -z "$OSM_DEFAULT_IP" ] && FATAL "Not possible to determine the IP address of the interface with the default route"
 472
 473     # configure apt proxy
 474     [ -n "$APT_PROXY_URL" ] && configure_apt_proxy $APT_PROXY_URL
 475
 476     # if lxd is requested, we will install it
 477     [ -n "$INSTALL_LXD" ] && install_lxd
 478
 479     track prereq prereqok_ok
 480
 481     if [ -n "$INSTALL_DOCKER" ] || [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 482         if [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ]; then
 483             echo "Kubeadm requires docker, so docker will be installed."
 484         fi
 485         install_docker_ce
 486     fi
 487     track docker_ce docker_ce_ok
 488
 489     $OSM_DEVOPS/installers/install_helm_client.sh -D ${OSM_DEVOPS} ${DEBUG_INSTALL} || \
 490     FATAL_TRACK k8scluster "install_helm_client.sh failed"
 491     track helm_client install_helm_client_ok
 492
 493     install_k8s_cluster
 494     track k8scluster k8scluster_ok
 495
 496     if [ -n "${INSTALL_JUJU}" ]; then
 497         JUJU_OPTS="-D ${OSM_DEVOPS} -s ${OSM_NAMESPACE} -i ${OSM_DEFAULT_IP} ${DEBUG_INSTALL} ${INSTALL_CACHELXDIMAGES}"
 498         [ -n "${OSM_VCA_HOST}" ] && JUJU_OPTS="$JUJU_OPTS -H ${OSM_VCA_HOST}"
 499         [ -n "${LXD_CLOUD_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -l ${LXD_CLOUD_FILE}"
 500         [ -n "${LXD_CRED_FILE}" ] && JUJU_OPTS="$JUJU_OPTS -L ${LXD_CRED_FILE}"
 501         [ -n "${CONTROLLER_NAME}" ] && JUJU_OPTS="$JUJU_OPTS -K ${CONTROLLER_NAME}"
 502         [ -n "${OSM_BEHIND_PROXY}" ] && JUJU_OPTS="${JUJU_OPTS} -P"
 503         $OSM_DEVOPS/installers/install_juju.sh ${JUJU_OPTS} || FATAL_TRACK juju "install_juju.sh failed"
 504         set_vca_variables
 505     fi
 506     track juju juju_ok
 507
 508     # This track is maintained for backwards compatibility
 509     track docker_images docker_images_ok
 510
 511     # Deploy OSM (mongodb, OSM helm chart, NGSA)
 512     deploy_osm
 513
 514     if [ -n "$INSTALL_K8S_MONITOR" ]; then
 515         # install OSM MONITORING
 516         install_k8s_monitoring
 517         track deploy_osm install_k8s_monitoring_ok
 518     fi
 519
 520     [ -z "$INSTALL_NOHOSTCLIENT" ] && install_osmclient
 521     track osmclient osmclient_ok
 522
 523     echo -e "Checking OSM health state..."
 524     $OSM_DEVOPS/installers/osm_health.sh -s ${OSM_NAMESPACE} -k || \
 525     (echo -e "OSM is not healthy, but will probably converge to a healthy state soon." && \
 526     echo -e "Check OSM status with: kubectl -n ${OSM_NAMESPACE} get all" && \
 527     track healthchecks osm_unhealthy didnotconverge)
 528     track healthchecks after_healthcheck_ok
 529
 530     add_local_k8scluster
 531     track final_ops add_local_k8scluster_ok
 532
 533     # if lxd is requested, iptables firewall is updated to work with both docker and LXD
 534     if [ -n "$INSTALL_LXD" ]; then
 535         arrange_docker_default_network_policy
 536     fi
 537
 538     wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
 539     track end
 540     sudo find /etc/osm
 541     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 542     return 0
 543 }
 544
 545 function install_to_openstack() {
 546     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 547
 548     if [ -z "$2" ]; then
 549         FATAL "OpenStack installer requires a valid external network name"
 550     fi
 551
 552     # Install Pip for Python3
 553     sudo apt install -y python3-pip python3-venv
 554     sudo -H LC_ALL=C python3 -m pip install -U pip
 555
 556     # Create a venv to avoid conflicts with the host installation
 557     python3 -m venv $OPENSTACK_PYTHON_VENV
 558
 559     source $OPENSTACK_PYTHON_VENV/bin/activate
 560
 561     # Install Ansible, OpenStack client and SDK, latest openstack version supported is Train
 562     python -m pip install -U wheel
 563     python -m pip install -U "python-openstackclient<=4.0.2" "openstacksdk>=0.12.0,<=0.36.2" "ansible>=2.10,<2.11"
 564
 565     # Install the Openstack cloud module (ansible>=2.10)
 566     ansible-galaxy collection install openstack.cloud
 567
 568     export ANSIBLE_CONFIG="$OSM_DEVOPS/installers/openstack/ansible.cfg"
 569
 570     OSM_INSTALLER_ARGS="${REPO_ARGS[@]}"
 571
 572     ANSIBLE_VARS="external_network_name=$2 setup_volume=$3 server_name=$OPENSTACK_VM_NAME"
 573
 574     if [ -n "$OPENSTACK_SSH_KEY_FILE" ]; then
 575         ANSIBLE_VARS+=" key_file=$OPENSTACK_SSH_KEY_FILE"
 576     fi
 577
 578     if [ -n "$OPENSTACK_USERDATA_FILE" ]; then
 579         ANSIBLE_VARS+=" userdata_file=$OPENSTACK_USERDATA_FILE"
 580     fi
 581
 582     # Execute the Ansible playbook based on openrc or clouds.yaml
 583     if [ -e "$1" ]; then
 584         . $1
 585         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 586         $OSM_DEVOPS/installers/openstack/site.yml
 587     else
 588         ansible-playbook -e installer_args="\"$OSM_INSTALLER_ARGS\"" -e "$ANSIBLE_VARS" \
 589         -e cloud_name=$1 $OSM_DEVOPS/installers/openstack/site.yml
 590     fi
 591
 592     # Exit from venv
 593     deactivate
 594
 595     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 596     return 0
 597 }
 598
 599 function arrange_docker_default_network_policy() {
 600     echo -e "Fixing firewall so docker and LXD can share the same host without affecting each other."
 601     sudo iptables -I DOCKER-USER -j ACCEPT
 602     sudo iptables-save | sudo tee /etc/iptables/rules.v4
 603     sudo ip6tables-save | sudo tee /etc/iptables/rules.v6
 604 }
 605
 606 function install_k8s_monitoring() {
 607     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 608     # install OSM monitoring
 609     sudo $OSM_DEVOPS/installers/k8s/install_osm_k8s_monitoring.sh -o ${OSM_NAMESPACE} || FATAL_TRACK install_k8s_monitoring "k8s/install_osm_k8s_monitoring.sh failed"
 610     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 611 }
 612
 613 function dump_vars(){
 614     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 615     echo "APT_PROXY_URL=$APT_PROXY_URL"
 616     echo "K8S_CLUSTER_ENGINE=$K8S_CLUSTER_ENGINE"
 617     echo "DEBUG_INSTALL=$DEBUG_INSTALL"
 618     echo "DOCKER_PROXY_URL=$DOCKER_PROXY_URL"
 619     echo "DOCKER_REGISTRY_URL=$DOCKER_REGISTRY_URL"
 620     echo "DOCKER_USER=$DOCKER_USER"
 621     echo "INSTALL_CACHELXDIMAGES=$INSTALL_CACHELXDIMAGES"
 622     echo "INSTALL_JUJU=$INSTALL_JUJU"
 623     echo "INSTALL_K8S_MONITOR=$INSTALL_K8S_MONITOR"
 624     echo "INSTALL_LXD=$INSTALL_LXD"
 625     echo "INSTALL_NGSA=$INSTALL_NGSA"
 626     echo "INSTALL_DOCKER=$INSTALL_DOCKER"
 627     echo "INSTALL_ONLY=$INSTALL_ONLY"
 628     echo "INSTALL_ONLY_DEPLOY_OSM=$INSTALL_ONLY_DEPLOY_OSM"
 629     echo "INSTALL_ONLY_DOCKER_CE=$INSTALL_ONLY_DOCKER_CE"
 630     echo "INSTALL_ONLY_K8S_CLUSTER=$INSTALL_ONLY_K8S_CLUSTER"
 631     echo "INSTALL_ONLY_NGSA=$INSTALL_ONLY_NGSA"
 632     echo "INSTALL_PLA=$INSTALL_PLA"
 633     echo "INSTALL_TO_OPENSTACK=$INSTALL_TO_OPENSTACK"
 634     echo "INSTALL_VIMEMU=$INSTALL_VIMEMU"
 635     echo "NO_HOST_PORTS=$NO_HOST_PORTS"
 636     echo "OPENSTACK_PUBLIC_NET_NAME=$OPENSTACK_PUBLIC_NET_NAME"
 637     echo "OPENSTACK_OPENRC_FILE_OR_CLOUD=$OPENSTACK_OPENRC_FILE_OR_CLOUD"
 638     echo "OPENSTACK_ATTACH_VOLUME=$OPENSTACK_ATTACH_VOLUME"
 639     echo "OPENSTACK_SSH_KEY_FILE"="$OPENSTACK_SSH_KEY_FILE"
 640     echo "OPENSTACK_USERDATA_FILE"="$OPENSTACK_USERDATA_FILE"
 641     echo "OPENSTACK_VM_NAME"="$OPENSTACK_VM_NAME"
 642     echo "OSM_DEVOPS=$OSM_DEVOPS"
 643     echo "OSM_DOCKER_TAG=$OSM_DOCKER_TAG"
 644     echo "OSM_HELM_WORK_DIR=$OSM_HELM_WORK_DIR"
 645     echo "OSM_NAMESPACE=$OSM_NAMESPACE"
 646     echo "OSM_VCA_HOST=$OSM_VCA_HOST"
 647     echo "OSM_VCA_PUBKEY=$OSM_VCA_PUBKEY"
 648     echo "OSM_VCA_SECRET=$OSM_VCA_SECRET"
 649     echo "OSM_WORK_DIR=$OSM_WORK_DIR"
 650     echo "PULL_IMAGES=$PULL_IMAGES"
 651     echo "RECONFIGURE=$RECONFIGURE"
 652     echo "RELEASE=$RELEASE"
 653     echo "REPOSITORY=$REPOSITORY"
 654     echo "REPOSITORY_BASE=$REPOSITORY_BASE"
 655     echo "REPOSITORY_KEY=$REPOSITORY_KEY"
 656     echo "SHOWOPTS=$SHOWOPTS"
 657     echo "TEST_INSTALLER=$TEST_INSTALLER"
 658     echo "UNINSTALL=$UNINSTALL"
 659     echo "UPDATE=$UPDATE"
 660     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 661 }
 662
 663 function parse_docker_registry_url() {
 664     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 665     DOCKER_REGISTRY_USER=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[1]}')
 666     DOCKER_REGISTRY_PASSWORD=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); split(a[1],b,":"); print b[2]}')
 667     DOCKER_REGISTRY_URL=$(echo "$DOCKER_REGISTRY_URL" | awk '{split($1,a,"@"); print a[2]}')
 668     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 669 }
 670
 671 function ctrl_c() {
 672     [ -z "${DEBUG_INSTALL}" ] || DEBUG beginning of function
 673     echo "** Trapped CTRL-C"
 674     FATAL "User stopped the installation"
 675     [ -z "${DEBUG_INSTALL}" ] || DEBUG end of function
 676 }
 677
 678 UNINSTALL=""
 679 UPDATE=""
 680 RECONFIGURE=""
 681 TEST_INSTALLER=""
 682 INSTALL_LXD=""
 683 SHOWOPTS=""
 684 ASSUME_YES=""
 685 APT_PROXY_URL=""
 686 K8S_CLUSTER_ENGINE="kubeadm"
 687 DEBUG_INSTALL=""
 688 RELEASE="testing-daily"
 689 REPOSITORY="testing"
 690 INSTALL_K8S_MONITOR=""
 691 INSTALL_NGSA="y"
 692 INSTALL_PLA=""
 693 INSTALL_VIMEMU=""
 694 LXD_REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/lxd"
 695 LXD_REPOSITORY_PATH=""
 696 INSTALL_TO_OPENSTACK=""
 697 OPENSTACK_OPENRC_FILE_OR_CLOUD=""
 698 OPENSTACK_PUBLIC_NET_NAME=""
 699 OPENSTACK_ATTACH_VOLUME="false"
 700 OPENSTACK_SSH_KEY_FILE=""
 701 OPENSTACK_USERDATA_FILE=""
 702 OPENSTACK_VM_NAME="server-osm"
 703 OPENSTACK_PYTHON_VENV="$HOME/.virtual-envs/osm"
 704 INSTALL_ONLY=""
 705 INSTALL_ONLY_DEPLOY_OSM=""
 706 INSTALL_ONLY_DOCKER_CE=""
 707 INSTALL_ONLY_K8S_CLUSTER=""
 708 INSTALL_ONLY_NGSA=""
 709 INSTALL_DOCKER=""
 710 INSTALL_JUJU=""
 711 INSTALL_NOHOSTCLIENT=""
 712 INSTALL_CACHELXDIMAGES=""
 713 OSM_DEVOPS=
 714 OSM_VCA_HOST=
 715 OSM_VCA_SECRET=
 716 OSM_VCA_PUBKEY=
 717 OSM_VCA_CLOUDNAME="localhost"
 718 OSM_VCA_K8S_CLOUDNAME="k8scloud"
 719 OSM_NAMESPACE=osm
 720 NO_HOST_PORTS=""
 721 REPOSITORY_KEY="OSM%20ETSI%20Release%20Key.gpg"
 722 REPOSITORY_BASE="https://osm-download.etsi.org/repository/osm/debian"
 723 OSM_WORK_DIR="/etc/osm"
 724 OSM_HELM_WORK_DIR="${OSM_WORK_DIR}/helm"
 725 OSM_HOST_VOL="/var/lib/osm"
 726 OSM_NAMESPACE_VOL="${OSM_HOST_VOL}/${OSM_NAMESPACE}"
 727 OSM_DOCKER_TAG="testing-daily"
 728 DOCKER_USER=opensourcemano
 729 PULL_IMAGES="y"
 730 KAFKA_TAG=2.11-1.0.2
 731 KIWIGRID_K8S_SIDECAR_TAG="1.15.6"
 732 PROMETHEUS_TAG=v2.28.1
 733 GRAFANA_TAG=8.1.1
 734 PROMETHEUS_NODE_EXPORTER_TAG=0.18.1
 735 PROMETHEUS_CADVISOR_TAG=latest
 736 KEYSTONEDB_TAG=10
 737 OSM_DATABASE_COMMONKEY=
 738 ELASTIC_VERSION=6.4.2
 739 ELASTIC_CURATOR_VERSION=5.5.4
 740 POD_NETWORK_CIDR=10.244.0.0/16
 741 K8S_MANIFEST_DIR="/etc/kubernetes/manifests"
 742 RE_CHECK='^[a-z0-9]([-a-z0-9]*[a-z0-9])?$'
 743 DOCKER_REGISTRY_URL=
 744 DOCKER_PROXY_URL=
 745 MODULE_DOCKER_TAG=
 746 OSM_INSTALLATION_TYPE="Default"
 747
 748 while getopts ":a:c:r:n:k:u:R:D:o:O:N:H:S:s:t:U:P:A:l:L:K:d:p:T:f:F:-: hy" o; do
 749     case "${o}" in
 750         a)
 751             APT_PROXY_URL=${OPTARG}
 752             ;;
 753         c)
 754             K8S_CLUSTER_ENGINE=${OPTARG}
 755             [ "${K8S_CLUSTER_ENGINE}" == "kubeadm" ] && continue
 756             [ "${K8S_CLUSTER_ENGINE}" == "k3s" ] && continue
 757             [ "${K8S_CLUSTER_ENGINE}" == "microk8s" ] && continue
 758             echo -e "Invalid argument for -c : ' ${K8S_CLUSTER_ENGINE}'\n" >&2
 759             usage && exit 1
 760             ;;
 761         r)
 762             REPOSITORY="${OPTARG}"
 763             REPO_ARGS+=(-r "$REPOSITORY")
 764             ;;
 765         k)
 766             REPOSITORY_KEY="${OPTARG}"
 767             REPO_ARGS+=(-k "$REPOSITORY_KEY")
 768             ;;
 769         u)
 770             REPOSITORY_BASE="${OPTARG}"
 771             REPO_ARGS+=(-u "$REPOSITORY_BASE")
 772             ;;
 773         R)
 774             RELEASE="${OPTARG}"
 775             REPO_ARGS+=(-R "$RELEASE")
 776             ;;
 777         D)
 778             OSM_DEVOPS="${OPTARG}"
 779             ;;
 780         o)
 781             INSTALL_ONLY="y"
 782             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 783             [ "${OPTARG}" == "ng-sa" ] && INSTALL_ONLY_NGSA="y" && continue
 784             [ "${OPTARG}" == "docker" ] && INSTALL_ONLY_DOCKER_CE="y" && continue
 785             [ "${OPTARG}" == "k8scluster" ] && INSTALL_ONLY_K8S_CLUSTER="y" && continue
 786             [ "${OPTARG}" == "deploy-osm" ] && INSTALL_ONLY_DEPLOY_OSM="y" && continue
 787             ;;
 788         O)
 789             INSTALL_TO_OPENSTACK="y"
 790             if [ -n "${OPTARG}" ]; then
 791                 OPENSTACK_OPENRC_FILE_OR_CLOUD="${OPTARG}"
 792             else
 793                 echo -e "Invalid argument for -O : ' $OPTARG'\n" >&2
 794                 usage && exit 1
 795             fi
 796             ;;
 797         f)
 798             OPENSTACK_SSH_KEY_FILE="${OPTARG}"
 799             ;;
 800         F)
 801             OPENSTACK_USERDATA_FILE="${OPTARG}"
 802             ;;
 803         N)
 804             OPENSTACK_PUBLIC_NET_NAME="${OPTARG}"
 805             ;;
 806         H)
 807             OSM_VCA_HOST="${OPTARG}"
 808             ;;
 809         S)
 810             OSM_VCA_SECRET="${OPTARG}"
 811             ;;
 812         s)
 813             OSM_NAMESPACE="${OPTARG}" && [[ ! "${OPTARG}" =~ $RE_CHECK ]] && echo "Namespace $OPTARG is invalid. Regex used for validation is $RE_CHECK" && exit 0
 814             ;;
 815         t)
 816             OSM_DOCKER_TAG="${OPTARG}"
 817             REPO_ARGS+=(-t "$OSM_DOCKER_TAG")
 818             ;;
 819         U)
 820             DOCKER_USER="${OPTARG}"
 821             ;;
 822         P)
 823             OSM_VCA_PUBKEY=$(cat ${OPTARG})
 824             ;;
 825         A)
 826             OSM_VCA_APIPROXY="${OPTARG}"
 827             ;;
 828         l)
 829             LXD_CLOUD_FILE="${OPTARG}"
 830             ;;
 831         L)
 832             LXD_CRED_FILE="${OPTARG}"
 833             ;;
 834         K)
 835             CONTROLLER_NAME="${OPTARG}"
 836             ;;
 837         d)
 838             DOCKER_REGISTRY_URL="${OPTARG}"
 839             ;;
 840         p)
 841             DOCKER_PROXY_URL="${OPTARG}"
 842             ;;
 843         T)
 844             MODULE_DOCKER_TAG="${OPTARG}"
 845             ;;
 846         -)
 847             [ "${OPTARG}" == "help" ] && usage && exit 0
 848             [ "${OPTARG}" == "debug" ] && DEBUG_INSTALL="--debug" && continue
 849             [ "${OPTARG}" == "uninstall" ] && UNINSTALL="y" && continue
 850             [ "${OPTARG}" == "update" ] && UPDATE="y" && continue
 851             [ "${OPTARG}" == "reconfigure" ] && RECONFIGURE="y" && continue
 852             [ "${OPTARG}" == "test" ] && TEST_INSTALLER="y" && continue
 853             [ "${OPTARG}" == "lxdinstall" ] && INSTALL_LXD="y" && continue
 854             [ "${OPTARG}" == "lxd" ] && INSTALL_LXD="y" && continue
 855             [ "${OPTARG}" == "nolxd" ] && INSTALL_LXD="" && continue
 856             [ "${OPTARG}" == "docker" ] && INSTALL_DOCKER="y" && continue
 857             [ "${OPTARG}" == "nodocker" ] && INSTALL_DOCKER="" && continue
 858             [ "${OPTARG}" == "showopts" ] && SHOWOPTS="y" && continue
 859             [ "${OPTARG}" == "nohostports" ] && NO_HOST_PORTS="y" && continue
 860             [ "${OPTARG}" == "juju" ] && INSTALL_JUJU="y" && continue
 861             [ "${OPTARG}" == "nojuju" ] && INSTALL_JUJU="" && continue
 862             [ "${OPTARG}" == "nohostclient" ] && INSTALL_NOHOSTCLIENT="y" && continue
 863             [ "${OPTARG}" == "k8s_monitor" ] && INSTALL_K8S_MONITOR="y" && continue
 864             [ "${OPTARG}" == "charmed" ] && CHARMED="y" && OSM_INSTALLATION_TYPE="Charmed" && continue
 865             [ "${OPTARG}" == "bundle" ] && continue
 866             [ "${OPTARG}" == "k8s" ] && continue
 867             [ "${OPTARG}" == "lxd-cred" ] && continue
 868             [ "${OPTARG}" == "microstack" ] && continue
 869             [ "${OPTARG}" == "overlay" ] && continue
 870             [ "${OPTARG}" == "only-vca" ] && continue
 871             [ "${OPTARG}" == "small-profile" ] && continue
 872             [ "${OPTARG}" == "vca" ] && continue
 873             [ "${OPTARG}" == "ha" ] && continue
 874             [ "${OPTARG}" == "tag" ] && continue
 875             [ "${OPTARG}" == "registry" ] && continue
 876             [ "${OPTARG}" == "pla" ] && INSTALL_PLA="y" && continue
 877             [ "${OPTARG}" == "old-sa" ] && INSTALL_NGSA="" && continue
 878             [ "${OPTARG}" == "ng-sa" ] && INSTALL_NGSA="y" && continue
 879             [ "${OPTARG}" == "volume" ] && OPENSTACK_ATTACH_VOLUME="true" && continue
 880             [ "${OPTARG}" == "nocachelxdimages" ] && continue
 881             [ "${OPTARG}" == "cachelxdimages" ] && INSTALL_CACHELXDIMAGES="--cachelxdimages" && continue
 882             echo -e "Invalid option: '--$OPTARG'\n" >&2
 883             usage && exit 1
 884             ;;
 885         :)
 886             echo "Option -$OPTARG requires an argument" >&2
 887             usage && exit 1
 888             ;;
 889         \?)
 890             echo -e "Invalid option: '-$OPTARG'\n" >&2
 891             usage && exit 1
 892             ;;
 893         h)
 894             usage && exit 0
 895             ;;
 896         y)
 897             ASSUME_YES="y"
 898             ;;
 899         *)
 900             usage && exit 1
 901             ;;
 902     esac
 903 done
 904
 905 source $OSM_DEVOPS/common/all_funcs
 906
 907 [ -z "${DEBUG_INSTALL}" ] || DEBUG Debug is on
 908 [ -n "$SHOWOPTS" ] && dump_vars && exit 0
 909
 910 # Uninstall if "--uninstall"
 911 if [ -n "$UNINSTALL" ]; then
 912     if [ -n "$CHARMED" ]; then
 913         ${OSM_DEVOPS}/installers/charmed_uninstall.sh -R $RELEASE -r $REPOSITORY -u $REPOSITORY_BASE -D $OSM_DEVOPS -t $DOCKER_TAG "$@" || \
 914         FATAL_TRACK charmed_uninstall "charmed_uninstall.sh failed"
 915     else
 916         ${OSM_DEVOPS}/installers/uninstall_osm.sh "$@" || \
 917         FATAL_TRACK community_uninstall "uninstall_osm.sh failed"
 918     fi
 919     echo -e "\nDONE"
 920     exit 0
 921 fi
 922
 923 # Installation starts here
 924
 925 # Get README and create OSM_TRACK_INSTALLATION_ID
 926 wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README.txt &> /dev/null
 927 export OSM_TRACK_INSTALLATION_ID="$(date +%s)-$(head /dev/urandom | tr -dc A-Za-z0-9 | head -c 16)"
 928
 929 # Get OS info to be tracked
 930 os_distro=$(lsb_release -i 2>/dev/null | awk '{print $3}')
 931 echo $os_distro
 932 os_release=$(lsb_release -r 2>/dev/null | awk '{print $2}')
 933 echo $os_release
 934 os_info="${os_distro}_${os_release}"
 935 os_info="${os_info// /_}"
 936
 937 if [ -n "$CHARMED" ]; then
 938     # Charmed installation
 939     sudo snap install jq || FATAL "Could not install jq (snap package). Make sure that snap works"
 940     ${OSM_DEVOPS}/installers/charmed_install.sh --tag $OSM_DOCKER_TAG "$@" || \
 941     FATAL_TRACK charmed_install "charmed_install.sh failed"
 942     wget -q -O- https://osm-download.etsi.org/ftp/osm-15.0-fifteen/README2.txt &> /dev/null
 943     echo -e "\nDONE"
 944     exit 0
 945 elif [ -n "$INSTALL_TO_OPENSTACK" ]; then
 946     # Installation to Openstack
 947     install_to_openstack $OPENSTACK_OPENRC_FILE_OR_CLOUD $OPENSTACK_PUBLIC_NET_NAME $OPENSTACK_ATTACH_VOLUME
 948     echo -e "\nDONE"
 949     exit 0
 950 else
 951     # Community_installer
 952     # Special cases go first
 953     if [ -n "$INSTALL_ONLY" ]; then
 954         [ -n "$INSTALL_ONLY_DOCKER_CE" ] && install_docker_ce
 955         [ -n "$INSTALL_ONLY_K8S_CLUSTER" ] && install_k8s_cluster
 956         [ -n "$INSTALL_K8S_MONITOR" ] && install_k8s_monitoring
 957         [ -n "$INSTALL_ONLY_DEPLOY_OSM" ] && deploy_osm
 958         [ -n "$INSTALL_ONLY_NGSA" ] && install_osm_ngsa_service
 959         echo -e "\nDONE" && exit 0
 960     fi
 961     # This is where installation starts
 962     install_osm
 963     echo -e "\nDONE"
 964     exit 0
 965 fi